IPhone 4 will not update with new software

I can't get my iPhone 4 to update with the new software.  I keep getting an error message that says there is a promblem downloading the software and the network connection timed out.  Make sure the network settings are correct and your network connection is active.  I reset my network connection, which did nothing to help.  What next?

try to restore....its the same as update.....i did that and worked prefect........make sure to back up all your files!!!!

Similar Messages

  • HT203216 iPhone will not update with new outlook calendar events after sync

    iPhone 4S will no longer update with new outlook calendar events after sync

    another user had the fix:
    FIXED IT! After a painful and time-consuming couple of months.
    I found the solution on another help forum, and in a nutshell it is this:
    I had set up some Outlook appointments with a reminder set at "0" minutes i.e. to remind me at the time of the event.
    On the iPhone there isn't an option for "0" minutes - instead it says 'at the time of the event' (or something similar)
    When the iphone tried to sync the Outlook items it didn't know what to do, and after several minutes of 'deliberating' (which looked like a very long calendar sync in iTunes) it then just aborted the process without syncing anything on Calendar.
    So I went into calendar list view, and changed any appointment with a reminder set to "0" minutes, and bingo, it all started working again.
    Try it! I hope it works for others too.. (repost of solution provided by Silvermum)

  • IPhone 4 - tried updating with new software and now it's asking me to plug it to iTunes. The problem is that my laptop is dead. Is there anything I can do now? Thank you for help!

    iPhone 4 - tried updating with new software and now it's asking me to plug it to iTunes. The problem is that my laptop is dead. Is there anything I can do now?
    I Don't know if I can turn it of or do I just leave it and take it to service?
    I'd appreciate some advice!

    Same thing happened here ~ tech guy at a local authorized Apple repair store said it had something to do with improper backup from which the restore would be made. Still have a phone that asks to be connected to Itunes but won't do anything else . . . frustrated.

  • My iPhone will not start after new software update. Freeze on apple screen

    I updated the phone software today through the new software update directly from the phone and it will not restart past the apple screen. I have tried a hard restart, no dice.
    wish I had waited.

    Got it back up and working by putting in recovery mode and restoring through itunes, but lost lots of settings and app. info. I took about 4 efforts to resync after restore, not sure why, certainly not smooth or intuitive. 2 hours of my life I wish I had back.

  • I have tried several times to update my iphone 4 with verizon but it will not update the new software

    I have tried several times to install the updates to my iphone 4 with verizon but has been unsuccessful.

    What happened when you tried?
    Error message?
    What did it say?

  • My iPhone will not sync with new computer... old computer stolen!!

    I have a new 27" iMac and when I try to sync through iTunes it only prompts..'I will lose all data if I sync with current folder'
    Has Apple not thought about the fact if someone has a computer stolen they are unable to transfer old data to the new
    computer? This is frustrating... any help and direction would be great! Thanks in advance.

    The demo restrictions are shown here: http://www.wideanglesoftware.com/touchcopy/download.php

  • TS3988 my iphone will not update to the new email and password

    my iphone will not update with the new email and password

    Is your phone signed into an old iCloud ID of yours in Settings>iCloud?

  • I have recently updated my iTunes to the latest software. Since then my iphone will not sync with the computer, it doesn't show up in my computer any more. The computer makes the bing sound as I plug in but i am unable to sync, how can I fix this problem?

    I have recently updated my iTunes to the latest software. Since then my iphone will not sync with itunes, it doesn't show up in my computer any more either. The computer makes the bing sound as I plug in but i am unable to sync, how can I fix this problem?

    http://support.apple.com/kb/TS1538

  • My ipod 5.1.1 (9B206) will not sync with new Itunes version 12.0.1.26. Can anyone help

    My ipod touch 3rd generation OS  5.1.1 (9B206) will not sync with new Itunes version 12.0.1.26. Can anyone help

    What exactly happens when you try to sync?
    Does iTunes see the iPod?
    Was the iPod previous synced to another iTunes library/computer?
    Have you successfully synced from this iTunes library/computer before?
    If so have you done anything like update iTunes on the computer since it last successfully synced?
    Do the songs play in iTunes?          
    Does any media now sync to the iPod?
    Do you have the right boxes checked to sync?
    iTunes: Syncing media content to iOS devices and iPod       
    Try syncing using the manual method                
    Managing content manually on iPhone, iPad, and iPod
    If iTunes does not see the iPod:
    iOS: Device not recognized in iTunes for Mac OS X
    Or
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or                     
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • HT201401 My iphone will NOT unlock with my CORRECT passcode.

