IPhone 4 touch screen not working properly

i have a white iphone 4 (at&t if that makes a difference)
it used to work perfectly, i havent dropped it a single time, i dont have a case on it, neither do i have a screen protector.
these past two days, my screen is going crazy. yesterday, while i was texting, when i click on backspace (to erase a mistake) it clicks the return button automatically and it doesnt stop for like 2 seconds so it skips a line for 2 seconds. then when i try to type, when i click on the letter R, it clicks on the letter S (for example). or when im on safari, i try scrolling up, it opens a website or clicks on something completely away from where i touched the screen. when it happened yesterday, i turned off and on the phone by holding the home+power buttons together until it turned off. it worked yesterday but today, it became crazier. it was wayyy worse. i cant use the phone normally because of this. sometimes i cant even unlock the phone. or it automatically ends the call when im talking to someone. when i unlock the phone, it starts acting upon itself and opens apps or opens the texts and types random letters. this is getting really annoying now that i cannot use my phone normally. is this only happening to me or has it/is it happening to someone elsee.. if it HAS HAPPENED in the past, how did you fix it ?
someone please help me! thanks

Good Morning S.GOPINADHAN,
I understand your iPhone screen is black and you are not able to turn it on.  The article below will explain what to do when your iPhone is not responsive.  I'll also include instructions on how to back up your iPhone when you are able to turn it on.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
https://support.apple.com/en-us/HT201412
iCloud: Back up your iOS device to iCloud
https://support.apple.com/kb/PH12520?locale=en_US
Regards,
- Judy

Similar Messages

  • How to fix apple iphone touch id not working properly?

    I have a iphone 5s,, it's touch id is not working properly.. even after multiple attempts,, it is not working properly... what to do..??

    Hi palash_1993,
    Welcome to Apple Support Communities.
    The article linked below provides a lot of great information and troubleshooting suggestions that’ll resolve issues like the one you described, where you're running into Touch ID issues with your iPhone 5s.
    Use Touch ID on iPhone and iPad - Apple Support
    Get help with Touch ID
    Make sure that you're using the latest version of iOS.
    Make sure that your fingers and the Home button are clean and dry.*
    Cover the Home button completely. Don't tap too quickly, don't press down hard, and don't move your finger while Touch ID is scanning. Make sure that your finger touches the metal ring around the Home button.
    If you're using a case or screen protector, make sure it doesn't cover the Home button or the surrounding ring. If it does, remove the case or screen protector and try again.
    Tap Settings > Touch ID & Passcode and make sure that iPhone Unlock or iTunes & App Store is on. Also make sure that you've enrolled one or more fingerprints.
    Try enrolling a different finger.
    If you can't enroll any of your fingers, take your device to an Apple Retail Store, Apple Authorized Service Provider, or contact AppleCare for help.
    * Moisture, lotions, sweat, oils, cuts, or dry skin might affect fingerprint recognition. Certain activities can also temporarily affect fingerprint recognition, including exercising, showering, swimming, cooking, or other conditions or changes that affect your fingerprint.
    Cheers,
    -Jason

  • Brand new ipod touch screen not working properly

    My sons brand new ipod touch 32gb (well bought april 14) only occasionally will respond to the touch sceen, and when he does get into it the next screens dont work properly. Any suggestions?

    Try #2 and 3 in link below. If neither help, it's most likely a hardware issue then. Contact Apple and get it serviced.
    Basic troubleshooting steps. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

  • Touch screen not working properly

    I've encountered a weird problem with my newly purchased iPhone 3G S.
    The touch screen doesn't work as it ought to. I.e. when I "slide to unlock" nothing happens at first if the iPhone lies on the table, but if I pick up the phone and hold it in my left hand while sliding to unlock with my right the touch screen suddenly works flawlessly. It also work when it lies on the table and I hold two fingers on each side of the phone while I operate the phone with a third finger!?
    If my description doesn't make sence I've documented the problem with this small video (please disregard the sound - I'm speaking Danish).
    http://www.youtube.com/watch?v=pcyscv8wFg0
    This isn't my first iPhone and it wasn't an issue on the 3G version that I had earlier.
    Have anyone of you got an idea how to fix this or do I have to RMA a 14-days-old phone?
    Best regards
    Kenneth

    You might find some help here: Troubleshooting touchscreen response: http://support.apple.com/kb/TS1827
    But, you'll probably end up exchanging it.

