Iphone 4 SIM Card-what can be done with it?

Last night I began taking up my 13 year old son's Iphone 4 before bed so that he will not be up on the phone all night. I discovered he removed the SIM card when he handed it over. I asked him why he did this and he did not give an answer. My first conclusion was that he wanted to place the SIM card into his Iphone 3G, but I've read that it does not fit. My other guess is that he may receive text messages or app alerts all through the night and wanted to keep it from me. Does anyone else have any ideas as to he could gain or be hiding by doing this?

xdp wrote:
My first conclusion was that he wanted to place the SIM card into his Iphone 3G, but I've read that it does not fit. My other guess is that he may receive text messages or app alerts all through the night and wanted to keep it from me. Does anyone else have any ideas as to he could gain or be hiding by doing this?
The only reasons I can think of that the child removed the SIM are 1) he didn't realize that the SIM in an iPhone 4 doesn't by default fit in an iPhone; 2) he has an adapter so that he can use the micro-SIM in an iPhone 3; such adapters are readily available, or 3) he doesn't want you to be able to use the iPhone and perhaps get his text messages.
I'd demand the SIM from him as well as both iPhones if it were me, though of course that's your call.
Regards.

Similar Messages

I restored my iphone 4s and now doesn't recognise the sim card what can i do?

i restored my iphone 4s and now doesn't recognise the sim card what can i do?

Was your iPhone hacked/jailbroken to be unlocked?
If so, installing an iOS update on an iPhone that was hacked to be unlocked or restoring such an iPhone with iTunes re-locks the iPhone to the carrier the iPhone was sold as carrier locked with.
What is the exact error message - the SIM card is not supported?

Just got a used iphone 3gs and it won't see my sim card what can I do?

Just got a used iphone 3gs and it won't see my sim card what can I do

Seems your story has changed... not seeing is not the same as not supported.
If the phone is carrier locked, you need a SIM from the carrier it's locked to to activate it. The sim does not have to be active, it just has to be one from that carrier.

See what can be done with Java

Want to see what can be done with a Java and specifically a Java3D application. Go to the Java3D forum and download the application "Free Java3D Demo Application".
This should put to rest the questions if Java is good enough to do serious programming. This is a Demo of a full application that has over 100,000 circulation within the last month.

I appreciate the response to this posting however please do not email questions to me reguarding how it works or can I help you to do your java homework. <8-)
I received 60 email since this posting with many questions. The software is a commercial application. If you are interested, I suggest you go to www.3demall.com/fast and join the program in order to receive a CD and support. The Fast Start Program is a way to introduce our complete concept of PayWare while providing a good value.

"app.selection[0]" – what can be done with it? (CS5)/(CS6)(JS)

This is hopefully not a simple question – because then the answer would probably be 'no'/'nothing else'.
What can be done with a selection? Is it posible to sort out the different contents within a selection, declare variables around them or give them names, and then continue from there?
I have one specific idea here. I want to select two things – one is a group, and the other is a non-grouped object, and then include that object in the original group. No – not the same as selecting them and simply grouping them, that could be done by hand. I want to include an object in a previously set group without creating another one.
It has to do with a plugin used for creating apps for mobile devices. Creating another group out of the group + item makes all previous settings assigned to the original group dissapear. Not sure if the plugin will accept this method, but it's worth a try.

