Iphone 4 stuck on a black screen not recognized by computer

So bassically my other Iphone 4 is now stuck in a powered on state between the bootloader (apple logo) and the powered off state. my computers(win xp through win 8.1) all say unrecognized USB device and i checked its not the cable using another iphone.... the iphone is completely unresponsive (nothing happens when it is plugged in the wall or computer, holding home and power does nothing, itunes won't recognize it, vibrations don't work either and if i try calling my iphone after around 3-5 seconds the other iphone i use to call my iphone just says call ended...) please try and help me! this happened after letting it charge from around 9% battery for around 3 hours and when i unplugged it, it was kind of hot to the touch, but that has been happening for a while now due to one of the pins on the charging port being pushed back onto the metal part and causing current to flow through the metal housing of the phone(the antenna i think?) but i never cared about it since i dont really need the antenna so much....
P.S. if i can get it to get into DFU mode it would be great since i made a program a while back for IOS 4.2.1 and IOS 5 to access the filesystem in DFU mode.... i really need my data but even recovery mode would be fine if i can get the phone working again! PLEASE HELP ME!

Your iPhone is in recovery mode and any data that was not backed up is already gone. You have no choice but to restore the phone and restore from your last backup.
~Lyssa

Similar Messages

  • IPhone stuck on a black screen

    My iPhone 4 is stuck on a completely black screen. Whenever I plug it up, it makes the sound to let you know your phone is charging. When I try to restore it through iTunes I cant because it says I have to turn off "Find My iPhone" in the settings. Which I can't because the screen is black. Also I cannot just restart it with the power and the home button because my power button is broke. Also, Ive been trying to let the battery just die but yeaterday it was on 100% the entire day and now its only on 76%. I tried putting it in the freezer but that didnt work. HELP HELP HELP HELP PLEASEEEEEEEE!!!!!!
    <Email Edited by Host>

    Hello Cassandra602,
    It sounds as if screen curtain has been enabled. This can be disabled by triple tapping with three fingers on your iPhone's screen.
    Turn the screen curtain on or off. Triple-tap with three fingers. When the screen curtain is on, the screen contents are active even though the display is turned off.
    iPhone User Guide - Use iPhone with VoiceOver
    http://help.apple.com/iphone/7/
    Cheers,
    Allen

  • IPod Nano 6th gen black screen / not recognized by Windows

    Like a year ago I bought an iPod 6th gen. A couple of months later the screen wouldn't turn on anymore.
    This is what I tried:
    - Manual reset by Home key + Down Volume key
    - Plugging it to different computers (with different versions of iTunes, 10 and 11). Windows only makes a sound when the device is attached, but it doesn't show it; iTunes is launched, though.
       - With iTunes 10 it waits for a while in "waiting for iPod". Then it says that an iPod has been detected but it couldn't recognize it.
       - With iTunes 11 (updated) it says that it can't contact the update server, which version is incompatible with this version of iTunes.
    I used to use the iPod as a watch, so there's no chance of me dropping the device, or hitting it agains something.
    It's really sad because I have no way of interacting with it to do a "recovery" or something.
    I followed suggestions in a lot of discussions, but nothing helped. I'm willing to try anything.
    I also have an Iphone, iPad and iPod touch, so I'm used to the most common troubleshooting.
    Please advice.
    Thanks!

    if it works properly with iTunes, then the screen might be disconnected from the logic board or (worse,) be broken. Contact Apple for Repair: Apple - Support - Service Answer Center
    <Edit>: did you change the screen before or after the problem arose?

