Iphone 4 wont restore, help

I got a new iphone 4 yesterday, and I woke up to it saying connect to itunes. After doing that, it said "itunes had dectected a phone in recovery mode. You must restore iphone." So I click restore. And then restore and update. Then it says extracting software... But after that it just says "The iPhone "iPhone" could not be restored. An unknown error occurred (2006). and my iphone's screen goes back to connect to itunes. HELP!

Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on): If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.
From here >  iTunes: Specific update-and-restore error messages and advanced troubleshooting

Similar Messages

  • HT201210 my iphone wont restore coz of an unknown error plz help

    my iphone wont restore coz of an unknown error plz help

    iOS: Resolving update and restore alert messages
    BTW: This is the iPod Touch fourm.

  • TS1591 My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.

    My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.Help please!

    Hello chindeepchow,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694#3000
    Resolve communication issues
    Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
    Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
    Have a nice day,
    Mario

  • TS3694 my iPhone wont restore it says error 3194 its on version 5.1.1

    my iPhone wont restore it says error 3194 its on version 5.1.1

    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service

  • My iphone wont restore can anyone help me?

    My phone has just gone black and re appeared with the apple logo and now it wont restore in between restores the screen goes blue then nothing then back to the apple logo

    Hello, nickmj515.  
    Thank you for visiting Apple Support Communities.  
    When experiencing issues restoring an iPhone, here are the best articles to go through.  If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
    If you can't update or restore your iPhone, iPad, or iPod touch
    http://support.apple.com/en-us/HT201263
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/en-us/HT201210
    Cheers,
    Jason H.

  • HT3204 my iphone wont restore or update help!

    iphone wont update or restore help!

    That's too bad.
    When you're really ready for help, try providing some details of the problem that is occurring, like any errors that display.

  • HELP my iPhone wont restore!!!!

    I connected my iPhone to my MacBook and as usual he connects with iTunes.
    My iTunes asked for an update on the software of the phone. I confirmed and the process started.
    The update stopped but before finishing.
    I can't start up my iPhone and when I connect it to my iTunes he asks to restore.
    He starts restoring but then stops and gives an error 1611.
    Can somebody help me??? I have no idea what happend and how to restore this.

    READ ALL OF THESE NOTES THROUGH AND THROUGH TWICE before proceeding. You'll need to somewhat anticipate the next steps as you're doing this!
    1. Use a second computer and install iTunes... (DO NOT, I REPEAT, DO NOT uninstall iTunes from computer #1 (AKA) the computer you are having the issues with. (You may lose ALL of your iPhone info which is saved on computer #1. The info is already gone from your iPhone, so you will have to restore it!)
    2. On computer number 2, once iTunes is installed, hook up your iPhone. iTunes should tell you that it has found an iPhone in restore mode and it must be restored. Go through all of the steps until your iPhone is successfully restored. It should be very easy and iTunes will walk you through it. This will delete ALL of your info on your iPhone (which is really already lost) and it will get the iPhone back to the factory settings (just like it was the day you bought it)...
    3. If you keep getting errors saying the iPhone can't be restored, re-install iTunes on computer #2 and try again. (I REPEAT, DO NOT UNINSTALL ITUNES FROM COMPUTER #1) or any computer you may have synced your phone to previously.
    If reinstalling iTunes doesn't fix this and you still can not get the iPhone to restore, go to a 3rd computer and try until you get the iPhone restored to factory settings.
    4. DO NOT PLUG YOUR iPhone INTO COMPUTER #1 YET!
    Once the iPhone is successfully restored to its factory settings, walk back to computer #1. AGAIN, DO NOT PLUG IN YOUR iPhone YET!!
    5. On computer #1 open iTunes. Go to Edit/Preferences/Devices and check the box that says "prevent iPhones/iPods from syncing automatically". If this is not checked your iPhone may sync to a corruped restore point and you'll have to start over and re-restore your iPhone.
    *Note the device backup window on this screen. There should be at least one date and time from when you previously restored your iPhone. If not, you are probably screwed. Click OK and close that window.
    6. Plug in your iPhone and let it do whatever it does. Now, on the left hand side of iTunes RIGHT mouse click on your iPhone icon. Click "restore from backup"
    There will be a drop down menu that lets you select from your previous sync dates. AGAIN, if you haven't synced you could be screwed.
    Select a date from you which you think the iPhone will work, and click RESTORE.
    This should restore your iPhone back to that sync date.
    This worked for me!!

  • Itouch wont restore   HELP PLEASE

    i have a 2nd or 3rd generation itouch. when i unplug it from charging it doesnt work. and when it is pluged in the apple logo appears. i tried restoring it but i wont restore. all it says is "the ipod "******"could not be restored. an unknown error occered (1602). how can i fix this? PLEASE HELP ME

    As mentioned in your other post:
    Here are some suggestions, copied from Update and restore error messages on iPhone and iPod touch
    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

  • HT201413 my iphone wont restore and update and comes uo with -1 message

    my iphone 4 wont restore or update and comes up with message code -1 any help ?

    Perhaps try the Error 1 or -1 advice from the following document:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting

  • Iphone failed restore, HELP!