Hm. This now is pure speculation on my side, 'cause you are not telling much about the plugIn that has to do with app creation.
From my knowledge of Adobe Digital Publishing Suite, and I cannot assume that you are using the DPS plugIns "Folio Builder" and "Overlay Creator", I can only guess, that you applied something like an effect (in terms of DPS an "overlay" function) to a group and afterwards grouping anew with a different object to a new group. Then the overlay is burried in that group and will not work as you expected.
I never asked myself if it will damage an applied "overlay", if the object is grouped with something that has an different "overlay" effect or no "overlay" effect at all. But I will test for that situation…
After re-reading your question you like to add the same "overlay" effect of the original group to the new group or adding a new object to the group so the effect is not lost.
In case you are working with DPS, the overlay effects are "injected" with a method you can compare directly with the JavaScript method insertLabel("KeyString","ValueString") and will stick to the object until the values are changed or the object (your group) will not exist any more (by un-grouping).
So please, tell us something more about your workflow…
It's not that easy to add an existing object to a group without un-grouping and re-grouping. And this will destroy the "injected" Key/Value-pairs of the effect.
Here is something to think about (read the whole discussion):
http://forums.adobe.com/message/2259499#2259499
Uwe

What can be don with theese 10000Mips? Please Post back

I want to by an X-Fi Soundcard.
Is it possible, foraexample, to set up a few parametric equalizers for each audio channel?
If yes, how many?
The X-Fi site tells about the instruction set and the architecture of the chip. Is it possible to write own "Soundshaders"? I mean own effets, which can be processed in Hardware and can be aplied to all 2D and 3D voices.
Nvidia has this FX-Studio to develop FragmentShaders for their Graphiccards.
I simply can't believe that the "entertainment mode" uses up all resources of this chip. A 0band Equalizer is for me something to laugh at, you know.
I want to compensate all the parasitic effects in my room.
I want to correct the resonaces, the frequency plot of my speakers(down to 25Hz if possible), of course the resonances of my speakers.
If you tell me, that it can't be done in gaming mode, because of performance lacks. That wouldn't be a problem, as i only intend to listen to music.
Can anyone tell me what can be done and what can't.
I simply want to know, what this soundcard can do for me, before i intend to spend a few hundred bucks on it.
I hope anyone replys!
Thanks in advance
MadMartin

MadMartin wrote:
I want to by an X-Fi Soundcard.
Is it possible, foraexample, to set up a few parametric equalizers for each audio channel?
If yes, how many?
The X-Fi site tells about the instruction set and the architecture of the chip. Is it possible to write own "Soundshaders"? I mean own effets, which can be processed in Hardware and can be aplied to all 2D and 3D voices.
Nvidia has this FX-Studio to develop FragmentShaders for their Graphiccards.
I simply can't believe that the "entertainment mode" uses up all resources of this chip. A 0band Equalizer is for me something to laugh at, you know.
I want to compensate all the parasitic effects in my room.
I want to correct the resonaces, the frequency plot of my speakers(down to 25Hz if possible), of course the resonances of my speakers.
If you tell me, that it can't be done in gaming mode, because of performance lacks. That wouldn't be a problem, as i only intend to listen to music.
Can anyone tell me what can be done and what can't.
I simply want to know, what this soundcard can do for me, before i intend to spend a few hundred bucks on it.
I hope anyone replys!
Thanks in advance
MadMartin
8 simultaenous realtime effects.
X-Fi Raw Data Path MIPs
SRC..........730
Filter.......200
Mixer........20
Tank.........440
DSP..........80
Total........0340
Ref.
jutapaMessage Edited by jutapa on 02-24-20062:20 PM

My iPhone 4s wont recognise my sim card what can I do?

my iphone 4s wont recongise my sim card, and I cant use my phone

Remove and reinsert SIM.
Replace SIM.

About what can be done with free tools today

Hi,
I'm quite new to MHP and JavaTV. I've seen many web pages that informed me about MHP (like Steve's one, thanks if you see this message), but I'm still a bit confused about what can and cannot be done with the free tools available today, eg XleTView, openMHP or others.
I'd like to fetch a DVB stream (or an object carousel? I'm not sure about it) from a DVB-T card (which has BDA drivers) and access it with MHP (in order to find which services are available, etc...).
Tell me if I'm wrong, I think XleTView or openMHP can't access my DVB-T card, it's just useful to test Xlets.
Is there a way to have it access the DVB-T card, or even a stream or an object carousel that would be on my hard drive?
Many thanks, and sorry for the silly questions.

