IPhone 4 upgrade to iOS 7.1, cannot hear voice during phone call

I recently updated to 7.1 and suddenly I cannot hear voice during the phone call. I can still hear voice using earphone. Has anyone experiencing the same thing? Need help. Thanks.

I have the same problem with my iphone4 32g.
After my phone was updated to ios7, people cannot hear my voice in a telephone conversation (regardless of who makes the call); however, they can hear my voice perfectly in a facetime or skype session.
I managed to record my voice using the iphone so the problem may not have to do with the phone's hardware (mic or debris in the earphone jack). I highly suspect it is due to ios7, but I cannot rollback to ios6 to prove my hypothesis.
I have performed factory reset but the problem still persists. So now I have a an iphone that can't be used to make a phone call, and this is frustrating.
I used to have high regards for the apple brand. Not anymore.

Similar Messages

  • TS1286 cannot hear voices en phone call can only use headset

    cannot hear voices en phone call can only use headset

    try to switch to loudspeaker mode. If both loudspeaker and normal mode doesn't work, then ur speaker would be damaged. Visit your nearest apple service center.

  • Cannot hear voice on incoming calls

    Hi guys,
    Hope someone can help me. All of a sudden I cannot hear voices on incoming calls. I hear voices on outgoing calls perfectly fine. My phone did not fall or anything like that.
    Thanx

    Hi marjorieh,
    Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    You may also want to try performing the following.
    Menu > Settings > Apps > All > Smart Connect > Clear Data
    Once done try using the handset.
    I hope this helps.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • HT201401 My iphone 3GS keeps freezing and showing the apple logo during phone calls.  Can anybody help plese ? Bee

    My iphone 3GS keeps freezing and showing the apple logo during phone calls.  Can anybody help plese ? Bja

    Hiya thankyou for the answer.
    Trying to set it up as a new device but can't find the backup to save it.
    I have no "mediasync" folder in my library/application support. Did these folders get moved around with Lion?
    Thankyou again,

  • People can't hear me during phone calls.

    I have an iPhone 3 and I now people cannot hear me talking. I can hear them. It works fine if headset is plugged in and speaker works but trouble on phone calls.

    Have a look here:
    Out-of-Warranty Service
    If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
    iPhone model
    Out-of-Warranty Service
    iPhone 5
    $229
    iPhone 4S
    $199
    iPhone 4, iPhone 3GS,
    iPhone 3G, Original iPhone
    $149
    copied from Apple - Support - Service Answer Center

  • Problem : I hear them ; They Don't hear me During phone calls

    Hi ,
    I've got my iphone 4 and it's about 2 weeks old
    I updated it to V 4.1
    now i'm having this problem ..
    during a phone call .. i can hear the callers clearly but they cannot hear me
    my microphone is working cause i checked it with the video recorder & voice command
    it's only not working with the "phone program" ..
    tried using headphones still no success .
    I've read alot of threads .. a month old .. but without any solution
    I tried Restoring which fixed the problem at first , then it came back again !
    any help ?

    I have the same issue so what is the solution....?

  • Iphone 5s does not transmit voice during phone calls

    iphone 5s does not transmit my voice during a phone call.  Just started happening.  The microphone works with Siri and the speaker works fine as I can hear the person I called.

    Hello there, Susina.
    The following Knowledge Base article has some great pointers for troubleshooting your issue:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Upgraded to IOS 7, now cannot hear callers and they cannot hear me.

    Speaker and mic works perfect for music, voice notes, voice mail... everything but making phone calls

    Have you reset since the upgrade? Hold down the home button along with the power button until you see the Apple, then let go.

  • Since upgrading my iPhone 5 to ios 7, I cannot get the internet, email to work on 3g.  I get the message ""could not activate mobile data network. You are not subscribed to a mobile data service".  How do I fix it?

    Since upgrading my iPhone 5 to ios 7, I cannot get the internet, email to work on 3g.  I get the message ""could not activate mobile data network. You are not subscribed to a mobile data service".  How do I fix it?
    I've contacted o2, tried all of their suggested updates and changes, reset my phone 3 times and still no luck.
    Any help appreciated.
    Thanks,
    Louisa

    Hi, l have the same problem, were you able to resolve?

  • Since upgrading to iOS 6, I cannot save or transfer photos to iPad or iPhone. Is it a glitch with the upgrade?

    Since upgrading to iOS 6, I cannot save photos to my iPhone or iPad or transfer pictures taken. Is it a glitch with the upgrade?

    Can you be a little more specific? Do you mean that when you take photos with your iPhone camera or iPad camera they are not showing up in the photo stream? Do you mean that you are trying to sync your photos to a computer and that they are not syncing? Just not sure what you are asking?
    GB

  • After upgrading iphone 5 to iOS 7, I cannot install new apps

    After upgrading iphone 5 to iOS 7, I cannot install new apps.  I get the message that I must first read and agree to iTunes terms and conditions.  I read the terms and conditions online, but I don't see a way to agree when I install or re-install iTunes 11.1.  I can update existing apps ok, though. 
    Anyone have this problem and find solution?