  • IPod touch black screen, not recognized when plugged in

    I just brought myself an iPod touch 4th gen so I decided I would give my old one to my brother so I was clearing it off for him and some other things when I accidentally pulled it out of the computer I then pressed the sleep button to turn it on but the screen remained black so I tried plugging it back
    In the computer but it shows it as a unknown device then I tried plugging it into the wall charger which didn't work either. My friend thinks it might be in dfu mode but if it was wouldn't the computer still recognize it? Any suggestions? Please and thank you :)

    Google for a third-party repair place or sent it to Appe. See:
    Apple - Support - iPod - Service FAQ

  • IPhone 3G no longer charges?  Not recognized by computer? Win 7

    Last night my iPhone 3G stopped being recognized by my laptop. I can only charge it with the USB wall charger which ***** because now I can't restore or put music on my phone anymore.  This is. Second hand 3G but the same thing happened to my old iPhone.
    I am running firmware 4.2.1.  My iTunes is up to date and I'm on windows 7.
    Any ideas?  This problem is one of the main reasons why I bought another iPhone

    I'm afraid that the link is somewhat irrelevant to my problem.
    The problem is, that nothing happens whatsoever, when I connect my iphone to my computer. No charge, no nothing.
    I connected my fiances iphone to my computer and it charged, and itunes recognized it without any problem.
    However, I did try what the link suggested and nothing worked

  • (6G Nano) Stuck in infinite restore loop, not recognized by computer, music stuck at 0:00, and headphones not recognized.... Help?

    All of this randomly started happening.  I've remapped the drive, reinstalled iTunes, formatted the iPod, and countless restores.
    I've started it in diagnostic mode and everything checks.  The headphones work in my laptop as well as sounded the tones for the headphones check in diagnostic mode.
    I've spent about 3-4 hours total trying to do various things and I'm stumped.  Please help.  I cannot go to an Apple store because I am currently deployed.  I've had this iPod for less than 2 months and it would be great to get things working agian.
    Thank you.

    Nothing huh? No one's had this problem or this isn't fixable... oh well... if anybody comes up with anything I'll check in occasionally...

  • Ipod is not recognized and is stuck on apple black screen.

    So here's the story:
    I have a 30Gb ipod.A few days ago it ran out of battery.and now ive been trying to charge it on my computer but it gets stuck on the black screen with the apple in it and keeps making some weird "start up" sounds all the time.I've tried resetting, reinstalling iTunes and a lot of other guides that ive been searching throughout the internet.I've ran out of options so I'd like to know if anyone could help.
    Issues: 1-Ipod is stuck on black screen and doesnt charge
    2-Ipod is not recognized by either windows or Itunes
    3-When i try to put him and bring it back from disk mode it keeps the same.
    I think that's all.any questions anyone might have please post it here.Don't suggest to try and make him run out of batteries cuz it doesnt stay on for long.It stays on the black screen and then shuts off.any help/hint/suggestion that doesn't involve buying a new one is appreciated :/
    Thanks in advance.

    Try here:
    iOS: Not responding or does not turn on
    Next see if DFU mode will allow a restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode

    My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.

    Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
    Resolve specific iTunes update and restore errors

  • My iPod Nano (fourth generation) is stuck on a black screen and will not charge. It's done this before and you can still see a faint outline of the green charging sign and the time/date. HELP

    My iPod Nano (fourth generation) is stuck on a black screen and will not charge. It's done this before and you can still see a faint outline of the green charging sign and the time/date. HELP

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I jailbreaked my iPhone 5 and now i don't want the jailbreak any more so i restored the iPhone without iTunes an now i don't wad then it turned itf off and now its stuck on the black screen with the loading sign. So please how can i turn my phone on again

    I jailbreaked my iPhone 5 and now i don't want the jailbreak any more so i restored the iphone without iTunes and then it turned it self off and now its stuck on the black screen with the loading sign. So please how can i turn my iPhone on again?

    I figured it out by pressing the home button and the off button but when i turn my phone on again it's not restored. And when i try to restore it with iTunes it has to update but i can't update my phone because it's jailbreaked but if i can't update it, it won't restore the phone.

  • I have just reset my my iPhone 4s and it is stuck on the apple screen, not being recognised by iTunes and fully charged, any ideas how to get it to turn on properly?