  • HT4623 my iPhone touch screen not work

    How to update your iPhone, iPad, or iPod touch

    This Apple doc should be able to help ya out -> iPhone, iPad, iPod touch: Troubleshooting touchscreen response

  • IPhone 4 touch screen not working

    iPhone 4 touch screen not working properly. Sometimes it activates icon itself. After updating to iOS 6.12, it stop working totally.

    Good Morning S.GOPINADHAN,
    I understand your iPhone screen is black and you are not able to turn it on.  The article below will explain what to do when your iPhone is not responsive.  I'll also include instructions on how to back up your iPhone when you are able to turn it on.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    https://support.apple.com/en-us/HT201412
    iCloud: Back up your iOS device to iCloud
    https://support.apple.com/kb/PH12520?locale=en_US
    Regards,
    - Judy

  • HELP: iPhone 6 Keyboard/Touch Screen Not Working

    Hello.
    I recently acquired to an iPhone 6, which has been working properly for the last two weeks. Today, my keyboard/touch screen stopped working properly. When I am typing in iMessage, or trying to compose an email, enter a URL, or anything else that requires my touch keyboard, my "123" button that switches to numbers, punctuation, and special characters does not open. I updated my software to iOS 8.3., which switched to a new and "improved" emoji keyboard, but I did this after my keyboard had already become unresponsive. If I click on the emjoi keyboard icon to switch over, the "ABC" button to swtich back to QWERTY is unresponsive. This is REALLY frustrating! The phone is two weeks old, and I cannot use to for a huge chunk of functionality.
    It's not a dead spot on the touch screen. When I am not trying to access the keyboard, that little bottom left corner works fine to open/use my Phone app.
    I really don't want to reset my phone. Any other ideas?
    I made a Genius Bar appointment for next Wednesday 4/15, but that seems like an eternity from now.
    Please help!

    To make sure that this is not software related, set it back to factory settings, without using any backup data afterwards. Set up the rest of the personal settings manually and test the Touch Screen . If it still does not work, this is a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider:
    Use iTunes to restore your iOS device to factory settings - Apple Support
    Find an Apple Authorized Service Provider
    iPhone - Contact Support - Apple Support

  • I am facing a new problem after a missed call. i phone will get freez on its lock screen after a miss call. Its seems that its main screen touch is not working properly.  This problem occurs after each and every missed call.

    I'm using iphone 5s with ios 7.1.2  & I am facing a new problem after every missed call. i phone  gets freezed on its lock screen. It seems that its main screen touch is not working properly. It should be bug introduced by apple . This problem occurs after each and every missed call .There is no patch announcement for this issue yet. There are few workaround to fix this issue: Reboot your iphone. But its  irritating to reboot the phone frequently after each issue....

    Hello dipthebe,
    Check out the articles below go through troubleshooting steps for your iPhone when the screen is unresponsive. You may want to try and restore your iPhone as a new device and then test out what happens when you miss a call to see if the issue is still present afterwards.
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/HT1414
    Regards,
    -Norm G.

  • My iphone 3gs is not working properly, when switched on it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and more often than not just resets itself.

    My iPhone 3gs is not working properly and hasn't been since about September of last year. When switched on (Quite often it won't even turn on) it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and just resets itself over and over until power is gone. Occasionally after switching on and off a few times it functions normally for a few hours and some times even a couple of days but eventually always turns itself off and goes back to the 'Update Completed' screen. Does anyone know what might be causing this and/or a way of fixing it?

    Morning JordenR,
    Thanks for using Apple Support Communities.
    You can resolve many restore issues using the troubleshooting steps documented here.
    For more information on this, take a look at this article:
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/ts1275
    Best of luck,
    Mario

  • Touch pad not working properly for iphone 4s

    touch pad not working properly for iphone 4s. Few letters are not working at all and my phone ios slowly loosing touch sensitivity. I lost my phone and got the new phone 10 months back.

