Iphone 4.Soundproblems. I have sound only in one canel, its dosents matter if it is earpluggs or iphonedock

Soundproblems. I have sound only in one canel, its dosents matter if it is earpluggs or iphonedock. And the sound is very low

Go to Settings-General-Accessibility , make sure the sound is balanced between left and right

Similar Messages

  • Why do I have sound only in one headphone, stereo and docking station?

    Why do I have sound only coming out of one side of headphone, car, stereo and docking station when playing itunes?

    Try cleaning out the headphone jack with a cotton swab.

  • I am using duel thunderbolt displays with a MacBook Pro. I only have the option to have sound come from one or the other. Has anyone thought of making the left channel come from both speakers on the left Monitor and the same of the right? If yes, how is t

    I am using duel thunderbolt displays with a MacBook Pro. I only have the option to have sound come from one or the other. Has anyone thought of making the left channel come from both speakers on the left Monitor and the same of the right? If yes, how is that done? The MacBook Pro could even be a center channel if configured in that order.

    See the following thread on the same topic:
    2 Thunderbolt displays   MBP = sound coming from both displays?

  • Why My iPhone 4 doesn't have sound after I upgrade it to IOS 7.0.2

    Why My iPhone 4 doesn't have sound after I upgrade it to IOS 7.0.2?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
     Cheers, Tom

  • HT1766 Have sound only with headphones after apples new IOS install, any help would be appreciated.

    Have sound only with headphones after apple latest iOS install, any help out there?   

    http://support.apple.com/kb/TS2802

  • Why the iphone 4 does not have sound when I watching the recorded video?

    why the iphone 4 does not have sound when I watching the recorded video?

    Have you turned up the volume?
    Try the buttons, or the bottom audio slider.
    Does your phone normally play audio?
    And have you tried to record and audio note to check if your microphone is not faulty.

  • Brand new Ipod touch G4 with sound only in one earbud

    I have a brand new Ipod touch G4 with sound only in one earbud.  I have tried different types of headphones, but get the same result.  If I jiggle the connector pin, I can get sound on both earbuds, but only on one side when the connector pin is push all the way in.
    I have an older Ipod g4 without this problem
    any suggestions?

    Try on your ipod going to Settings-General-Accessibility. Scroll down into Hearing and see that Mono Audio is off. Maybe that's the problem.

  • HT201257 I just bought an imac in september 2012.  And i just find out that my microphone is not working.  So i did an apple hardware test and with no problems found?  I have sound but no one can hear me, not even the computer.  Should i bring it back to

    I just bought an imac in september 2012.  And i just find out that my microphone is not working.  So i did an apple hardware test and with no problems found?  I have sound but no one can hear me, not even the computer.  Should i bring it back to the store

    Before you go through that trouble open About this Mac > More Info... > System Report > Audio and see if the system actually knows it has a microphone.  Then you can look into Applications > Utilities >  Audio MIDI Setup and see if the microphone is there, select it and make sure the sliders are set to full. Then in System Preferences look for Sound > Input and make sure it shows up there and the sliders are at least half way up. If none of that works do a
    SMC RESET
    http://support.apple.com/kb/HT3964
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    It is the 5 second timing that initiates the reset.
    then go through the process of looking for the microphone again as the reset may reenable the mic.

  • Sound only in One speaker

    Got a new computer with VIA KT333 KT3 Ultra series and loaded on Windows 2000 professional.  Everything works fine except can only get sound out of one speaker.  Tried re-installing the audio driver.  Tried all speaker configurations in control panel under multimedial.  Tried three different sets of speakers.  No warning in the system devices in control panel.  Thinking the MB may be bad.

    Hi,
    A couple of generic things you could try, but might not apply to your specific mobo.
    First, make sure that the plug is fully plugged in to the socket. Those 3.5mm plugs don't leave a lot of room for error, and sometimes a combination of the plastic on the plug and the metalwork surrounding the socket will prevent the plug from going in all the way. This is more likely to affect the right channel. (I assume that in trying 3 sets of speakers, there wasn't a common faulty lead involved).
    The second thing to look at depends on your computer setup. Many (but not all) MSI mobos have a 10 pin header called (for example) Front Panel Audio Connector: JAUD1. This lets you connect to an Audio Out socket on the front panel, as an alternative to the rear panel outlet. The audio outputs connect first to the the front panel (green) socket, with a return circuit for each channel which is automatically disconnected when you put a plug into that socket. So the audio out signals travel in lovely unshielded cable from the mobo to the front panel and back, before going to the back panel. If you don't have a front panel socket (and cable to suit), then you have to put a couple of jumpers across (for example) pins 5 & 6, and 9 & 10. If one of these jumpers is missing, you will only get one channel out. You could also lose a channel if there is a fault in the cable taking the signal from the mobo to the front panel, or the return cable, or in the switch contacts of the front panel socket (or in the rear panel socket contacts, for that matter).
    So, if you have a front panel audio out - try that and see if you get both channels. Also, check the wiring from JAUD1 to the front panel. You could also try removing the cable from JAUD1 and installing a couple of jumpers instead (check the mobo manual). If you don't have a front panel audio out, check that the 2 jumpers are on JAUD1. You could even try cross connecting the JAUD1 pins (5 to 10 and 9 to 6) and seeing if the missing channel changes or not.
    Also, try a few different audio sources (CD playback, playing .WAV or MIDI files, using Line Input - and check the advanced options in the Audio Mixer controls to make sure the Balance controls are centred.
    I hope this helps.
    Cheers

  • IPhone Calendar Events ALWAYS have sound even when event on the Mac does not.  How do I turn sound OFF on these events?

