IPhone 4 won't play through speakers

Recently, wheneven I dock my iPhone 4 into a docking station, it will not play through the speakers. It will charge. I had this checked by the Apple Store and they said that all the settings are correct and there is no damage to the pins. I have tried docking in a Fidelio and and Sony docking station. No sound comes out through the speakers but, again, the iPhone is charging. Can anybody help with this? The Apple person suggested it maybe something to do with the Bluetooth but I've turned that off and on, and it doesn't make a difference. Thank you for any help or suggestions.

Have you tried a reboot
Hold home+ sleep button down ,ignore slide to off until the Apple logo appears then release
Generally if you get no replies it will be because now one has a clue with the info you have provided
ie as in what troubleshooting have you done .
http://www.apple.com/support/iphone/

Similar Messages

  • ITunes 12.1 won't play through bluetooth speakers

    Ever since the latest iTunes update (12.1.0.71 64 bit), my music from iTunes won’t play through my bluetooth speaker connected to my laptop. Every other sound the computer makes plays through the speakers while iTunes plays through the laptop’s built in speakers.The speakers are also set as the default audio device for the computer. There aren’t any options in the iTunes preferences that would allow me to choose an audio device to play music through.
    **My iTunes is operating on a Windows laptop and the bluetooth speakers are JBL if this helps, but everything was working fine until this new update**

    There is an alternative version for 64-bit editions of Windows here:
    iTunes 12.1 for Windows (64-bit — for older video cards)
    that seems to address the most of the playback issues that some users have been reporting with the full 64-bit version of 12.1.0.77 - including problems with Bluetooth speakers where either sound is degraded or completely absent.  The alternative installer here is the same architecture as most previous "64-bit" versions of iTunes, i.e., a 32-bit application with a 64-bit installer.  The "for older video cards" label appears to be something of a misnomer as some people have reported that this corrects problems found on current / high-spec systems.
    Some users have reported that after installing this alternative version it is necessary to adjust the "Play audio using" selection (normally to "Direct Sound" rather than "Windows Audio Session", though this may vary based on your audio hardware/drivers) in Edit > Preferences > Playback to restore glitch-free audio - one part of the reported symptoms is that the "Direct Sound" choice isn't available, usually in Windows 8.  It may also be necessary to ensure that your Bluetooth speakers are active and selected as the default audio device before you run iTunes.
    If this doesn't address the issue, you may want to think about reverting to iTunes 12.0 - see Turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for steps needed to completely remove all installed iTunes components, and for links to the 12.0 installers.

  • The New Mail sound won't play through SoundSticks

    After many many years of using Eudora as my E-mail client, I have finally switched to Apple's Mail. So far, so good, EXCEPT for an inability to have Mail's "New Mail" sound play through my SoundStick USB speakers.
    I should mention that I use a "dummy plug" plugged into the front headphone jack of my G5 so that I don't have to listen to the startup bong when I turn the computer on. This has never been a problem because I use SoundSticks for my audio and, since the G5 can't "see" the SoundSticks when you first turn the G5 on, no bong through the SoundSticks either. Once the computer is up and running, all audio comes out of the SoundSticks. This is true of all of the alert sounds my Mac makes too. Even the "Send Mail" sound (swooshing plane) plays through the SoundSticks as it should.
    But the sound I have selected for "New Mail" (no matter which sound I select) just won't play through the SoundSticks. If I unplug the dummy plug from the headphone jack I can then hear the "New Mail" sound through the internal speaker. But I don't want to hear it that way (and I don't want to permanently remove the dummy plug either).
    Why is it that Mail's "New Mail" sound is the ONLY bit of Audio that I've found that WON'T play through my SoundSticks?
    Help!
    Mark
    P.S. A friend of mine is having the exact same problem with a G4 connected to SoundSticks. He says "HELP" too!

    Anyone?

  • My play lists and songs on iTunes and on my iPhone won't play.  They are light grey instead of black and nothing happens when I click on the songs.  All of the songs were either from CD's or from iTunes that I purchased. I have home sharing turned on. Thi

    My play lists and songs on iTunes and on my iPhone won't play.  They are light grey instead of black and nothing happens when I click on the songs.  All of the songs were either from CD's or from iTunes that I purchased. I have home sharing turned on. This is a new issue.  It used to work fine.  I tried restarting my iPhone and syncing with iTunes. Neither worked.  Please help!

    Try delete those songs using iTunes by de-selecting and sync. After that mark those songs and sync again.

  • Ipod won't play through headphones anymore... and I JUST bought it!

    I just bought my 5th Gen. ipod nano a week ago and was working fine. After I had used it on my ihome docking station, it won't play through my headphones anymore.... I use the ear buds that came with it- all the player does is imediatly play through the speaker- is there a setting or something where I can hear through the ear buds? I know I have the earbuds pushed into the jack all the way, I can actually hear some music in the earbuds (just not very loud). What can I do?

