IPhone 4, shut down and will not power back on

iPhone 4 shut down and will not power back up

Try a reset: Hold down the home button along with the sleep/wake button until you see the apple, then let go.

Similar Messages

  • HT4993 my iphone just shut down and will not turn back on can anyone help or dod I need to go to the apple store for help....

    NEED HELP PHONE SHUT DOWN AND WILL NOT TURN ON. IT IS PLUGGED IN BUT WONT POWER ON THERE IS NO PROBLEM WITH THE CHARGER I HAVE TRYED 3 DIFFERENT ONES CAN ANYONE HELP OR DO I NEED THE APPLE STORE??????

    Hello jaicob1990,
    Try the steps in the article below; it will give you multiple options on how to resolve the issue.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Satellite s50t-a Laptop shut down and will not power back up...

    Two year old laptop has performed well to date...  Two days  ago, I watched a movie, and then shut down the laptop.  The next day, i pushed the power button to power it back up and nothing happened - no lights, no screen, no sound.  The battery was fully charged and the laptop was connected to the power cord.  Any ideas how to restart this thing?

    Try these suggestions:
    What can I do if my Windows 8 laptop won't start?

  • Hi all ..my sons iphone just shut down and will not power up ..is fully charged..

    can anyone tell me if there is any way to jump start it ?????

    Try a reset by pressing and holding the home and power buttons for 15-20 seconds.

  • HT1222 I started the lastest iPhone 5s software update then my phone just shut down and will not turn back on. I've tried the home button, the button plus the top right button together for 20 sec, plug it in and nothing

    I started the lastest iPhone 5s software update then my phone just shut down and will not turn back on. I've tried the home button, the button plus the top right button together for 20 sec, plug it in and nothing

    Plug your device into the original charger & block in a wall outlet and leave it alone for a couple of hours. Then, while it is still plugged in, restart it by holding down the home button and the power button for 10-15 seconds until you see the Apple, then let go.

  • HT1766 My iPhone 4S suddenly shut down and will not come back on.  Does anyone have an answer for this problem?

    My iPhone shut down and will not come back on. Can anyone give me an answer on how to correct this problem?

    Connect to a wall outlet so you have solid power, then do a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.

  • My IBOOK has shut down, and will not start back up

    ok here is what has happened. yesterday my 1.2ghz g4 ibook started randomly shutting down. it would shut down and it would take a while of me pushing the power button to get it to start back up. when it would come on, it would switch between charging and not charged quite rapidly even though my power cord was in. now however, it has shut down and will not start up. the battery is fully charged. anyone have any ideas?

    I'm telling you. I have lost all faith with Apple. The old iBook I had, 800MHz G4, simply worked fine with no problem waking up or starting up, although it's just a bit slow. Now, I am super frustrated when it just couldn't wake up, either with the sleep light flashing or not, ie it's black screen initially and when I press the Power button once to get it back to life, it just stays black!!!
    So the only thing to do is to force power down by pressing the Power button for 10 seconds. Then I press the Power button once to start up, but it just stays black screen. I've left my iBook in that state for a day now, hoping that it will come back alife. But no! And the worst is, I had a similar problem starting up from wake just the day before. I called the Help Desk and they advised me step by step, from taking out the battery, to pressing OptionsCommand+PR, and OptionsCommand+OC, and doing Apple Hardware Test. The iBook seems to just work fine while on the phone with them. And barely 3 hours later, the thing just couldn't wake up. I've powered down and up many times now, and I've left it powering up, but still black screen till now (one day already).
    Finding out about resetting PMU on the support page, I've also tried that, but it still can't work.
    And you know what? I've sent this unit for repair 3 times already! First they say it's the HDD problem, so they changed that. Then when it still happened, they say it's the logic board problem, so they changed that for me. And again when it happened, they changed another logic board for me. So now, it's the fourth time, what do you think I should do? I don't think going back changing another logic board will help!
    I am in fact ****** off! If Macs are great, then why me? Why my iBook? I am telling this forum that we cannot accept a big corporation giving us sub-standard products. I've since read this forum carefully and found that many of us faced the same problem! We just cannot sit down idly and let the company get away with it. This is a warning to fellow users out there that face this same problem. Let us voice out our frustrations and make Apple give us some compensation for it. I say this because I depend on my laptop iBook for presentation to clients, and this happened exactly twice when I was in front of my clients. I don't mind losing face but can Apple compensate me for my loss of business and future business from my clients?
    Voice out strongly your unhappiness to Apple now!

  • Ipod touch was working, shut down and will not power up

    Ipod was working. Went dead and will not power up. The unit was charged. I connect it to a charger and I get nothing. Tried the power and home button combo but the unit is not responding. It is less than 6 months old

    Try restoring the iPod via iTunes on your computer.  If iTunes does not see the iPod:
    - place the iPod in recovery mode.  See:
    iPhone and iPod touch: Unable to update or restore
    - If not successfull, try placing the iPod in DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Droid 2 Global Shut down and will not turn back on

    My D2G shut down earlier today and will not turn back on. I was listening to music and it shut down in the middle of playing.  If i plug it into a charger at first it does nothing (the charging light doesn't even come on), then after a while the backlight will come on, but nothing else happens. I have tried removing the battery. I've tried charging the phone for a few hours (in case the battery was dead) and still it will not power on.  I don't even see the "M" logo screen when i try to power on.
    Anybody have any ideas?

