IPhone 4S bricked after 6.1 update - iTunes errors 21/1611

Yesterday my iPhone 4S asked me to install the iOS 6.1 update (via the Settings.app) "over the air". After downloading and preparing the update, the iPhone rebooted itself to start the update process.
Unfortunately, this is where it all went wrong. It seems like the iPhone update failed somewhere along this process. It is now stuck in "Recovery Mode", with the picture showing me to connect the phone to iTunes.
I have tried countless times restoring the phone via iTunes, on 4 different computers, and on Windows 7 and OS X.
Nothing works. The restore process fails during the "Preparing iPhone" phase.
Here's what happens every time:
I can see the phone being restarted.
The Apple logo shows up, and a little wheel in the bottom of the screen starts spinning
As soon as (usually even before) the progress bar shows up on the phone, the device suddenly shuts down
The iPhone reboots right back into recovery mode, asking me to connect to iTunes
I'm quite desperate at this point. I have followed all steps imaginable (including turning off Windows firewall and antivirus software), but even then the restore still won't complete. iTunes always gives me the same error: 1611.
When putting the phone into DFU manually, it gives me another error: 21.
Both seem to point to third-party security software interfering with the restore process.
However, having tried this on 4 different computers, I am 99% sure that this is not the issue. So far I've tried:
HP Laptop - Windows 7
Asus Desktop - Windows 7
2010 Macbook Pro 15" - OS X Mountain Lion + Windows 8 (Bootcamp)
2010 Macbook Pro 13" - OS X Mountain Lion
Also, I should mention that in Belgium there aren't any official Apple Stores where I can book an appointment at a Genius Bar. Is this 4S doomed?

@Hasan123
Hasan123Unfortunately I wouldn't be able to downgrade to lower iOS versions even if I managed to get a restore going...
@kefo68
Check your hosts file in Windows / OS X. This guide might help solve your problem: http://jaxov.com/2011/03/how-to-fix-itunes-error-3014-while-restoring-firmware/
@wuzi36
I have already tried restoring the phone on my Macbook Pro running Windows 8 Pro, with the latest version of iTunes, but unfortunately the same errors still pop up...
@Lawrence Finch
Antivirus and firewall are off, access to the Apple update verification servers is not the problem...
@.tomaZ
Errors 1611 (in recovery mode) and sometimes 21 (when restoring in DFU mode).

Similar Messages

  • TS1424 trying to restore my ipad 2 after attempt to update itunes  error 3014

    i have 16 gb ipad 2 but store lots of music from itunes and photos on it far too much i guess so i just bought £25 FOR ICLOUD and left it transferriing data last night come to look at ipad this morning it but got message on mainframe computer update would not do it system error 3014 then  "detected an ipad in recovery mode. i tmust be restored before it can be used in itunes.
    i click restore but get message IPAD in recover mode ITUNES is preparing to restore the software on this ipad. then get message error 3014
    now ipad just shows connection lead on screen and on computer screethe message 3014

    There is some troubleshooting for error code 3014 on this page : http://support.apple.com/kb/TS3694
    This error occurs when iTunes is unable to reach gs.apple.com in a timely fashion. Follow the steps below in Unable to contact the iOS software update server gs.apple.com.
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • IPhone 4 Bricked after updating to iOS5

    So, the day iOS5 update came out for the iPhones/iPods/iPads I was egar to get it downloaded to update my software on my iPhone 4. I noticed they had an update for iTunes so I went ahead and updated my iTunes before I started updating my iPhone 4.  After waiting for my iTunes to update, I then downloaded the new iOS5 update...ran a backup on my iPhone 4. After I updated iTunes, downloaded the new iOS5 and backed my phone up, I then plugged my iPhone 4 to my computer to run the iOS5 update...the update successfully updated. I used it for 2 days working perfectly. When I was traveling last Saturday, I pulled the notification center down to check all my notifications and my screen turned off.  I've tried to hard-reboot it...everthing, it had completely bricked on me! I noticed that my screen was still on, but it was black. I then plugged my iPhone 4 in to iTunes and iTunes recognized my phone for about seconds then an error message popped up saying that iTunes can't recieve any data on my iphone becasue there is an error. I called apple and they said bring it in...I'm just wondering if anyone else is experiencing this problem? Or does anyone know a solution besided taking it to apple? Any help would be much appreciated! Thank you, Justin!

    Connect your iPhone to iTunes. If it doesn't come up in the sidebar for a good amount of time, start holding the power and home buttons. Count down from 10. Then, release the power button and coninue holding the home button for up to 30 seconds. If it doesn't come out of recovery or DFU (which can sometimes make it appear bricked), continue this process. KiltedTim's answer is also helpful and can sometimes take care of this problem.

  • After all the updates (itunes 10.6, iphone 5.1, and iphoto) all my photos are suddenly being synced with my iPhone.

