IPhone 4 Wireless *HELP*
Some odd reason this started this morning and I thought maybe someone in here could help. Recently...my wireless connection isn't coming on when I have a phone reception status of: _ _ _ _ _ AT&T E in the upper right hand corner. Usually it would say that but in place of the (E) it would have the wireless symbol. I have went into the settings/general and reset my network setting but that still isn't working. Anyone have any idea or experiencing this problem as well???
I would change the router encryption if I could....the router is thru work. So I can't change the settings. I tried turning off the 3g and that doesn't work. Tried renewing my lease. Still doesn't work. Not sure why this just started.
Similar Messages
-
I just updated itunes and started to update my phone to iSo5 when wireless connection was lost on my laptop, I can't get it back and it says there are no networks available-router is working fine, am using it on my iPhone now. Help!
Reboot your router. You by chance dont have a netgear N300 WNR2000 router do you? I had one of those and would lose wifi on it constantly, Switched to a Cisco wifi router and it works much better.
-
I was updating my iphone 4 wirelessly to ios7.0.2 ,after downloading the software it stated to install but i never got started again. only apple logo is appearing on the screen ....please help me out ..thanks
Hello taranpahara,
The following article provides steps that can be quite helpful in getting your iPhone updated.
iOS: Troubleshooting update and restore issues
http://support.apple.com/kb/TS1275
Cheers,
Allen -
Since I download the app «Rio de Janeiro Map» on my iPhone by wireless, I m not able to download it on iTunes. It give me a very slow connection (less then 5bits /sec) with an average of 72 hours to download. How can I fix this. iTunes 10.5, iP 4.3.5. When I ty to cancel it, I m not able to do it. Any help please, cause it bloke my synce and froze iTune.
TxiPhone was hacked/jailbroken and through updating iPhone, it is locked back to the original carrier. Give your iPhone back, it is useless for you.
-
My Macbook Air does not pick up wifi from Airport but iMac, iPad and iPhone do. Help please.
My Macbook Air does not pick up wifi from Airport but iMac, iPad and iPhone do. Help please.
Are you testing in the same room as the TC?
Power cycle the TC.. does it show up now?
Has it ever showed up .. ie is this a problem that just started from an existing setup, or has never worked?
Is the TC new? If old how old?
If you continue to have issues.. setup the TC from iMac and preferably using ethernet.
Change the wireless names to SMB compatible ones, short no spaces, pure alphanumeric.
Use WPA2 Personal security only.
Then set the wireless channels manually.. try 11, 6, 1 for 2.4ghz and try 36 or 40 at 5ghz.
Tell us how that goes. -
Airport, Airport Express, iPhone & PS3 wireless network will this work?
Hi I need help with the above,
I've got an iMac 15" G4 800Mhz, it is fitted with a standard airport card, the G4 is connected to the internet via ethernet to a Zyxel P-600 Series ADSL modem. I have also been streaming itunes (using airtunes) to a seperate hi-fi amp in another room using an Airport Express Base Station, THIS ALL WORKS.
I have since bought an iPhone and a Playstaion3 (PS3) and want this all to work together but does not. It would seem that the Airport Express Base Station is the dominant part of this network and I want to change this priority. No matter how far I delve I cannot find the answer. Basically I want the following setup:
iMac G4 (with Airport Card) that is connected to the internet via ethernet to be the 'main Base Station' (not the Airport Express as is currently), I then want to continue streaming Airtunes to the Airport Express and also use this device as a booster for the wireless network. The reason for the new wireless setup is to enable the iPhone to connect to the Internet (the iphone currently sees the network but cannot connect to the internet because the Airport Express is NOT connected to the ADSL Modem), I also want the PS3 to connect to this network.
Am I asking too much of the Airport Card (The one in the G4)? or should I simply buy the new Airport Extreme Base Station and start again?
Any help would really be appreciated, Paulsorry if i sound stupid but does that mean that if i'm using the AX to stream music (using Airtunes) I cannot simultaneously use it as a wi-fi extender?
That situation is possible.
If so can I set up the AX to just stream music and then use an Airport Extreme Base Station hard wired to the ADSL Modem and the iMAc and connect the iPhone and PS3 to the internet via the AEBS wi-fi network. Essentially creating one wi-fi network for iPhone/ PS3 wireless connection and a seperate Airtunes network for wireless music streaming, or am I just dreaming, cheers for your help.
Sure you can do that. But then you will have to decide if you want to stream music OR you want to be on the internet. Your computers can't connect to both at the same time.
You probably want to do the above, but configure your AX to join the wireless network provided by the AEBS. Then you will only have a single wireless network and you can stream music, print, and surf the internet all at the same time. -
Hi my airport router ( ateast i think this is where the problem originates) has been turning off intermittenly for the past week, when it does this NO devices recieve internet connection, mac, pc,iphone, ipad, wireless or hardwired directly to the router. However they all show to be connected with their corresponding bars and the ip's are all fine. Earlier today it started flucuating on and off about every 5 min making work impossible and now it seems to be completely broken (im currently on my iphone connected though its own internet) Does anyone know how or ehy this happened and how i can fix this? And to know if this originates from the router or something else entirely. Thank you!
