Iphone 4s configured for exchange 2010 rebuilds inbox

My iphone 4S keeps rebuilding the inbox multiple times per day. no events in the exchange server logs. this happen on wi-fi also.
can this be the resync timeout value that the ios 4 suffered with?
Thank You

I have the same problem on mu iPhone 4S, running iOS 5.1 .
I have 4 exchange profiles on my iPhone, but it's only the gmail account (which has been set up as exchange push) that rebuilds his inbox x times a day.
It's only since a couple of weeks, before it worked perfectly.

Similar Messages

Configuration for LDAP IP Address and Port for Exchange 2010

Let's say Exchange 2010 is installed on a computer that is joined to a domain. However, I would like to redirect LDAP authentication to another IP address and another port like how sharepoint implement it below
http://sharepoint.stackexchange.com/questions/33540/ldap-authentication-connection-string
Is it possible to do the equivalent for Exchange 2010?
Note: I would like to do this without installing any Edge Transport server or Microsoft Forefront TMG

The question I would need to ask is "Why would you need to do this?" I ask because Exchange requires an Active Directory account for authentication. That account may have permissions from some other directory (as in a linked mailbox),
but the account is used to find it. For SharePoint, you can authenticate to other directories directly.

Mails blocked in queue the moment forefront for exchange 2010 started

Hi,
We have newly installed Forfront protection 2010 for Exchange 2010 installed in our exchange 2010 Edge Server.
Mails got struck in the Queue immediatly after the forefront installations.
Mailflow works properly one we unhook the forefront from Exchange.
need to enable the forefront. Got struck in these. How to proceed up further.
Thanks,
Pradeep

Hi,
Please compare your configuration with the following blog or video. These might help.
http://araihan.wordpress.com/2010/03/15/forefront-protection-2010-how-to-install-and-configure-forefront-protection-2010-for-exchange-server-2010step-by-step/
http://www.youtube.com/watch?v=b2BgTmeXwUs
(Note: Microsoft provides third-party contact information to help you find technical support. This contact
information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Exchange Server 2013 OAB Web Distribution Configuration in Exchange 2010 & 2013 Coexistence.

Hi,
We have OAB Issue for Exchange 2010 Users in our Organization.
We have Exchange 2010 and Exchange 2013 Coexistence.While Checking in Exchange Server 2010 Server OAB properties in Org Configuration--> Mailbox-->OAB Properties -->Distribution we are not seeing any CAS servers and Its Grayed Out.
Please let us know How to add Exchange 2010 CAS in Exchange 2013 Web distribution.

They made alot changes with the OAB in Exchange 2013, and it doesn't really function in the same manner as it did in 2010. It might be best to take a look at the following blog posts from the Exchange Team, they should give you a better understanding
on how it works and how to manage it going forward.
http://blogs.technet.com/b/exchange/archive/2012/10/26/oab-in-exchange-server-2013.aspx
http://blogs.technet.com/b/exchange/archive/2013/01/14/managing-oab-in-exchange-server-2013.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Disater Recovery for exchange 2010 plan in Cloud computing

Hi
We are using exchange 2010 for our messaging solutions. Please find below our current setup.
mainsite: MBX Server --- 1no --> Hyper V host
                Hub&Cas ----- 1No --> Hyper V Host
                Edge ---- 1NO --> Physical
DR site : MBX,Hub&CAS -- 1No --> Physical
               Edge   --- 1no --> physical
we enabled the DAG for our Mail box server and its replicating through a point to point link between our main site with DR site.
Now we are interested to enable   our DR (disaster recovery) in MS cloud. Please let me know the process to go further .
how will the DAG or DB replicate to DR Site in cloud?. how its works?
much appreciated if any body have this setup .
Best Regards
Jagadeesan.S
O
Jags

Hello,
Kindly find the 3 types of plan for Exchange 2010 DR site. You can check all 3 plans and select as per your requirement.
1. Rebuild an Entire Database Availability Group plan
http://technet.microsoft.com/en-us/library/gg513521.aspx
2. Site Resiliency in Exchange 2010
http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/planning-deploying-testing-exchange-2010-site-resilient-solution-sized-medium-organization-part1.html
3. Exchange 2010 Cross Site DAG Disaster Recovery: Data Center/AD Site failure Part 1
http://msexchangeguru.com/2012/10/25/exchange-2010-dag-dr/
Deepak Kotian. MCP, MCTS, MCITP Exchange 2010 Ent. Administrator