    After all the updates (itunes 10.6, iphone 5.1, and iphoto) all my photos are suddenly being synced with my iphone. Before I was able to pick the "last 12 months" or last import, or certain album. Now everything is greyed out?

    After deleting files, there does not seem much improvement on the disk space.
    Felicia,
    Download Omni Disk Sweeper: it is free now and will list your files and folders sorted by size.
    But don't get carried away and sweep and delete anything that you do not know what is is required for:
    http://www.omnigroup.com/products/omnidisksweeper/download/
    I recovered from time machines's backup harddisk
    Time Machine may be using the disk space - if you have Time Machine enabled and not the backup drive connected, TM will make local snapshots, if you have free disk space. See Pondini's webpage for more information: Time Machine - Questions 30. What are Local Snapshots?
    I disable these local snapshots on my portable macs, to be sure, how much space really is free.
    Regards
    Léonie

  • IPhone 4.0.1 unable to update iTunes/AppStore Billing Information (county)

    +*iPhone 4.0.1 unable to update iTunes/AppStore Billing Information: Prevents Purchasing/Installations*+
    ++When accessing the AppStore I am prompted to update my iTunes billing information. This process generates a loop when selecting the county and will not update. This prevents purchases or free downloads from the AppStore.++
    Details:
    +I have a new iPhone 4. When I received it I activated the phone, restored from back-up and updated the software to 4.0.1. After the software update was complete I tried to install Free and Purchased applications from the App store. I cannot install any free or purchased iTunes application, music, or video.+
    +*I received the following messages:*+
    *[Verification Required]*
    +Before you can make purchase, you must tap Continue to sign in, then verify your payment information.+
    Cancel (Continue)
    *[Sign in Required]*
    +Tap Continue and sign in to view billing information.+
    Cancel (Continue)
    *[iTunes Password]*
    +Apple User [email protected]+
    Password
    Cancel (Ok)
    [Account]
    Cancel (Done)
    +Credit Card:+
    +Card Number:+
    +Security Code:+
    Month:
    Year:
    Salutation:
    +........ More+
    +*I re-entered all information*+
    *[Address Verification]*
    +County information is required to calculate the applicable sales tax on your purchases. Choose the county where your billing address is located.+
    County:
    Cancel (Done)
    I select the county and select done the screen loops for the county information.
    *Things I have tried:*
    - Updated billing information via iTunes on the Mac (Updates successfully) - but will still prompt for updates on the iPhone.
    -Restarted iPhone (same)
    -Erased iPhone and activated as new without restoring from backup (same)
    -Contact iPhone support (no other advice then what happened here the first time) the second attempt at support has resulted in a call with iPhone and iTunes Support.
    I will post back my findings, but has anyone found a solution.

    The only difference I noticed was that the card that kept looping was a visa check card, verse a credit card (mastercard). I am not sure if there is a problem within the iPhone application. I don't believe this to be an iTunes or App store problem because the account profile will accept the card information via a computer. This problem seems to be within the address verification process the iPhone/app store does only on the iPhone platform. Apple support and iTunes support seems to be clueless. My original post is the only way I've gotten it to work.

  • After the last update iTunes no longer works...  "This application failed to start because MSVCF80.dll was not found.  Re-installing the application may fix this problem"  I tried and it did not fix the problem?

    After the last update iTunes no longer works...  "This application failed to start because MSVCF80.dll was not found.  Re-installing the application may fix this problem"  I tried and it did not fix the problem?

    Click here and follow the instructions.
    (99061)

  • TS3694 I am unable to view My Wish List on the ITunes Store After installing the updated ITunes. It shows an Error -1202 and says try again later. But it never works.

    I am unable to view My Wish List on the ITunes Store After installing the updated ITunes. It shows an Error -1202 and says try again later. But it never works.

    Hi Jen.  My daughter just compleated her nursing program and is now working as a full time nurse.  Focus and study hard and soon you will be there too.  Now to the problem at hand.  I have the same problem.  I gave up on it and satisfied myself with my iPod without the upgrade.  Reason being I've read so many posts of people having problems after the upgrade.  But I'm sure other factors are involved.  Nevertheless here is the fix most say works to solve the problem:  What ever virus protection you have installed on your computer, disable it.  Then try to install the update. After that enable the protection. I had Kaspersky, and it does it's job well. The thinking is, the virus protection is blocking the upgrade.  Hope this works.   Charlie

  • TS3694 after trying to update itunes I got an error MJVCR80.dll  Does Apple have a fix for this?

    After trying to update itunes, I got an  MJVCR80.dll error,
    does anyone know how to fix this?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I can't seem to install flash player on iPhone or MacBook after snow leopard update...why??

    I can't seem to install flash player on iPhone or MacBook after snow leopard update...why?? How can I fix this?

    Flash Player doesn't work on IOS devices.
    On Macbook, try un-installing and then re-installing.
    Adobe Flash Uninstaller
    Adobe Flash Player

  • Msvcr80.dll after trying to update itunes how do i fix?

