Iphone 4 vibration not working after upgrading to ios5

Hi,
I have upgraded my iphone4 iOS from 4.3.5 to iOS5. Then onwards my phones vibration seems not working. I tried with restoring with itunes but doesn't helpful to me. Could anyone face this issue/any resolution.
FYI... apart from vibration, remaining alerts are absolutely working fine.
Thanks,
Bala K

Solution found: iphone 5, iOS 7.0.6
Settings > General > Restrictions > (enter passcode) > ...scroll down to "privacy" section and select Microphone > Tick "Allow Changes"
Then open Skype App, and it will request access to the Microphone > Allow
Note, on this screen you have the option to disable all restrictions, or Allow (un-restrict) only specified Apps (e.g. Siri).
Hope this helps.

Similar Messages

  • Auto brightness does not work after upgrade from iOS5 to iOS6 on my iPod touch. Is this intended by Apple, or is it a bug?

    I attempted to ask this question, yesterday. However, I am not used to typing with my thumbs, yet, and messed it up some. So, I will give this another try. Auto brightness does not work after upgrade from iOS 5 to iOS 6 on my iPod touch. Is this intended by Apple, or is it a bug?

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
    iOS 6 changed how that feature works.

  • IPhone Bluetooth not working after upgrading to iOS 6.1.2

    I used to pair my iPhone with my Blue&Me system in my Fiat Car and it was working perfectly hitherto. Recently I have been experiencing problems with Pairing my phone with my car Bluetooth system (Which I sometimes use for receiving calls).. The phone though identifies the car system in the discovery mode but is not able to pair  and establish connection. My car Bluetooth system is working just fine with other phones. Request apple / or anyone who can help to help me overcome this issue. My car system is as important to me as iPhone and if this problem persists, i may be forced to change my phone.

    In the 4+ years of using iPhone and several other apple products, this is the first time that I am feeling frustrated with my iPhone 4S and Apple. I am surprised that so many people around the world are facing the problem with their blue tooth devices after upgrading the iOS and still there is no hope of having this situation resolved. The cause of breakage of communication between iPhone (my investment, my ownership) and other devices is of apple origin and apple can't walk away by suggesting that the other party should upgrade the Bluetooth Firmware.
    In my case, My iPhone 4S stopped paring with My Fiat car blue&me system after updating to iOS 6.1.2. The problem has not been solved in iOS 6.1.3.
    If this problem is not solved in next update the ovious solution is to move to android as I can change my phone but I can't change my car that eaisly.

  • Iphone4 vibration not working after upgrading to ios 7

    I upgraded my i phone 4 to ios 7 and drom then vibration is not working....!!!
    I dont know how could apple lag this feature in a iphone4 ios7
    I find my iphone really annoying without the vibration feature

    I should also mention, I've tried multiple browsers (Chrome, Safari, Opera), all with the same result.

  • IPhone search not working after upgrading to 5.01

    Not sure why, but is anyone else experiencing this problem? I've reset my iPhone to to know avail.

    Same problem on iPhone 3GS after upgrade. Also having battery issues and hotspot no longer works

  • 3GS Iphone wifi not working after upgrade

    I upgraded my 3GS iPhone to version 6.1.1
    After upgrading the iPhone I noticed that wifi wasn't working from the typical areas of my house, so I looked for a fix on these Community Forums and elsewhere on the web. Nothing has worked. I reset the network settings and tried amny other proposed fixes. Then, I walked to within 10 feet of the AEBS, and noticed a weak WIFI signal. Bluetooth worked just fine by the way.
    I then upgraded my Gen 4 Airport Extreme Base Station to the latest firmware "hoping" that my resolve the loss of WIFI on the iPhone. It didn't.
    I am going to try a factory reset next.
    Any other recommendations? May the impending iOS 6.1.2 will revive the WIFI on my 3GS? I can only hope at this point.
    Thanks in advance for your recommendations.

    @shldr2thewheel, you are correct, I accidently typed an extra ".1". The version is 6.1 (10B141). Thanks for the post-spellcheck.

