Iphone 4 will not charge from wall or computer ?help

HI
I noticed my phone had a low battery. Once i got home the phone was dead. Tried charging as usual using the apple leads to the wall - but nothing comes up on the screen - no 'charging symbol' instead the phone remains dead. Any ideas?

Check the bottom of the iPhone and make sure there is no lint or debris on the connector that the power/sync cord attaches to.  Also with a very low battery, you may have to let the iPhone charge several minutes before you get any indications. If none of the above solves the problem, try another cable.  You might also want to try a car charger if you've got one.

Similar Messages

  • IPhone will not charge from wall socket only from Laptop or Computer!

    Just wondering if anyone else has had this problem?
    My IPhone will charge sometimes and sometime it wont:
    I mean like sometimes it will charge from the wall socket and sometimes it wont!
    It will go so far as to turn off because of no battery life! Then I plug it in to the Laptop and it starts charging!

    I have had this problem for some time. It applies to both a wall charger (the one that came with iPhone and a third-party model) and a car charger (third party). Both wall and car chargers are rated at 1000 ma which should be enough power. Yet when the battery charge goes below a certain level the phone will not charge from wall or car charger, but it will charge from a computer.
    I did some research on USB power. Per specification, a USB client (the iPhone) cannot draw more than 100 ma from the USB host (charger or computer or hub) unless it asks for and gets permission to draw more current. (This is so it does not interfere with other USB devices connected to the host.)
    Inexpensive wall chargers do not contain any computing elements. They short the D+ and D- lines together. This makes it impossible for a client to negotiate a higher current draw, so the iPhone, working per the USB standard, limits itself to 100 ma. When connected to a computing device such as a computer or USB hub, the iPhone can negotiate a higher current, up to the 500 ma currently allowed by the USB standard.
    This begs the question, why can't the iPhone charge on 100 ma when the battery is almost completely discharged? After all, when the battery has more charge, the iPhone will charge nicely from a wall charger. Perhaps someone has some insight into this aspect.
    There is evidently a new USB standard for wall chargers that will fix this issue. Both the host and client must implement in order for it to work. (I haven't read the standard, but suspect it involves the client detecting that the D+ and D- lines are shorted together.) Obviously, either the charger or my iPhone 3G don't comply with this new standard. Maybe the iPhone 3GS does? Or maybe we have to wait for another iPhone model that has the hardware that complies with the new USB wall charger standard.
    Meanwhile I have to be careful not to fully discharge my iPhone battery when I am away from a computer. I recently went on a 30-day trip and had no problem because I charged the phone every night. Of course, I did not use it much because it was an international trip and AT&T roaming rates are horribly expensive.

  • IPhone 4 will not charge from wall... help!

    I've had my iPhone 4 for going on two years and never had any major issues with it. As of the last couple days, I'm having a major problem charging my phone. In the beginning, it wouldn't charge from the wall or via USB on my laptop. However, it would charge via USB when plugged into a regular windows PC. Really strange if you ask me.
    After browing through some similar questions already asked on here, I found a solution for the laptop problem. I was able to update a driver in the device manager and am now able to charge via my laptop and also connect so that I can sync my phone, etc.
    It still won't charge with the regular wall charger! Which uses the same USB cord that I'm using in my computer.
    Originially, I had 2 wall chargers that I've had forever and when neither one of them were working the other day, I thought they were faulty so I went out and bought a new charger. It worked! I thought I was home free. Wrong. It worked for 1 afternoon and then it stopped working again (but it's the same one that I'm now using in my laptop)... so it only doesn't work when plugged into the wall.
    I've tried multiple power blocks, multiple USB cords, multiple wall outlets.
    No idea what the issue is!
    I also tried a hard reset (power/home button) on my phone, it didn't do anything.
    Also, all of my software is up to date (iOS 6.1.3).
    I might just suck it up and head to Apple/Verizon tomorrow and see if they can figure it out, but in the meantime, does anyone have any ideas?!
    Thanks!

