IPhone 4s connects and disconnects from Windows 8

Apologies if this has been asked before as i'm sure it has but I can't find a solution.
I have a new HP Compaq laptop using USB 3.0, when I connect my IPhone 4s to my laptop it connects and disconnects every seconds, I've looked in the device manager and can't find anything to do with Apple in there.
Has anyone found a solution to this?

Hello Aqib2024,
Thank you for providing the details of the issue you are experiencing with your iPhone 4s.  You have taken some really good steps to isolate the issue.  I recommend following the steps in the article below to further isolate and troubleshoot this issue:
iOS: Troubleshooting USB connection
http://support.apple.com/kb/TS1286
Thank you for using Apple Support Communities.
Best,
Sheila M.

Similar Messages

  • All iPhones constantly connecting and disconnecting from 2014 MacBook Pro with retina display

    So I have an iPhone 6, 4s, and 3gs, whenever I plug any of them into my MacBook pro they rapidly connect and disconnect. After about 20 seconds of doing this they trackpad and keyboard stop responding and won't be recognized until I restart the laptop.
    Just as more information I have used 5 or 6 different cables and it works fine with my LG G3 and every other usb device I use. I have iTunes updated to 12.0.1 and OSX updated to 10.10, and this has been happening for about 2 months or so. My iPhone 6 is running 8.1 but did this before, although with the first sync when I first got the phone it worked fine.
    Any information would be helpful
    Thank you

    I'm having the exact same issue with the new 2014 iMac 5K Retina i5. iPhone 5 and iPhone 5s both work flawlessly.

  • My iphone 4s connects and disconnects (repeatedly) when connected to my computer

    my iphone 4s connects and disconnects (repeatedly) when connected to my computer, it works perfectly fine when connected to regular chargers, everytime i connect it to my computer it shows the charging symbol and then disconnects and reconnects in less then a second, it will repeat this process forever unless disconnected, sometimes it works perfectly fine and most of the times it does the same thing, I know for a fact its not the wire because i recently bought an ipad mini with retina and its usb is new, it worked with the retina for a day or two and then it kept connecting and disconecting repeatedly, my computer is two months old and i have new hardware in that machine, is it a problem in the usb power fluctuation? i am currently using windows 8.1 and i need solutions, this is super annoying, all my other devices work perfectly fine with the usb ports, all my usbs (2.0 and 3.0) do the connecting and disconnecting sometimes it even works ,what is the problem?

    Hello Aqib2024,
    Thank you for providing the details of the issue you are experiencing with your iPhone 4s.  You have taken some really good steps to isolate the issue.  I recommend following the steps in the article below to further isolate and troubleshoot this issue:
    iOS: Troubleshooting USB connection
    http://support.apple.com/kb/TS1286
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Apple iPhone 4 keeps connecting and disconnecting from new Macbook Pro 13. What is supposed to be done?

    I have a windows desktop in my office and my iPhone 4 works pretty fine and gets charged and gets connected to the iTunes. However, I just purchased a new Macbook Pro 13 this Nov (2014) and I can't seem to connect my iPhone. it keeps connecting and disconnecting. its very annoying. i saw similar posts and threads but there is no resolution! please help

    Hi there ceaselesschat,
    Welcome to Apple Support Communities.
    The article linked below provides a lot of great troubleshooting tips that can help you resolve the issue with your iPhone 4 disconnecting from your MacBook Pro unexpectedly.
    iTunes: Resolve USB-related alerts - Apple Support
    Take care, 
    -Jason

  • IPhone 4s keeps connecting and disconnecting from my new Macbook Air 2013

    Ok I've been having this problem, I recently got an 11 inch Macbook Air 2013 and after I try connecting my iPhone 4s it keeps connecting and disconnecting every 1-2 seconds. I already check the community, I know this subject has been asked many times. Nothing worked out though. My cable cord must be fine because it works perfectly on my PC. I updated the OS and iOS to their latest firmware and still nothing. Whenever I try opening iTunes I get this message saying " iTunes could not connect to this iPhone. This device is no longer connected. " Please if anyone fixed this issue I would appreciate some help. Thanks in advance.

    I just solved it, I hope this helps everyone who is experiencing the same problem. Apparently the iPhone seems to charge normally and connect to iTunes if the iPhone battery is over 60%-70%. This must be a power issue the MBA has.

  • My ipod keeps connecting and disconnecting from the computer

    I've tried everything, first my ipod kept displaying the folder with the exclamation mark, then a couple of days ago started working again. It then wouldn't play any songs and just kept skipping. So I plugged it into my computer to restore it so I could start again. Now its displaying the folder with the symbol again, and just keeps connecting and disconnecting all the time so I can't do anything to it. Keep trying the ipod updater but says it cant mount ipod.
    Any ideas????