[oops]
when I say "it's just useful to test Xlets", I don't want to say it does only minor things. I understand all the MHP stuff is complex to implement, so don't take it bad, I just expressed myself the wrong way :)
I'm grateful to the programmers who help to do this. Thanks!
[oops]

What can be done with the fingerprint reader?

I am trying to figure out simply what I can do with the fingerprint reader on the T400. I understand how to use it to log into the computer. My main question is whether or not I can use the fingerprint reader in the following contexts, and if so how.
1a) To log into internet password protected websites. When I use IE, the password manager pops up and prompts me to save a password. If I save it, I can return to that website and it automatically will enter the login information and password for me. I want to know whether you can have password manager (or another program) prompt the user for the fingerprint and then submit the login information. That way the information is protected each time I log in, but I do not need to enter log in information each time, only a fingerprint.
1b) If this is possible in IE8, I would like to know if it is possible in Firefox 3, in which password manager does not pop up.
2) Can it be used to log into MS Outlook.
3) Can it be used to lock documents in MS Word.
I much appreciate any information letting me know if these can be done, and if so, how to do them. Thank you very much for your help!
J
Message Edited by lenova on 09-07-2008 09:13 PM

After playing with it for a while I figured out at least questions 1a) and 1b). For anyone else who has the same questions:
1a) Have your browser save the password using Lenovo's Password Manager. Then open password manager and open that item. Click the advanced tab and change the security level to custom. Click "Customize Security Policy" and select "Protect with a Fingerprint."
1b) Lenovo has a patch to synch Password Manager with firefox 3. It can be found here and is much easier than the manual fixes found on this forum.
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70132
I am still looking for help with 3) and 4), particurally 3). Please let me know if you have any ideas. Thank you very much!!

What can be done with my connection?

Morning helpers,
My BB line isn't very good. We live at the end of long line and the connection has never been stable long enough to to get the stats off the box with any meaning.
I know my line is actually connected to a cab that has a new fibre enable cab next to it which would halve the distance to the exchange but there doesn't seem to be an option available to force the move. A local neighbour, down the lane, has already been moved onto the Infinity cab and is getting a solid 9mb through PLUSNET but when my next door neighbour called (same little development of houses) he was told his line was not connected to that cab but directly to the exchange, (I KNOW this to be incorrect, a BT eng has been out to fault our line in the past and confirmed we were on the cab.
The BT Speedtest usually fails due to latency, I can usually get others to run, last night I managed 244k down and 288k up. Up is usually better all the time.
Phone line is quiet to the extent that voice calls are clear but quiet.
The connection time is low due to it usually not being up, I have a HH3 and my faceplate is one of the Openreach ones that doesn't need an extra filter. BT eng has confirmed that home wiring is ok.
Any thoughts of how I should proceed.
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days,00:33:02
Downstream:
288 Kbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
7.1 dB / 10.0 dB
Line attenuation (Down/Up):
76.2 dB / 31.5 dB
Output power (Down/Up):
13.2 dBm / 12.5 dBm
FEC Events (Down/Up):
520 / 0
CRC Events (Down/Up):
5 / 0
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
3 / 0
Error Seconds (Local/Remote):
5 / 0

