IPhone 4 will not turn on without being on charge.
Hello, Over the past few days my iPhone 4 has only turned on whilst being attached to the wall charger. I restored it through iTunes earlier, but I am still having the same problem. Has anybody else had this? Or know how to fix it?
As soon as I take the phone off charge, it dies again, even thought it is on 100% battery..
Any information would be greatly appreciated. Thankyou.
Your battery has probably failed. A new one is $79 at an Apple store.
Similar Messages
-
My phone will not turn on despite being fully charged?
My iphone 4s has turned itself off and will not come back on despite being fully charged. I have tried charging it but nothing is coming up on the screen and it didn't make a noise when I put it on charge. Help!
See Here for
Frozen or unresponsive iPhone
Try this First...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
http://support.apple.com/kb/ht1430 -
My iphone 5 will not turn on ....I have held both buttons down at the same for a long time and get nothing ...it is fully charged ....and other suggestions?
The screen on my iPhone 5 (iOS 8.1.3) went dark after unplugging it from the PC. I could still could see a backlight on the screen, but unresponsive. iOS was hung in this state.
I opted to try a reset holding power and home button, which succeeded in turning off the phone.
After that, the screen went completely off. Power button didn't appear to turn on the phone.
Upon plugging back to iTunes, I discovered, even as the screen was pitch black, the phone was actually able to power on, or off if I repeated the reset....I could hear the USB connection chime on the PC every time I powered on or reset. The iOS was in some sort of corrupted state with no screen output.
I couldn't restore to factory settings, as iTunes requires I disable "Find My Phone" on the phone itself, which I couldn't do without screen output. Also tried to put the phone in "Recovery Mode"...didn't work either.
I finally succeeded by:
Logging in via web browser to iCloud, locating the phone with the "Find My Phone" web app, and triggering [Erase]. iCloud reported the phone was successfully erased.
After a minute, the phone rebooted itself and screen output worked again.
I then restored my data and settings from my last backup using iTunes without further issues.
Hope this helps others. -
My iPhone 4 will not turn on and is just displaying the itunes symbol not the apple symbol. How do I fix it? My phone died and I went to plug it in and it just displayed the itunes logo. It will not turn on at all. I plugged it into my computer in an attempt to connect to itunes with hoped of it turning on, yet nothing popped up as if it wasn't registering. Please help!
http://support.apple.com/kb/HT1808
-
my iphone 4 will not turn on but when connected to the pc in itunes it says my device is in recovery mode and when i do SHIFT restore and select my ipsw it extracts then this 3914 error message appears. i normal restore then it this error message appears 1601. and my iphone is in RECOVERY mode. and holding the power button and the home button doesnt do anything my latops just makes a ding sound after 6seconds. My iphone screen is just blank and will not come on and i really need help
Has the iPod been wetted?
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Try on another computer.
Also see:
https://discussions.apple.com/message/12690674#12690674
https://discussions.apple.com/message/13032101#13032101
Last, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My iPhone 4 will not turn on. When I plug it into Itunes it says it is n recovery mode. I try to restore it and the error code code 3194. I have tried all the steps what now?
It is usually given as a communication error between Apple, iTunes (your computer), iPhone. Somewhere they are not communicating, so the iOS you are trying to install cannot be approved by Apple. Trouble shooting steps include, making sure you have Current iTunes installed, make sure your Hosts file of computer is not blocking Apple. Try restoring on another computer.
-
iPhone 4s will not turn on, a screen shows up telling me to connect to iTunes to restore and update to iOs7, but when I try to restore error 2001 comes up and will not let me restore. I still cannot turn my phone on. None of the troubleshooting tips work, help??
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process.
FollowTroubleshooting security software issues to resolve this issue.
In rare cases, these errors may be a hardware issue.
If the errors persist on another computer, the device may need service. -
My Iphone 4 will not turn on all it will do is show the iTunes logo and and arrow point to it with an image of the connector to power cord. Ive tried to turn it off, taken out sim but nothing
Hello there, FrancesCech.
The following iPhone Troubleshooting Assistant should help with what to do with your situation:
Apple - Support - iPhone - Restore Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/restore/
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
My iphone 4s will not turn on, It was working properly and then I noticed the battery was at 1% I then proceeded to charge my phone like normal but nothing happened. The phone was unable to turn back on it's been two hours I already, tried to reset but nothing works. I tried different chargers, my ihome nothing is working.
.
-
My iPhone 5 will not turn on. And when it does, it will only stay on for a short while and then it dies again.
Hi lammyrock,
I want to let you know to be patient as this troubleshooting can take some time depending on many different. First try putting your iPhone into recovery mode and then use iTunes to restore it. To do that, you can that by making sure that your iPhone is turned off, hold the Home button down while it is plugged into iTunes. You should get the graphic on your iPhone to plug it into iTunes and iTunes should prompt you to restore it. Once that is done and if you have a back up in iTunes or in iCloud, then you can put that back on after the restore is complete. Take a look at the article below for more information to help you.
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/en-us/HT201263
Hope this helps,
-Norm G. -
that I can do? my iphone 4 will not turn on, no charge, no nothing .. I try to restore and says that can not be restored because of an error 1611
SEARCH
http://lmgtfy.com/?q=iphone+error+1611 -
my iphone 5 will not turn on. i want to save all my pictures and videos to my laptop but i cannot do it as my iphone will not switch on. how do i get them?
A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure. -
IPhone 4 will not turn on
With the iPhone disconnected from the cable, Press and Hold both the Home Button & Sleep/Wake Button until the Apple Logo appears, then release the buttons.
-
HT1369 my iphone 4 will not turn on apple logo just flashes
my iphone 4 will not turn on apple logo just flashes
Hey laysams64,
I would follow these troubleshooting steps:
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
from: iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Welcome to Apple Support Communities!
All the best,
Delgadoh -
Hi
My iPhone 6 will not turn on. It has been on charge, so has power. When you attempt to switch it on it is stuck on the apple logo. Have tried connecting to iTunes in recovery mode but it's not helping! Any ideas?Hey nicbrennan,
Thanks for the question. Based on what you stated, it seems like the iPhone wont start past the Apple logo. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
iOS: Not responding or does not turn on - Apple Support
Thanks for using Apple Support Communities.
Cheers,
Mario
Maybe you are looking for
-
all of a sudden a few weeks ago i cannot get on firefox. it crashes immediately upon startup every time no matter what and crash reporter arrives. i have researched all the articles and followed their suggestions. i installed the newest version of fi
-
Black screen after KDE update (14.12.1)
A few errors or warning in .xsession.errors (don't know if they're relevant): plasma-desktop(865)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability plasma-desktop(864): Communication problem with "pla
-
Add html in e-mail code in plsql
i wanted to add html text as well as some images in following code of E-mail in PL/sql code is: create or replace PROCEDURE TEST_EMAIL (mailhost IN VARCHAR2 DEFAULT 'smtp.gmail.com', sender VARCHAR2 DEFAULT '[email protected]', recipient IN VARCHAR2
-
Hello every one, If we have images of terabytes then should we go for the DWH solution and why? Some reasons please for points in my report. Regards
-
I want to install two update (Bridge CC and Photoshop CC (2014) But I have a error code message : U43M1D204 I try many times to download these two update but nothing to do...