Uninstall Forefront for Exchange 2010

I have acquired another spam filter appliance that will used instead of Forefront for Exchange 2010.
How do I uninstall Forefront for Exchange 2010 without any issues while still using Exchange 2010.
Basically the email will go through the email appliance filter then to Exchange. I want to deactivate or uninstall Forefront for Exchange with impacting my email services. Is it as simple as just uninstalling it?

Hi,
About uninstalling Forefront for Exchange 2010, you could check the following article.
If spam filtering was enabled, the configurations in the corresponding antispam settings in Microsoft Exchange that were leveraged by FPE will be retained by their Exchange antispam counterparts after FPE is uninstalled. These settings include: Connection
Filtering, Sender ID Filtering, Sender Filtering, and Reciepient Filtering. To change these configuration settings you will need to modify them through the Exchange management console.
Uninstalling Forefront Protection 2010 for Exchange Server
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to test if Spam protection with Forefront for Exchange 2010 works

Hi there.
Installed forefront for exchange 2010 on Exchange Edge server.
We have tested virus protection with creating EICAR, but the question is, is there a way to check if SPAM Works fine, and how to?
with best regards
bostjanc

Hi bostjanc,
Since this is an issue on the Forefront side, I suggest ask Forefront Forum for help so that you can get more professional suggestions. For your convenience:
https://social.technet.microsoft.com/Forums/forefront/en-US/home?forum=FOPE
However, based on my knowledge, use the EICAR antivirus test file is the only built-in method to check whether the Anti-Spam configured correctly.
You can try to send some test spams to your Exchange server for testing, even if this is a stupid method : )
Thanks
Mavis Huang
TechNet Community Support

Disater Recovery for exchange 2010 plan.

Hi All,
Happy New year 2014 ....
we have running with exchange 2010 R1 with DAG enabled. we have below mentioned setup in our exchange server.
Main site.
Active directory server ( Primary DC, additional DC in our main site) installed in Hyper V host. installed exchange 2010 mail box role in another Hyper V host. installed the CAS& Hub role in another virtual host and installed the Exchange
edge role in another physical server.
DR Site
Active director server( ADC) installed in Hyper V host. installed the Exchange 2010 mailbox,Hub,Cas server role in a physical server. installed the Edge Server in another physical server.
At present we have enabled the failover DAG for both our Mail box servers and its working perfectly when the primay mail box server down. we have run some commands to transfer all my exchange 2010 to point through our DR Site. so its take
some of the minutes of down time happened in our mail flow. we are planning to avoid that downtime. we are find for the solutions like if the primary site down the DR will need to automatically up. it will be appreciate that any
one provide your suggestion to achieve this without affecting the our current setup.
Jags

Hello,
Kindly find the 3 types of plan for Exchange 2010 DR site. You can check all 3 plans and select as per your requirement.
1. Rebuild an Entire Database Availability Group plan
http://technet.microsoft.com/en-us/library/gg513521.aspx
2. Site Resiliency in Exchange 2010
http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/planning-deploying-testing-exchange-2010-site-resilient-solution-sized-medium-organization-part1.html
3. Exchange 2010 Cross Site DAG Disaster Recovery: Data Center/AD Site failure Part 1
http://msexchangeguru.com/2012/10/25/exchange-2010-dag-dr/
Deepak Kotian. MCP, MCTS, MCITP Exchange 2010 Ent. Administrator