    Delete & ReInstall the App Store...

  • I upgrade my iPhone 4 to iOS 7, but cannot restore the backup "error when restoring iPhone (-1)", anyone know what should I do?

    I upgrade my iPhone 4 to iOS 7, but cannot restore the backup "error when restoring iPhone (-1)", anyone know what should I do?

    That error often indicates a hardware failure.Try restoring a few more times. If it consistently gives you that error, make an appointment at the genius bar to have it looked at.

  • I have a new iphone 5s with ios 7 , I cannot pair with the bluetooth in my BMW with idrive , can anyone help . My old iphone 4 worked fine , however this was initially paired with older software , but still worked after the upgrade

    I have a new iphone 5s with ios 7 , I cannot pair with the bluetooth in my BMW with idrive , can anyone help . My old iphone 4 worked fine , however this was initially paired with older software , but still worked after the upgrade . I have tried & tried to pair again & that wont work either , suggesting it is the phones software . Can anyone help please

    Hi there soulboycraney,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/ts3581
    -Griff W. 

  • I'm using i phone 3gs after upgraded to ios 5 few hours from shop my phone totally shutdown and cannot on.how to solve it.tq

    help..help...my i phone 3gs after upgrading to ios 5 for few hours thn my phone "pass away"total cannot on anymore.how to solve this problem.tq

    Thanks for the clarification.    Yes, I do access my email from 2 different sources. 
    FYI, I use the POP mailserver as I need most of the information to be loaded onto my PC while on a plane / not connected to the interenet.
    The primary use of mail on my iPhone is to be available as much as possible - even when I'm away from my office.
    Thanks again for your help.   I'll start deleting them in segments of 100.......

  • I interrupted my iphone upgrade to ioS 6 and now my phone just keeps showing the apple. it wont restart or show up when I plug it into itunes!!!!

    Help! i accidently interrupted my iphone upgrade to ioS 6 and now my phone wont turn on completely. it just keeps showing the apple. it also wont register with itunes...i have tried turning it off and restarting it multiple times but nothing is working. HELP!

    hey man, i feel your pain... here's my story and i'm pretty sure this will work for you... on the 19th of september i went to upgrade ios 6 and paused it about 1/10 through... when i plugged my phone up at night the screen was at the normal lock screen.. when i woke up at 10:30 am i went to check my phone and the screen appeared as an apple logo with a progression bar about 6/10 full.. it didn't seem to be progressing any more, but i guess that was only because it was so slow trying to download over wifi because it had all night to finish downloading.. anyways i needed to check my texts and the time so i held down the lock button and the phone turned off during the download.. when i tried to turn it on the apple logo would appear like normal trying to boot up.. then it would fade away and cut off.. then seconds later try to turn on again, by itself, repeatedly for hours on september 20. i tried restarting it (holding lock and home button down 10-15 seconds) but the problem with that is that the phone was already trying to turn on itself so it never would restart correctly... (continued turning on and off by itself).. i went to verizon and they said my phone is screwed.. go to apple if you wanna pay.. i called apple support and a lady helped me out here's the solution that worked after hours of thinking my phone is totally screwed.. when the phone is dark and cut off.. press and hold the home button before you plugin your sync cable to your usb port.. (have itunes up and ready) continue holding the home button and plugin the sync cable.. still holding the button, wait for a message from itunes appear that says it recognizes your device in recovery mode.. press ok.. the screen on your iphone should be a snyc cable and and arrow pointing to an itunes symbol... from there it is pretty self explanatory.. you will need to restore and update your phone from there which should be an option after you press ok... it takes awhile.. your phone will then go through one, or maybe a few progression bars (it may vary, not sure).. while your itunes will be restoring software & firmware.. when everything is done on itunes and your phone.. your phone should boot right up!!! reply if you have any more questions.. i'm so glad i resolved my issue today.. good luck!

Maybe you are looking for

  • Material master-additonal unit of measurement

    HI, I have three questions a) we have the follwoing data defined in material master (additonal data) X UOM Y UOM EAN 1 LITRES 1 LITRES NIL 1 IGB (inner packg) 20 LITRES 345922222222 1 GBE (packg) 20 LITRES 345922222222 I need to know what is EAN no a

  • Restore iTunes after clean install

    Hi, I'm thinking of doing a clean install of ML beacuse of some issues with the computer. After the install I only want to get my iTunes library and play counts etc back to the computer. How do I do that? Can I use a Time machine backup or do I have

  • Printing and Proofing with multiple profiles

    I have a book project where two kinds of papers is used. One more yellow than the other. For both of these papers I have a different profile. Is there any way that I could define different output/proofing profiles for different parts of the document?

  • Cell colouring in a JTable

    I am stuck with this problem. I have generated a large table and inserted the results of calculations into the 2D table. My next problem is then to highlight the rows and columns that contain the highest value. I have seeked advice on this matter bef

  • Equal Join and Outer Join in OBIEE

    Hello expert, I think the default join in OBIEE is Outer Join. So no matter what join conditions that I specify on the physical layer, the result that I get in the presentation layer is still outer join. How to specify the equal join or inner join in