IPhone 4S bottom speaker not working

My iPhone 4S bottom speaker isn't working. Headphone jack still works. When my phone is on speaker people can hear me but I can't hear them. There's no sound when my phone rings or when I'm typing. It's driving me nuts. I've been to sprint & I've called Apple & was told that they can't give me a brand new phone, but refurbished is just as good. I tried the air thing & still nothing. Any other solutions?!?
Thinking about going back to my S3

There is only One speaker on the bottom... The Other is a Microphone...
iPhone User Guide

Similar Messages

  • IPhone 4 phone speaker not working

    Have seen a lot of posts on this issue, but not as much recently, at least nothing with a working solution.
    2 days ago, the phone ear speaker stopped working on my iPhone4.
    -Speakerphone still works
    -Earbuds still work
    -Mouthpiece still works (others can hear me).
    -Cannot hear voicemails through the ear speaker either.
    I have tried:
    -Restore via iTunes
    -Reset via phone
    -Cleaning the ear phone port
    -Cleaning the ear speaker grill
    I have a 15 month old iPhone 4 running OS 5.0.1
    Any ideas out there?

    I had this exact problem. I upgraded to 5.1 and thought that WAS the issue. BUT I found a person who said they pressed around the earphone jack and ear speaker and got theirs working. So I took the phone out of my Otter Box and did that, it still didn't work... BUT the struggle of getting the phone back in the Otter Box apparently triggered something that worked as everything is back to normal... for now. So it was a harware issue. Hope this helps!

  • IPhone 4 ear speaker not working after 2 restores and cleaning the headphone socket.

    Hi,
    I know this problem is not uncommon, but here goes...
    I have an iPhone 4 which was running iOS 5.1.1 a few days ago when the ear speaker stopped working.  I cant hear the other person when I make or recieve a call, but nothing else is wrong with the phone.  It is 18 months old.
    I've searched the discussions and seen some of the suggestions.  I tried cleaning out the headphone socket, with no luck.  I then tried a full restore and update to iOS 6.  This appeared to have worked.  I tried 2 calls and I could hear the other person.  I then left the phone alone for a couple of hours and when I tried it again, it had stopped working again.
    I have since done another full restore but the speaker is still not working at all.  The fact that it worked after the first restore suggests it's something simple or software related but I have no idea what else to try other than getting it repaired in a shop.  The problem is I am in Japan where my network (Softbank) and an independent repair shop have both quoted me the equivalent of $176 / £110 to fix it.
    Does anyone know anything else I can try before I give in and end up shelling out this ridiculous cost for something that is probably a 20 minute fix?
    Any help would be appreciated.
    Thanks

    I have the exact same problem with my ear speaker after my IOS 6 upgrade. My speakers work, bluetooth works, the earphones work, but the ear speaker doesn’t work. I noticed this IMMEDIATELY after the upgrade was completed. I also have the following problems:
    -Very slow call connect time. 30 - 45 seconds just to connect is typical. Signal strength is 5 bars (ATT)
    -Problems attaching to known networks
    -Very slow internet browsing with many timeouts on both the ATT 3G service and known Wi-Fi networks.
    - My camera was missing after the IOS 6 upgrade. I restored that from Restrictions inside of the Settings App
    - Music was so screwed up it was easier to just restore it
    I went to the Apple store hoping to get some support. Between my wife, my son, and myself we have purchased 4 iPhones and an iPad over the last few years with plans to purchase another iPad in a month or so. So it’s not like I' not familiar with Apple Technology and their typical level of support.
    The individual who waited on me was rude and condescending. He insisted that all of the problems were hardware related or ATT’s fault, or my fault. He further asserted that IOS 6 had NOTHING to do with any of the problems. I pointed out that it would be quite a coincidence for my hardware to break, for ATT to have network problems, and for me to suddenly forget how to use an iPhone at the same exact moment that IOS 6 had been installed. He maintained his position and offered to sell me another phone.
    I don’t expect the folks in the store to reprogram the OS. Mistakes happen. I’m going to guess that Apple’s OS programmers are already working on a fix for many of the IOS 6 complaints that are easy to find on Google. Assigning blame to the customer and denying any responsibility is not a model for success or customer service. I’m sure Apple wouldn’t accept that kind of excuse from their component manufacturers and don’t think it is how they should deal with their customers. Further, Apple wants to own the device. They want to control the apps, the OS, battery, the delivery channel. I’m good with that so long as when there is a problem, they own that as well.
    And BTW… I’m not including the maps in my list of issues with IOS 6 because I kind of like the new maps and am willing to give Apple the benefit of the doubt. I believe that their map service will get a lot better in a hurry.

