IPhone 4s Bluetooth searching devices ...
iPhone 4s Bluetooth not finding any devices including iPod touch. Just sits there "Searching ...No other bluetooth devices can see iPhone. Any ideas?
These are the Bluetooth profiles supported by iOS:
http://support.apple.com/kb/ht3647
If you're trying to use any others for other reasons than those listed it won't work.
Similar Messages
-
I had my iPad 2 (WiFi only, 64 GB) tethered to my iPhone 3GS via bluetooth to share internet. After turning bluetooth off to save battery and then on, they didn't link aymore, so I omitted the devices in each one another, but now I can't pair them again, they just don't show in the devices list of the other device.
I reset all the adjustments in the iPhone, but I only get in the found bluetooth devices a list of MAC addresses, none corresponding to the one of the iPad.
iPhone has iOS 4.3.2 (8H7) and iPad 2, iOS 4.3.3 (8J2).
Thanks,
Enrique Celedón V.Hello sallyally, I will explain what I did, perhaps some steps are not necessary:
1. Turn bluetooth off in the iPad: Settings->General->Bluetooth->OFF
2. Turn bluetooth on in the iPhone: Settings->General->Bluetooth->ON
3. Share internet access in the iPhone: Settings->Personal Hotspot->ON
4. Go to bluetooth in settings of iPhone: Settings->General->Bluetooth
5. Turn bluetooth on in the iPad: Settings->General->Bluetooth->ON
6. Both devices should find each other and show the same code, press ok or something like that and it is ready.
Let me know if it worked. -
Sorry, if I've posted in the incorrect place. First post, please bare with me.
I've been trying to transfer photos from my old Samsung Galaxy Ace & Toshiba laptop via Bluetooth to my iPhone 5.
iPhone but message of "not supported" comes up when pairing. iPhone stays in search mode when trying to discover devices & does nothing.
Thanking you all in advance for your patience, understanding & help.All you can connect via BT are headsets and keyboards. You cannot connect to your Galaxy or laptop. That's why it says "not supported."
-
How to connect iphone 5 with ipad 2 using Bluetooth? When I activate Bluetooth both devices search but not listing each other to pair or connect.
You can use Photo Transfer App to transfer photos from iPhone to iPad or vice versa using Bluetooth or WiFi
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/3dd129795daebebc4b8 741b057f5f70d.jpg
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/3af5c541040e15e3f6b 3356e4c55cbfc.jpg -
Bluetooth not working on my iphone 4 .using iOS 5..not able to search devices in range.Need help on this.Any suggestion guys that would be very handy...
To what device are you trying to pair your phone? The iPhone doesn't pair with other phones or computers.
-
hi everyone
how do you in xcode search devices in bluetooth and stablish connection other devices whit iphone or ipad ?
the all answer is good
and the source is enable for allBluetooth on iOS has three different functions:
o user level features -- For example, headsets. There is no developer opportunity here (well, you can play audio that comes out the headset, but you know what I mean :-).
o networking -- You can establish a PAN network to other iPhone OS devices with GameKit (going away) or Bonjour.
o accessories -- All Bluetooth accessory developers must go through the Made for iPod program. Once you have an MFI device you can then talk to it through ExternalAccessory framework.
<http://developer.apple.com/ipod/> -
My IPhone 5s Bluetooth cannot locate Jam 2 wireless speakers. Searches endlessly...need help
The issue with me was that my iPad was synced to the Bluetooth device, and I was trying to sync my iPhone.
The blue tooth device (in my case speakers) cannot be synced with two devices at the same time.
So I turned off the Bluetooth in my iPad then paired my iPhone . Obviously the Bluetooth speakers can have only one source.
Now both my iPad and iPhones are paired with the Bluetooth speakers, but I can only use I at a time.
I did not have this issue with my car stereo as it accepts hierarchy. IPhone a primary, iPad as secondary and so on.
