Iphone 4s bluetooth connection after IOS 8.0.2

Have updated my iPhone 4s to IOS 8.0.2 the Bluetooth connection with my car is no longer, I have reset bith, deleted both re-paired both.
It can see the car Bluetooth just no longer makes it its first preference, with every phone call whilst in the car I have to manually select the car hands free.
this is not satisfactory as before the update it worked perfectly better than perfectly!

Hi Jimbig77,
Welcome to Apple Support Communities.
Take a look at the article linked below, it describes a similar issue and provides a resolution that may work for the issue that you’re describing.
Get help connecting your iPhone or iPad to a Bluetooth accessory
If that doesn’t do it, this article provides a lot of additional information and troubleshooting suggestions that'll resolve most Bluetooth issues.
iOS: Troubleshooting car stereo connections
I hope this helps.
-Jason

Similar Messages

  • Iphone 4S Limited Connectivity After IOS 7 Upgrade

    I have upgraded to IOS 7 a month ago.  Since that time, I frequently lose internet connectivity (says limited connectivity) using my personal hotspot as my only source for my home computers.   I had no issues with IOS 6 at all.  Can someone please help me?  I lost connectivity 3 times while typing this short message!
    Thank you,
    Dale
    Private info removed as required by the Terms of Service.
    Message was edited by: Admin Moderator

        I can see exactly why connection loss would be frustrating, dalebwilson! If you check on the hotspot troubleshooting http://support.apple.com/kb/TS2756, does it all look good?
    TamaraH_VZW
    Follow us on Twitter @VZWSupport

  • Internet not connecting after ios 7.0.2 update on iphone 5

    Internet not connecting after ios 7.0.2 update on iphone 5

    Hi there PompasJr,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Camera isn't functioning
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center. Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    -Griff W.

  • Is anybody else having a problem with Bluetooth functionality after iOS 7? I have lg tone Bluetooth headset that I use while working out, cutting the grass, etc. Before the update I could press the "next track", but anymore.... Help?! Please!!!!!!

    Is anybody else having a problem with Bluetooth functionality after iOS 7? I have lg tone Bluetooth headset that I use while working out, cutting the grass, etc. Before the update I could press the "next track", but anymore.... Help?! Please!!!!!!

    Tell Apple about it: http://www.apple.com/feedback/iphone.html
    Be sure to give as much detail as possible.
    I would also check LG's site.

  • No network LAN-connection after iOS 5.1.1update

    Today i tried to solve a big issue after updating my AppleTV's to 5.1.1 (actual version: AppleTV3,1_5.1_10A406e_Restore.ipsw). After updating my Apple TV´s, they could not connect to  the Apple activation server. No Home Sharing was adjustable and also logging in iTunesStore was not possible. The update I have done via LAN cable, and I changed  nothing in my network configuration. The network (networkadress via DHCP) is indeed set up by default in the AppleTV automatically. Nevertheless, nothing went. Then I removed the network cable and made a reset of the AppleTV and tried to connect via Wi-Fi. With Wi-Fi, he finds the activation server and everything works as it should. Home Sharing, iTunes, streaming. However, once the network cable is plugged in and the Apple TV is restarted, it is again not possible to get access the iTunesStore. Home Sharing is not possible. The networkcable are fine. Both MacBook, as well as my TVs have internet connection over the same network cable. If I unplug the network cable from the AppleTV again, anything goes. Only via WLAN, but it's just too slow to stream data from my Mac. I have this "strange behavior" on 3 AppleTV 3.Gen., which are in the apartment. The previous iOS-Version on the same network cables, worked great. Can anyone reproduce the problem? Or have I now 3 bricked devices? I tried to downgrade over itunes. But this is not possible anymore. I installed 3 times the update. But nothing goes. Please can anybody help me.

