IPhone 4 w/ ios 4.0 not recognized by iTunes 10.3

When I plug in my iPhone 4 with ios 4.0, it is not recognized by the new iTunes 10.3.
When I plug it in, it works like a charger, it charges, but its not recognized.
What should I do?

Update to the current iOS.  Why wouldn't you? If part of you system is current, and part is out of date, there is always a chance of incompatibility.

Similar Messages

  • My iphone 4 with IOS 5 will not mount in iTunes. Please help.

    my iphone 4 with IOS 5 will not mount in iTunes. I think it's due to icloud but i turned icloud off on my phone. Now music in my itunes that i have ripped from CDs cannot be put onto my phone. My iPhone will charge when lugged into my mac book pro but will not mount in iTunes. Also I have Snow leopard on my laptop. Can anyone help.

    I have precisely the same problem.  The Mac mini will not see the iPhone in iTunes, Disk Utility or Image Capture.  My MacBook Air, with a different iTunes library cannot see it either but they can both see my iPad & iPods.
    I have tried restarting the computer with only the iPhone connected via USB.  No help.  I do not see the point in re-loading iTunes if my other machine cannot see it but can see other iOS devices.
    All software is up to date on machines & iOS devices.

  • IPhone with new MacBook Pro - phone not recognized by iTunes

    So, I got a new MacBook Pro and connected my iPhone to sync it with iTunes. But the iPhone isn't being recognized.
    Anyone know what steps to take to get it to recognize the phone to sync? There are no error messages. Just a phone that doesn't seem to want to sync.
    I checked the phone by plugging it into another lap top, and it gets recognized right away, so I'm thinking it's related to the latest iTunes or the MacBook Pro.
    Thanks!

    Went to the Genius Bar, The tech decised it was a bad logic board. I got a new computer to replace a week old one. After going through setting it up again, I have the same issue. System Profiler sees that an iPhone is connected, but not iTunes. I can not sync to the new MBP. At the moment, I am syncing to my old MBP, just so I have the iPhone set up as I had it.
    BTW, if you go through the "iTunes does not see iPhone" suggestions and enter DFU (restore mode) your iPhone gets bricked. But it is recoverable by using a different computer. I am currently trying a NEW install of the OS on the i7, but I suspect a hardware/driver interaction problem. I have no hopes until 10.6.4 arrives in a month or so.
    Larry

  • IPhone 4S with IOS 8 will not sync with iTunes on a Mac.

    I can not sync my iPhone 4S with iTunes on my Mac.  Had to delete the music I had to make room for the upgrade to IOS 8 and now I can't put any playlists back on my phone.  What gives?

    Hi zara,
    the thing is we have no option in iTunes to allow it, no check box. Perhaps this is because we're not meeting the system requirements as listed by Apple in this KB article.
    Wi-Fi Syncing requires:
    An iOS device running iOS 5 or later, and a computer running iTunes 10.5 or later on:
    OS X Lion or Snow Leopard (version 10.6.8)
    or
    Windows XP, Windows Vista, or Windows 7
    So it CAN be done with Snow Leopard apparently, but not Leopard (as carmstr27 indicates he/she's using). I'll give it a try once 10.6.8 v1.1 downloads and installs.
    hth

  • When I connect my iPhone to my computer it is not recognized by iTunes.

    I have tried multiple ways to try and fix the problem but nothing is working!!!! Please help!!!!!! I have an iPhone 5 and have windows 8 on my computer.

    What type of computer?
    Mac: Sync Services: Advanced troubleshooting for contact and calendar syncing
    Windows: Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
    The following previous discussion may also help: Re: sync server failed to sync the iphone

  • While updating my Ipod to ios 5 an unexpcted error occured and now my ipod is not recognized by itunes or my computer and all data has been removed. What can I do

    While updating my Ipod to ios 5 an unexpected arror occured before my data was restored and now Itunes will not recognise my Ipod. My Ipod is also not seen as a device in My Computer but asks me to install drivers. What can I do?

    - First I would remove and reinstall all the Apple software using the following and then restoring the ipOd.
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    - Next see if manually placing the iPOd in recovery mode will allow a restore. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    - Next try DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Next try another computer/cable to help determine if you have a computer or iPod problem.
    - If the other computer works and yours does not see:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • HT4623 After updating my software on my iPhone 4s; my phone is not recognized by iTunes and none of the support suggestions have worked.  I am not satisfied with my apple support

    After updating to the latest software, my iPhone 4s and iPad 2 are not recognized by iTunes.  I have attempted all of the suggusted material on Apple support.  I am not satisfied as these items are needed daily.

    Connect the device to the computer.
    Quit iTunes if it launches.
    Click the Start menu, right-click on Computer, and choose Properties.
    In the upper-left corner, click Device Manager. The Device Manager window should open.
    Click the plus icon (or disclosure triangle () for Windows 7) next to Universal Serial Bus controllers to expand this selection.
    Right click on apple mobile device USB Driver and update it to latest version.
    This worked for me..

  • IPod Touch is stuck in "connect to iTunes" screen. It is not recognized by iTunes or by my Windows (64-bit) computer.