    I know I have the earbuds pushed into the jack all the way, I can actually hear some music in the earbuds (just not very loud). What can I do?
    Sorry, allow me to ask you a question, have you tried to increase the volume of the iPod, if Yes, then bring it for service ... it is a hardware issue

  • HT1665 I have recently purchased a sony docking station and my ipod touch wont play through speakers.  does anyone know why

    I cant get my ipod touch to play through a docking station I have recently purchased.  A second ipod touch works fine.  Can anyone tell me why it wont play through speakers?
    thanks

    What model iPod and iOS works and which does not?
    Sometimes a 4G iPod will not fully sead in the dock because its case configuration is different that previous models.
    Also, sometimes an iOS update breaks compatibility.
    Have you checked the dock manufactuer's support stie for compatibility?
    Sometimes this works:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.

  • Album I downloaded is corrupted won't play through, how do I re-download it from iTunes.

    Downloaded a recording and it won't play through for completly transfer to my iPod. I bought a totally different album and there are no issues. Conclusion the first album is corrupted. How do I download a clean copy from iTunes?

    Hi Arthur,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    Deleting items from iTunes
    http://support.apple.com/kb/PH996
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/HT2519
    Cheers,
    - Judy

  • Airtunes won't play multiple speakers on Leopard 10.5.1

    Airtunes won't play multiple speakers on Leopard 10.5.1
    Everything was fine until Software Update to Leopard 10.5.1 last week.
    Works great on other Tiger-Macs but not on new Leopard-Macbook 2.2
    While attempting itunes launch with airtunes - Message window says:
    An error occurred while connecting to the remote speakers "Airtunes". Unknown error (-3256)
    Will play on computer speakers, or airtunes speakers but not both.
    Anyone experiencing similar??

    I have been plagued with the same problem as most here since installing Leopard. For some reason or another I could not setup AirTunes and view multiple speakers using my G5.
    Now I realize that not everyone has a laptop and a desktop but here's what worked for me...
    After a hard reset I created a network to airtunes using my PowerBook G4 and Airport Utility. At this point I was able to stream music to airtunes. I then changed the AirTunes settings, via the G4 to join my existing network, my linksys WRT54G router.
    Like magic everything is back to normal. I can access iTunes multiple speakers on both my G5 and my G4 PowerBook just like I did when I had 10.4 loaded.
    Just my 2 cents...

  • Headphones Plugged into iPhone , Music plays through speakers?

    Hi , Just recently bought a iPhone 3G , However when i plug in the headphones ( the ones included in the box ) , The music from the ipod still plays through the speakers , I am unable to find any setting related to this either so i am unsure what to do.
    - Alan

    Make sure that your headphones are plugged all the way in.
    Do you have a case that could be blocking them from going in?

  • HV20 - sound won't play through firewire to system speakers during import

    help please - When playing back captured HD footage on my HV20 via a firewire connected to my Dual 2.5 G5, the sound plays through the mini speaker in the camera, and not the large system monitor speakers connected to my computer. Once the footage is transfered to the computer, the clips then play back fine and the sound seems ok. But Is there anyway to get the sound to play through the computer system speakers druring import - it's difficult to properly monitor the import as the sound from the mini speaker on the camera is way out of sync with the visual displayed on the computer during the playback/import process - thanks for your help.
    William

    Dear SDillini:
    Thanks for your reply. I've been editing video on my Mac for some years now with serveral dfifferent cameras attached via firewire and always up until now, on the HV20, been able to monitor the sound from the video tape in the camera through the computers sound system as I was deciding which clips to import and which to leave alone while playing the video in the camera through the firewire to the computer. I'm able to see the video on the computer in real time, but there is no sound except from the small speaker in the camera and it plays out of sync with the image on my computer monitor, making in and out points of capture less precise.

  • IPhone won't play anything out of speakers

    My iPhone 4 won't play music or videos or my ringtone outloud. The phone is off silent, I have tried redownloading the music and even completely restoring the phone but it still won't work. How do I fix this?

    Restore the device before taking it in, but dont forget to back up to iCloud or iTunes.
    -MightEMouse

  • My Iphone does not play through headphones

    My brand-new Iphone 4S plays through it's speakers even though headphones are connected. I have tried:
    - Resetting the Iphone and restoring my old Ipod touch backup (could that be the problem?)
    - Using headphones other than the ones provided with the Iphone
    I looked through settings to see if I had accidently switched something to speakers only, but I didn't find anything.
    Suggestions please?

    I found the solution - apparently my Iphone was defective, and didn't recognize any Apple software the Apple Store employees tried to install on it. If anyone else has a similar problem, I reccomend you take it in to get checked, they might have to replace it.