    I found another link titled "Apple TV Death after update"  and found several links that have proven to work to restore to the previous version.  Here is my post:
    "I had originally replied to a post titled "No network LAN-connection after iOS 5.1.1 update". That has been my issue after updating to 5.1. Wirless worked for me but iTunes match and Podcasts were slow to respond. I finally downgraded to the previous version (5.0.2). So far, my ATV3 has been operating exactly as it did out of the box. No more activation failed message, and all components of ATV are functioning flawlessly on my whole home LAN network.
    I also wonder what Apple was thinking for releasing this update without adaquate testing. I can forgive them for Maps, but not this. ATV has been around long enough for all of the kinks to be worked out and any updates to just plain work. I did like the new menu displays in apps and how you could rearrange the program icons on the home screen.
    Perhaps they will get it right. Some day. But until they show proof that any future updates are correct and provide detailed instructions on how to revert back to a previous version, I will be very leary of updating. Spending a week reading message boards on how to do a simple resotre is not my idea of how to spend my weekends.
    As a side note, I am a PC, so to restore from an .ispw file located on your system, you must press the Alt & Shift keys togather, then click the Restore button, and a window will pop-up so you can select the location for the restore file."
    Directions to restore:
    "Yes you can. I am a PC. Download the .ipsw file and save to your desktop. Unplug the LAN, HDMI and power cable. Connect the usb cable from your laptop to the ATV. If iTunes does not automatically launch, start it. After iTunes is running, plug in the power cable to the ATV. iTunes will recognize the ATV and will open the restore window in iTunes.
    Press the Alt and Shift keys togather, then click on the Restore button. A file window will open so you can navigate to the desktop (or where ever you saved the file). Select the AppleTV3,1_5.-.2_9B830_Restore.ipsw file. iTunes will start the restore process.
    When you see the message that it has completed the restore, unplug the usb cable and power cable. Reconnect the LAN and HDMI cable then plug in the Power cable in that sequence.
    Follow the setup procedure again and all should be as it was before."

  • IPhone 4s bluetooth connects but does not work handsfree

    My iPhone 4s bluetooth connects but does not work handsfree.  Has worked fine with My iPhone 3s.  The Light on my VW turns green indicating a connect, but the phone does not work through the VWs audio.

    Fixed by power cycling the iPhone

  • Iphone 4 keypad freezing after ios 7 upgrade

    iphone 4 keypad freezing after ios 7 upgrade

    Two methods that seem to work:
    Settings > General > Reset > Reset All Settings
    OR
    Settings > iCloud > Documents & Data: OFF

  • Ios 5.0.1 + Iphone 4 bluetooth connection issue with car stereo

    My Iphone 4 will not connect with my new JVC car stereo I have spoken to JVC customer support and they say its an Apple issue that they need to fix (changed something with the bluetooth connection scripts in the latest update update, as they have done before).
    The phone finds the stereo and then tries to pair with it, however half way through the pairing process the phone losses connection with the stereo and the pairing is then deleted.
    I have deleted all the existing pairing in the phone memory and ensured that the stereo has been rebooted to ensure no conflict of previous installs would effect the process
    Does anyone know if Apple are going to fix this glitch in a new softwre update (and if so when is it being released) as at the minute i have an expensive stereo which is cant use to its full ability?

    Similar problems occured when Apple released iOS 4 last year. It was NOT fixed with an update from Apple. It was fixed by the system vendors and automakers releasing updates for their equipment. There are ongoing complaints from people with some Toyota built cars (Toyota and Lexus) with some systems as well as some BMW drivers.
    I'm willing to bet money that the head unit you have is not fully standards compliant. Unfortunately, getting JVC to admit that is going to be nearly impossible. I suspect they will just quietly issue an update sometime in the next few months. Assuming the head unit can be updated by the end user at all.  You may have to resort to an inexpensive visor mount speaker phone in the mean-time.

  • Lost internet connection while restoring iphone 4S from backup after iOS 6

    Hi everyone..
    I have just updated my iPhone 4S to iOS6 yesterday. It was iOS5.1.1 and was in jailbreak mode before the update.
    I did sync my iphone and did the 'Backup' as well before the update by using my latest iTunes via my laptop.
    The iOS6 update was successful.
    However, the 'Restore from backup' failed.. many times!! Everytime I tried to Restore from backup, i lost internet connection towards the end of the 'restore in progress'  process so it was never complete. I had to pull out the iphone cable or restart my pc every single time that happened. Because i cannot get an internet connection after that happened. I cannot connect to any wireless network, so I had to restart the pc!
    (the iPhone says 'Restore complete' as soon as I pulled out the cable. But phone stays as NEW phone, none of my backup data was restored).
    During the 'restore from backup' attempts (via iTunes 10.7 on laptop), I have tried:
    - Restoring to factory settings first and then restore from backup = tried many times and still failed.
    - Uninstalled Apple mobile device and iTunes and re-installed them = still failed.
    - Switched OFF the phone and hold the Home button while connecting to the laptop. Restored to factory settings, then tried to restore from backup = still failed!!
    - switching to different USB ports on my laptop including USB 2.0 and USB 3.0 = no luck, still failed.
    NOTES:
    -Laptop is on Windows 7 and have had NO such problems so far. I have been using iPhone since 3GS.
    -Internet connection is via wireless router, steady connection.
    -My 3GS was on jailbreak mode before. I bought iPhone 4S and successfully restored from my '3GS backup' without any problem.
    -iTunes 10.7 installed/updated.

