Iphone 4 sms,lock sound,charge sound,alert sound not working KINDLY HELPP!
iphone 4 sms,lock sound,charge sound,alert sound not working KINDLY HELPP!
Why are you shouting?
All caps indicates shouting, is considered rude and is difficult to read.
There is no need to be rude to those trying to help.
Good luck
Similar Messages
-
Just yesterday my IPhone 5 stopped charging. It won't charge on any of my docks, nor from the computer or from the charger that comes with the phone. Anyone have this problem and know what to do to fix it. I don't want to upgrade to the IPhone 6, I like my Iphone 5.
Hey Fran0417,
I understand your iPhone is not charging no matter what you connect it to. You have tried different charging sources. To further isolate, have you tried more than one cable?
Going further, please check out this article
If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
If the battery doesn’t charge
If the battery doesn’t charge, unplug your device and try these steps:
Look at the connector at the bottom of your device and make sure it’s free of debris.
If you're using a USB power adapter, make sure it's plugged in all the way and the power outlet is working. If you're connecting to a computer, make sure it's on and can charge your device. To charge an iPad, you might need to use a USB power adapter and plug into a power outlet.
Try a different USB cable, USB power adapter, or USB port.
If everything seems to be working, reconnect your device and wait for 30 minutes.
If your device still doesn’t charge, try to restart it while it's connected to power. If you can't restart, reset your device.
If that doesn't help, continue with the article to the end.
Regards,
Nubz -
My iphone 5 lock i put passcode ànd do not work
I had apasscode and i put my passcode and do not allow me to used my phone
See this support doc.
http://support.apple.com/kb/ht1212 -
I bought a new IPHONE from apple reseller and the earpiece is not working.
There is no sound .Speaker and headfone are working but earpiece is not working.
How can i get it replaced.You can get service information on this web page.
Regards. -
Since updating to 706 the sound on my ipad2 is not working right--on videos or music. There is distortion and some kind of interference at all times. Any ideas?
Has the unit EVER been jailbroke?
If "No," first try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this. -
I am using Mac book with windows 7. But my sound card and cam is not working when booted through windows. How can I solve this?
ThanksAssuming that you tried to install Win 7 in bootcamp.
Power on the machine and press and hold the "option" key when you hear the bong sound.
Select the Macintosh HD icon and press "return" or just click on the icon.
Once booted into OS X go to System Preferences and select the Startup Disk icon and configure startup to use the Macintosh HD. -
The sound in my IPad is not working after I downloaded the new iOS 7. I tried to reset the IPad to no avail. Could anyone be so kind to help me?
I"m going to make the presumption that you've checked the volume and that you don't have it muted. One thing some have suggested is to go into the settings and reset all settings.
It is kind of a drag because you wil have to retweak everything but it's helped for some. -
I upgraded my 3gs to ios5 and the sound of the messages is not working well, it's slow and my bluetooth definitions are not stable how can i get back to the ios4
App Store->Purchased
iTunes->Purchased->Download All -
Hi!
I remove by mistake the realtek audio device high definition audio bus. Now, the sound of my computer is not working. What should I do?first go to start-all programs- windows update is at the top of the list follow the prmpts to install microsoft update which is the new version of windows update if microsoft update is all ready installed go there and select custom then let it look for updates
then if it detects missing drivers it will install or guide you on what to do. If you have an r52 laptop then try this link.
http://support.lenovo.com/en_CA/downloads/detail.page?LegacyDocID=MIGR-58599 the best of luck.
2 if that doesnt work then try this open device manager right click on the sound device you may have to expand sound, video and game controlers on the tab that comes up select properties then select the drivers tab select update driver.
do it this way incase the driver installation failed the frist time it may not ask you to update again if you didnt uncheck the box that came up on frist try.
3.find a mother board disk and search the disk using explore for ac97 realtech driver. actually windows update should solve it also try there FIX IT web site there are many automatied fixes there for your use. -
Iphone 4 Alerts Tones Not Working / Ringer Is WORKING KINDLY REPLY ME
HI , PLEASE HELP ME I WANT TO FIX THIS ISSUE THAT I AM GETTING PLEASE HELP
MY ISSUE IS IPHONE 4 ALERTS TONES NOT WORKING AND CALL RINGER IS WORKING.. PLEASE HELP ME!If the iPhone came from the US then it is locked to AT&T. To unlock an iPhone the original carrier is the only one who can unlock the iPhone and AT&T will not unlock iPhones. So there is not official way to unlock the iPhone 4.
At this point there is no way to hack the iPhone 4 running 4.2.1 to unlock it either so the phone and messaging apps will never work. You basically have an iPod touch. -
When i put in it the sim card and then turn the iphone the home page of iphone does not come and message come told me invalid sim or iphone is lock but my sim card is not invalid and my iphone is work with all network in sweden
That usually means your phone is locked to a different phone carrier than the one you're trying to use.
YOu would need to conact the carrier the phone is locked to and see if they can unlock it for you. ONly the carrier that the phone is locked to is authorized to unlock it. -
How do I remove music from my iphone 5? Un-checking and syncing does not work.
How do I remove music from my iphone 5? Un-checking and syncing does not work.
Hello mail4bru,
I read your post, and it sounds as though you'd like to learn more about iTunes syncing. I have linked to an article that will instruct you on that:
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/ph12113
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
I got my Iphone 3gs unlocked, but Navigation and Compass are not working. Please help if anybody had faced this problem and got it resolved.
Only the carrier that the iPhone was locked to can unlock. There you go, hacking void any support from this forum.
-
I was updating google translate on my phone then the screen just black out. I thought battery went flat but after I put on charge, it's still not working. Please help!
Hello 74birdy
The article below will assist with troubleshooting your iPhone not responding.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Ical alerts are not working on Lion
I've got a problem with the new ical on Lion: alerts are not working. Any clues?
(The "turn off all alerts" is unchecked )Same problem, alerts are not being triggered. I am getting fast and perfect syncronizing between iCal, MobileMe Cal, and iPhone. But alerts are not happening consistantly.
Unreliable notification is a big problem.
I looked in my user preferences as noted by "xbarn" but there's no iCal login item. Can't imagine that iCal would need to be running for events to activate, since they are syncing correctly without iCal open.
Maybe you are looking for
-
EXCEPTION_ACCESS_VIOLATION Library: awt.dll
Hi to all! I've been searching in all the forums to try to find a fix or at least an explanation of an exception that I get, but until now I have not seen any answer, so... here it goes my problem: An unexpected exception has been detected in native
-
My camera can be set to record as motion JPEG or light AVCHD. It was set for AVCHD. Could that be affecting it? If so, can you think of any way I can load these. I am trying to add them to an IMovie I started from a different source.
-
Canon Lide 80 - not working after 10.5.8 update
Hi, Wondered if anyone has a workaround for getting a Canon Lide 80 scanner to scan using Photoshop Elements 6, it worked in OS X v10.5.7 previously as I copied the latest ScanGear CS 7.2X plugin into the Photoshop Elements plug-in folder then ran El
-
Burn new DVD or copy existing DVD?
For reasons too stupid, ignorant and boring to go into, I have so far been deleting the imovieproject files after I have burned to DVD, retaining the DVDproject files. I need to clear the 50 odd GB these take up. In case I need to make a copy of a DV
-
Problem with external procedure
Please, i'm doing some experiments in Microsoft Win2003 environment calling a c function as external procedures. I've build a sample using Dev-C++ that make a DLL (i don't know c language) named sysDLL.dll DllClass::DllClass(char *cmd) int num; num =