  • ITunes 11.5.1 won't play through interface

    I have a MBP. I upgraded to Mavericks after a crash. I've been selectively restoring items from the backup drive. I installed the latest version of apps, including iTunes, MainStage 3, and Guitar Band, and reinstalled Logic Pro 9, all from the App store. I have an M-audio Firewire 410 hooked up to the computer to play through studio speakers. Everything always worked fine.
    Now, when I play iTunes through the built-in speakers, it works fine. But when I change the output in system prefs to Firewire 410, iTunes won't play any songs. The play icon turns into a pause icon, but the song isn't playing. It just freezes at the beginning of the song.
    I have reinstalled the Firewire 410 drivers, reinstalled iTunes, and repaired permissions a couple of times. I'm not sure what else to try.

    Hello LBV123,
    The next step would be to report the issue to the folks in the iTunes Store, as detailed in the article below.
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/HT1933
    Cheers,
    Allen

  • I TUNES WON'T PLAY IN 5.1 SURROUND SOUND WITH WINDOWS 7. ONLY PLAYS FRONT SPEAKERS AND SUB WOLFER BUT WON'T PLAY REAR SPEAKERS. YOU TUBE VIDEOS PLAY ALL 5 SPERAKERS .

    I TUNES WON'T PLAY MY LIBRARY IN 5.1 SURROUND SOUND ON MY DELL 4600 COMPUTER. I HAVE ALTEC LANSING SPEAKERS THAT ARE WIRED THROUGH THE  PORTS IN THE REAR OF COMPUTER. IT PLAYS ONLY FRONT SPEAKERS AND SUB WOLFER, BUT YOU TUBE VIDEOS PLAYS IN ALL 5 SPEAKERS. I HAVE A WINDOWS 7 OPERATING SYSTEM.  I TUNES LIBRARY PLAYED  CORRECTLY IN 5.1 SURROUND SOUND WITH WINDOWS XP ON THE SAME COMPUTER, BUT CHANGED WITH WINDOWS 7 OS. THE DRIVER SETTINGS ARE CORRECT AND SET TO 5.1 SURROUND SOUND AND WHEN GOING THROUGH SPEAKER TEST, ALL 5 SPEAKERS PING.  iS THERE ANYTHING I CAN DO TO GET THE REAR SPEAKERS TO PLAY FROM MY I TUNES LIBRARY? 

    Hi mikefrompoland,
    For more information about 5.1 Surround Sound in iTunes, you may find the following article helpful (it is primarily aimed at Mac users, but the settings in Windows should be similar):
    Setting up iTunes and your DVD Player for digital surround sound
    http://support.apple.com/kb/ht4072
    Note: For surround sound to work, the content being played must be encoded to support it.
    Regards,
    - Brenden

  • Iphone  won't play purchased music

    Songs ripped from cds play fine, even songs purchased from the iphone play fine. But songs purchased on my mac now won't play on the iphone. I have been away from home for a couple of weeks, so no sync recently. The music stops, the pause button changes to a play button, and pressing play doesn't work; the pause button quickly shifts back to play button. Thanks for any help.

    If you have all music that was purchased from the iTunes store in one playlist and you are syncing selected playlists, deselect this playlist under the Music tab for your iPhone sync preferences with iTunes followed by a sync to remove all music that was purchased from the iTunes store from your iPhone. Follow this by reselecting the playlist followed by a sync to re-transfer the music to your iPhone to see if this makes any difference.
    If you don't have a single playlist or multiple playlists for all music that was purchased from the iTunes store to deselect and reselect, deselect Sync Music under the Music tab for your iPhone sync preferences followed by a sync which will remove all music from your iPhone. Follow this by reselecting Sync Music and selecting the playlists, artists, or genres you want transferred to your iPhone followed by a sync.

Maybe you are looking for

  • Fields in sales order item level for pricing

    01.02.2011 Hi friends, I have a requirement wherein i need at least 3 additional fields at the item level in the Sales Order for pricing determination i.e i want this field to be used in the condition table. Since these fields should have list of val

  • Left touchpad is broken

    my left touchpad button is shaking and i need to press it hard.i think the springs inside are shaken.i bought this laptop 2 months ago and it has started creating problems for me.i bought this from India but right now i am in Uk for a year.where do i

  • The size of datafile

    I need to migration a ORACLE database. Try to use expdp / impdp to do the issue. So I will create database first. Now I met one problem: How big of the datafile will be better for performance? 5G one file or 10GB one file? OS: windows 2008 standard 6

  • CDMA Wireless Modem and dialup/sms

    I recently bought an Airplus wireless modem that uses CDMA. I have zero problem connecting to the Internet (www/mail/ftp). The device comes with a Windows install disk (which has stayed in the box) and a basic pdf (in Thai) for setting up the interne

  • Hex string conversion to ASCII Character string

    I have a Hex String 494A4B4C and want this string to get converted in ASCII Character String. IJKL. How to do in Labview 8.5.