    Nevermind.. I just found the solution to my problem.
    I copied the Backup folder into my mate's laptop and did the 'Restore from backup'.
    All is good now.. Only need to re-install my apps, soon after all will be back as per normal!

  • My iphone has bluetooth connecting issue with my honda crv since upgrading to ios 7.1.2

    EVer since i downloaded ios 7.1.2 the bluetooth in my crv keeps sisconnecting and connecting. We took it to a fenius and dud a reinstall. It worked for aday andbow itdoing the same thing. Never had this problem before

    What troubleshooting steps have you tried to fix it?. The articles below can provide some step you can try.
    iOS: Troubleshooting Bluetooth connections
    iOS: Third-party Bluetooth accessories

  • Bluetooth connection fails iOS 8.1

    My iPhone5s cannot make a Bluetooth connectivity with any of my Macs(MBA mid-2013, iMac late-2012, MacPro) all running Yosemite 10.10. Prior to upgrading to Yosemite the same iPhone running on iOS 7 did make successful bluetooth connectivity. My iPhone5s is on 8.1. Surprising even though it cannot have connectivity, it sees and stay connected for a second or two and then will say "Not Connected". But the same phone connects with Blueant S4 handsfree Speakerphone - except that I have to make a connection each time. In the past, it used to connect automatically when I was in the range of my device.
    Yes, I have tried reset PRAM, SMC resets on my Macs, powered OFF and ON my iPhone5s and even reset my NW connection. In addition, I have other iPhones in my family and none can make connection to Macs which run on Yosemite(tried 4s, 5 and even 6). But the same iPhones make successful BT on Macs running Mavericks and Mountain Lion(yes one MBP still exists). So I am guessing it is changes in Yosemite that is causing the problem. Because I am going through this problem - my family members who have Macs do not want to upgrade to Yosemite as they depend on BT connectivity for their external devices. I don't blame them, but sounds very silly to me that Apple messed up big time with BT connectivity. I see many reporting similar issues, but for many resetting PRAM and/or SMC they have been successful.
    Any help would be appreciated. Again I am not referring to Handoff (which it is working for me) but I am interested in BT connectivity with Yosemite. This is important because external BT devices need to be connected(Headphones, Earbuds etc).

    I went to the Apple store yesterday because I was having the same issue in my Honda Accord after I updated to iOS 8.1.1.  The very helpful rep there suggested that I go to Settings -> General -> Reset on my phone to reset my iPhone 5 General Settings.  She said that it's like an oil change for the phone that cleans out a lot of the junk.  After doing this, I was able to stream both my music and Pandora in my car again.
    Note:  When you reset the General Settings, you will lose your phone password and background image (not a big deal).  You will NOT lose your pictures, video or emails.
    Hope that helps!

  • Iphone 4 bluetooth connection with car

    My iphone4 (iOS 4.2.8) pairs with my 2008 toyota Sienna bluetooth; however, it continues to fail and drops connection after a day. It shows it is paired, but I  have to continue to re-pair it to actually get it to work. My ev3 LG phone worked great, so it's not an issue with my car. Any fixes? Is this an iOS problem. I've hear that from the Toyota dealer. They seem hear the issue frequently with iphone users.