  • IPhone 4 ear speaker not working

    Looking for more info regarding this problem..
    Purchased iPhone 4 for my wife and I last month.
    My iPhone ear-speaker went dead, but the external speaker, plug-in wired ear-phones work, and mic still work.
    I went to take it in, and then the darn thing started working again. lol  Same thing happened early this week - not working, then it started working again.
    Now my wife's iPhone 4 is starting to do the same thing. argh!
    Not really sure if it's hardware or software.. but anyone else on this forum experiencing this same problem?

    Yes. My Bluetooth on my iPhone 4 is enabled (to sync with my car).
    But my wife's iPhone 4's Bluetooth is not.
    I Googled this "ear-speaker problem" and found a few other reports, but no solutions (on Apple support forums).
    Just wondering if the people of this forum encountered the same thing.. thanks for your fast reply !

  • Iphone 4 earpiece speaker not working after call connection

    my iphone 4 earpiece speaker is not working, i replaced new speaker but still problem is persisting. When i keep the phone in freezer it works very well till phone is cool afterwords its speaker remain silent. any solution guys

    Stevo I did a complete restore, not sure if you've tried it yet but just make sure your stuff if backed up before you do it .  Then I started fresh like I just pulled the phone out of the box and with Verizon you dial *228 and select option 1 to update .  Then it all of a sudden started working agian .  Give it a shot .

  • IPhone 4 Mic & Speaker not Working during Call

    Hello All,
    I have iphone 4 and it was locked on at&t and was running ios 5.0.1, now i have unlocked my iphone and now i am using ios 5.1.1. But i have a problem, when i call someone i cant hear anything "no dial tone sound and no sound during call" & speaker mode is also not working and nor the person cant hear my voice. I also tested on my another phone but same problem.....
    So can you tell me is this a hardware problem or software problem ?? and yeah i can record voice memos and i can listen my memos with speaker on and off
    Waiting for reply....

    Do the basic troubleshooting steps described in the User Guide:
    1.  Reset iPhone (no data loss): Press both home and power buttons for at least 10 seconds, releasing when the Apple logo appears.
    2.  Restore in iTunes using a backup
    3.  Restore in iTunes as new, without using a backup.
    If restoring as new doesn't help, there is a hardware failure.

  • My new iPhone 4S speaker not working why?

    my iPhone 4S iOS 7.0.3,model MF266HN/A,8GB one speaker not working why? What can I do?

    All iPhones are mono. Stereo is only available on Earphones.
    Bottom left is mic and right is the speaker.

  • I reset my iPhone 5s yesterday because my fingerprint bottom is not working. It says that failed every time I was trying to put my print... Now that I reset my phone the fingerprint pass code do not appear in the setting.

    I reset my iPhone 5s yesterday because my fingerprint bottom is not working. It says that failed every time I was trying to put my print... Now that I reset my phone the fingerprint pass code do not appear in the setting.

    Hi Emilemny,
    Welcome to Apple Support Communities.
    The TouchID settings will not be available until you create a passcode, see the article linked below for more information.
    iPhone 5s: Using Touch ID
    http://support.apple.com/kb/HT5883
    You can set up Touch ID in iOS Setup Assistant or by tapping Settings > Touch ID & Passcode. To set up Touch ID, you must first set a passcode. Touch ID is designed to minimize the input of your passcode, but you need a passcode for additional security validation, such as enrolling new fingerprints.
    -Jason

  • My iphone 5 the volume bottom does not work  how to replace it in apple sotre

    My iphone 5 the volume bottom does not work  how to replace it in apple sotre
    i read sb said they only replace the iphone by pay more 210 quid is this ture ?

    Hi Austin XQ,
    Thanks for visiting Apple Support Communities.
    Based on the information you have provided, it sounds like your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
    Best,
    Jeremy

  • IPhone 2G voice mic not working

    Has anyone come across iPhone 2G voice mic not working (not being heard by the other person) but works fine on speaker phone and bluetooth headset. It has been working fine so far and suddenly developed this problem! Any help is highly appreciated….

    I had that problem with my iPhone 3G after about 5 days.
    I just had Apple take a look at it.
    They cleaned it out, called it and stuff.
    Didn't work.
    Since I didn't drop it in water and it was not my fault in any way, they gave me a brand new one.

  • My Iphone 4 network is not working in Malaysia

    My Iphone 4 network is not working in Malaysia as I offered for 2 month period by behalf of my company and when buy a sim card in Malaysia then I only realise there were no network and I bring to a shop and they upgraded my Iphone and it stuck on the activation part which require a network. Any Solution ?

    iphone 4 and 4S have two microphones...bottom n top...sometimes top microphone is covered by the case or sheet as in my case..and when i just put off the case it was working fine.....i just got problem today and today it is solved again.....may be its ur case or may be ur case is a genuine hardware software problem...just for info

  • My iphone text tone is not working when I plug in the earphone.

