IPhone 4 will not charge using apple charger displays this device not supported for charging
The iphone will connect to iTunes but will not charge with the charger or computer. It has been reset, and that didn't help.
Hey endifrommiami,
Check out the website link on my profile and then navigate to the products section of the site, there are solutions to fixing your specific charging iPhone problem there.
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'
Fonefixer.
Similar Messages
-
I got a hundred dollar charge your Apple ID but I can not use it
I got a hundred dollar charge your Apple ID but I can not use it
Do you mean that you've got an iTunes gift card, and if so why can't you use it ? All iTunes gift cards are country-specific, they can only be redeemed and used in their country of issue - if it's a US gift card then are you in the US with a US billing address on your account ? Or have you managed to redeem it but are having problems buying things ?
-
My iphone 5S is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and updating it to the new software, and backing it up but it keeps saying unknown error 4005, Also when I first tried backing up my phone on my computer it would begin the processes then half way through it would say IPHONE has been disconnected, now it won't recognize it or anything. what can i do? This is a brand new phone!!!
Hello jraff21,
I was able to locate a support article for the error you mentioned. The following steps may help you get your device back to working order:
iOS: Restore errors 4005, 4013, and 4014 - Apple Support
You may see one of these messages if the device unexpectedly disconnects during the update or restore or iTunes couldn't tell the device to go to the restore state.
The iPhone [device name] could not be restored. An unknown error occurred (4005).
The iPhone [device name] could not be restored. An unknown error occurred (4013).
The iPhone [device name] could not be restored. An unknown error occurred (4014).
Try these steps to resolve the issue:
Install the latest version of iTunes.
Restart your computer.
Make sure your computer is up to date. If an update requires a restart, check for updates again after you restart.
Restore using another USB cable.
Learn more about updating OS X.
Learn more about updating Windows.
Restore your device on another computer.
If you continue to see error 4005, 4013, or 4014 when you restore your device,contact Apple for support.
Learn more about other update and restore errors.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
my iphone 5 is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and it won't recognize it or anything. what can i do?
Turn it off by holding home+ power button untill the screen goes black ( as soon as it goes black, release the buttons).. This might take some practice , so dont worry if on the first try your phone reboots and goes to itunes screen again.
Now, with your phone powered off, enter DFU mode:
Method 1)
Attach the phone to the pc
Turn the phone off
Hold power and home together for *exactly* 10 seconds
Release power but keep holding home until the pc beeps as a USB device is recognized.
Whilist in dfu mode, itunes will recognize the device and it will ask you if you wish to restore it. Simply click restore, and the restoring proces will begin.
This will hopefully fix your iphone.
Cheers -
i am using i5,updated to ios 7,problem is after updated to ios7 whenever i conncet my phone for charging, at first notification i am getting is "this accesorries is not supported on this device", but phone is charging, before switched to ios7 it was ok, i am getting this notification each time i am connect my phone for charging, or laptop, why i am getting this?
I am not using extra cable for charging the phone or sync to pc, one cable which came with the phone.it was a full intact box. Which i use for charging my phone and also i am using that cable for sync to my pc, when i was using ios 6.1.4 at that time that notification didnt shown up in my phone,it was ok, when i switched to ios7, i have started getting this notification, my friends are also using i4, i4s, and i5, they are also updated to ios7, but they are not getting the notification which i am getting in my phone after connecting my phone with the cable, so what is the solution? It will be very helpful for me if you give me any plz...
-
My iPhone 4 Bluetooth, using ios7, cannot identify any other bluetooth device (even other apple products). Says device not supported. How to solve this problem?
Supported Bluetooth Profiles
It is not supposed to detect other Apple products via Bluetooth. -
This iphone can not be used because the required software is not installed. Run the itunes installer to remove itunes, then install the 64bit version of itunes
I keep getting the above error everytime I plug in my iphone.
I am not daft, I do have the 64bit version of iTunes installed already. When I installed itunes 10.5 and more recently 10.5.1 I got an error message that rolls back a section of the installation (The updater I think) before finishing off installing iTunes.
After the installation iTunes will work normally apart from when I try to connect a device. At which point I get the title error message and I can not sync my phone.