  • IPhone sync not working after upgrade to 2.02

    Hi All,
    I upgraded the firmware to 2.02 this morning, and now iTunes will not recognize my iphone when trying to sync. The phone appears in the itunes interface, but everytime I try to sync I get an error message that iTunes cannot find/sync my iPhone?
    Anyone experienceing this? Any help?

    Had same problem....Apple tech guided me through this procedure that worked fine...
    1) Sync your phone so that everything on your computer is as it should be.
    2) RESTORE phone to factory settings. This is a choice in iTunes under the Summary tab when you have your iPhone device selected.
    3) During this procedure you will be asked if you want to SET AS NEW PHONE. It is important to select YES to this option. This procedure takes some time...15-30 minutes
    4) Set up your options for syncing from iTunes under the Info tab. If you change any settings here and ALLOW it, syncing will automatically happen. Make sure your calendar is being synced.
    5) Check out the results...should be good.....I needed to sync a number of times to get everything back to normal.
    6) Since doing this, the calendar syncs as it should and did before the upgrade, alone with everything else I want to sync.
    Good Luck

  • Earpiece on new iPhone 4 not working after upgrading to 4.2.1

    I purchased my first Apple product (iPhone 4) 3 weeks ago with firmware 4.1. Finally I decided to upgrade to 4.2.1. Now when making a call I can't hear a tone or anyone talking to me. Switching to speaker works fine and so do the earbuds when connected. I read many have had the same issue and they just plugged/unplugged their earbuds a few times. Seems the iPhone forgets that the earbuds were unplugged. I tried the same and it didn't help. There is nothing stuck in the jack either. Now what?

    I'll lay odds there's a piece of lint or something stuck in the headphone jack. Take a look and try to get it out with a pin or something. Happens occasionally, pretty much always to men as opposed to women. Mainly because we tend to carry our phones in our pants pockets instead of a purse.

  • My touch screen on my iPhone 4S not working after upgrading to ios 7?

    I upgraded to iOS 7 and all the sudden when I go to type in my code to unlock my phone it is really laggy, when I finally get into my phone and go to use the keyboard to type a message it acts like I haven't even touched the screen when I go to type.

    Unfortunately with all of the problems and such an unstable OS today is my last day using my iPhone. I love my phone and have had it on my company business account for the last 4 years but it has become so prohibitive to use as a business tool I am forced to move to the company’s Galaxy based phone. I hope at some point in the future things will improve and I can once again have my iPhone back on the company plan.  Good luck all I will be rooting for you.

  • Iphone 4 Home button not working after upgrade to OS 4.3.5

    Iphone 4 Home button not working after upgrade to OS 4.3.5.Please help!!!!!!!!

    It seems that settings of mail accounts have something to do with it. I've delete my gmail account and am now using Microsoft Exchange. It seems better, yet not perfect. The issue is definitely due to OS 4.3.1
    Apple answer is - no answer. It is a shame that the quality of their products, in terms of design and concept, is not match by a care for customers. It is not normal that I, as a customer, have to spend hours reading Apple Discussions forum to try to understand what the problem is. A little more respect for a customer that spend big $$$ buying their products wouldn't hurt.

  • IPhone 4's WIFI has been not working after upgraded to 6.1.3(10B329)

         My IPhone 4 was working fine with its WIFI when it is running in default IOS version, I believe it was 5.x.x version, however after I upgraded to 6.1.3(10B329) then WIFI got very aweired issues again and again.starting from then I never get my WIFI working again:
    1. Sometimes I can connect to my home's network and keep alive for 1-2 minutes then WIFI will not work on IPone, my home's router is not working either, I need to restart my home's router manually;
    2. I can connect to my office's network and keep alive 5-10 minutes then WIFI is not working, however my office router is not affected; however the following days then I can't connect WIFI to office's network any more.
    3. I tried to connect to other public area's free network via WIFI, however never joined in.
         I called Apple's service centre couple of times they have no clues, they said they never met this problem before for WIFI not working after upgraded to IOS 6.1.3 and no suggestions from them at all, every time I called them they gave me the same suggestion, such as restore-re-install, check your own router etc, nothing help, however my friend bought a brand new IPhone 4 with default IOS version 6.1.3 which is working perfectly without any issues on its WIFI then I believe this is a completely software issue.
         I know this is a general issue for Apple users and I refuse to upgrade to higher version as I am not sure the higher version can fix this issue however I am pretty sure the newer version of IOS did bring a lot of new bugs, anyone can provide me any suggestions guys ? THANKS A LOTTTTTTTT!!!!!!!!!!!!!!!!
    Terrence

