IPhone 4 Stuck on Apple logo! And I cannot Access My Home Page
I restored my iphone from the settings and after when it restart it get stuck on the Apple logo. Please help me what can I do, even when I try to restore it with iTune it can't
Oh no that's not what I was asking. Nevermind I guess.
I don't think I can help you. Since your original post is a little old, try reposting it and see if someone else can help. Thanks.
Similar Messages
-
HT1414 PLEASE HELP, my iphone stuck on apple logo and i need my data
How to upgrade or restore my iphone 4 but to keep somehow my pictures and video, because my iphone stuck on apple logo. Already have 5.1.1 iOS on it. PLS what to do ???
Your data are already gone. If you don't have any backups either on a computer or in iCloud you are out of luck. The only option is to restore it from Recovery mode.
-
Iphone stuck on apple logo and loading bar.
Hey guys,
My itunes seemed to crash while i was restoring my phone and now its stuck with an apple logo and an empty loading bar, also my sleep/wake/lock button doesnt work so i cant enter recovery mode, please someone help or point me in the right direction!
AnthonyI will help you to solve your problem, don't worry just follow as I say.
1. Firstly it is not a big problem just do as I say.
2. Connect your device to the PC and then launch the iTunes software.
3. And then go for the option of 'Restore' in that iTunes.
But if your device doesn't respond to it.
4. Then try to update the iTunes software to latest version.
And using windows OS means you need to uninstall the whole previous version of software and need to download and install the latest version of it.
5. And if you are having the third party apps such as Antivirus and etc are installed then it will object your phone to respond to iTunes. So you need to update your iOS software at any cost, which is the only way to fix iPhone stuck on Apple logo.
All the best -
My iPhone 4S on iOS7 is stuck on Apple Logo, and it goes off, then back to Apple Logo again for hours. Pressing home button together with sleep button does not help. Plugging the phone to Mac and restart does not help either. What do I do?
Have not backed up for months, so prefer not to lose the data.
Thank you for your help in advance.Restore iPhone with iTunes on computer. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power buttons until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time of holding both buttons. Click the Update or Restore button that iTunes offers.
-
when i restored my iphone 5 it shows 4013 and 4005 error and my phone was stuck with apple logo and above some letters where also there in black and white colour . pls say me how to fix this plssss . my email = **********
<E-mail Edited by Host>Wrong Forum
-
HT4623 erase all content and settings iphone stuck on apple logo
erase all content and settings iphone stuck on apple logo
Don't worry, just follow these steps to fix iPhone stuck on Apple logo
=> First of all Start your Computer and then connect with Internet connection, now Download the latest version of the iTunes application
=> Now install the iTunes application in your System and connect your Device with computer via Data cable
=> Now connect your Device with iTunes application and then Tab on summary option, see in the left side bar of iTunes
=> Now Select restore option from iTunes and then confirm the Restore Message for better results. After this unplug your Device and Restart it
I hope that will surely
Thank you... -
Iphone 4 stucks at Apple logo and loading cycle. How to fix it?
Hi, i have an iphone 4 v4.3.3. After i installed some tweaks, it now got stuck at Apple logo and loading cycle. I try to get into safe mode, but it doesn't work. What should i do now? Do i have to restore it? If so, what version can i restore to? Help me please! Thanks in advance.
Hello i_rath
You would need to restore your iPhone by following the steps in the article below. You would need to put your iPhone into recovery mode and then use iTunes to restore it. The version of iOS that will be installed will depend on what version of iTunes you are running.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Regards,
-Norm G. -
iphone 4s is stuck on apple logo and the power button is broken.......Also, the phone has not been jail broken......HELP?