    Check the bottom of the iPhone and make sure there is no lint or debris on the connector that the power/sync cord attaches to.  Also with a very low battery, you may have to let the iPhone charge several minutes before you get any indications. If none of the above solves the problem, try another cable.  You might also want to try a car charger if you've got one.

  • New iPad 3 will not charge from a mac. need help on that

    my new ipad 3 will not charge from a mac. need help why if any one knows? thk

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
     Cheers, Tom

  • Iphone 4s will not charge from wall charger, only from computer usb

    Well My iphone 4s has starting acting up. The phone will not charge from any of the apple wall chargers I have. I have also tried various apple cables. The phone will charge from my Macbook Pro's usb port.
    I have also did various restores to the phones software/phone, it is running ios 7.0.6
    Any help would be great I was trying to hold out for the iphone 6, and don't really want the 5s......

    Hi there 97t-bird,
    You may find the troubleshooting steps in the article below helpful.
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/ht1476
    -Griff W. 

  • IPhone's 4S & 5 will not charge from wall charger

    Similarly to everyone else, I have updated my iPhone 5 & also 4S to IOS 6.1.3.
    The batteries in both phones are draining very fast just as a lot of other people are commenting on, but also both phones will not charge from various devices that do work.
    I have 2 cables that both work in the car an on my PC, neither now work when connected to a GPO.
    This started straight after the phones were updated.
    Thoughts; advice please.

    i did the basic stuff OF COURSE .... but i am NOT willing to go through the pain of restoring my phone just because Apple screwed up another IOS update ..... i am really getting sick of thiose half-baked updates that break more things than fix ....

  • After using Energie On The Go BB will not charge from wall

    My BB was out of power and I bought an Energizer Energie on the go to charge my BB and it worked fine. But since then the BB will not charge from the wall. I bought a new batery and same story. the plug con comes on when first plugged to the wall charger bt goes out in 3 sec. What's the deal? How can Fix? have tried removing battery and reseting several times but no luck.

    I guess it's possible that the charger block is faulty, and maybe you had a power surge that knocked them out, perhaps the cables are good which is why they charge with USB port on computer of in a car but the block the USB cable plugs into is bad thus when using a wall outlet it doesn't charge... Have you had to reset the GFCI for any outlets in your home??

  • IPhone will not charge when plugged into computer

    My phone was not working, and so I took it to the apple store nearby. Here were the problems:
    -error message saying "this device not made to work with iPhone"
    -would not charge when plugged into computer OR wall charger
    -person on other end of phone calls said i sounded really far away and had trouble hearing me
    -when i shut it off, it restarts itself immediately
    -cant do a manual reset holding the power and center buttons at same time
    -when plugged into the computer, mouse freezes, and a message appears saying ""power surge on hub port A usb device has exceeded the power limits of its hub port."
    At the genuis bar they told me they cant help me cause that little water damage indicator inside the headphone hole is pink instead of white! I have never ever ever ever ever EVER gotten my phone directly wet. The only thing i could think of was the humidity in the bathroom when I'm taking a shower, and using the timer to use hair remover on my legs lol. But i think this is totally unfair, they wont repair my phone, or even really look at it because of this supposed water damage. My phone has worked fine up to this point, and the thing that happened that started all of this is when i dropped it about a foot off the ground in a DRY parking lot.
    Is there any way they will replace my iphone at no charge?