    I have fixed this issue after upgraded my router's firmware finally, this is a completely compatibility issue between Apple and other third party manufactures, hopefully we can get compabitlity list for each future IOS version ahead of time which can potentially avoid such kind of embarrassing situations moving forward, thanks !

  • Ipohone 4 hotspot not working after upgrading to ios7.1 ?

    my ipohone 4 hotspot not working after upgrading to ios7.1 but my some friends having iphone 4s its works fine and those having iphone 4 it's not working although we all have same operator and same operating system (i.e ios 7.1).I think this is problem only  with iphone 4 users with ios 7.1 , so apple plz fix it in ur next update.

    You don't like the answer?
    Again it's not a bug, use a supported carrier if you want Personal Hotspot.
    Read the list one more time, if carrier is not on the list, IOS7.1 patch the loophole.
    Message was edited by: ckuan

  • Personal hotspot not working after upgrading to ios7

    Personal hotspot not working after upgrading to ios7

    I was having this problem (iphone 5 wouldn't work as hotspot for my PC laptop) and had tried everything suggested on these message boards, so I finally went to the Apple Genius Bar and they fixed it for me.  Here's what they did:
    1) Turned the Hotspot off on my iphone
    2) Went to the Control Panel on my laptop to "Network and Internet" > "Network and Sharing Center" > "Manage Wireless Networks" (on the left navigation panel) and deleted my iphone from the list of WiFi connections I've attempted.
    3) Flipped the manual WiFi switch on my laptop to Off and then back On again (to reset it)
    4) Turned the Hotspot on my iphone back on
    After that, when I tried to connect, it worked.  Hope this works for someone else.

  • IPhone 5s not working after voice over turned on

    iPhone 5s not working after voice over turned on

    Hello ss1997,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue where your iPhone will not boot past the Apple logo please follow the steps in the article below.
    iOS: Not responding or does not turn on
    Take care,
    Alex H.

  • File- Export not working after upgrade from 11i to R12

    Hi,
    File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
    If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
    Thanks and Regards,
    Jagadeesha

    Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
    In Argument 0 - Type: Integer Value: 196613
    In Argument 1 - Type: Number Value: 54
    Out Argument 0 - Type: String Value: 12
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Entering app_menu.set_prop.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing FIND_MENU_ITEM Built-in:
    In Argument 0 - Type: String Value: FILE.EXPORT
    Out Argument 0 - Type: Integer Value: 19
    Executing GET_MENU_ITEM_PROPERTY Built-in:
    In Argument 0 - Type: Integer Value: 19
    In Argument 1 - Type: Number Value: 79
    Out Argument 0 - Type: String Value: TRUE
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_menu.set_prop.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
    Out Argument 0 - Type: String Value: NORMAL
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
    Out Argument 0 - Type: String Value: NORMAL
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: NULL
    In Argument 1 - Type: String Value: GLOBAL.OUT
    Executing USER_EXIT Built-in:
    In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
    FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
    FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.OUT
    Out Argument 0 - Type: String Value: N
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_form
    Out Argument 0 - Type: String Value: FNDCPVCM
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_block
    Out Argument 0 - Type: String Value: MASTER
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_form
    Out Argument 0 - Type: String Value: FNDCPVCM
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_block
    Out Argument 0 - Type: String Value: MASTER
    Executing GET_APPLICATION_PROPERTY Built-in:
    In Argument 0 - Type: Number Value: 75
    Out Argument 0 - Type: String Value: IHR40P
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
    FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
    FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
    # 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
    WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
    # 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
    WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

Maybe you are looking for