IPhone 4 with iOS5; Changes in iTunes to music not reflected on iPhone.

It's really odd. I plug in my iPhone, open iTunes, make changes to playlists (add or delete, etc.) and add or delete actual songs to my iPhone (via iTunes), etc., but none of this gets reflected on my iPhone when I unplug from computer and open the Music app. When I open the Music app, all the old playlists and songs are still there. But when I plug the iPhone back into my computer and open iTunes and click on my device, all the changes are reflected (on iTunes after clicking on my device). I push Sync and let the phone Sync but it still does not reflect any of the changes when I unplug. What is even crazier is I go back to the iPhone and I can still click on songs to play them, even after I have deleted them through iTunes on my iPhone, and they no longer show up on my device through iTunes. Anyone have any suggestions?
This never happened prior to upgrade to iOS5 or backing up to iCloud.

I am just updating as I was finally able to get this to work. I went back and synced two more times with iTunes. The first time still did not make any changes to my iPhone. The second time, the sync hung (at least an hour later it was still syncing on step 5 of 5), but I "ejected" anyway. And this time the changes were reflected in my iPhone. I don't know why the first two Syncs did not make the changes, even though they Synced without issue.

Similar Messages

I thought that I was updating my phone...but it went into Recovery mode with the USB cord pointing to itunes and music notes in a circle. How can I get my Iphone 4 back to working without losing my data? I tried turning the phone off and it is uplugged.

My iphone 4 is stuck on the lock screen with the USB cord pointing to itunes and music notes. I thought I was updating the phone for itunes but it is now teetering on the Recovery Mode. I do not want to lose my data, etc. Can someone explain how I can get my phone back? Apple support is not helpful.

Your phone is in recovery mode. All data on it are already lost. You must connect your phone to your computer and restore through iTunes.

HT5100 I changed my course description last week but it still hasn't showed up with the changes in iTunes. When you download the course it is correct. Is there something I am missing?

I changed my course description last week but it still hasn't showed up with the changes in iTunes. When you download the course it is correct. Is there something I am missing?

Since the maximum OS X version for an eMac is 10.5, how are you running OS X 10.7.5 on the eMac?
http://support.apple.com/kb/TS1591

I updated the spelling of a song in my itunes but its not reflecting when i check my ipod. this never happened before when after i updated to IOS5. please help.

i updated the spelling of a song in my itunes but its not reflecting when i check my ipod. this never happened before when after i updated to IOS5. please help.

Try unsyncing the sone and then resyncing. That works sometimes. Sometimes restoring from backup works. Other times nothing seems to work.. Yuo are not alone since iOS5 and iTunes 10.5/6.

Changes to Derived Logical Column not reflected in Answers

Before I go off my rocker and stab myself with my IPhone lightsabre... :-)
I created a new logical column for an existing table in my BM, deriving from an existing column (a datetime field called ESTIMATEDCLOSE) as follows:
MONTHNAME(Sales.OPPORTUNITY.ESTIMATEDCLOSE) || ' - ' || CAST(Year(Sales.OPPORTUNITY.ESTIMATEDCLOSE) AS CHAR(4))
...which should give me something like "Jan - 2008". The problem is that it returned something like "2008/01/31 00:00:00" in Answers - completely unexpected.
I decided to start out small and try something simpler, changing my derived column to be only Sales.OPPORTUNITY.ESTIMATEDCLOSE. This returned "2008/01/31 00:00:00" in Answers - sort of expected.
Then I changed it to MONTHNAME(Sales.OPPORTUNITY.ESTIMATEDCLOSE). This also returned "2008/01/31 00:00:00" in Answer!!!
It almost seems as if a derived logical column is cached in some weird way and changes to the formula is not reflecting in answers. Thinking that something so simple must work and I made a simple mistake somewhere I have spend a good part of the past day playing around with this and trying every possible solution I can think of - no luck. The odd thing is that I would rename my logical column and this will be reflected in Answers, but changes to the derived expression is not reflected.
- I deleted the column and started all over - no luck
- tried creating derived columns using different datetime expressions or even just concatenating strings to each other - no luck.
- Restarted all the Oracle services, thinking it's a cach'ing issue - no luck.
- I rebooted the server - no luck.
Once, when I started out with only MONTHNAME(Sales.OPPORTUNITY.ESTIMATEDCLOSE) I got back correct values in Answers (Jan, Feb, Mar..) and I thought the problem was finally gone. So I added || ' - ' || CAST(Year(Sales.OPPORTUNITY.ESTIMATEDCLOSE) AS CHAR(4)) to the derived formula. Guess what, Answers kept on giving me back only the Month names, completely ignoring my updated formula.
Anybody else ran into this problem? Something so simple should surely work...

