Iphone 4 will not turn on. 4014 error comes up when trying to restore in itunes

iphone 4 won't turn on and when hooked up to itunes to restore. error 4014 comes up and phone still won't work

Have you tried a hard reset yet? Try holding the home and the lock button for about 10 seconds and see if the phone restarts itself.

Similar Messages

  • My iPhone will not turn on or do anything. When I plug my iPhone into my computer to restore it it comes up with error 2001 or 21 and I've tried everything. Please help experienced apple users!

    Tittle says all! I need help! The iPhone 5 will not do anything when pluged in. Please help!

    That does happen.  It depends on how hard the server is being hit, as well as the connection speed of your system.  If you are on a windows system, you will want to disable any antivirus or firewall software during the download.

  • Iphone 4 is stuck in recovery mode and gives error code 2001 when trying to restore from itunes...any help?

    Just downloaded the new software from itunes today for my iphone 4.  While talking on the phone while plugged into macbook (charging) my call was dropped and then my phone turned off.  Itunes now says it found my phone and it was in recovery mode and I need to restore it.  When I try to do that I get an error code of (2001) and I am unable to go any further.  any help from anyone please?  Thanks.  Ben

    Thats okay
    Are you using a Mac or PC? The step about ports, it not really relative to your issue (error 2001)
    Apple wrote (in TS1275)
    (2001, 2002, 2005, 2006, 2009, and so on) If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. Learn how to reset the SMC. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue continues, it may be related to conflicting security software.
    So I would try an SMC reset if you are on a Mac. But mainly, try a different USB cable if you have one.

  • HT201210 iPhone 4s will not turn on, a screen shows up telling me to connect to iTunes to restore and update to iOs7, but when I try to restore error 2001 comes up and will not let me restore. I still cannot turn my phone on. None of the troubleshooting t

    iPhone 4s will not turn on, a screen shows up telling me to connect to iTunes to restore and update to iOs7, but when I try to restore error 2001 comes up and will not let me restore. I still cannot turn my phone on. None of the troubleshooting tips work, help??

    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process.
    FollowTroubleshooting security software issues to resolve this issue.
    In rare cases, these errors may be a hardware issue.
    If the errors persist on another computer, the device may need service.

  • HT4528 My IPhone will not turn on, I charged it last night and during a phone call it shut off and will not come back on.

    My IPhone will not turn on, I charged it last night and it had a complete charge and during a phone call it just died and will not come back on.

    Connect iPhone to Wall Charger for 10 minutes, it may turn ON itself. If still nothing, keep on charger and Reset, hold both home and power buttons for about 20 seconds until the iPhone begins to respond.

  • My wife's iphone will not turn on. I have tried the normal resetting procedures but nothing. Any ideas would be much appreciated..

    My wife's iphone will not turn on. I have tried the normal resetting procedures but nothing. Any ideas would be much appreciated..

    iPhone User Guide
    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    Try this First... You will Not Lose Any Data...
    Turn the Phone Off... ( if it isn’t already )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    Turn the Phone On...
    If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first...

  • HT4061 my iphone will not turn on it blacked out and will not turn back on

    my iphone will not turn on what so ever

    Is it still charging? Did you try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting.
    If this does not work,try to connect in recovery mode, explained in this article:
    iOS: Unable to update or restore

  • IPod will not turn on/passcode error. Please read for more info.

    I am trying to fix my friend's iPod Touch 2G 8GB. It will not turn on but I have gotten it to slightly connect to iTunes. This message keeps appearing "iTunes could not connect to the iPod because it is locked with a passcode. You must enter your passcode on the iPod before it can be used with iTunes." However, I cannot enter a passcode because the iPod does not come on.
    I did get the iPod to show up in iTunes once and I restored the iPod, but after it finished restoring I could not get it to show up in iTunes and it still will not turn on. It just keeps giving me the passcode error over and over again.
    The iPod also does not show up in My Computer, nor will it charge/turn on on my Logitech iPod dock or Playstation 3.
    I was wondering what I should do to try and fix this issue and get the iPod back in working order. I'd appreciate any help possible!

    Can't you bypass the passcode if the iPod is connected in recovery mode(DFU Mode)
    Is it ok if the files on the iPod are lost?
    Also, reinstalling the firmware isn't guaranteed to fix this problem, only, it is a good start.