    After trying to update itunes I keep getting the message 'msvcr80.dll is missiing'.
    What do I need to do to fix this?

    Click here and follow the instructions.
    (98896)

  • Il"ia un error sur mon Iphone 3G pendant ma mise a jour Itune error n 1601  merci

    l"ia un error sur mon Iphone 3G pendant ma mise a jour Itune error n 1601  merci

    Has your phone been jailbroken before you tried to update the software? If yes, this could be the reason for the error and the jailbreak has damaged the phone.
    Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues

  • I can't update itunes, error message comes up, can't update the older version of bonjour contact your technical support

    I can't update itunes, error message comes up, can't update the older version of bonjour contact your technical support

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • After 9.3 update getting error printing to Adobe PDF while converting from Powerpoint to PDF

    That happened after upgrading Acrobat Pro 9.1.2 to 9.2->9.3 on Windows XP sp2 platform. Converting from other Microsoft Office 2003 products is totally normal(Excel, Word) Did anyone came accross and know how to fix that?? We have many users with exactly same issue.

    thanks...figured out my problem!
    Date: Wed, 3 Feb 2010 12:24:29 -0700
    From: [email protected]
    To: [email protected]
    Subject: Re: After 9.3 update getting error printing to Adobe PDF while converting from Powerpoint to PDF
    What happens if you try to print to the Adobe PDF printer?
    >

  • This is my iphone 4  ECID: ********, now restore or update showing error code 1 what can i do now?

    this is my iphone 4  ECID: ******, now restore or update showing error code 1 what can i do now?

    From the article:
    Error 1 means that your device or computer may have a hardware issue that's preventing the update or restore from completing.
    1.Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
    2.Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    3.Confirm that your security software and settings are allowing communication between your device and update servers.
    4.If you still see the error message when you update or restore, contact Apple support.

  • New IPhone is a Brick - after new Software Update

    Last night I synced my new IPhone 3G that I got this past July after lining up for 2 hours. Love it! However, it's been turned into a brick.
    I synced with iTunes 7, using the correct cable with no dock, and it mentioned that there is an update for the iPhone software (2.1). So, duh, I applied it.
    When it was done, the phone was dark, so I started it and got the image of the usb cable and a iTunes image, and iTunes said:
    "iTunes must check the iPhone software update server to identify this device..."
    I clicked "check"
    "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes"
    I clicked "ok" - then clicked "restore".
    "Automatically checking for iTunes and iPhone updates is disabled. Would you like iTunes to check for a new iPhone software update?"
    I clicked "check".
    "Are you sure you want to restore the iPhone "iPhone" to his factory settings?...."
    I clicked "Restore and Update"
    "extracting software....preparing iPhone for restore...."
    "the iPhone "iPhone" could not be restored. An unknown error occurred (13)."
    TOAST
    I loved this phone, and now it's a brick!
    Will apple help?

    I had a similiar issue last night when upgrading my just purchased iPhone to 2.01. Itunes downloaded the new update but during the install I received a message stating "the iPhone "iPhone" could not be restored. An unknown error occurred (6)." I tried this 4 times and got the same results. My iPhone had a dark screen with icons of a cable and itunes on it. Well I called apple support waited for 30 minutes to get to a techinican. After explaining my issue he put me on hold for another 15 minutes then I mysteriously was transfered to AT&T. I was hot to say the least. I WAS able to fix this on my own. I originally was using an imac with iTunes 7.71 on it. I had a PC laptop with iTunes 7.70 (not 7.71). I plugged the iPhone directly to the PC (Not a USB hub). I was successful with the upgrade doing this. I upgraded 2 other iPhones that day and received the error 6 code. But after a second try they went through. I think there is an issue with iTunes 7.71 causing the failures during updates. Try to get your hands on a copy of iTunes pre 7.71. And ensure you are connecting the phone directly to the computer.

Maybe you are looking for

  • After transfering my music from my computer (windows7) i cant open my apps like facebook and skype etc

    after transfering music from Itunes on my computer (windows7) I can't open my apps like facebook or skype

  • GR of subcontracting items without issuing  components

    Hi all I am facing a problem regarding subcontracting. In a PO of material X  (item category L (subcontracting)) of required quantity 10, a component Y quantity 50 to make X is to be given to the vendor. The problem I am facing is that I am able to p

  • Brand new N73 is frozen solid

    I have resently purchased a new N73 from T-Mobile (through contract ) . Unfortunately after 5 weeks the phone is now frozen . All I get when I switch the phone on is the back-light and the blue nokia symbol . Also , clock and date is working and show

  • Receive Emails in Apex

    Hi everyone, Is there any way to receive emails directly into the database using apex? Thank you, Alex.

  • Changing the locale

    Hi. I've got Arch setup pretty nicely, just my timezone and so forth is set to US when i'm in the UK. I've done a little digging and can't really see how to change timezone/input locale. Any ideas?