    My iphone will NOT unlock with my CORRECT passcode.  I can't even backup and restore on itunes because it's locked.  What can I do?  Does anyone have experience with this and know how to fix it?

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
    A Complete Guide to Recover Your iDevice if You Forget Your Passcode
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • My iPhone will not update to iOS

    Hi,
    My iPhone will not updat eto iOS 6.
    It will update for about 5 minutes and then it says it cannot update.
    it is really frustrating because I am excited to see whats new.
    It is on a power source.
    Anyone can give suggestions?
    Thanks.

    Did you check your security software settings, to make sure, that iTunes can contact Apple servers?
    iTunes for Windows: Troubleshooting security software issues

  • HT1386 iphone will not sync with itunes the apple sign just keeps popping up

    iphone will not sync with itunes or ture on only with it on a charger but will only keep popping up the apple sign or on acation show iso6 on screen and say sync with conputer but as soon as i take it off yhe charger it wont do anything

    I followed the instructions in those 2 articles. Still not able to see the device in ITunes. I reinstalled the latest iTunes and all updates to my iMac (Mac OSX ver 10.6.8). I tried 3 different USB Cables in different USB ports. Rebooting both the Iphone and IMac. Still nothing seems to be working. I searched the discussion boards and I see other people with the same problem but they seem to run into the same problems finding a solution. I dont understand what happened because this was working properly up until 2 days ago. Do you have any more suggestions?

  • HT1918 My iPhone will not accept my new credit card info

    My iPhone will not accept my new credit card

    By 'not accept' you mean ... ? If you are getting an error message then if you post what the message says then somebody on here might be able to try and help.
    For a card to be accepted it needs to be registered to exactly the same name and address (including format and spacing etc) that you have on your iTunes account, and to have been issued by a bank in the country where you and your iTunes account are. If your card is, and if it's being declined, then you could check with the card issuer to see if it's them that are declining it, and if not then try contacting iTunes support and see if they know why it's being declined : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management

  • HT1338 Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Sorry for being unclear.
    When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list).  I will already be logged in with the Apple ID I use for everything (my dev account).  I will be able to update all of the other various applications needing updating except for my Final Cut Pro.  When I click the update button next to the FCP update, it will give me an error saying  "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
    I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite.  FCP was working fine until the upgrade.  Is there anything that can be done to fix this?

  • Iphone will not synch with itunes after downloading most recent itunes version

    I updated to most recent version of itunes and since then my 3GS iphone will not synch with itunes. the phone is recognized by my windows computer but not recognized within itunes. I redownloaded itunes and Q but nothing.  Can anyone help?

    I have a Dell XPS 8500 with a 64bit i5 Processor and an Apple 4s and I have the same problem.  I have been searching for days and can only get the phone recoginzed by disabling power to USB ports and there is no way I can get ITunes to show devices, so I can't see the IPhone.  People say Apple monitors these sites but I haven't seen any response from a technical person. Have you?  My hunch is they know about the problem but don't have a fix, and have other priorities for their team. If my hunch is correct, its quite extraordinay because I am close to selling my 4s and getting some phone which is easier to work with. Time is my scarcest resource and I have devoted way too much of it to this issue.

Maybe you are looking for

  • Report header in FR studio

    Hi , I want to pass the user selection of "period" and "year" into report header in the FR studio. I am thinking to use the test box and insert function.In the function if I use membername, I get the error message as invalid argument. Can you please

  • Camera raw for Sony A7

    I havw Adobe Photoshop Elements 10 and need update camera raw for Sony A7? Where can I find it?

  • Confusions in Automatic scheduling

    well while reading i found few things 1. job_queue_processes 2. max_job_slaves_processes both of them sets the value for max number of job slaves processes how they are different and how do we know which one to use and when? another thing is...... wh

  • The Great Shift-Space bug in OBIEE  (Second Post)

    I have posted this before but no one was answered the following issue. Please respond. Very interesting OBIEE (Oracle Business Intelligence Enterprise Edition) Bug. This might happen to you may be one out of 1,000,000. Read full from http://musnet.bl

  • Can't read registry entry AppPath... - My solution

    Good news! For me, there was a simple solution when I got this error message. (Some background: We just upgraded Office to 2007 and RoboHelp 8 from RoboHelp 5.) Today when I tried to open RoboHelp for Word (version 8) for the first time, I received t