  • My iphone will not turn on after I replaced the battery

    My iphone will not turn on after I replaced the battery, itunes logo comes up, but it will not connect and does not reset! does anyone know what I can do?

    Who replaced the battery, you, Apple or an Authorized Apple Service Provider? If you did it yourself, then you could have done anything to disable it. It also voids any warranty and post-warranty support from Apple and the forum. You are on your own. If Apple or an Authorized Apple Service Provider replaced it, then take it back and have them check it.
    The iPhone does not have a user replaceable battery, or user serviceable parts. It is meant to only be serviced by Apple, or authorized service providers.

  • My iphone will not turn on.... it froze earlier today and now it will not turn on all i get is a black screen with the apple symbol every once in awhile... also it will not connect to my computer so i can reset it to factory settings

    My iphone will not turn on.... it froze earlier today and now it will not turn on all i get is a black screen with the apple symbol every once in awhile... also it will not connect to my computer so i can reset it to factory settings

        Sammyhunter lets get you back in action! Has there been any physical/water damage to the device? Try pressing and holding the home and power button together. Once the Apple symbol appears release both buttons. Keep us posted!
    AshleyS_VZW
    Follow us on Twitter @VZWSupport

  • I just subscribed to imatch while logged in to iTunes on a mac computer that belongs to someone else. (I was logged in to MY iTunes)  my iPhone will not turn on the MATCH function, saying I am no subscribed. I've powered off and on.  can anyone help?

    I just subscribed to imatch while logged in to iTunes on a mac computer that belongs to someone else. (I was logged in to MY iTunes)  my iPhone will not turn on the MATCH function, saying I am no subscribed. I've powered off and on.  can anyone help?

    Hi,
    I am having the same problem. Itunes reports that it's uploaded all the music etc.
    When I turn the match function on, it says "you are not currently subscribed to itunes match".
    I have restarted the phone and coputer, logged in & out several times to no avail.
    Any ideas or suggestions?

  • IPhone will not turn on, charge or connect to a PC

    My iPhone will not turn on, I was installing the iOS update on 4% battery which i've realised is bad and now my phone won't charge, turn on or even connect to a pc, i've tried pressing the two buttons to try fix it but nothing happens the screen remains black, ive tried charging it from a wall and nothing works at all! Is there anything else I can do?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My iphone will not turn on at all even when i do a hard restart. how can i fix this?

    My iphone will not turn on at all. i tried to hard reboot it and still nothing what can i do to fix this?

    Take it to your local Apple Store and have the genius take a look. If it won't respond at all, it sounds like a hardware failure.

  • My iphone will not turn on.  Why?

    My iphone will not turn on.  Why??  Help me please !!

    Assuming that the battery isn't empty (and it can take 10 to 15 minutes of charging before it will respond), then have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.

  • What to do if your iphone will not turn on?

    what to do if my iphone will not turn on?

    charge it, then do a hard reset hold the home button +the power button for 20-30 seconds or intell you see a apple logo, after that it needs to be replaced

Maybe you are looking for

  • Import 2 avi files and combine in 1 dvd

    Hi En experts! I have installed the Encore Cs5 Trial with Win7 64bit. Now i will import 2 avi files (part 1 and part 2 for a video) and combine in sequence and after write a dvd for my tv-dvd player..is possible? Give me please instructions... Thank'

  • WS20000075: work item of 1st release step stays in status In process

    Hi All, I have activated and set up standard flow WS20000075 but the work item of 1st release (PO release strategy with 3 levels) step stays in status In process. The work item for the 2nd and 3rd release step are completed as expected. What could ca

  • ASPECT ratio of AVI files

    I have AVI files shot on a widescreen camcorder as 16:9. They show OK in WMP, but Photoshop Elements 6 Organizer shows then as squashed 4:3, in both thumbnail and when played. This is driving me nuts - is there a solution? I have widescreen Quicktime

  • Production version not found --rep. man.

    Dear all, when i am doing backflush through MFBF in repetitive man. i got below error. Production version not found Message no. RM149 Diagnosis The system cannot find a production version with the data you entered. Procedure Check and correct your en

  • Creating video from images

    I am trying to make video from images here is my program import java.awt.Dimension; import java.awt.Image; import javax.media.*; import javax.media.control.*; import javax.media.protocol.*; import javax.media.protocol.DataSource; import javax.media.d