    Try here >  iPhone:  Troubleshooting touchscreen response
    Also go to settings>general>reset>rest all settings phone will turn off and turn on by itself
    Once the phone is press and hold the home and power button at the same time wait for the apple sign then release the buttons phone will turn off and on.
    Update the software of your iphone or restore the phone to its factory settings

  • My music app on my iphone 5 is not working properly since I downloaded ios7.

    The music app on my iphone 5 is not working properly since I downloaded ios7.
    Sometimes I start to use the music app and then part way though a track it stops. I try to re-start it with no joy. I'm also finding the touch screen is less responsive. Can any help me fix the issue or will I need to take it into the store?

    Removing the SIM has no affect on the power of the phone. It is just the part that facilitates connecting to your carrier. Try holding the sleep/wake and home buttons together until you see the Apple logo on the screen and then release the buttons. The phone should reboot. You may need to hold the buttons together for 15-30 seconds.

  • Touch is not working properly

    I have hp omni 10 .one day I change option of re calibrated now touch is not working properly how I can fix this

    It seems that one of the Windows Updates is causing some conflict with the touchscreen driver/firmware. Try the following steps as a temporary work around until HP can come up with a permanent fix.
    1. As you power on the Omni 10, press the hardware Volume Down button to get into the BIOS menu
    2. Select BIOS Setup (if the touchscreen is not responding, you'll need to plug in a USB mouse via a micro USB male to USB female adapter)
    3. Select Exit on the LEFT side of the screen
    4. Select Load Setup Defaults on the RIGHT side of the screen & select Yes
    5. Select Exit Saving Changes on the RIGHT side of the screen & select Yes
    After the restart, the touchscreen should work again.

  • Ipod touch 32 GB touch screen not work

    32GB  ipod touch touch screen not work  WHAT TO DO SOME BODY HELP ME MY PHONE NUMBER 09880252978

    If your iPod is not dry, dry it before further use. To dry:
    How to fix a wet iPod or iPhone | eHow.com
    It recommends drying for seven days and changing rice every day.

  • My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

    My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

    If after you charge it for about three hours and it only last about five minutes the battery is probably dead or there could be another hardware problem.  I would go back to the Apple store and ask them specifically how can it be OK if the fully charged battery only lasts five minutes.

  • LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly

    Hello, I'm having an issue with a LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly. I have followed the instructions to reset the printer, but now am unable to select 'English' as my language because every time I select the 'English' option 'Spanish' is selected. I am then given two options to select 'Si' or 'No' both of which can not be selected on the touch screen?
    Anybody know of a way round this?

    Hi @dnhowes ,
    I see that you are having issues with the touch screen not working correctly. I will do my best to help you.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
    Was it the Nvram reset back to factory settings that you tried or a hard reset?
    Try selecting the option on the display a little higher above the icon to see if that helps. Some touch screens are finicky.
    I find that on the Lab printers when I am selecting different menus.
    If the issue continues, please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

Maybe you are looking for

  • IPod not going to sleep correctly

    Hi there, I am having an issue with my iPod 5G not going to sleep correctly. When I select the "Sleep" function on the menu screen the iPod with stop responding to the wheel, as per normal, BUT the screen only fades and does not blank itself complete

  • How to handle an ADFC-12000?

    I've seen another post on ADFC-12000, but am not sure if I have the same problem or not. One of our QA testers sometimes gets this error moving between pages in our application, but usually there is no issue. I don't see any of our code involved in t

  • Manifest for jar file

    hi i create an jar file Manifest-Version: 1.0 Main-Class: com.IR.IRoom Class-Path: classes12.jar aqapill.jar aqapi.jar aqapi60.jar art.jar arutil60.jar atli2.jar atli2_ip.jar atli2_ip_cio.jar bsh.jar codeset.jar commons.jar commons_httpclient.jar com

  • IPhoto says my photo library is unreadable?!?

    When i open my iphoto a notification comes up : but i have not changed even used iphoto for about a year now. I have tried holding down option + command keys and this menu comes up: i have tried every single option however it just comes back with the

  • ICloud 2.1.1 not working with Microsoft Outlook 2013?

    HI, I needed some assistance from the experts here. I just had my laptop reformatted and redownload & installed the latest version of iCloud 2.1.1 Control Panel for Windows & Microsoft Office 2013. When I click on the buttom "Apply" to setup outlook