    Well don't give up try again maybe your luck will change when you go back up there,let somebody else look at your phone not the same person that told you that.I would get a second and a 3rd option about my phone.When you go back don't even tell them what somebody already told you up there ones.
    And after the 3rd time I'll ask them well can they send your phone off to be fixed,It might not be nothing wrong with your phone it might be just they eyes playing tricks on them.Cause I promise you I know my phone had gotten some water in it cause I was sitting on the porch one day me and about 6 other people one of my cousin came out and through a bucket of water at my brother and I was sitting right on the side of him.And when I say my phone look like I than gave it a bath witch when they did that I had already had call the Apple store and told them something was wrong with my phone.And they had gave me appt to come up there,so I went to the Apple store I wanted say two day's latter after I made the appt to let them see my phone but my cousin and brother was playing with that water the day before I had to go so I guess that's why I was mad cause I was going to get other phone the next day after apple look at my old phone.So even with all that they still gave me other phone and I don't see how I didn't have no water in my phone cause of how much water they had through on my phone.
    I guess I was luck cause if they would have told me that I would have freaked out so badly.And the reason why cause I wouldn't had my phone for five days and for them to tell me they couldn't do something oh yea they would have done something cause I would have went to jail that day for tearing up something in the store that worth my 400 and something dollars I spent on my phone and it would have bent one of them computer that would have bent history.
    But I'M telling you,you going to be okay don't give up.Make you other appt and see what they say.

  • 5G will not charge from wall adapter

    My new 15 gig 5G will not charge from a 5 volt wall adapter.It charges fine on the USB port on my computers.
    So I decided to take a USB extension and cut it an place a current meter in series with the 5 Volt on the USB line.What I found is that it will draw ~500ma with the data lines connected in the cable(in other words a normal cable). Now if I disconnect the data wires so that I am only connecting the 5 volts from the USB port it will draw ~100 ma for a second and then draw no current.It appears that some kind of handshaking is required. Is this normal?
    As it is now I will not be able to ever charge it from a 5 volt supply.Do they do something to the data lines on wall adapters?

    Well I finally got my "dumb" USB charger (a Belkin F8Z009 Power pack) to work with my iPod 5G 30GB. To wake up the 5G needs to see 2.5 volts on it's data lines. The easiest way to do this is with a voltage divider made with two equal resistors. Like this:
    As a poof of concept I made the device below with four 30K resistors but anything from 10K to 50K should work fine.
    A more compact wake up cable could be made by cutting into a standard USB male-female extension cable and soldering in four resistors like this:
    Of course if your building your own or can get your "dumb" USB charger open then the resistor voltage dividers can go inside.
    Dell Latitude   Windows XP Pro   iPod 5G

  • HT1414 my ipad mini will not charge from wall socket and it will not show itself on i tunes via my pc... i have also substituted my power charger from my i-phone to no avail.

    my daughter's i-pad mini will not charge up from the wall socket and it will not show itself on i-tunes via my pc... i substituted the power charger from my i-phone to no avail with the wall socket... seems like i read that the earlier i-pads have some problems with the lightning socket but can not remember exactly...there is no apple retail shop in the small city where i live but would travel to one if the fix is relatively quick or easy...otherwise, what can i do for diagnosis and repair?

    Most likely your cable is bad and you need to get a replacement.
     Cheers, Tom

  • My Iphone will not charge or turn on. Help.

    My Iphone 3G has suddenly decided to never turn on again. I have had the phone for about five months now, and it is in great condition. The phone died, and it will not charge, and it will not turn on. Nothing happens at all. I have read where people have had problems with their phone turning on and showing a screen with an Apple image on it. This isn't the case with mine.
    Any feedback?

    have you tried resetting it with the on/off button and homescreen button? hold them both down until the apple logo appears. not sure how long you hold them down for, 30 sec maybe.

  • HT1384 iPod Classic will not charge from wall outlet

    My iPod Classic 80G will charge from my computers and my iHome dock, but not from the wall outlet. The cord, outlet, and adapter all work. We know the regular adapter works, it's an Apple universal USB to wall adapter that charges our iPad. We tried other cords (have two), other outlets, and even my kindle 2-prong adapter. Nothing worked. Suggestions?

    Hello there, Anhaja.
    First off, great job in your isolating steps performed already. One step that wasn't mentioned is found in the following Knowledge Base article:
    How to reset iPod
    http://support.apple.com/kb/HT1320
    For your particular model:
    How to reset an iPod with a Click Wheel
    1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
    2. Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 8 seconds. You may need to repeat this step.
    Tip: If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
    If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep. Try resetting the iPod while it is connected to power.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Iphone will not charge via usb-to-computer nor via brick; I've tested with two different cables. Just before this problem arose, I got messages similar to "This accessory is not made to work with iPhone."