It's probably down to Itunes not installing properly however no matter what I try I can not sort the problem out. I've tried uninstalling all apple programmes followed by a registry clean, then reinstall. I've tried the same again but in a specific order. I've tried repairing iTunes, repairing the updater etc etc. Nothing seems to work. I'm out of ideas.
Has anybody had this problem? Please can somebody tell me how to fix it!
Getting an iPad this Christmas and if I can't sync that up to my PC I may just have to go over to ANDROID!!!Is there a way to install this on its own?
Yeah, let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunes64Setup.exe installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunes64Setup.exe, and select "Extract to iTunes64Setup". WinRAR will expand the contents of the file into a folder called "iTunes64Setup".
Go into the folder and doubleclick the AppleMobileDeviceSupport64.msi to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport64.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does an iTunes install go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
Pop up menu shows my Apple ID in my iphone as my old email Apple ID. This happens when I try to go into iCloud . It does not show my new apple ID.
Hi jackburkholder,
You will need to delete the iCloud account with your old ID, but before you can do that, you will have to go back into Manage Your Apple ID, and change your Apple ID back to the old address. Don't worry about verifying it, you just need to change it.
Then, go into Settings>iCloud and turn off Find My iPhone (it will ask you for a password - put in your current one to turn it off). Then, scroll down to the bottom of the screen and Delete the iCloud account using your current password.
Also go into Settings>iTunes & App Store, clidk on your old ID and sign out of iTunes.
Then go back to Manage Your Apple ID and put your new Apple ID back in.
Go back to Settings>iCloud and sign on with your new Apple/iCloud/iTunes ID.
Go back into Settings>iTunes & App Store and sign on with your new Apple/iCloud/iTunes ID.
Cheers,
GB -
Used Apple Studio Display, Possibly Ruined
Hello all,
I purchased a used Apple Studio Display a few days ago and thought nothing of it at the time (I was picking up some used Macs for friends, and it was an afterthought). I figured, what the h*ll.
So anyway, I finally hooked it up, and was very impressed with the color calibration and overall usefulness of the monitor. The problem was it was very dirty and covered with scratches.
So, not knowing any better, I proceeded to use some glass cleaner on it, and this got a lot of black residue off the screen, which made things look noticeably cleaner. The bad news was that this was a lot of work, and I was looking for a more "quick and dirty" (poor choice of words, I suppose) method of getting it cleaned up. So I pulled out the "Goo Gone," a commercial product that smells a bit like oranges but which also has some petroleum distillates in it.
Anyway, long story short: Although the window cleaner and the craptastic miracle cleaner did a bang-up job insofar as the removal of the black matter, there are a few areas of the screen where I was a little too vigorous and have buffed the shine away, leaving a blurred image underneath. Who knew that the screen had a protective plastic coating? Not me, I suppose.
So I've googled around for some kits to repair the mistake I have made, and I'm coming up empty. I see multitudinous products for cleaning the monitor, and of course I wish I had found them before I endeavored to clean this monitor (it was disgusting, I tell you! Even with the blurring, it's still an improvement!). I still can't find a product to make this puppy shine like it's supposed to.
There remain a few noticeable scratches on the monitor, and of course I would like to buff those out if possible, but most importantly, I'd like to be able to get back the clarity I thought I was heading for (before I cleaned a little too hard!).
Responses chiding me for my overzealous cleaning behavior are discouraged, as I am primarily interested in climbing out of the hole I'm in, not in getting shoved further down it.
Thanks in advance,
ArtWell, I'm going to go ahead and answer my own question.
I attempted to take apart the monitor to take out the smudged glare screen. I was unsuccessful; it's glued directly to the glass in such a way that its removal would have made things much worse.
When I put it all back together, the monitor no longer worked!
Oh well, easy come, easy go. -
My IPhone 5 will not recognize that I have an Itunes Match account. When I try to turn the Itunes Match button on in settings I get a mesage saying I am not subscribed to ITunes Match. This does not happen with my Ipad. Any Ideas what to do?