Hope thi helps -
My iPhone 4 Bluetooth, using ios7, cannot identify any other bluetooth device (even other apple products). Says device not supported. How to solve this problem?
Supported Bluetooth Profiles
It is not supposed to detect other Apple products via Bluetooth. -
My iphone 3 bluetooth is searching all the time
my iphone 3 bluetooth is searching all the time ,it is not working properly
ple solved this problemsThat's completely normal. Everytime you open up the bluetooth settings menu, it will indicate the bluetooth is searching. It stops when you get out of the menu.
-
How can i get my iPhone 5S bluetooth to work? It does not pick up other devices.
How can i get my iPhone 5S bluetooth to work? It does not pick up other devices.
Shairationgco wrote:
It can't even detect my husband's iphone help!
It's not supposed to. Why are you trying to connect your iPhone to your husband's iPhone? -
My iPhone 4s Bluetooth is not working, I have ios 5.1 but just can't get my Sony erricson hbh-pv715 headset to connect to the phone, the phone can't find any Bluetooth device, can you help please
Yes it's in pairing mode, it worked fine with the 3GS but doesn't seem to work with the 4s, my 4s can't find any other bluetooth device, I think the problem ls with apple?
-
My Iphone 5 bluetooth is not fouding other iPhone as device
My IPHONE 5 Bluetooth do not found other IPHONES as devices?
You can only connect to handsfree devices, keyboards, headphones using Bluetooth.
Connecting to other phones or iPods is not supported. -
Iphone 4s bluetooth not discovering devices
Trying to pair one Iphone 4s with another IPhone 4s via bluetooth. Iphone keeps searching with the wheel spinning.
Checked network settings. Everything looks ok. Any answers?You can't pair 2 iPhones via Bluetooth.
-
IPhone 4S bluetooth not discovering bluetooth devices
My iPhone 4S bluetooth is not discovering bluetooth devices, specifically my new Platronics Voyager Pro HD headset which worked just fine with the iPhone 4 even after the recent software upgrade. I noticed that others are having bluetooth discovery issues as well. Will Apple be addressing this problem with a software fix or is this a hardware problem?
CrystalVanNevermind! It always helps to re-read the Platronics - how to pair your device instructions. DUH!!!!
-
My iphone 4 bluetooth does not discover any other devices or phones having bluetooth and ofcourse does not pair with other bluetooth devices or phones? How can i transfer files to other devices through bluetooth? Thanx
you can't tranfer files with the built in program that apple gives you, you may (i belevie) download an app that allows you
Maybe you are looking for
-
I don't understand firmware, but I know I needed to update my CP2025dn printer's firmware. I used my older computer to do this. If I had used my newer computer with Windows 7, would this affect my printing from either computer? Thanks.
-
Macbook connection to aquos sharp
Hello, I have tried connecting my Macbook to my sharp aquos tv via DVI and eventhough my mac picks up the sharp, there is no image on the tv. I have changed resolutions, restarted, tried changing the analog pc to digital pc but for some reason it is
-
Probleming Installing Crystal Reports 2008 Service Pack 1 to Vista 64bit OS
Hi There, Whenever I attempt to install SP1 to Crystal Reports 2008 I am unable to get past the disk space check. It just continues to display the message below. "please wait while the installer finishes determining your disk space". I found this t
-
What version of Lion is available from Internet Recovery?
hi, Is there a way to check beforehand which version of Lion is downloaded when you reinstall the OS through Internet Recovery. On 6/2/2012 this is still 10.7.2 even though the version available on the Mac App Store is already at 10.7.3. Thanks! ferj
-
DATA_INCONS_IN_EXIT_MANAGEM - reg BADIs
Hi, I have written a BADI and trying to invoke a method in it from my ABAP report program. This is the piece of code that i am executing: DATA: exit_ref TYPE REF TO ZVEN_INT. CALL METHOD cl_exithandler=>get_instance EXPORTING exit_name = 'ZVEN_INT'