IPhone 4 with IOS 6 did not detecting the public wi-fi network but able to connect with my home wireless

iphone 4 after install the iOS 6 wi-fi networks are not detecting on public spot but working on home network.What is the reason for this/ any settings?

Is the firmware in the router up to date?
See here for the latest for v2.2: http://homesupport.cisco.com/en-us/support/routers/WRT54G
Note: All these ideas are a bit lame since you say that some iPhone 5s are connecting OK and they running the same iOS level 6.1 and, i think, have the same Broadcom WiFi chip BCM4334.
All devices are running iOS 6.1 right not 6.0.1, or 6.0.2?
You might want to try your iPad mini on some other WiFi networks to see how it fares there.

Similar Messages

  • HT4236 I successfully synched photos from my mac book iphoto to my new iphone 5 (icloud did not do the job).  Now these photos appear on my phone in three places--iphoto, last import and photo library.  Does that mean that they take up three times the mem

    I successfully synched photos from my mac book iphoto to my new iphone 5 (icloud did not do the job).  Now these photos appear on my phone in three places--iphoto app, last import, and photo library.  Does that mean that they take up three times the memory?  Will that affect iCloud?  Sorry for the end-user questions!!

    HHi, thank you for the reply. I have checked my iPad and iPhone and neither has iCloud Photo Library (Beta) enabled. Turned off in both. Photostream is turned on.
    i tried to sort it out  by dragging all the photos to Events on the Mac and then deleting them from iCloud - (left hand side of iPhoto under the section 'Shared'). the photos now show up in Events. I did force quit but the issue remains. The message reads ' photos are bing imported to the library. Please wait for import to complete.'
    i can't empty iPhoto trash either. The message read "Delete error. Please wait for import to complete.'
    WHen I was moving the photos to the Events I always had a message about duplicates - to the effect that the photos already existed, did I want to import them? I clicked on Yes, import all duplicates. But when it showed the images - duplicates side by side - one showed the photo and the other was blank.
    I really don't know what to do! And I don't know how to handle my iOS devices. Is it to do with the large number of photos? Any help, advice appreciated.

  • "Setup did not detect the required components. Setup will exit." !?!?!?

    I have a retail Audigy 2. Autoupdate recognizes my card and gives me the available list of drivers and applications for download. I download the following:
    ) Audigy 2 Drivers
    2) Audio Console
    3) EAX Console
    4) Speaker Settings
    5) Surround Mixer
    The ) Drivers and the 2) Audio console installs just fine. However, for each of the three remaining programs (3, 4, & 5 listed above) upon executing the downloaded file they all give me a pop-up window that says:
    ?Setup did not detect the required components. Setup will exit.
    This happens with all three of them. I want to install these because I am of the understanding that one of these contains the ?Speaker channel test? (for lack of a better word) that will test if my speakers are hooked up correctly to the right channels. The ) drivers, and 2) Audio console do not have that test. I created another post concerning this but nobody has replied:
    http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=39825
    I also tried unzipping the three executable files with WinRAR, and then executing the Setup.exe files but it yields the same results.
    Anyone know why I can't install these applications?!?!?!?!
    I swear, I have never had so many problems with a particular brand of product than I have with Creative products?.yet I keep buying them anyway?.sheesh?.Message Edited by Bridgeboy on -30-2005 05:0 PM

    nanite2000 wrote:
    superidan wrote:
    I have retail Audigy 2 card. tryed removing the card and installing on a differant slot. Nothing Works! it produces the same "no audigy 2 card found - setuip will now exit" Creative sould be ashamed thanks
    Yes, Creative should be ashamed.
    This is a known problem that has been around for months and they have failed to address, just like many other problems with their soundcards. For the solution to this particular problem, look here:
    http://forums.creative.com/creativel....id=3964#M3964
    If you would reread my original post in this thread, that solution did not work for this particular problem of mine. I have a SoundBlaster Li've! Card that this solution worked for, however it does not work of the Audigy 2 card?unzipping the files with WinRar and then running the Setup.exe files produces the same result?setup does not recognize the required components and will close.
    I?m not saying that the person who you quoted should not try it though.