SharmFarm wrote:
Good ev Ning Mario49 firstly I would like to say a great thank you for your attention to trying to help me,,,,, i have looked at the links and will try everything stated first thing…
Hi Mario,,,,
I tried everything in your reply,,, thank you again,, I had done that once before and all was working great,,
I have just now tried the Reinstall via iTunes, about 20 into the download, the iTunes logo on the phone disappeared, and the Apple Logo appeared again,,, I waited until the iTunes stated that the download had finished, and the install was in progress,,,
Nothing happened, still the Apple Logo was visual on the screen, iTunes never recognised the phone which it was on my iTunes account previously,,,
Still just a bunch of lines, maybe 5 or 6 so small writing,, I personally can not read what it is telling me, someone said it reads, incorrect shutdown,,,????????
Please advise,???
I am now at a loss,,, I really became excited when I saw the iTunes icon after putting the phone into restore,,,???
Thank you again
D -
Streaming Audio through Iphone 5 to desktop or laptop using bluetooth preinstalled on all devices not working. Help!!!. Does anybody else have this problem?. Or does anybody have a solution to the problem. If So please help me its driving me demented seriously concidering to go to android for that sort of stuff cause of the dame restrictions on apple devices!
iOS devices do not pair with computers, as data transfer over bluetooth is not supported.
Computers are not airplay compatible unless you have downloaded an app to make them so.
User to user forum, so I don't care if you switch to android or any other threats you make. -
Trying to transfer a video clip from iPhone to iPad using transfer app it says device not found, I have used this before wifi is fine and both devices are connected ?
That does not involve iPhoto for the Mac in any way - try the iPad forum
I will request your post be moved
LN -
I was told you could view your app from your Iphone on the TV using Apple TV, such as the AFL football one i have puchased through the App store. Is this true?
Hi - you can do what you want to do with AirPlay from your iPhone - but unfortunately it is not as easy as the people in the Apple store told you - your first problem is that you have a non Apple router - you cannot extend a non Apple router wirelessly with the Express - you can only join the network and connect an ethernet device to it - you can however connect via ethernet and have it create a wireless network of its' own - you can set this up from your iPhone or the XP - but this is a complicated setup and would involve many different discussion areas of this forum - therefore I would suggest that you use your 90 days of support and consult directly with Apple to do this - go to this link - http://www.apple.com/support/contact/
-
Bluetooth is no longer working on iPhone 4s. It used to work very well. Not any more. Have tried reset network settings and all settings, no joy. Never had bluetooth problems before. Have tried connecting to other peripherics nothing works. Can you help? Thank you.
Bluetooth is no longer working on iPhone 4s. It used to work very well. Not any more. Have tried reset network settings and all settings, no joy. Never had bluetooth problems before. Have tried connecting to other peripherics nothing works. Can you help? Thank you.
-
i-tunes could not be used because the original file could not be found.could not locate.this error occurs on most of my songs in my library and will not play even though they are in my i-pod and play with no trouble.can anyone please help?
I was not complete clear.
Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section. If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
But before I would check the folders and see if the songs are really there
In my iTune I have this, and I believe it is the default.
Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music
Maybe you are looking for
-
Install windows 8.1 on gpt on a bios system
Is it possible to install windows 8.1 on a gpt formatted partition on a BIOS or non-EFI system? Where can I locate descriptions for that?
-
Error in search help button at selection-screen
hi all, i have a small issue. i have created a seach help button in selection screen . my code is as bellow. TYPES: BEGIN OF ty_ZSD_SNID, KUNNR TYPE KUNNR, BAREA TYPE WERKS_D, END OF ty_ZSD_SNID. DATA : it_z TYPE STANDARD TABLE OF
-
Display current time in forms6
Hi listers , How can I display the current time at forms runtime ???What i meant to tell is that I want to show the user the current time in this format : HH:MI:SS with the seconds being updated as per clock ..... Any response will be appreciated ...
-
Problems with f4fpackager for videos in H264 codec
Hi, I have been trying to use the f4fpackager for some videos i have encoded in h264 using the following ffmpeg command: ./ffmpeg -i video.mp4 -acodec libmp3lame -ab 96k -r 25 -vcodec libx264 -fpre ./ffpresets/libx264-fast.ffpreset -b 1200000 -s 852x
-
Configure 1131 AP with 2 ssids
Hi all, I have here a couple of APs with c1130-k9w7-mx.124-25d.JA1 loaded as firmware. I want to configure them with 2 SSID: 1 encrypted, 1 public. Each should go to its own vlan, and thus should have a trunk towards the switch. My wireless experienc