Greetings bruce0bruce,
It seems your device is not functioning, and the Sleep/Wake button isn't working as well. Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
iPhone Repair and Service - Apple Support
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D -
My Iphone 4s stucks at apple logo and restarts and cycling
My Iphone 4s stucks at apple logo and restarts and cycling,am very ****** with this issue and itunes not able to detect my iphone
Did you try recovery mode? Follow this article:
If you can't update or restore your iOS device -
hi i rescently updated my ipad 4 in ios 7.0.4 and for resell purpose i want to restore my ipad via itunes but it got stuck at apple logo and progress bar of 45% completed i tried it 50 times but it stuck on that exact point for hours i cant able to restore it and had no errors it just like freezes at one point i also uses dfu mode but got stuck at same problem using windows 7 32 bits itunes 11.3.8 ipad 4 wifi please help
My iPhone 5 wouldn't start after I turned it off a few minutes after writing this. It went into recovery mode and I had no choice but to connect to iTunes on PC and restore.
I restored to factory setting first, just to validate my phone was okay. For a second consecutive iOS update, the iPhone 5 did not update smoothly while connected to PC and iTunes - I had to retry two times before the progress bar for the update showed. (The exact same problem with the restart occured when I updated to 7.0.4.)
The good news is that I was ultimately able to restore the iPhone 5 to factory settings while running iOS 7.0.6. I did have a backup from about a month ago lying around and was able to successfully restore with that as well, so the damage done is almost negligible since I had my contacts, notes, mail, etc. backed up to iCloud.
Once I completed both restores, the sync with iTunes worked fine. -
After the restore, iphone crashes on Apple logo and cant be recognized by PC and iTunes
after the restore, iphone crashes on Apple logo and cant be recognized by PC and iTunes. I think I was actually doing the back up and my iphone shutted down and now it cant boot back up! And the PC and itunes recognized for a while like for a second and then disconnected but now neither pc nor itunes sees it. Help please!
If your phone is jailbroken, you cannot get help here.
-
Iphone stuck with apple symbol and wont start up
i updated my iphone and when it finished and went to reboot it just stays stuck on the apple symbol it constantly reboots and will never connect to my laptop i dont know what to do if anyone can help please do
Hi,
Luca224 & Ingo2711. Thanks for bringing this topic. on 29th Nov. I faced the same problem on my iPhone 3GS 32GB Firmware 3.1.2, iPhone stuck with apple symbol and wont start up. I have tried with 10 Seconds Sleep/wake-up button + home button to reset. But didn't work. Did google about an hour with many blogs. Finally I made a call to 3 iPhone care and spent 30 minutes and explained whatever I have done; iPhone customer care asked me to go to nearby iPhone service center in Sydney. BUT BY LUCK CLICKED ON iTUNE AND GOT THE OPTION FOR ONLINE FORUM FOR APPLE iPHONE. Many many thanks to Ingo2711 who has given the solution link and also thanks to Luca224 , who raised the issue. I feel, this is a common problem with iPhones those who using iPhone 3GS 3.1.2...... but try the link http://support.apple.com/kb/HT1808 and thanks to Luca224 & Ingo2711. PLEASE FOLLOW THE INSTRUCTION CAREFULY:
1. Verify you have iTunes 7.5 or later. Apple recommends using the latest version of iTunes.
2. Disconnect the USB cable from the iPhone or iPod touch, but leave the other end of the cable connected to your computer's USB port.
3. Power off the device (Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the the iPhone or iPod touch to turn off. _+(in my case - red slider didn't appear, but i pressed the Sleep/Wake button until the iPhone went off, finally it was just off... i was frustrated... tried 3 times with more patience )+_
4. Press and hold the Home button while reconnecting the USB cable to iPhone. When you reconnect the USB to iPhone, the device should then power on. +_( Do exactly as it says)_+
Note: If you see the message "Charging... Please Wait" or you see the screen pictured below, let the device charge for at least 10 minutes to ensure the battery has some charge and then start with step 2 again. +_(True ... for me it happened 3 times)_+
5. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. +_( I was nearly frustrated at my 3rd attempet; my thumb was hurting as I was holding the home button for few minutes..... but finally it worked yahooooooooooooooooo...... suddenly changed my decision.... about going to 3/Apple service center)_+
6. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message:
If you don't see the "Connect to iTunes" screen, then disconnect the USB cable from iPhone and repeat steps 3-6.