  • I upgraded my iphone os into 5.1 I found out I'm no longer able to connect into my home Wi Fi....please help :(

    I upgraded my iphone os into 5.1 I found out I'm no longer able to connect into my home Wi Fi....please help

    Update router and reboot router.

  • HT4623 I did the ios6 software update on my iphone and it did not complete the udate because it said an error occurred. Then it said I needed to restore my phone and when I try to it wont let me restore my back up because it says there's not enough storag

    I did the ios6 software update on my iphone and it did not complete because it said there was an error. It then gave me a message that I needed to restore my phone. When I tried to restore my backup it says it cannot be completed because there is not enough storage. I cant delete anything to make more storage because my phone is not usable because it wont restore. What do I do?

    Something in your backup may be corrupt. Try wiping it and setting it up as a new device, then sync your apps, data and media back to it from iTunes. DO NOT resotre from your backup. If the problem is contained in the backup, it will bring it right back again if you restore.

  • HT4356 I GOT AN EPSON WP-4533 WHICH HAS AIR PRINT AND PRINTS FROM MY MAC AND MAC BOOK W/O PROBLEMS, BUT WON'T PRINT FROM MY IPHONE.  IT IS NOT ON THE ABOVE LIST OF PRINTERS, BUT BOTH EPSON AND APPLE SAID IT WILL WORK.

    I GOT AN EPSON WP-4533 WHICH HAS AIR PRINT AND PRINTS FROM MY MAC AND MAC BOOK W/O PROBLEMS, BUT WON'T PRINT FROM MY IPHONE.  PROBABLY BECAUSE IT'S NEW IT'S NOT ON THE APPLE LIST OF PRINTERS, BUT BOTH EPSON AND APPLE SAID IT WILL WORK. ANY THOUGHTS

    Some things you can try.
    Startup Issues - Resolve
    Startup Issues - Resolve (2)

  • My iPhone 4s will not connect with my home WiFi network. I have ios6 on my phone. I have updated my IMac and my MacBook Pro with iOS 10.8.2. Anyone have any suggestions? It was connecting with no problems prior to updating my two computers.

    My iPhone 4s will not connect with my home WiFi network. I have ios6 on my iPhone. The connection was working perfectly before I updated my IMac and my MacBook Pro to ios 10.8.2. I have had ios6 since I purchased the phone a couple of months ago. It searches for a network and finds them, but when it asks for my password, it will not accept the password. Have never had this happen before.

    Hello krosebear,
    Thank you for using Apple Support Communities. 
    If you are having difficulties connecting your iPhone to a Wi-Fi network, the following article should provide troubleshooting that should help you resolve the issue. 
    If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
    Regards,
    Jeff D. 

  • I want to download specific music to my IPad so i can access it offline.  Sync with iOS 8is not putting the music or playlists I have chosen on my computer onto my iPad.

    I want to download specific music to my IPad so I can access it off line.  I have iOS 8 on my Mac mini and my pad.  The artists, albums and playlists I have selected to sync on my Mac mini do not show up on my iPad.  I am involved in international volunteer work and have periods where I don't have Internet access.

    Hello there, Wldsurfinslovakia.
    The following Knowledge Base article offers up the steps on how to sync music, including playlists to your iOS device:
    Managing content manually on iPhone, iPad, and iPod
    https://support.apple.com/kb/ht1535
    Configure iPhone, iPad, or iPod for manual management
    To manually manage the content, follow these instructions:
    Connect the device to your computer.
    Open iTunes.
    Select your iPhone, iPad, or iPod. If your device isn't visible in the upper right corner of the screen, choose Library.
    Click the Summary tab and select "Manually manage music and videos."
    Click Apply.
    Even when you enable manual management, you can still sync some content automatically. Select the iTunes U, Podcasts, Photos, or Info tab to enable automatic syncing for that content. 
    Manually add or remove content on your iPhone, iPad, or iPod
    After following the steps above, you can add individual songs, videos, and playlists from iTunes to your device. To add content to your device:
    Select your device.
    Click "On this Device."
    Then choose "Add to" in the upper right corner.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • How do I export a new playlist from computer to Iphone?  Sync did not move the new playlist

    I need to export new playlist to IPhone and cannot seem to make it work.  Usually it happens when I sync but not this time.  TIA

    La121485 wrote:
    how do I move a playlist from one lib to Iphone if phone not sync'd with that lib / pc?
    You create the playlist on the other computer which may require moving or copying of the media from the first computer to the second computer.

