Iphone 4s cant turn on after try using camera
hei guys,
i have problem, my iphone cant turn on after using camera
my phone is dropped in pool for awhile, and i take it
i dry it, and work perfectly well
and after 1 day, i try using camera, and suddenly my phone is dead
when i try to recharge its alywas appear apple logo for 1-2 sec, and after that is dead again, its repeat everytime i charge
i wanna reset my phone, but cant,
i try to connect i-tunes, its still cant
any idea what i do next??
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Similar Messages
-
IPhone will not turn on after Sleep during Camera app.
Over the last two months, my iPhone has refused to turn on 4 times. In each of the cases, I was using the Camera app and pressed the sleep/wake button while still in the app.
In all cases, I was able to reset the phone (sleep+home for 10 sec.) However, what really bothers me is that two of the times, the battery was fully drained (from about 85% in about 4 hours). I have a feeling the Camera app is still running even though the screen is dark and unresponsive.
I have tried unsuccessfully to replicate the problem intentionally.
Does this sound like a HW or SW issue? Has anyone else experienced this problem?This happened to me just last night. I was looking at photos (as opposed to taking them), left the photo showing and let phone sit on the table until it slept... it just didn't wake. Thought it was a battery issue (I was down to about 30% remaining), but connecting to power did not wake the phone. Plugged in overnight, but nothing changed, and no battery charging took place.
Power+Home restart did wake it this morning, but this was a bit disconcerting to say the least. I'm almost hesitant to want to replicate the behaviour.
FYI, I spent the weekend taking pictures using Camera, then putting it to sleep until the next picture. iPhone always woke fine, but after using Camera to view the pictures last night it didn't wake up.
Andrew -
my iphone 6 wont turn on after i updated it and it doesn't work to restore it in itunes. what should i do?
Hello ole-gunnar,
Thanks for using Apple Support Communities.
If your iPhone is unresponsive after updating your iOS version, then I'd like you to please follow the troubleshooting below.
If you see a black screen
You might need to charge your device before it can turn on. Plug in your device and let it charge for at least 10 minutes (20 minutes for iPad), then try turning it on.
You should see a battery icon while your device is charging. If you continue to see a black screen, reset your device. If your device doesn't respond when you press buttons
Your device might not return to the Home screen when you press the Home button, wake from sleep when you press the Sleep/Wake button, slide to unlock or power off, or it might appear frozen. Try these steps:
Restart your device.
If it still doesn't respond, or if it doesn't turn back on, reset your device.
If your device gets stuck during startup
When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
Get more help
If you still need help after trying the steps above, contact Apple Support.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Cheers,
Alex H. -
My iPhone 5 wont turn on after i tried to update from 6.1.3 to 6.1.4.
my iPhone 5 wont turn on after i tried to update from 6.1.3 to 6.1.4. My Phone refuses to turn on. i bought my iPhone from someone else and i don't know if the warranty is voided, how can i find out if is voided ?
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
My iphone 4 wont turn on after hours of charging, normally i would press the lock button and home button together but my lock button stopped working afue weeks ago. Help!
Hello Kimbo1991,
It sounds like your phone is not successfully booting even though you have reset the device. I would next recommend attempting a backup and restore to iTunes with this article:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
If you are unable to restore with iTunes I would next put the device into recovery mode, and attempt the restore again:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Thank you for using Apple Support Communities.
Regards,
Sterling -
IPhone 5 keeps turning off after battery replacement
iPhone 5 keeps turning off after battery replacement. After 10 minutes or so, the phone freezes and shuts off, can't even use it anymore.
Hi there Luke811813,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
1.Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
2.Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
3.Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
4.After at least 15 minutes, if:
•The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
•The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
•Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
5.If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
•If the display turns on, go to step 4.
•If the display remains black, go to next step.
6.Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
7.If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W. -
I need help I tried to use cloud backup on my iPhone 5.0.1 and after all my camera roll pictures are blurry and videos canot be played messege says URL not on this server ! Please help!!
iPhone 4S, iOS 5.0.1Try updating to iOS 6.1.3.
-
HT1338 iphone 3gs cant be activated after software update to ios5
iphone 3gs cant be activated after software update to ios5
What does it say when you look at Settings=>General=>About=>Carrier?
Which version of Cydia is on your iPhone - the one with the black & white
icon or another one? What color is the Cydia icon? -
my iPhone is not turning on after i did click on resting option and i can't even turn it off because my power button is compressed please help
Amrit M wrote:
my iPhone is not turning on... my power button is compressed
Looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required...
Be sure to make an appointment first... -
IPhone won't turn on after attempting to restore!
My iPhone will not turn on after trying to restore it it starts to boot up fine then it goes back to the black screen and it keeps doing this please help!
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).
-
I need help I tried to use cloud backup on my iPhone 5.0.1 and after all my camera roll pictures are blurry and videos canot be played messege says URL not on this server ! Please help!!
What is it you are trying to do? Restore an iCloud backup? Back up to iCloud?
-
My iphone won't turn on after recent update
My iphone won't turn on after recent update. How do I fix this?
2 more options:
Restore from backup
Restore as new
http://support.apple.com/kb/HT1414 -
Iphone does not turn on after update to ios 7
My iphone dies not turn on after update to ios 7
it keeps showing the message : (connect to itunes)What type of computer do you have?
Were you updated to the latest version of iTunes?
You may need to follow these steps:
http://support.apple.com/kb/TS3281?viewlocale=en_US
Good luck! -
Help! My iPhone 5 wont turn on after battery died. iPhone is not reponding to charger or anything I have tried... Hard reset is not in option beacuse iPhone is turned off.
Your only chance is letting it charge for about 10min, then connecting it in recovery mode, explained here:
http://support.apple.com/kb/HT1808
If it does not charge at all, you'll have to get it serviced by Apple. -
My iphone will not turn on after I replaced the battery
My iphone will not turn on after I replaced the battery, itunes logo comes up, but it will not connect and does not reset! does anyone know what I can do?
Who replaced the battery, you, Apple or an Authorized Apple Service Provider? If you did it yourself, then you could have done anything to disable it. It also voids any warranty and post-warranty support from Apple and the forum. You are on your own. If Apple or an Authorized Apple Service Provider replaced it, then take it back and have them check it.
The iPhone does not have a user replaceable battery, or user serviceable parts. It is meant to only be serviced by Apple, or authorized service providers.
Maybe you are looking for
-
Is it feasible to set up 21 unit hotel with Mac Mini's in each room?
I am building a 21 unit condo hotel in Mexico, and want to have mini's in each room connected to 42" HDTV, the features I want are 1. WiFi using "share internet" 2. Skype installed for calls 3. iChat for communicating with the front desk, restaurant
-
New USB not working in new macbook pro. What do I do?
I have just bought a brand new 16 GB USB stick for use with my 2 month old macbook pro. My mac is not recognising the presence of USB stick but I have checked and the USB works in the other family laptop which is a Toshiba. I have used other USB's wi
-
Getting the name of the window under the mouse cursor
Hello All Is there a way to receive a window name of the window under the mouse cursor? All windows in interest are LV windows, and all of them works separatelly. After the mouse click I would like to get the window name. The reaso nfor asking is tha
-
Averages Incorrect in Interactive Report
I have a BI report with one SQL statement in the data model. I have two bar graphs, one with SUMS and the other with AVERAGES. The Sums graph shows correctly but the averages are incorrect. when I export or view in pdf format the averages are correct
-
This has only happened recently. I search for songs in my itunes library, search finds them but I'm not able to paly them once they've been found. if I want to play a specific song I need to select it manually. Anybody have this issue too?