John,
Yes, cleared the cache (from Dashboard Administration) and also used nqcmd Call SAPurgeAllCache. Restarted BI Server. Still no luck.
I tried your formula and then only got back "2008/01/31" (just the date without the timestamp) - very strange.
Then I noticed the following amazing thing (by accident):
I started with a request in Answers that does not contain my derived column and then add my derived column to the report. The text would be all wrong in this column (Jan, Feb, March). Then I add the same column again to the report and the second added column will magically show the correct strings (Jan - 2008) !!! Even stranger is that the moment I added the same column again to the report, the text on the first column would also magically jump to the correct values (Jan - 2008).
I did a bit more testing and created a blank request and added my derived column as the only column - this time it will show the correct values immediately. It does seem like it's tied to the content already in the request. I went a step further and saved my buggy request and added it to a Dashboard - it worked perfectly in the Dashboard.
Must be something buggy here in Answers when working with derived columns. I'm on 10.1.3.4...

HT201406 I cannot get my touchscreen to work not even able to slide to turn on. tried resetting, waited for the apple and then the usb itunes disc/music note appeared then nothing.. is this ipod junk?

I cannot get my ipod touch touchscreen to wrok not even able to slide to turn on. Ive tried resetting, waited for the applie.. long wait then the USB plug appeared wit Itunes disc/music note then it just stayed there.. is this ipod junk?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
iOS: How to back up your data and set up as a new device
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Home sharing on the apple TV only shows itunes purchased music,not my whole music library.

Home sharing on the apple TV only shows itunes purchased music,not my whole music library. I can not find any settings to fix this issue.
How do I get home sharing to see the entire library?

AppleTV 2 and 3's main icon Music section is a shambles.
There should be a Music store as there was on AppleTV1. Crazy you can't access Purchases unless subscribed to itunes Match.
As Winston says you are probably not looking in the correct place for local streaming of your music library.
AC

WHILE TRYING TO SYNC MY PHONE MY SCREEN FROZE WITH A PICTURE OF A BLUE MUSIC NOTE, SAYS "ITUNES" BELOW IT AND A PICTURE OF THE END OF THE USB CORD. IT WILL NOT REBOOT OR DO ANYTHING ELSE...ANYONE ELSE HAVE THIS PROBLEM????

While trying to sync my iphone 4 my screen froze with a picture of blue circle with a music note in it, says iTunes under it and a picture of the end of the USB cord at the bottom...it will not let me reboot my phone and will do NOTHING else...anyone else have this happen?? How do I fix this??

Typing in all caps indicates shouting, is considered rude, and is difficult to trad. Many simply do not read such posts. As your title is in all cpas, many may not read it.
Have you tried to reset the iphone?
Restore it?

When the cell number associated with your ipad in itunes preferences is not yours.

When looking up my ipad's serial number in itunes preferences, there is a cell phone listed with this device that is NOT MINE.
Would there be ANY REASON that the cell phone number attached to my ipad in itunes preferences is not be mine?
Considering my ipad has been missing for several weeks - could this be the cell phone number of the person who has it?
Thanks

I'm not sure just where you are seeing this phone number, but could it be the "phone" number associated with a data plan? (It's just used as an identifier for the data traffic.)

Best backup of iTunes purchased music: not cd, or dvd

let's say you have 30 gigs of iTunes purchased music. what's the best backup if you can't choose cd or dvd? i'd figure another iPod would be the answer. any opinions on the matter much appreciated.
ipod_madness

If you don't want CD or DVD then another hard drive is the best bet. Get on of the external drives commonly available. Preferably get a drive with a fast connection that you can use like eSATA, Firewire, or USB2. After that simply copy from your current location to the external. Another option would be to use backup software so you only have to backup changed files.

Changes in Crystal reports are not reflecting after publishing

Dear SDN Mates,
We are facing problem with Crystal reports. After making the changes in the crystal reports, it is not reflecting in the portal after publishing. Still it is showing the older version of the report.
Can anyone please help me on this.
Thanks and Regards
Arun S

Hello Prathamesh,
After publishing the report, we require some changes in the report and doing some modifications in crystal report and again we are publishing this report. After publishing the report for second time, those changes are not reflecting in the BOE portal.
This is happening for all reports. Can you please suggest me on this.
Thanks and regards
Arun S

Changes made to files are not reflecting

File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected.
SharePoint 2013
Please help.
Thanks
Pj

HI Alex,
Answers to your questions inline below:
So you are editing a file, modifying the content in there and saving it but the changes are being lost?
Ans: Yes.
1. Have you checked the file immediately after closing it to see if the changes lasted?
Ans: I am not sure, if I checked the files immediately after. I think the changes were saved properly because I didn't get any error.
I managed to print out a file with a new element on one day but on the next day in the same file, I saw that element was not there.
I sometimes open the files through the Newsfeed tab, does that matter? My understanding is that the system is going to the original location to open the file
2. Do the changes then disappear later that day at some point?
Ans: That is my understanding.
3. Does this happen just for those files?
Ans: So far I have observed it for two of the files only.
4. Do you have versioning or publishing enabled on those lists? Versioning will let you see who changed it when and approval or publishing might be hiding things?
Ans: Versioning is enabled, publishing - not.
When I go to check versions to see, if maybe someone overwritten my change and retrieve the previous version, there is no previous version with the changes i made
the previous day.
Thanks.