Critical event Ids for exchange 2010

I need a list if critical event ids for exchange 2010 which should be monitored regularly. So that a script can be scheduled to report if in case any of these event ids are encountered. I have complied a list below and request you guys to add on this list.
Event ID Message
1004 Unable to start the Microsoft Exchange Information Store. Disk is full.
1022 Database is damaged. This means that online backup cannot complete because the database is damaged.
1034 The disk associated with cluster disk resource driveLetter could not be found. The expected signature of the disk was diskSignature.
5001 Unable to initialize the Microsoft Exchange Information Store service. Disk is full.
9518 Error 0xfffffb40 starting Storage Group /DC=COM/DC=TEST/CN=CONFIGURATION/CN=SERVICES/CN=MICROSOFT EXCHANGE/CN=MICROSOFT/CN=ADMINISTRATIVE GROUPS/CN=AG1/CN=SERVERS/CN=SERVER1/CN=INFORMATIONSTORE/CN= FIRST STORAGE GROUP on the Microsoft Exchange Information
Store.
9555 Corrupt Message detected during MoveMailbox. Fid = folder id; Mid = message id; Some or all properties of this message will not be moved correctly.
9559 The log disk is full for storage group "name". Attempting to unmount all databases in this storage group.

Hi Striker11,
Thank you for your question.
I agree with Martin. We should find a tool to monitor those errors or warning. Because there are many Event IDs in Exchange 2010. If those errors or warnings are both important for Exchange maintenance. If Exchange 2010 update to Exchange 2013, we will still
use tool to monitor it and not modify the script.
We could download SCOM by the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=2268
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Rollup 6 for Exchange 2010 SP3

Does anyone know when Microsoft is going to release either Rollup 6 or a patch for Exchange 2010 SP3? Rollup 3 for SP3 introduced the following issues:
“Some users (not all of them) report that they don't see new emails in their Outlook 2010 box on Shared folders, even though they got the new email message envelope. When they change folder and back to the Inbox the new mail is suddenly visible. Same sort
of "delay" happens when users mark a message for follow-up or try to change a message from unread to read.”
We have installed Rollup 5 but it did not address the issue.
Thanks
Dave

Hi,
Currently, there is no official document about the release of RU6 for Exchange 2010 SP3. If the RU6 for Exchange 2010 SP3 will be coming, you can find this information in the Exchange Team Blog.
http://blogs.technet.com/b/exchange/
Thanks for your understanding.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Rollup 8 for Exchange 2010 SP2 causes EWS error with bad parameter for Exchange.MailboxReplicationService.ProxyService

When I installed Rollup 8 for Exchange 2010 SP2 it caused an error in EWS
EWS failed with the error:
exchange web service could not load file or assembly Exchange.MailboxReplicationService.ProxyService bad parameter
When I uninstalled the rollup all worked fine again.
Any ideas, Thanks in advance?

Hi,
To apply this update rollup, you must have Exchange Server 2010 SP2 installed. And remove all interim updates for Exchange Server 2010 SP2 before you apply this update rollup. Please check your installation deployment by the following article:
Install the Latest Update Rollup for Exchange 2010
http://technet.microsoft.com/en-us/library/ff637981.aspx
Description of Update Rollup 8 for Exchange Server 2010 Service Pack 2
http://support.microsoft.com/kb/2903903/en-us
If all requirements and preparations are configured properly, please collect your error logs to check your installation. It would be helpful to post some event logs here for further analysis.
Thanks,
Winnie Liang
TechNet Community Support

Configuring NLB Exchange 2010

Our environment only has one CAS/HT server. No NLB Array was configured. I wanted to verify the steps on getting this properly configured:
Build and patch NEW server – server 2010-2.
Install Pre – Requests.
Install Exchange CAS/HUB server roles.
Rename current CAS/HT server from 2010 to 2010-1 and change IP.
Install NLB.
Create NLB Cluster – name cluster 2010 keep same IP of current CAS/HT server.
Add DNS entry for cas array – name to be 2010.domain.com IP of current 2010 server.
Check to make sure mailbox databases RPCClientAccess Server is pointing to CAS array 2010.domain.com
Thanks

Read this : http://www.kraftkennedy.com/blog/bid/102109/Configuring-NLB-for-Exchange-2010-CAS-Load-Balancing
Install new Exchange server, Create a CAS Array, Create NLB "VIP" IP, Configure NLB to include your 2 CAS/HUB Server, Do all your Exchange Shell commands to point RPC, ext to CAS Array, Point CAS Array.domain.com to point to the LB "VIP".
TEST
TEST
TEST
If its not working role back and see what steps you missed :)