    It's not just the bluetooth car radio. Lots of problems with bluetooth stereo overall.. My s305 motorola headphones worked fine until I upgraded recently to 4.3.1 now and it's pretty much unuseable. Practically impossible to get to connect, pair, unpair, reset etc.. Sometimes it will connect but then it pretty much disconnects again after a minute or so. Used to work for me most of the time but it's never been great; now it's abismal.
    Check this thread out for lots of others with the same problem...
    http://reviews.cnet.com/8301-195127-20008764-233.html?refresh=1301768822360&tag=rbcontent;overviewHeadProfile
    Message was edited by: unclej2k

  • VW Iphone 4s bluetooth connection drop problem, is there a solution or do apple not care

    Many people are finding their Iphone 4S drops connection with their VW (Passat etc) integrated bluetooth hands free system after working fine for 5, 10, 20 minutes. The only way to reconnect is to switch the car off or turn the Iphone bluetooth off & back on.
    This is a dangerous fault and it appears that both Apple & VW have no solution (or are ignoring as they have already sold you a phone & a car).

    VW UK (unofficial information) have admitted that their bluetooth system in cars produced prior to 2012 has a
    compatibility problem with the Iphone 4S.
    This is due to that bluetooth system being developed prior to the launch of the Iphone 4S.
    VW cars produced in 2012 have a different bluetooth system that works OK with the Iphone 4S.
    As the bluetooth systems are different we are told there is no update software for pre 2012 cars & it is unlikely that
    there will be any update in the future.
    We have checked this theory as we have 2011 & 2012 VW Passats in our fleet & the drivers of the 2012 cars
    have no problems with their 4S bluetooth, the drivers of the 2011 cars all have drop out problems.
    The best we can hope for is that Apple acknowledge the problem that they have created (as it is not a VW only issue)
    & bring out an update for the 4S that makes its bluetooth as reliable as the Iphone 4.

  • No blue tooth connection after ios upgrade

    My Iphone 4s does not find any bluetooth devices after upgrading from ios6 to ios7.
    I've tried reseting all configurations for network connections and all configurations in the phone without success.
    What is the next step?

    The iPhone has previously been paired with the device. But neither the iPhone or the connecting device (car stereo) detect the other device after this upgrade. I have removed all previously paired devices from the car stereo and other iPhones detect the car stereo.
    It's like the iPhone bluetooth doesn't start at all.

  • Iphone 5s touchscreen issue after IOS 8.0.2

    Hi All,
    I've been having an iPhone 5s for a year and ever since i've updated to IOS 8.0.2. My iPhone touch screen has became unresponsive. It happens after i unlock my phone and it just gets unresponsive. It could happen after a few seconds of usage of any app or just messaging. It has become really frustrating. The only way I could get it back on working was to lock and unlock my phone.
    I've tried restarting my iPhone, and ask restoring my phone with a new Set up. But the same issue arises.
    The only thing i have not tried was to check if there was some connectivity issue inside the phone. My warranty was over end of september and I do not wish to pay for a replacement fee as It be a better option to get a new one.
    My phone specs:
    Iphone 5s 64GB Silver.
    IOS 8.0.2
    Memory Used35.3 GB

    I Hope there's an fix for this. And hopefully it's the software problems.

Maybe you are looking for

  • Null String and Empty String problem

    Hello everyone, since i am totally new in JSP, i am getting problem in handling strings. Suppose i have a variable users = ""; then I want to ask when to use: if (users.equals("")) and if(users == "") in my code, variable users has value "regional" f

  • Lightroom Flash Web Gallery Size limitations

    I just created a flash web gallery with about 250 images and I can view it fine when open the webpage locally from my computer. But when I upload the folders to my server, the images are taking forever to load, if they even finish loading. Is this ex

  • Preloaded registration utility missing after recovery

    Hi! I have a ThinkPad T42p laptop computer with Machine Type: 2373-HSG and Serial Number: 99K8TAZ. When the computer was delivered to me brand new from the factory, there was a "Registration" icon on the desktop which opened a special electronic regi

  • Script Logic: Changes in FACTOR ignored

    Hi colleagues, I'm running a basic allocation (BPC 7.5 MS): *RUNALLOCATION *FACTOR=USING/TOTAL *DIM P_ACCT WHAT=5301010130; WHERE=5301010130; USING=5301010130; TOTAL=5301010130 *DIM P_RE WHAT=160371292;WHERE=[LAND]='UK' AND [DIVISION]='Land' AND [ID]

  • Site Definition losing FTP User ID and Password

    My configuration: iMac 2.4 GHz Intel C2D 10.6.1 Snow Leopard DW v10 (Build 4117) Not sure if my issue is related to the one described in this thread. I recently performed a clean install of Snow Leopard and DW. Afterwards I imported my site definitio