Changes made in BOM are not reflected in Configurator.

Hi all,
When i update minimum and maximum quantities in BOM, the new values are not reflected in the configurator.
I have found a patch (patch# 4410573) for this issue in metalink and applying that patch did not resolve the issue.
I have logged an SR with Oracle for this and Oracle support have asked me to run "Refresh Single Configuration Model" concurrent program and see if the changes are reflected.
This program has 2 parameters one for folder and the other for Configuration Model Id.
When i try to run the program, for any of the folders, the value set for the parameter Configuration Model Id does not show any values and hence i am unable to run the program.
We don't have a separate instance for COnfigurator.
Do i need to do any set up so that my Configuration model is reflected in the LOV?
Can anyone please help me on this?
Oracle Apps version: 11.5.10.2
Configuration software build: 11.5.10.25.43A
Regards,
Sreekanth

Hi Jason,
Please see my comments below
Jason said*
Support is correct. If you haven't run the Refresh a Single Configuration Model concurrent program for your model, then the new BOM attributes will not be visible in your model. Changes to items/BOMs are not directly reflected in the configuration model. You must "refresh" the model to see the changes.*
Even without running the "Refresh a Single Configuration Model" concurrent program, in some scenarios, changes are being reflected in Configurator.
Ex:
When i change only minimum and maximum quantities, the changes i.e. new minimum and maximum values are not reflected in Configurator.
But, when i also change any of the following fields along with minimum and maximum quantities, new values are being updated in Configurator with out running the refresh program.
effectivity_date, disable_date, component_quantity, planning_factor, component_yield_factor and optional class
Can you please explain this?
Also, i have already tried executing the query by commenting the enclosing_folder check. But still, the query is not retrieving any records.
Basically, the sub-query that fetches devl_project_id itself is not retrieving any records.
Jason said:+
Based on the SQL above, the only criteria for importing a model is that the item under the folder must be:+
a. A Model (PRJ = Project)+
b. The Model cannot be deleted (Deleted_flag must be '0')+
c. And the model must have been imported from Oracle apps, e.g. it cannot be a non-BOM model (orig_sys_ref is not null)+
Can you please tell how can i check whether model is imported into configurator or not and if it is imported from where is it imported?
Regards,
Sreekanth
Edited by: Sreekanth Munagala on May 12, 2011 8:52 AM

Changes made from application are not reflecting in Database and vice versa

I am updating changes from my Application. However the data in not reflected in the DB. I logged in and can see no change. However, the changes are being reflected in the Application, even after a server restart. Any ideas on this ?? its wierd !!

SELECT   c.sql_text sqltext
    FROM v$session a, v$sqltext c
   WHERE a.SID = :session_id AND a.sql_address = c.address(+)
ORDER BY a.status, a.last_call_et, A.SID, A.username, C.pieceSQL_ADDRESS
SQL_HASH_VALUE
SQL_ID
SQL_CHILD_NUMBER
Check this to see the last executed sql in your database , make sure you connect to right database with right schema
Last executed sql

Changes made in RFC is not reflected in data services

Hi,
I am using a data service based on SAP R/3 RFC in my view
In my RFC i have some import parameters
and some export parameters
and when place a data service which is based on this RFC on the view for the first time , I am getting the import parameters and export parameters correctly
but the issue comes
when ever some one make changes in RFC and activating it again.
those changes are not reflected in data service (ex: a new import parameter is added or a parameter name is changed in the RFC, this is not reflected in data service)
i tried with deleting the existing data service and creating a new data service based on modified RFC
but even iam getting the data services details as pervious one ( as old data servie which i used at firt time)
why this is happening
how to solve this issue
regards
Srinivas

Hi,
Yes you need to restert the J2EE engine. Because when you imort it first time then it holdes it in cache memory. It will not be updated untill you restert the server. You restert the server then try it , you will get the right result for updated RFC.
Thanks
Chandan

IPhone 4 with iOS5; Changes in iTunes to music not reflected on iPhone.

Similar Messages

Maybe you are looking for