    Deep breath!.....Few weeks ago i noticed a few problems starting with my iphone 3gs. First thing was that music that previously played fine stopped playing (but was still playing in Itunes) then video's taken on the iphone itself wouldn't play desite the fact they had peviously, it said the format wasn't supported? Anyway at the same time itunes started crashing when syncing with the phone occasionally, this seemed to happen after i upgraded to 10.3....so i uninstalled (as apple instruct you to) and reinstaled 10.2.2 which had been fine, but the issue was the same. Anyway tonight it synced ok so i decided to do a system restore to see if that would solve the issues with the music and the videos.  The restore got so far through (about 1/4 on the phone progress bar) then it just stopped working, there was no error message and itunes itself didn't crash, the restore just stopped working. I left it for 45 mins, turned off my firewall and AV but nothing at all was happening so i disconnected the phone and then an error message (14) popped up, all i can now see on the phone screen is the apple sign and the task bar up to where it was when i disconnected. Anyway i decided to once again uninstall itunes (properly again) and reinstall 10.3.1 to see if that was any good. Now when i plug the phone in it doesn't even load itunes up automatically and isn't even recognised in Windows (7 64 bit). Just nothing at all seems to happen, although the drivers seem to be there when i checked the system settings. I've been to the services screen in windows and the apple mobile device and ipod service settings are all correct so i'm now totally stumped! Any ideas?!

    Hi Jeff,
    It sounds like you want to unlock your iPhone and tried to restore it but ran into an issue with that process. If your carrier gave you a new SIM, you can unlock the iPhone without restoring it as shown in the first article below. If you do not have another SIM or just want to resolve the restore issue, try the suggestions in the second article.
    iPhone: About unlocking
    http://support.apple.com/kb/HT5014
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/TS1275
    I hope this helps.
    -Jason

  • HT1414 my iphone wont restore itself how to i resolve this

    its an old iphone 3G it was passed down to me by my dad i think its a pretty old one and hasnt been updated for a long time... o wanted to remove eveything off the phone so i restored it but ever since it wont restore it tells me there is a problem it says there error code is 1015... how do i resolve this

    Error 1015 occurs on a phone that's been jailbroken.
    Jailbreaking not only voids any remaining warranty with Apple, but forfeits your right to any Assistance from Apple, including from this forum.
    In addition, discussion of jailbroken phones is strictly prohibited by the Terms of Use of this forum.
    You'll have to search elsewhere on the internet for assistance.  It's very likely your phone is permanently hosed.

  • Help- 3rd iphone wont restore complete info from 1st iphone!!

    Hi
    I recently upgraded to the 3G (not the S) & managed to restore all my info from the original iphone to my new one. Unfortunately, i managed to smash up my new iphone & have now got another one. The problem is getting the info on my 3rd iphone, I never had a problem with my 2nd, so i dont get it, its not like i havent done it b4............Anyway, I backed up my very 1st iphone 2day then tried to restore my brand new one. Its takn around 4 hours & it seems to have restored everything EXCEPT the App store & facebook application. As i have no App store, i cant re download the facebook app. I dont understand what ive done wrong???? I just want my facebook app back! More importantly, I want the App store on m iphone but cannot be doing with restoring all again...any idea welcome PLEASE!!!

    As this is an Apple forum you really can't get help for this problem here. Google is your friend (pr Ping)

  • My iPhone wont restore and is stuck. Any help?

    My phone was trying to restore, but I turned it off. Then it said I need to restore and now will now restore.

    1) Hold buttons sleep + home untill iPhone turns off;
    2) Open iTunes;
    3) Hold home button and plug the phone to your computer. The phone will turn on and the iTunes + Arrow + cable screen will appear.;
    4) iTunes will recover you phone from unsuccessful recovery process.

  • My iphone wont restore error 21. need pictures off my phone help

    i dropped my i phone and when pluged into charge you could only see the apple symbol on the screen. i got it into recovery mode but it will not restore or update comes up with error 21. there are pictures of my children on here that i do not see anymore that i need off the phone is there anyway to manage it

    You might have a hardware failure because of the shock. If so, you might not be able to recover your pictures. If you do not have a backup your pictures are gone.
    Resolve iOS update and restore errors
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
    Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Confirm that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.

  • HT201210 my iphone wont restore? SOS HELP

    its in recovery mode and i have no idea why. ive been trying to restore it so itll work again but it says "an unknown error has occurred (3941)." how do i fix it?

    Check for hardware issues
    Related errors: 1, 3, 10-47, 1002, 1011, 1012, 1014, 1000-1020, 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
    The above comes from here:
    http://support.apple.com/kb/TS3694#10

Maybe you are looking for

  • Changing from ABAP to BI

    Hi All, I am sriram, having 4+ years of experience on SAP ABAP, In which i have onsite experience also, Now i want to move from ABAP to BI. Is it right decission?. If i want to move what do i need to know before learning BI. Is there any specific cou

  • Strange 9i behaviour on scheduled report

    Windows 2000 server, 9ias RL 2, patches applied according Note 215882.1. I have a report that used to run well in 6i (9ias RL1). It is a scheduled report. It takes current (system) month and year as parameters. In the After-Report-Trigger I run the s

  • Turn off ImageBrowser in CS4 ?

    How can I turn off ImageBrowser in CS4 ?  Thanks.

  • Do you want to save changes made.

    i have m/s detail form. detail section is not compulsory need to be entered. i have put the following code in the When-New-Record-Instance at form level; IF :SYSTEM.FORM_STATUS ='CHANGED' THEN        IF      SHOW_ALERT('ALERT68')=ALERT_BUTTON1 THEN  

  • Changing the Label of a binary controller?

    What I am trying to do is create a binary switch that changes its label depending on it current state e.g. switch on label = 1 switch off label = 0. I have already tried using a property node inside a case structure but i always recieve an error (sim