    Hello all,
    I've been experiencing the same problem, but have managed to get it sorted.... well sort of.
    As Jen's problem, I had the exclamation mark and after unsuccessfully trying to update etc decided to leave it out of frustration.
    A day or so later it started to work again, great!!!
    A few days of problem free use then I got the sad Ipod screen.
    After checking the website I've restored and I'm now a week later and still trying to get my music from Itunes onto my Ipod.
    The problem now, once again very similar to Jen's is that my Ipod only seems to connect to my PC for period of time and then disconnects, sometimes updating a few songs.
    I get different 'Unknown Error' messages usually -124.
    I've tried with both USB and Firewire connections and even when my Ipod disconnects it still charges, so it's not the port at fault.
    Can't help but think it's the actual Ipod which is causing me this hassle and musicless journeys!!!
    Any ideas?

  • Why does my iPad keeps connecting and disconnecting from the new late 2013 iMac

    Hi there,
    I've recently bought a new late 2013 iMac and ever since then I'm not able to connect my iPad 2 to it. When I do connect it keeps connecting and disconnecting  again and again for some reason. The cable is fine and I've tried it with other devices. Just wondered why this is and whether you guys can help me out.
    Thanks a lot!
    CitizenJohnny

    Hi,
    I had the same problem and just found a solution. I tryed restoring all content and settings on the iPad (Settings > General > Reset > Erase All Content and Settings). It took lots of time, however it didn´t work because when I connected the iPad and iMac the problem persisted.
    Then I thought it wasn´t an iPad problem but iMac OSX problem. So I searched the web for "Reinstall Mavericks" and found this http://support.apple.com/kb/PH13871?viewlocale=en_US&locale=en_US.
    It also takes like 6 hours with my internet speed. Next day I connected the iPad and everything is just fine.
    I described both processes because I don´t know if in the end the iPad reset helped in the solution.
    Hope that helps! good luck

  • Outlook keep connecting and disconnecting from exchange 2013

    hi, currently im having microsoft exchange 2013 in server 2012 standard. when i running my outlook 2007/2010/2013 , it will keep showing connecting and disconnected. once i restart microsoft exchange rpc client access and it will be working fine for temporary,
    around 10 min later and it will happend again, can advise?

    Hi,
    You can raise it via Regedit:
    http://technet.microsoft.com/en-us/library/ff477612(v=exchg.141).aspx
    Thanks,
    Simon Wu
    TechNet Community Support

  • Mini connects then disconnects from Windows Vista

    I recently upgraded to Windows Vista Premium, and my 80gig iPod connects and syncs no problem to iTunes 7. I also have a 4gig mini that when I plug in the USB cable, Vista configures successfully and I can see the iPod as a drive and in device manager, and all is well until I open iTunes. As soon as I open iTunes, the mini shows up, but then Vista says it disconnects, then it reconnects, then disconnects, over and over. Has anyone else had this problem with Vista and their Mini??? Anything I should try??
    4GB Mini   Other OS  

    I left it plugged in over night and there is no change... I actually have 2 Mini's and the problem occurs with both, but not with the new 80GB iPod.

  • Recover videos from iphone after cut and paste from windows explorer?

    From windows explorer Iphone Internal Storage, I used cut to transfer 2 big videos from iphone to windows, but the videos are corrupted now in windows, and no videos in iphone! There is any way to recover them? thanks...

    When you came across this case, you should be careful to recover Video on iPhone.
    1. Fish your iPhone out of the water as quickly as possible.
    2. Dry it off with a towel or something similar. If it is still on, turn it off immediately. Note: running power through wet electronics can damage them beyond repair.
    3. Remove the battery, SIM card etc off the phone. If possible, remove the rear glass panel too. Apple uses two special 5-point Pentalobe screws to secure the back.
    4. Grab a bowl and fill it with uncooked rice or you can also put your iPhone 5 in with a bunch of silica packets.
    5. Bury the iPhone in a bowl of rice and cover it up.
    6. Last step is: wait day or two.
    The google+ teach you how to recover video from iPhone: https://plus.google.com/106752978783334975190/posts/RL9EhQcLgEx
    After this, you may chech your iPhone, if it is damaged, you should recover lost file from iPhone, it may be recover, if you are lucky.