  • Mountain Lion did not detect the 1gb graphic memory

    I have the MBP 15'' Retina Display with NVIDIA GeForce GT 650M with 1GB of GDDR5 memory. After I updated to Moutain Lion, the about menu is show this configuration:
    - Monitor Color LCD Integrado (in Lion was Retina Display)
    - Placa Gráfica Intel HD Graphics 4000 512 MB (in Lion was 1gb)
    What I have to do?
    Thanks,
    Rafael.

    Whichever video card is in use will be shown under displays. Downloadhttp://codykrieger.com/gfxCardStatus. It lets you switch manually between the integrated and discrete graphics. P.S. I have it set to dynamic switch on battery and discrete only when plugged in for the smoothest performance when battery life is not a concern.

  • Could not find the fields in Flat file, But able to see the fields in receiver Communcication channel

    Hi All,
    My scenario is Proxy to file, After testing my scenario the flatfile is getting generated without any errors.
    I can able to see all the fields in receiver communication channel payload. But some fields are missing in flatfile which is generated after conversion.
    This is my structure below
    Record
    ---Header
          a
          b
          e
          g
    ---Trailer
          c
          d
    ---Details
          e
          f
    And here is my content  conversion below
    Header.fieldFixedLengths   2,4,6,7
    Header.endSeparator         'nl'
    Trailer.fieldFixedLengths     3,5
    Trailer.endSeparator           'nl'
    Details.fieldFixedLengths    6,7
    Details.endSeparator          'nl'
    Actually in header there are nearly 34 fields, I can able to see all the 34 fields in reciever CC, But in generated flat file I can able to see only first 30 fields remaing 4 are missing in flat file.
    it is like in the above structure In Header there are a,b,e,g fields.I am getting a, b fields e and f are missing in flatfile.
    Thanks in advance.
    Please suggest me the solution.
    Thanks & Regards,
    Satish

    Hi Satish
    As you said 4 fields values are missing out of 34. Are those fields values are coming as blank in the file or not at all coming.
    Ex:
    you have 4 fields a,b,e,g and in channels you have defined length as 2,4,6,7
    If values for fields a,b,e,g are coming as 1,22,33,44444 respectively then the flat file is generated as
    1-22--33----4444--- (Consider - as space here)
    Now if you say e and g value then is the flat file generated as
    1-22---------------
    or
    1-22--
    Regards
    Osman

  • Here, ipod touch screen went white,  tried to plug it in to itunes, computer did not detect it.  Tried pressing the menu and off/on button for 10 seconds and it still didn;t work?  Help please.

    Hi there, ipod touch went white.  I tried the menu and on/off button for 10 seconds.  I also tried connecting to the computer via i tunes.  My computer did not detect the ipod?  Any other options?

    See the white-screen topic of:
    iPod touch: Hardware troubleshooting

  • I did an automatic update to my daughter's iphone and it did not complete teh update. I tried to restore my updated setting but now my iphone will not start. I see the apple and a white line that never moves past 15%.

    I did an automatic update to my daughter's iphone and it did not complete the update from version 6.0 to I believe 8. I waited for hours but the line stopped at 70%. I tried to restore my old settings but now my iphone will not start. When I try to start the
    phone, I see the apple and a white line that never moves past 15%.

    Hi JG14usa,
    Welcome to the Apple Support Communities!
    I understand that you attempted an update on your daughter’s iPhone but the update will not complete. For this type of situation, it may be necessary to place your iPhone into recovery mode and restore. Please use the instructions located in the attached article to complete this process. 
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Best regards,
    Joe