    I recently purchased a new laptop after my old one ceased to function. Therefore, I had lost ,my old iTunes, and my iPod is no longer authorized by a functioning computer. I downloaded the latest version of iTunes, plugged my iPod in, and tried to install the new iPod Touch software update. I got the error message that the installation had failed, and iTunes automatically ejected my iPod, leaving it in the "connect to iTunes" screen, in which it has been stuck ever since (about 9 days now). I have uninstalled and re-installed iTunes, have rebooted my computer numerous times, I have tried various holdings of the power button and home button as recommended on several help forums, etc. to no avail. I am using a Windows 7 (64-bit) system on a brand new HP Pavilion dm4 laptop with plenty of space and the newest version of iTunes installed. My iPod Touch (3G) is not being recognized by iTunes or by my laptop. I would like to, if possible, restore my iPod to original factory settings so that it can be authorized on my new laptop and will sync approrpiately. Any help anyone can provide will be immensely appreciated. Thank you.
    Also, the iTunes is the version for a 64-bit Windows OS.

    - First I would remove and reinstall all the Apple software using the following and then restoring the ipOd.
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    - Next see if manually placing the iPOd in recovery mode will allow a restore. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    - Next try DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Next try another computer/cable to help determine if you have a computer or iPod problem.
    - If the other computer works and yours does not see:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • IPod Touch and iPad Not Recognized by iTunes

    When I plug in my iPod Touch and iPad, iTunes does not open, but both devices are recognized by Windows 7. When I open iTunes manually, there is no listing for "Device" at all. I have uninstalled and reinstalled the latest iTunes version several times to no avail. I'd appreciate any advice on what I can do to solve this problem.

    Have your tied the troubleshooting here:
    http://support.apple.com/kb/TS1495
    (iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows)

  • Ipod touch 3g not recognized by itunes

    Hi, I have an ipod touch 3g and i recently updated the latest version of itunes. However, after the update the ipod is not recognized by itunes. Should I uninstall my itunes & reinstall it? Will my data be safe if i do so?
    Regards,
    Vinod

    Yes. Also see the following.  I would first remove and reinstall all the Apple software using the instructions in the link.
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    Your media should not be affected.  However, you should always have a backup of your media since glitches do happen.

  • Ipod touch is not recognized by itunes

    Why is my ipod touch is not recognized by itunes? I have tried everything that the troubleshooting guide says and nothing works.  Anyone have any other suggestions?

    Just what have you tried.  There are many Apple articles on the subject and it easy to miss one or more. Did it work before?  Did you do anything to the computer since it last worked?  oDoes the iPod work OK?  Have you tried:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iPod: Does not appear in Windows or iTunes and Device Manager is empty

  • IPod touch 2g not recognized by iTunes

    I already tried the trouble shooting assistant. im not sure why it wont connect to my computer...

    If you tried everything here, I would try another computer to help deterimine if it is a computer or iPod problem.  You have tried another cabe?
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • My 4th gen ipod touch is not recognized by itunes

    when i connect my ipod to my computer, the computer recognize the ipod but when i open itunes it doesnt recognize the ipod, i'd try everything and anything works.

    Have you tried here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    iPod: Appears in Windows but not in iTunes
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • IPOD Touch not recognized in ITunes

    I have a new Acer laptop with windows 7.  My IPOD Touch is not recognized by itunes but is recognized as a device on Windows.  My IPAD is recognized, and the Ipod works on my husbands MAC. I have tried everything including re-installing Itunes twice. Help

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • TS3716 mi iPod is not recognized by itunes. I keep getting" do not diconnect " and a battery icon. Using windows 7

    My ipod nano cannot be reinstalled by itunes. I get "do not dissconect" and a battery icon. using windows 7. Any suggestions ?

    - First I would remove and reinstall all the Apple software using the following and then restoring the ipOd.
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    - Next see if manually placing the iPOd in recovery mode will allow a restore. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    - Next try DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Next try another computer/cable to help determine if you have a computer or iPod problem.
    - If the other computer works and yours does not see:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Maybe you are looking for

  • Please provide the abap code for this requirement

    note : if the below mentioned user exit is not suitable please find the suitable user exit and provide the code for this requirement. •     The User-exit MEFLD004 is only to be used at PO level (ME21N/ME22N). •     When PO is create or changed (ekko-

  • Reg: Interview Question

    Hi all I have an interview on below topics pls calrify 1. Project objective is to propose new SD pricing condition (it will hit CO Module), 2. carry out blueprint workshop discussion, 3. Configuration on CO module, 4. Prepare unit test scripts & carr

  • Sony support not working

    Hello, I am trying to contact Sony by submitting their form (http://support.sonymobile.com/global-en/xperiaz3/contactUs/phone/?region=he_IL) but the "Send" button just does nothing! I enter all the required fields, the button becomes blue and clickab

  • Calculate % of answers across all records in a list

    I have a list that gathers information from users. I want to calculate the percentage of a given answer across all records. To keep things simple, consider the following example. A list called "Shirts" contains 3 choice fields: 1) Color: with choice

  • Undefined task appearing in the workflow

    Hi Experts, I am facing a strange issue in the production system. There is a workflow which is resulting in error. When I checked the workflow log, I can see a task which is not defined in the workflow at all. Then the error that is mentioned in the