  • IPhone connect and disconnect every second when I plugged into my laptop

    Hi guys,
    My iphone 4s connect and disconnect every single second everytime when I plug it into my new laptop, Lenovo Y510P. I have tried 3 USB ports but none of them worked. I even disabled 2 Enhanced Host Controller (USB) and still it didn't work. When I disabled USB3.0 eXtensible host controller, the three ports didn't function at all. Can anyone help me please It charged up and successfully synced on my desktop but not this new lappy zzz
    Windows 8, iOS 7.0.2
    http://i.imgur.com/VQH2NN9.png

    Hi, imAshton. 
    Thank you for visiting Apple Support Communities.
    I would recommend the steps in the article below.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If the issue persists, try the remaining steps the attached article.
    Cheers,
    Jason H.

  • IPhone connects and disconnects for no reason.

    My iPhone 4 and iPhone 5s won't stay connected to my new (Jan. 2015) Macbook Pro Retina 13". It will continuously connect and disconnect from the computer (not physically). What can/should I do? Is this a hard drive/motherboard issue? I have tried multiple chords and phones and the only one that stayed connected was my iPhone 3.

    Could it be the text message reminder? It beeps twice (after the original time) to remind you.

  • Every time I connect and disconnect my iphone/ipad windows vista opens windows media player in the background.  It then hogs all of my cpu.  Does this happen to anyone else?

    I am running iOS 4.3.5 and this has been going on for months now.  I need to keep my task manager open to kill the task when I connect and disconnect my iphone or ipad.  It hogs all of my cpu, sometimes opening 2 or 3 windows media players.

    Sorry, just to confirm, I DID NOT ACTUALLY ANSWER MY OWN QUESTION!
    I replied to the previous message from my iphone and I managed to hit the link to "This has answered my question" by accident!
    I AM STILL LOOKING FOR A RESOLUTION TO MY ORIGINAL PROBLEM. CAN SOMEONE ALSO NIW TELL ME HOW TO GET RID OF THE GREEN TEXT TGAT SAYS TGAT MY QUESTION IS ANSWERED? That is a pain! It should at least ask you to confirm that your question is actually answered and you didn't hit it by mistake, like I did!

  • Since upgrading to Mavericks, I have been unable to sync devices (specifically ipad mini and iphone 4s) to my MId 2013 Imac . They wil rapidly connect and disconnect, and I'm unable to do anything with the device. This happens with both USB ports.  Any su

    Since upgrading to Mavericks, I have been unable to sync devices (specifically ipad mini and iphone 4s) to my MId 2013 Imac . They wil rapidly connect and disconnect, and I'm unable to do anything with the device. This happens with both USB ports.  Any suggestions?
    MacBook Air, OS X Mountain Lion (10.9.1)

    Obviously, syncing an iOS device with iTunes over USB is still supported in Mavericks. Calendar and contact syncing with iTunes is no longer supported. That has nothing to do with your problem.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Iphone 4: while talking, phone automatically switches onto facetime and at other times when talking the sound "beep beep" is heard and disconnects from call?

    Iphone 4: while talking, phone automatically switches onto facetime and at other times when talking the sound "beep beep" is heard and disconnects from call? Anyone know what is happening??

    Basic troubleshooting from the User's Guide is reset, restart, restore.  Has any of this been tried?

Maybe you are looking for

  • Error while deploying in SDM

    Hi all, I am getting an error while i try to deploy something in the SDM. The error is: "<b>Cannot login to the SAP J2EE Engine using user and password as provided in the Filesystem Secure Store. Enter valid login information in the Filesystem Secure

  • How do I catch the button click event from toolbar for my JSP?

    I am using JDev 3.2 and BC4J for my JSP. I am using data web bean methods to create my JSPs. I need to implement a master-detail relation in my JSP. Currently I put my master browser as the top frame of JSTabContainer bean and put my 6 detailed table

  • Short dump with error RSW_CURRENCY_TRANSLATION while loading SRM data

    Hi All, I am loading data from SRM to BW. From data source 0BBP_TD_CONTR_2 to DSO 0SRCT_DS1. Data is loaded from source to PSA. When loading from PSA to DSO using DTP, I am getting a short dump with below error. Can one please let me know solution if

  • How to do a FFT tranformation for every file in a folder of another folder?

    Dear all, I have a folder A, there are seven folders in folder A, I call these seven folders B. and there are 100 files in every folder B. These files are all the data information of current. ok, now I need to transfer every current file into a FFT t

  • IDOC_INPUT_ORDERS with error message RV45A-VBAP_SELKZ (2) is not input fiel

    Hi I am creating a multiple line sales order from Idoc and using the FM IDOC_INPUT_ORDERS. The idoc is processed with status 51 with error message RV45A-VBAP_SELKZ (2) is not input field. It only happens for Idocs that are processed 1st time (re-proc