    Most of my concern is in the subject line. I probably should've saved some content to include here. Allow me to elaborate:
    While traveling with the tiny brick, I got a message on my 3GS phone that "This accessory is not made to work with iPhone”; however, the charger was working fine with another phone and with an iPad.
    I tested alternatives by removing and re-inserting the cable (obviously, as I tested other devices), changing wall receptacles, shutting the phone off (all the way), all to no avail.
    When I got home, I plugged a different cable--one that was connected to my iMac rather than the brick--into the my 3GS; it still didn't charge.
    So, I'm hypothesizing that perhaps some debris (from a pocket?) got into the charging receptacle of the 3GS and is disrupting the connection. Perhaps there are other hypotheses.
    I am reluctant to do a reset, as (a) the problem doesn't appear to be a software issue (the phone and software are all working, though the charge is declining) and (b) I don't want to lose the contents before I can sync it (now that I'm home, again).
    I'd welcome suggestions. Meanwhile, I suppose I shall e-mail photos and notes from the phone to myself before I lose the remaining charge.

    Try to clean the 30-pin receiver slot either by blowing air into it or using a microfiber cloth. If the problem persists, based on what you've already said, I'd say the problem is most likely hardware, and would need to be replaced or repaired. I hope your iPhone is still under the 1-Year Manufacturer Warranty, or if applicaable extended warranty. You can check by calling AppleCare National iPhone Technical Support at 1 (800) 694-7466.

  • Iphone will not charge from a dead battery

    My Wife found her phone completely drained and now we can't get any response out of the phone
    any suggestions

    Plug it into the Wall Charger for at least an hour...

  • My ipod will not charge from a wall socket but will charge using the same cable if the usb end is plugged into a computer or an airport power source. My iphone and ipad charge fine on the same cable usin ghte same wall plug in the same wall socket?

    My ipod will not charge from a wall socket but will charge using the same cable if the usb end is plugged into a computer or directly into an airport power source. My iphone and ipad charge fine on the same cable using the same wall plug in the same wall socket. This makes no sense but I see that it has been posted as a problem elsewhere. This must be due to some kind of degredation of the Ipod. . It is not fixed by IOS resets as others have noted.
    Has anyone asked Apple directly about this?

    Hi there Apples or Pears,
    I would recommend taking a look at the troubleshooting steps found in the articles below.
    Charging your iPod battery
    http://support.apple.com/kb/ht1384
    iPod's battery doesn't charge
    http://support.apple.com/kb/ta44551
    -Griff W.

Maybe you are looking for

  • Vista 64 bit and Adobe flash

    Does anyone know when adobe flash will be able to work on vista 64 bit without having to change the settings to 32 bit?

  • Customer Master zone Customer Transportation Zone Is Greyed

    Dear Friends                         I want to make customer master transportation zone field to be optional entry.I did necessary  changes in OBD2,OB20 and OVT0.After making optional entry in all area it is been with grey mode that is not editable.B

  • Virtual Provider on top of a Multiprovider

    HI BI Experts, Can we create a Virtual Provider on top of a Multiprovider? Please let us know if some one has come across such a requirement or have done this type of scenario? Many thanks in advance. Regards, Bala

  • No HDMI sound on TV - Pavilion dm4-1160us Entertainment Notebook

    I know there are a lot of post over this issue, but nothing is working for me.  i have a Pavilion dm4-1160us Entertainment Notebook running windows 7 64 bit.  I've uninstalled both the graphics and chip drivers and reinstalled (warning said the ones

  • Setup SCC4 ( logical system)???

    Hi all, I couldn't setup logical system for the test system because the production & test systems use the same client key (for example:100). The logical system for production is setup already and use 100 for the client key. Any suggestion? Thank you