    That's very upsetting when the device will not power on. It maybe hardware related so we may need to look at your replacement options. Is there any corrosion where the battery and device connect? Please try the alternative hard reset This will factory reset the device. Please make sure contacts are backed up prior to resetting. If you are still experiencing this issue please PM me and I will gladly further troubleshoot with you.
    Thank you

  • My iphone 4 shut off and will not turn back on

    My iphone randomly shut off will not turn back on. it isn't dead, but I even plugged it in for over an hour still nothing. I already tried the home   lock button and that doesn't work either

    Hi there,
    You may want to take a look at some of the troubleshooting steps found in the article below.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 15 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Griff W.

  • Fully charged iPhone 4 shut off and will not turn back on?

    I am submitting this question for my boyfriend's iphone 4. He charged his phone lastnight, and it was fully charged and then it randomoly shut off without any warning. He says it will not turn back on.

    Have you tried to reset the iPhone by pressing and holding the sleep/wake button and the home button for 10-15 seconds until the Apple logo appears, ignore the red slider.  Then turn back on. You won't lose any data doing the reset.

  • My iphone randomly shut off and will not turn back on

    My iphone randomly turned off and now will not turn back on. I tried plugging it into the charger, but nothing happened

    do a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait fro the phone to boot back up.

  • My iPhone 4 shut off and will not come back on. How do I fix it?

    My iPhone 4 has not had any problems before and all the sudden froze then the scream slowly started fading away into black. Amd now will not turn back on at all.

    See Here for  >  Frozen or unresponsive iPhone
    Try this First...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    More Info here  >  https://discussions.apple.com/message/19521062

  • My lock button on top of my iphone 4 is completely stuck down. Also, my iphone completely shut off and will not turn back on and is nonresponsive to a charger. Is there a way I can revive it? Is there a way I can get my pictures and videos off of it?

    Please help me!!! The lock button on top of my Iphone 4 is pushed down completely and is stuck! And then yesterday I looked down and my iphone was completely black. It would not turn on seeing as how I could not push the top button to reset it to turn back on and then also it would not respond to a charge. I was wondering if anyone could suggest anything at all in how to turn it back on and bring it back to life and if there was any way I could save my photos and such off there! Thank you!!

    SIDE NOTE!!!!!!!!!
    This phone does NOT have water damage and was working just fine until i had this problem

  • X220 Sudden shut down and will not turn back on

    I have a Thinkpad X220 Tablet. It has worked fine the last 1.5 years. It recently shut down suddenly, no shutting down screen or warning, just straight to black. The battery was full and it was plugged in. It will not turn on and when plugged in with the AC adapter no lights come on. I have no idea how to go about fixing this or what could be causing this. Any advice would be greatly appreciated. 

    Hi Zevain,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear that your Lenovo ThinkPad X220T is not powering on.
    I would suggest you to perform Flee Power – remove the battery and any other peripheral device connected to the computer. Hold the power button for 10-15 seconds and then connect only the AC Adapter and try to turn ON the computer.
    Swap the battery and AC adapter with a good known one if you can to check if it’s a battery/adapter failure. Take out the memory, start the system and check if you hear beep sounds.
    Please let me know the happenings!
    Best regards,
    Mithun.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

Maybe you are looking for

  • Infoset on 2 cubes in BI 7

    Hi, Can i create an infoset on two infocubes in BI 7, how does it affect on performance. I need to create an Infoset on purchasing and Inventory cubes. Cheers, Sheshu

  • Final Cut Pro to work on two computers simultaneously?

    I have two iMac computers running the same version and serial number of Final Cut Pro. But, only one computer can work with Final Cut at a time. I have to log out from FCP to be able to open FCP on the second computer. This limits our ability to work

  • ICM_HTTP_CONNECTION_FAILED Fehlercode: 400

    Hi , I get the error  ICM_HTTP_CONNECTION_FAILED Fehlercode: 400 when I try to send the XML contents.could somebody tell me what could be wrong?I have set up the HTTP connection and it seems to be ok. Please provide your comments. <?xml version="1.0"

  • PhotomergeUI.plugin is not working in CS6 for Mac

    I am using Photosho CS6 on a Mac. I urgently need the PhotomergeUI.plugin to be working. It was working in Photoshop CS5 after conversion to a 32-bit version. CS6 for Mac is only provided as a 64-bit version. Is there any way to make the plugin work

  • Material Master Characteristics Assignment

    Hello, I would like to maintain characteristics for selected materials; the idea is to provide a dialogue in which the characteristics an be maintained and saved. For this I defined a sub-screen in which I called the screen for the character maintena