How to set default website for exchange 2010

I'm unable to launch the Exchange Management Console, and then I read that it's necessary to set the default web site in a particular way, in order for Exchange 2010 Management Console to work:
http://social.technet.microsoft.com/Forums/en/exchange2010/thread/4d396628-3867-4c95-9541-e0eb021e0135
However, after setting up Sharepoint, I see that it has modified the default website, and I'd like to ask for specific settings on how the default web site bindings should look (for exchange). Could someone please advise what I need to do to correct it?
I'm having trouble interpreting what Mike Crowley recommends in the linked post above, in terms of actual steps to the site binding information (which won't mess up what exists).
Currently it says:
Type           port         ip address        binding information
net.tcp
808:*
net.pipe
net.msmq                                         localhost
msmq.formatname                            localhost
http            80             127.0.0.1
https          443            *
http           80              *
https          443            127.0.0.1
It seems the line for http on port 80 is *, which I guess is equivalent to 'all unassigned'. Is the previous http port 80 binding to 127.0.0.1 causing the problem?
But I'm also supposed to set a Powershell VDir in IIS. Can someone provide steps for that?

Regarding SharePoint on Exchange:
It was not allowed earlier, as documented here:
http://office.microsoft.com/en-us/sharepoint-portal-server-it/coexistence-and-interoperability-guide-for-sharepoint-products-and-technologies-HA001160777.aspx & here:
http://support.microsoft.com/kb/825505 but there doesn't seem to be anything more recent than this. I would work under the assumption it is not supported outside of
SBS 2011 (which I am not very familiar
with).
Mike Crowley
Check out My Blog!

How to do the hard recovery for exchange 2010 (No Restore.env generated)

enrollment:Windows server 2008 R2, exchange 2010.
I want to test the fundamentally of eseutil /cc
so I backup the exchange database by Using the Windows backup, then I restore the database, and no Restore.env be found.But I found I can run the
eseutil /r.
what's happened?
1,why No Restore.env generated for exchange 2010 in Windows server 2008 r2?
2,why I can do the soft recovery after the restoring the database?
3, how to do the hard recovery for this situation(No Restore.env )?
Please click the Mark as Answer button if a post solves your problem!

Hi Eric,
From your description, I would like to clarify the following things:
1. Before performing the restore process, we need to dismount the Exchange databases that we want to restore. If the database is still mounted, the restore process will fail. If the restore process doesn't succeed, Restore.env won't be generated.
2. It is because the log files are healthy, you can run Eseutil/r and perform soft recovery.
3. In your case, you can continue to perform the soft recovery.
For more information about hard recovery and soft recovery, here are some helpful threads for your reference.
Exchange Server Soft and Hard Recovery
http://technet.microsoft.com/en-us/library/aa996168(v=exchg.65).aspx
Exchange Database Recovery – Using eseutil commands (Note: It isn't from Microsoft, please pay attention to refer to it.)
http://msexchangeguru.com/2009/07/12/exchange-database-recovery-using-eseutil-commands/
Hope it helps.
If there any problems, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support
" If the restore process doesn't succeed, Restore.env won't be generated. "
thank you for you reply.The restore process succeed,otherwise I can't do the soft recovery after the restoring the database,but can't see the restore.env
Please click the Mark as Answer button if a post solves your problem!

Outlook 2007 Clients Cannot Access Free/Busy Calendar info. for Exchange 2010 Mailbox

Hi:
I have Outlook 2007 clients that cannot access Free/Busy Calendar info. for Exchange 2010 mailboxes. They receive error like "...you do not have appropriate permissions..."
If those same users logon to a machine running Outlook 2010 then they can view the free/busy info. of the other user's mailbox, so I believe the permissions are set correctly on the mailbox to allow the viewing.
Any insights are greatly appreciated!
Thank you!
Bob Herman IT Tropolis

Hi Herman,
As you said, it seems users have proper permissions on mailbox.
Please make sure users has Reviewer permission on Outlook 2007.
Please try to run Outlook 2007 under safe mode or re-create profile.
Also try to turn Outlook 2007 to Exchange Online mode from Cached mode.
Thanks
Mavis Huang
TechNet Community Support

Iphone 4s configured for exchange 2010 rebuilds inbox

Similar Messages

Maybe you are looking for