    I have just reset my my iPhone 4s and it is stuck on the apple screen, not being recognised by iTunes and fully charged, any ideas how to get it to turn on properly?

    Hi Cjroyle,
    Thank you for using Apple Support Communities.
    From your post I understand that your iPhone will not boot past the Apple logo on the screen.  To troubleshoot this issue I'd like you to please follow the steps in the article below.
    iOS: Not responding or does not turn on
    Take care,
    Alex H.

  • Iphone 4 black screen not responding

    I was saving a picture on my iphone 4 and it was taking forever so I pressed cancel.  My iphone turned to a black screen and has been stuck on it for over two hours.  I have already tried holding down the home and on/off button together and the apple logo won't appear.  Can anyone help me out???  Thanks!

    I tried and the iphone didn't even pop up on itunes....

  • My iMac will not boot up. It's stuck in the black screen right after the apple logo. I ow

    I Own a brand new iMac 5k with retina display. It gets stuck in the black screen right after the apple logo And all of a sudden shuts down.

    You can return a new Mac within 14 days of purchase.
    A new Mac is in warranty for 1 year from the date of purchase.
    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273
    Call AppleCare or take it to the Apple store to have it checked out.
    Genius Bar reservation
    http://www.apple.com/retail/geniusbar/
       Reset PRAM.   http://support.apple.com/kb/PH18761
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the  appropriate method.
       Start up in Safe Mode.  http://support.apple.com/en-us/HT1564
    Best.

  • ITouch stucked at completly black screen (hard reset doesn't help)

    My iPod touch 4G is stucked at completly black screen, with no apple logo at all.
    This happened after restoring my iPod touch.
    Also hard resetting (holding home+power for 10 seconds doesn't work),  LCD isn't dead as I got it to go white when restoring.
    Now I can't even restore. I always get error 1600. But I can't reboot to solve it.   If I do so, it doesn't show apple logo, but just keep black screen.
    It's mega urgent.

    Error 1600, 1601, 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for error 1604.
    When prompted, click OK.
    Close and reopen iTunes while iPhone remains connected.
    iPhone should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Above from:
    http://support.apple.com/kb/TS3694

  • HT1430 I cannot switch my phone off as it is stuck on a black screen with a circle going round

    I cannot switch my phone off as it is stuck on a black screen with a circle going round as if it is going on to the next screen, I cannot seem to chnage it off this screen.  i also will not connect to itunes with an unknown error 0xE800065.  Any ideas???

    Start at # 3
    1-  iOS: Not responding or does not turn on
    2  Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    3 If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    4  Try on another computer                            
    5  If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

Maybe you are looking for

  • Mount an external hard drive in single user mode

    Do any know how to mount an external hard drive in single user mode: I've issue the following command: /sbin/mount -uw / mkdir /Volumes/ex1 /sbin/mount_hfs /dev/disk2s3 /Volumes/ex1 (I've checked my external hard drive using df -k showing the device

  • Acrobat 9 Pro Extended - Crashes

    In our application there is a case, where I have to make N number of copies of a PDF file but output should be a single PDF file. In order to achieve this I am using PDDoc.InsertPages. Code sample: For(loop) { objPDDoc.InsertPages(x, objPDDoc, x, x,

  • Video in itunes video folder but will not sync to iPad

    So I have a few vidoes in iTunes on my computer, I plug my iPad in, it syncs but only puts files from my iPad to the computer.  It will not go the other way.  It does not look like it put music i bought in itunes on my computer either.  Anyone know w

  • Bex Question -- Hierarchy related

    Hi , Can we create a hierarchy in navigational attribute of one of the characteristic and use that in report bex 7.0 ? if you have any documents related to this kinldy provide Thanks Maruthi

  • Establish materials' handling in Plant

    Hi, Scenario: My user have 4 new projects for plant XYZ.  Since they want to see the materials by project (materials will share the same warehouse) they requested to create new plant for each project! for easy monitoring. Is there any way in  to hand