    I make a new event, I set the Alert = Message (NOT "message with sound").  When event happens on the iMac there is no sound.  Same event, syched to the iPhone, has sound.
    I have deleted events, recreated, synched.  Absolutly certain Alert is "message only."  No change in behavior.
    I have checked all preferences. iCal is set to automatically add an alert but I make sure I add the alert myself without sound.
    I just found the iPhone settings/sounds/calendar.alerts and I set this to "vibrate only."  I assume this will shut off the sound on ALL calendar alerts.  That's not really what I want to do (I want sound on some events, just not on every event) but if that's the only option available I'll take it.
    Can I get the iPhone to do what I tell it to do instead of overriding my settings?

    If it is not in Airplane mode then look here:
    http://support.apple.com/kb/TS1692

  • I connected my BookPro to my HDTV but I have sound only on my computer

    I connected my BookPro to my HDTV using an HDMI cable, I have video but I do not have audio. What could I do to transfer the audio from my computer to my tv?

    Hello signoradig,
    The first place I would check is in System Preferences > Sounds and check the output for your MacBook Pro and select it to your TV.
    OS X Mavericks: Use a television as a display
    http://support.apple.com/kb/PH13801
    Regards,
    -Norm G.

  • My iPhone 4 doesn't have sound except ringer and unless I plugged in earpiece!

    I'm an apple user at first.. Then switched to android and recently my android screen cracked thus I'm using back my iPhone 4 temporary and realise the sound wasn't working properly except for ringtone and unless I plugged earpiece in if not message, whatsapp and lock and keyboard totally no sound.. Is it a software problem? Pls help..

    Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose any data buy resetting, but it can cure some glitches. Are you still connected via Bluetooth to your car system?
    If this does not work, and to rule out a software issue, set it back to factory settings, without using any backup data afterwards. Set up the rest of the personal settings manually and test the sound functions. If the mute button still does not work, this is a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider:
    Use iTunes to restore your iOS device to factory settings - Apple Support
    Find an Apple Authorized Service Provider
    iPhone - Contact Support - Apple Support

  • The phone app on my iPhone 5 doesn't have sound

    PLEASE HELP!!!

    Try this support document http://support.apple.com/kb/TS1630, or the user troubleshooting steps are restart, reset, restore from backup and restore as new. Try each step until it is corrected. Also, check the speaker volume, and that can only be done when in a call. Can you hear the phone ring?

  • How do I delete multiple copies of songs on my iPhone when my laptop's iTunes only has one copy of each?

    Hi, everyone.
    I've seen many versions of this question, but mine has some key differences.
    The problem is that my iPhone 4S has multiple copies of almost every song that I've selected to copy from iTunes. The easy answer is to delete all the music from the phone and then re-sync from the iTunes library, except that I don't sync, I manually manage, because I have a 9000 song iTunes library. According to iTunes on my laptop, I have 835 songs on my phone, but there are actually over 2000 on the phone due to the duplicates. The fact that the duplicates do not show up in the iTunes library means I also cannot use the "Show Duplicate Items" tool.
    I'm thinking that the only two solutions are:
    1. Manually slide and delete all 1200+ dupes on the phone
    2. Delete all music from the phone and then go back through the library and cherry pick what I want on the phone. This seems okay, but I don't know why this happened, so I'm afraid it will happen again.
    I'd be thankful for any advice!

    The cause was probably a USB glitch during a sync or when copying. The music resides on the phone in separate files. A master file contains a database with an index to the music, an entry for each track and a "pointer" to the file containing the track. Somehow the index got corrupted with duplicate entries. It's likely that the music itself wasn't duplicated, but some tracks had more than one entry in the database. I've seen this happen when syncing (rather than manually managing) also. In my case deleting the track from the Music tab in iTunes, syncing, then adding it back fixed it.
    A related problem I've seen is an album may be split, with some tracks in each of 2 or more album entries in the listing. Fixed the same way.

  • Sound only works one one headphone =(

    Hello I just bought a brand new hp pavilion dv6 computer with windows 7.. And I cant get the headphones to work properly! I only get sound on one headphone! I tried to update the drivers and I've tried to change to another pair but nothing works! Please help  

    - Apple will only exchange yur iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    - A third-party place like the following is less expensive. Google for more places.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    - You can purchase and use a pair of Bluetooth headphones.

Maybe you are looking for