Well there seems to be some available upgrade options to you. For one your exchange is ADSL2+ enabled, but I would advise going onto this on your line as it would probably make the line even more unstable. I would contact the mods, you can do that by following this link: http://bt.custhelp.com/app/contact_email/c/4951 and go through the available options with you in terms of your upgrade, they can even check with Openreach if you can get Infinity, but I would imagine not so as you seem to be very far from the cabinet. Problem with Infinity is the speed degrades 4x quicker per every km than ADSL does.
As for the steps, that are always advised to people on long lines, its really a case of doing everything your side to ensure you can get the best speed before an engineer.
1) Get a filtered faceplate (preferably ADSL Nation), this terminates extension wiring from interferring with your broadband, has better quality filters, data loss is minimal compared to a microfilter. http://www.adslnation.com/phpapps/catalog/product_info.php?products_id=105
2) Would be to get a shielded RJ11 cable, which has an outer metal coil for hardyness and sturdyness, and twisted pairs inside to reflect back interference. Also the conductors at either end are 24k gold plated to ensure maximum trasmission of speed. http://www.eshopbrokers.co.uk/products/Cables/Network-Cables-Other/Belkin/Belkin-High-Speed-Internet...
3) The most prominent, get a business hub, these alone can account for an increase in up to 800kbps of extra speed, which would leave you with a decent connection compared to what you have now. The business hub's have a special chipset in which seems to be good at handline high speeds through a lot of noise on the line, and also giving stabibility, they have a good backup for Inpulse Noise Protection. You can get them off E-bay for around £10.
Regards Edd
Check your Line
BT Speedtester

My phone says no sim card, what can I do?

I was texting with someone, then my phone did some weird thing, and I shut it down to correct it. When I turned it back on it said there was no sim card. I havent touched anything. How do I fix this?

Try removing the SIM and putting back.

Cp6 - Have I reached the 'limits' of what can be done with Captivate?

Earlier, I wrote about a crashing problem with Captivate: http://forums.adobe.com/thread/1140677
But it seems that the extra slides I have added have brought Captivate down to being so slow, it is unusable.
To get to the bottom of what is causing the problem; I started by hiding about 1/2 the slides and then publish, everything work... the course is responsive. Then I unhide a few more, publish again, and repeat. What I am noticing is that the responsiveness gradually becomes slower and slower.
At 22 slides, the course is already beginning to show some sluggishness; at 40 slides, the course is impossible to run (see my above listed thread).
What the heck is going on? This is unacceptable!
Have I done something wrong along the way? Is anyone else out there using Captivate to build full self-paced training?
I still need to insert another 15 slides before this course is complete but seem to have hit a roadblock!
I have also tested externalizing much of the content but that had zero affect!
Any advice?
BTW:
- Total size of project folder (components are externalized): about 5MB
- The course is self-paced, meaning that I use custom FORWARD/BACK button for navigation. I am not using a skin with a playbar.
- I have very few animations/aka Effects
Thank you,
Shawn

Thank you for your reply Andy.
(BTW- if you notice any weirdness in my reply - I am on my iPhone and mobile Safari isn't entirely compatible with this forum)
I agree, it isn't the number of slides that is the problem but perhaps it is the type of slide. I have 10 min video simulations of well over 100 slides that function perfectly.
However, this is my first time building an entire course in Captivate and I have noticed a trend in the course slowing down which each addition to the content.
Because this is self-paced with custom nav buttons (no playbar), each slide button controls pause at 2 sec (unless there is an Effect on the slide and more time is required). Typically, each of the 30-40 slides is between 2-4 seconds.
The learners can only jump to a specific slide via the TOC.
IMPORTANT NOTE: when I posted this message, there was a 6 second delay from clicking a nav button and the next slide appearing. However, since deleting 9 Smart Shapes (that acted as a topic menus that allowed the learner to jump to specific topics) - I have since replaced these Smart Shapes with simple bullets and all Jump To's removed. As a result, the unacceptable 6 second delay is reduced to about 2.5 seconds. Still not good but a significant improvement.
I have no audio but I do have inserted SWF software simulations. It is important to point out that removal of the sims had no affect on the responsiveness.
The poor responsiveness spans all tested systems both from with Captivate and as a published SWF (with and without externalizing resources).
Hosted on AICC LMS but in this situation, not relevant. :)
Thanks for your advice.