  • IPhone DFU trouble: iTunes not detecting iPhone

    I've just picked up a replacement iPhone 4 after experiencing faults with my previous handset. I went through the process of backing up my phone from my last iTunes sync, and was then prompted to update the firmware to 4.3.[whateverTheLatestVersionIs]. For whatever reason, that firmware update failed; there was an error code, but I wasn't switched on enough to note it down a the time (I know, I know...).
    iTunes would no longer detect the phone, and the phone was stuck on the "Connect to iTunes" screen. So, I followed instructions to put the phone into DFU mode; this worked to a point - a Windows notification balloon popped up saying that Windows had detected an iPhone in DFU mode - so far so good. However, iTunes did not detect the phone. I have cycled in and out of DFU mode, restarted iTunes, restarted my machine and even shouted at the iPhone, but I've had no luck in getting iTunes to detect it.
    Anyone have any suggestions? I'd get myself to a Genius Bar if I could, but won't be able to before I go away for a long weekend tomorrow night; I'd like to have my phone working for this if possible...
    Can anyone help?
    Setup:
    iPhone 4
    iTunes 10.4.0.80
    Windows XP Professional, SP3

    Incidentally, the Windows balloon no longer pops up when I cycle in and out of DFU mode (although I am sure that I am managing to cycle in and out of DFU mode..)

  • Windows did not detect any networking hardware, Windows 7, New Hard Drive

    Message "Windows did not detect any networking hardware"
    Satellite P505 S8980 Windows 7 Home Premium.
    I replaced the Toshiba 500 GB HD with 500 GB Seagate.
    Device Manager icon for any device with yellow exclamation mark,
    Click on "Update Driver".  Lan eNet details as follows:
    Antheo - R8132 PCI-E Fast Ethernet Controller (NDIS 6.20)
    Browse to the folder where the setup program has the driver...
    Message: "The best driver software is already installed."
    (But the yellow exclamation mark still harasses me.)
    --- Go to "Setup new connection" ---
    "Choose a connection option"
    Click on "Connect to the Internet"
    Response: "Windows did not detect networking hardware"
    As near as I can tell, that translates from error 0x8E5E0247
    I have this same error on other yellow exclamation marks respective of what kind of device it is.
    => To test my sanity, I put the old hard drive (same size) back in and except for the impact of slowness due to error retries, everything works okay.
    Note:
    Same issue (hardware not detected) for Video adapter and Audio.
    I bought new USB Wireless adapter to test, and the driver installed but not activated because "not digitally signed", and that same issue fits all the above hardware.  I down loaded them from Toshiba, and they are confirmed installed, but not accepted with digitally signed.  I have uninstalled and reinstalled with same results.
    Solved!
    Go to Solution.

    I'm discovering I am not as well as I thought... running on the  AF hard drive which was built with a copy drive from old format drive which was the product of system recovery disc set.
    Review for context: Advanced Function HDD
    Scenario that exposes harm caused by cloning data from 4K blocks drive to 512 bytes blocked drive (AF)
    Toshiba supplied Windows-7 System Restore Discs: to factory state
    Then I built the Windows-7 Repair  Disc... used later.
    Hard drive was replaced when it caused SMART warning at every system boot.
    Acronis was only utility that quickly detected problem (3 sectors had permanent read errors.) Active@Disk Image and Power Quest Drive Image (Ghost) did not detect the issue.
    I tried Seagate 500 GB and Western digital 500 GB HDD drives as copy target.
    That new drive would not boot: "Required source not found"
    Booted My newly created Windows-7 repair disc, and used to to fix startup.
    See images.
    That worked and then the ST9500423AS disc booted.
    Now... next day I discovered Window Update is not working.
    I get message:
    Windows Update cannot currently check for updates, because the service is not running. You need to restart your computer.
    I ran Microsoft Fixit for updates.  It says it fixed two items.
    I still have the problem.
    The service shows "started"
    Control Panel/ ACTION Center/ Maintenance/ Check for Updates
     "No action needed"
     "Windows Update does not require any action"
    I checked  Update History...
    ... It is empty, else window is vacant... blank.
    Soooo..... for a sanity check, I swap out hard drive; go back to the old format (which is the one I copied).
    It works!  7 updates to install, including SP1... but I did NOT install them.
    Switch back to the AF drive... Update doesn't work. I am broke again.
    Is this another strange problem caused by the Advance Format issue?
    What to do?
    By the way... I did install an Intel storage Matrix driver  update, but I do not have RAID chip, so that driver is not for me... unless I missed out on something.
    Carl

Maybe you are looking for