Because you must restore iPhone or iPod touch, iTunes will not recover data from the device, but if it was previously synced on the same computer and the same user account, it should restore a backup (if available). See document HT1414, "Updating and Restoring iPhone Software."
If you are still unable to restore the iPhone using this method, check Apple support for further troubleshooting and/or service options.
Note: If you sync both an iPhone and an iPod touch to the same computer, make sure you select the correct backup to restore your settings from (don't select an iPhone backup if you have an iPod touch and don't select an iPod touch backup if you have an iPhone).
**** ( BACKUP FROM YOUR iTUNES : MAC/PC; AS I GOT MY 95% DATA FROM THERE.... GOOD LUCK)******* IF IT WORKS PLEASE POST YOUR EXPERIENCE....*
THANKS -
Iphone stuck on apple logo with loading circle
iphone stuck on apple logo with loading circle every 5 minuits.
the problem is that it is not responding to turn off by pressing power + home buttons>
Also when i managed to trn it off and press the home button while pluging the USB cable to get into recovery mode nothing happend and the computer doesnt recognize the i phone.
Can any one help please to turn off my iphone and restoring it?Hi and welcome to Apple Discussions,
If you can't restore the iPhone from recovery mode, it will need service.
This article: http://support.apple.com/kb/HT1808 will walk you through restoring from recovery mode.
This webpage: http://www.apple.com/uk/support/iphone/service/faq/ provides answers to Frequently Asked Questions about iPhone service in the UK.
-Jason -
IPhone stuck on Apple logo!!! PLEASE HELP!
I was restoring my iPhone and on my computer there showed an information that I have to wait a few seconds and my phone will start working again. There appeared that Apple logo on my phone and it's stuck.... what should I do? Please help!
Don't wink, there always have a solution for problem. The following steps with a three-party sofeware which named iPhone Data Software can help you to solve it.
First, fix the problem of iPhone stuck on Apple logo screen
Second, restore data from iPhone directly
Or
Third, recover lost data from iTunes backup
When the lost files are recovered, you can keep your Contacts, SMS, Photos, Videos, Calendar and Notes on your computer as a backup, to avoid losing your data the next time. -
IMac is stuck on apple logo and spinning wheel
My wife did a software update and them it asked for a restart, she click restart but the computer got stuck in apple logo and spinning wheel. Won't go past that now. Just keeps spinning! Help for I know not what to do!!!! Please any idea?
An invalid node is an error DU cannot repair. If you don't mind spending $100 for Disk Warrior, then I suggest you buy it because it can fix the error. Otherwise, do as the warning says. Backup your files. You will then have to erase the drive and reinstall. The procedure is:
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
Maybe you are looking for
-
Photoshop Elements 7 - error when trying to open multiple images
i have attached a screen shot of the error that i get when i try to open more than 1 image at a time. the program ends up closing and i have to re open the program. i have xp pro installed on my pc. my pc is part of domain. if i log on to the pc as a
-
while creating SAP ISU Device category EG01 .i got one error message like The material 5 does not exist or is not activated Message no. M3305
-
Grant access to package in schema2 from schema1- how? Or...
Hi I am trying to test utPLSQL. utPLSQl is installed in schema1@instance1 and the package that I need to test is located in schema2@instance1. How can I access package to be tested present in schema2 from schema1? The package has a number of procedur
-
Integration builder doesn't start after repairing OS
Guys, I am trying to trouble shoot this problem for the last one week. Have no clue. I posted it in XI board too. Not much help till now. Every thing was working fine till i messed up my OS. I repaired my OS(windows 2003). I am able to start XI. but
-
Playback of file causes appletv to reboot
i converted a whole batch of tv episodes, all converted using the same program and the same preset. they are all a 4:3 ratio and were converted from DVD. now, it appears that some have a resolution of 788x576 and some are 788x592. now, for some reaso