I need to understand better, what can be done with sync and what cannot

i setup 2 windows boxes + 2 linux boxes to sync and got a mess in less than a day. apparently, i do not understand, what it does/should do, and what not.
As one having done work in distributed environments, namely in database replication scenarios, i understand, there have to be limitations, especially, as all of my 4 boxes are running most of the time.
next, i found, that copying profiles wouldnt have worked either, as the windows boxes (have to) use different add-ons/plugins compared to linux (like fireshot - to give a simple example - needed a replacement on linux). - So just moving profiles doesnt help. But the promise to catch open windows/tabs, history, and so forth doesnt seem to work either. Maybe TabMixPlus is killing the whole mechanism?
I found very detailed documentation on where to click to get it all started, but nothing about the internals nor limitations, thus being very disappointed now to find sync actually NOT working at all.
Furthermore, while setting up the whole thing, every machine had a "sync setting" as to how to use that one machine: initial distribution/sync/receiver only/and so forth. Does this only concern the initial setup? - I wasnt able to see this configuration option ever again to be able to change it after the initial setup had been done.
So i obviously need to understand better... as to me it looks like some real messy replication scenario, with not all backends sharing the same tables. And apparently adding/removing add-ons needs to get replicated manually anyway.
What time delay do i have to expect? When shall i use "Syncronize" manually? And so on...
I mean: I trusted Mozilla solution more than any other one, but it doesnt seem to live up to my expectations.
(sorry: i had to reenter the whole thing after my email address ran out)

Ok then! Thanks for answering! Can you still transfer music over? I can't even get that to work! I have set my nephews up with no problem..obviously not a sec generation... please help again!

What can be done with the PCI express expansion slot

Hello Mac world. This is Cee again with another wild question about the Macbook pro. I recently purchased a 17in Macbook pro with the discrete 1gb AMD radeon graphics card and I have a question. Is it possible to enhance this discrete graphics card using the express expansion port? I ask because I’m an intense console gammer and I would like to take this experience on the go with my Macbook pro. I know this Macbook can handle games such as Call of Duty Modern Warfare 3 if set to low settings, but is there a way to expand the graphics card using the express expansion port? I know there are other laptops designed specifically for the purpose of intense gaming, but I just wanted to try it out on the Macbook pro.
Thanks for any help.

CEE6 wrote:
Is it possible to enhance this discrete graphics card using the express expansion port?
Nope, sorry.
I ask because I’m an intense console gammer and I would like to take this experience on the go with my Macbook pro.
The MBP has powerful graphics, but for a limited time as games get more powerful
For computer gaiming you need a Windows 7 tower where the video card upgrade options are massive.
laptops of all kinds can't do this, neither can most Mac's, the Mac Pro has little or no graphic card upgrade options.
http://www.cbscores.com/index.php?sort=ogl&order=desc

IPad, iPhones, iPods, activboards-what can I do with all these in my classroom?

I am a language arts teacher in an 8th grade classroom. I have a classroom ipad, an HP laptop/dock, promethean activboard & more than half of my students have their own iPads/iPods/iPhones. I personally have an iPhone & a MacBook Pro (& an Apple TV, but would not want to bring that from home to school-if it meant the diff between being able to take technology to the next level, i might consider buying an Apple TV for my classroom).
Is there a way to have the students using their devices to respond to questions/games on the board? And can I use the ipad to control the board?
The little I researched so far seemed to reference using Apple TV hooked up to board with devices passing thru it as "remotes"? Is this something?
Thoughts, feedback?
TIA !!!

Lightroom/PV2012 does an awesome job on jpegs too. It doesn't have all the same data to work with as raws, so can't real the highlights in as well etc. but can buff 'em up pretty good... - try it!
I could give a more complete and detailed list of differences (e.g. camera profile & white balance), but you'll be discovering them shortly anyway .
In general: there are a few less options and you can't push 'em as hard - edits may need to be more "restrained" (conservatively applied).
~R.

Iphone 4 SIM Card-what can be done with it?

Similar Messages

Maybe you are looking for