Hi - some clarifications would help narrow down some symptoms - just what has been turning off? - has the light been solid green but the modem isn't providing wi-fi? - or is the light flashing yellow with no internet? - which can mean several things - does the light go out completey? - so if you can report on exactly what is happenening and when, maybe someone can help you - we also need to know if there any error messages along the way - we also need the types of devices involved and how they are attached - kind of like a nework map - the more info that you provide, the more answers you will get.
Regards,
Charlie - -
i am located in india, using reliance gsm network on my iphone 4, however i was unable to activate facetime on my iphone 4. please help
Is reliance a supported carrier for the iPhone? If not, you will be unable to get facetime to activate.
-
My iphone 5 doesn't sync with itunes on my pc. it says this computer has previously been synced to another io6 device or iphone? please help what to do?
The error message you're seeing is likely the other way around -- i.e. something like "This iPhone has previously been synced with a different computer". There's no problem syncing multiple iOS devices to the same computer.
However, the reverse is not true for the iPhone -- you cannot connect an iPhone to another computer without it being erased, even if you manually manage music and video. So, it sounds like you've been syncing your iPhone to a different computer?
Also, 5.1 (not 5.0.1) is the latest iOS. -
I am trying to setup iCloud account and when I login I see a popup. The Maximum number of free accounts have been activated on this iPhone. Pls, help me fix it. What other accounts? Thanks
Then you'll have to use another iOS device or Mac running OS X Lion or higher to create a new account for you to use on your phone. If you don't have one, perhaps a friend would allow you to create and account on their device (note: this will use one of their three maximum accounts). To do this, they would need to go to Settings>iCloud, tap Delete Account (which will delete the account from their device but not from iCloud), then allow you to sign back in with your ID to create the new account. Then tap Delete Account to delete the new account from their device, and finally, sign back in with their iCloud ID to restore their iCloud account to their device. Then you can sign in with your ID on your phone in Settings>iCloud and use the new account.
-
I am trying to change my apple id Country. but it says " you have a store credit balance, you must spend your balance before you can change it." i don't wanna spend it to change my country. by the way i can't update any of iPhone apps. need help
It's strange because I can change my AppleID country without this message.
So what to do? Just try to do this again, but on another device. You may also erase cookies and history of your browser.
I hope it will be helpful, good luck! -
I purchased an audiobook in Nov 2012 using iPhone 4S and then upgraded to iPhone 5 in Dec. Now I am not seeing the audio book in purchase history in iTunes. This means I am not able to get the book in my new iPhone. Please help.
Audiobooks are currently a one-time only download from the store. If you don't have it on your computer (audiobooks go into the Books part of your iTunes library) nor on a backup, then if it's still in the store you can try contacting iTunes support and see if they will grant you a re-download : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
-
Hello, i'm Gabriele. I'm from Italy, i'm 16 years old. One month ago, i have updated my iPhone 4 to iOS 7...why i did it??? UNUSABLE ( also with "reduce speed" in preference) but nothing...How can i donwgrade my iPhone 4 to whichever iOS 6? i can't afford to buy another iPhone...help me please...I am willing to do anything. Apple 4Ever. Peace. Steve Jobs RIP.
Sorry downgrading isn't supported by apple.
You can try settings - general - reset - reset network settings.
take a look at this link http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/ -
Is there any way to watch a downloaded TV show from iTunes on my iPad without wifi? I have an iPhone if this helps.
If the TV Show is downloaded on your iPad, you don't need Wi-Fi to watch it.
-
I copied all my CD's onto a hard drive. Can I transfer each CD from the hard drive to my iPhone either wirelessly or by direct connection? Do I have to make a playlist for each cd and then transfer it to my iPhone?
When you buy your new iMac you will be able to have the installation process transfer all your applications, data (including music, pictures, documents, etc) and settings to your new computer. In the past that was done via Firewire. I'm not entirely sure of the process with the new iMacs that don't have firewire. I think it can be done via ethernet and probably via tha thunderbolt cord using a firewire adapter but you'll want to check that out.
With the your new computer properly connected to your old computer, the initial booting of the new computer will include the ability to move everything over.
If for some reason you don't want to do that (smart if you have some horrible software issue that is causing problems) you can connect your old computer to the new one and start it in Target Disk mode where it will be seen as a hard drive. You can then manually copy over all your music and import that into iTunes (and any other data you want).
Somebody here will surely point you to directions for connecting an older iMac with no Thunderbolt to a newer iMac with no Firewire.
Maybe you are looking for
-
ITunes crashes every time I try to open it on my brand new 5s.
iTunes crashes every time I go to open it on my brand new 5s. What do I do?
-
Hi All, How can I make available attributes of other objects in mail form templates. example: billing details, payment details etc. Thanks, Raj.
-
How to test ajax parent container ?
Hi all Spryer, I have a main page with many different categories and the page use the Spry.Utils.updateContent to refresh a main DIV container where i display some HTML content. Till here, no pb but.. I would like to find how to make a redirection to
-
Bind PL/SQL array to PHP array
Hi all! I try to bind a PL/SQL array (nested tables, index by integer) returned by a PL/SQL-function to an PHP array. Here is the code: create or replace package MyPackage as TYPE my_type IS TABLE OF VARCHAR2(1024); FUNCTION MyFunction RETURN my_type
-
Oracle Portal environment comes to halt/crawl
We've got an Oracle Portal environment that will periodically crash (load excessivly slow, almost not loading at all, sometimes pages err out), and we're not entirely sure of the cause. When we experence the issues, the memory seems fine, the process