    Hi,
    My iphone text tone is not working when I plug in the earphone.
    My earphone is always plug into the iphone as I use it to answer calls. I notice that iphone does not alert me (sound) when there is a new messages. Instead the text sound is transfer to the earphone speaker.
    As the earphone is plug into the iphone and I am not putting it on always, I need it to still hear the text tone whenever I received new messages.
    Anyone pls help.. the problem still there even I updated..

    goh steven wrote:
    hi wjosten
    I don't put the iphone in my front pocket. I put in my bag pack so vibration is not useful to me. Pls help
    The iPhone is working exactly as it is designed.
    Your options are:
    1) Unplug the headset.
    2) Leave the headset plugged in and the earpiece in your ear at all times.
    3) Turn on vibrate and put the phone in your pocket.
    4) Leave feedback for Apple and hope they deem it worthy of their time to fix.
    This is a user to user forum, these are the only solutions we can offer you here.

  • My iPhone 5 remainder is not working

    MMy iPhone 5 remainder is not working .... I am not able to add anything in remainder due non function of + symbol

    Morning MHamilton24,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    No sound through stereo headset1
    Inspect the headset jack for debris and clean if necessary.
    Connect the headset and make sure the connector is pushed in all the way.
    Check the volume setting. Adjust the volume by pressing the volume up and down button on the left side of the iPhone.
    If you are trying to listen to music and cannot hear any audio, make sure that the music on iPhone is not paused. Try squeezing the headset microphone to resume playback. Additionally, from the Home screen you can choose iPod > Now Playing, then tap Play.
    Make sure the latest version of iTunes is installed on the computer that you are syncing the iPhone with (songs purchased from the iTunes Store using earlier versions of iTunes won't play).
    Try another Apple headset (some third-party headsets require an adapter to be used with original iPhone).
    Try a different song or video.
    Check to see if the iPhone alert sounds or other iPhone sound effects exhibit the same audio issues.
    Disconnect the headset from the iPhone and see if sound comes from the built-in speaker.
    Best of luck,
    Mario

  • My iPhone 5 earpiece is not working

    my iPhone 5 earpiece is not working.. i can only hear through my speaker or if i plug in my headphones...does anyone else have this problem and can anyone help me??

    Morning MHamilton24,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    No sound through stereo headset1
    Inspect the headset jack for debris and clean if necessary.
    Connect the headset and make sure the connector is pushed in all the way.
    Check the volume setting. Adjust the volume by pressing the volume up and down button on the left side of the iPhone.
    If you are trying to listen to music and cannot hear any audio, make sure that the music on iPhone is not paused. Try squeezing the headset microphone to resume playback. Additionally, from the Home screen you can choose iPod > Now Playing, then tap Play.
    Make sure the latest version of iTunes is installed on the computer that you are syncing the iPhone with (songs purchased from the iTunes Store using earlier versions of iTunes won't play).
    Try another Apple headset (some third-party headsets require an adapter to be used with original iPhone).
    Try a different song or video.
    Check to see if the iPhone alert sounds or other iPhone sound effects exhibit the same audio issues.
    Disconnect the headset from the iPhone and see if sound comes from the built-in speaker.
    Best of luck,
    Mario

  • After upgrading IO5 speaker not working

    Please advice how to resolve speaker problem after upgrading to IO5, speaker not working and volume bar is missing too.

    What Troubleshooting Steps have you tried...
    The Basics are Restart... Reset... Restore
    Reset your phone:
    Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
    iPhone Reset
    http://support.apple.com/kb/ht1430

Maybe you are looking for

  • Installing on mac mini without cd

    Greetings, everyone! So i've been trying to install Arch on intel mac mini. The problem is booting the installation image. 1.I can't manage it through the cd as it seems to be broken (auto ejecting every disk i insert into). 2.I've tried booting from

  • Barcode using api

    Hi, I'm trying to solve problem with showing barcodes when generating html or pdf documents using api. I have function in db which generates barcodes 128b with correct start, control and stop chars, I've tested it notepad, using font AdvC128b, printe

  • Is there "Interface Type Node" present in WD JAVA as in WD ABAP ?

    Hi, Experts, As i have gone through WD ABAP in that i found  "Interface Type Node"  under Context tab  but i have a dought is that type "Interface Type Node" is present in WD JAVA or not.If not why and its use ? Thank You, Shabeer Ahmed.

  • How do I mark audiobooks as played?

    Hiya, Have created a smart playlist for audiobooks that I haven't listened to. However since a restore of my library, most of them are showing up. Is there a way to mark audiobooks as listened to, just like music/tv shows etc? Thanks

  • Dynamic generated content

    hello can somebody help me with adobe air + html how to make link to open in system external web browser in dynamic generated content?