Iphone 4s data will not work + does not show up when plugged into macbook.

I need to try to reset my iphone because it is not allowing me to use data on the phone even though my carrier had verified all the settings are correct and that I have unlimited data on my plan. Every time I try to access the internet on the phone without wifi connected I get an error message saying "could not activate cellular data network" or "you are not subscribed to a cellular data network."
However, when I plug my iphone 4s into my macbook pro it is recognized and shown in itunes, however I cannot download photos (iphoto shows an error message saying "no camera found") and the phone does not show up on my desktop or finder. I find alot of people have a problem with the iphone not showing up AT ALL, but mine works in itunes, just nowhere else on my computer.
I have tried to use icloud to back it up, but when I log onto icloud with my macbook to see what data is there and try to access my photos, only my contacts and a few other apps I dont need show up. No photos at all.

If there's an Apple store nearby make an appointment with the genius bar to have it checked. Be sure to sync it and back it up, as well as import your photos and videos to your computer and back up your contacts separately (such as by sync them with iCloud) in case it needs to be replaced.

Similar Messages

I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work. It won't show up when plugged into the computer. Only charges when plugged in the wall or a car charger.

I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work. It won't show up when plugged into the computer. Only charges when plugged in the wall or a car charger. I've tried everything imaginable but I can't get the phone to register in iTunes at all.. The phone won't even reset.. when i try and reset EVERYTHING on the phone the apple logo with the progress bar starts to come up but the progress never moves.. PLEASE help me.. I'm at my wits end with this phone and I'm ready to just trash it.

martinfromdevon wrote:
Warning to iPhone users. Do not start the update of the iPhone software using iTunes.
Nonsense, and very misleading advice. I've updated iPhone 3G, 3Gs,and 4 through itunes many times, never had a problem once, not with one single update in nearly 5 years of iPhones. Of course, I've never jailbroken my phones either. Hack your phone and have update problems? I've got news for you, the problems are not a result of iTunes or Apple's updates.

I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work. It won't show up when plugged into the computer. Only charges when plugged in the wall or a car charger. I've tried everything imaginabl

I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work. It won't show up when plugged into the computer. Only charges when plugged in the wall or a car charger. I've tried everything imaginable but I can't get the phone to register in iTunes at all.. The phone won't even reset.. when i try and reset EVERYTHING on the phone the apple logo with the progress bar starts to come up but the progress never moves.. PLEASE help me.. I'm at my wits end with this phone and I'm ready to just trash it.

Dude you have a jailbroken phone as stated in your first post, no need to do a second post.
As per the forum term of service you can't get help here. Use google.
that's the downfall of jailbreaking your phone.

ITunes no longer recognizes my iPod nano 5th gen. When plugged into macbook usb it appears as my iPhone. Previously both devices had individual identities. Have reset iPod and turned macbook off/on.

iTunes no longer recognizes my iPod nano 5th gen. When plugged into macbook usb it appears as my iPhone. Previously both devices had individual identities. Have reset iPod and turned macbook off/on.

Hello BPeery,
I would go through ALL the steps here:
iPod not recognized in 'My Computer' and in iTunes for Windows
Let us know how it goes.
Hope this helps.
~Julian

My iPhone 4 does not allow me to sync wirelessly when plugged into itunes? How do I fix this? I am running leopard on a macbook pro. Could that be the issue?

I have updated my iphone software to ios5 and everything is working perfectly except for the wireless sync. When I plug my phone into my computer (I'm using a MacBook Pro running leopard) it does not give me the option to check the box in the summary section to sync wirelessly. Can anyone help? Please and thanks

stefani88 wrote: It seems from other discussions my current OS on my laptop is the reason why it won't sync but people running older versions of windows aren't having a problem. So I don't get it.
Oh. Gosh. What's Windows got to do with anything? You're on Leopard, on a Mac.
It seems from other discussions my current OS on my laptop is the reason why it won't sync

PDF printer not working, does not create PDF

I am using Mac OS X 10.6.8 with Adobe Acrobat XI.
Whenever I try to print a PDF though the printer function the PDF printer opens for a few seconds and no PDF is created.
Here is an example of the report when I open a file with in the Acrobat Distiller:
Adobe PDF-Einstellungen: /Library/Application Support/Adobe/Adobe PDF/Settings/Smallest File Size.joboptions
%%[ Error: undefined; OffendingCommand: Ìıÿ FÂΩ1ÔÁ˛t∑ DOCUMENT p ]%%
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
Dauer: 2 Sekunden (00:00:02)
**** Jobende ****
Can anybody help?
Thank you.

Thanks for the answere.
I still have the above mentioned problem when trying to print a pdf from a pdf (to reduce size) and when trying to print a pdf out of Indesign ( I dont want to use the export to pdf function because of file size).
When tryiing to print a pdf from a pdf through adobe acrobat pro the printer menue opens. When I click on printer I can choose the option choose 'save as Adobe PDF' but then the error message appears that saving as a pdf while printing is not supported. That I should choose file - save. Is that the only way to do it? The file gest bigger instead of smaller, even when I use a low resolution for the pictures. Can't I print PDFs as PDF somehow through the Distiller.
When I try to print a PDF with Indesign the Indesign-printing window appears. When I click on the printer and choose 'save as PDF' the Indesign simply jumps back to ints own printer window and ignores my choice. Therefor it does not seem to be possible to print a pdf from Indesign through the PDF printer?!
Thankful for any comments.

App update not working: Does not even begin to update

Since a day or two ago, I am having problems with my app updates on the iPad. According to the App Store, I have four apps that need to update. However, when I open the App Store and go to the updates tab, it does not list the apps that need to be updated. It also does not display the button to push to update the apps.
The problem is different from the others that I have read about online. It is not that it is stuck in updating mode. It does not even enter the update mode. All I get is the notice that I have apps that need updating.
I have done a reset to original settings, but that did resolve the problem.
Anyone else with same issue? Any suggestions for how to solve this?
A.

I still have the same problem.I sent email to Apple support but still have not gotten a reply. My iPad App Store App now says I have 12 updates but when I open the app and go to update section it is totally blank. This has been going on for the last five days. I cannot go to work around where you go to iTunes on your computer and update and then transfer that to your iPad because my computer has been out for more than a month which should have nothing to do with the matter. Thus I still cannot update my iPad apps.
Anyone else have same problem or a suggestion?
Thank you

Avelsieve not working (does not seem to be permissions problem)

Hello,
We have avelsieve installed to handle vacation auto responses.
When a user logs into their webmail and then clicks the 'Filters' at the top of the page, they see the following error:
Could not log on to timsieved daemon on your IMAP server localhost:2003.
Please contact your administrator.
I've seen a number of people suggest permissions fixes, but none seem to work. In the mailaccess.log, I am seeing the following line appear everytime a user clicks to enter their filters page:
Apr 9 11:35:30 mail sieve[16614]: TLS server engine: No CA file specified. Client side certs may not work
I'm really struggling to get the vacation responder working properly.. Is the problem permissions based, or is it originating from our certificates?

I just got done setting this up. Where I went wrong is that I didn't edit the /etc/squirrelmail/plugins/avelsieve/config/config.php file to use CRAM-MD5. Once I did that everything was happy again.
Check out this HowTo: http://www.afp548.com/article.php?story=20080106215609968
Also make sure /etc/services has been edited to turn on sieve.
Oh and I also did change the logging a bit for sieve as well per: http://lists.apple.com/archives/macos-x-server/2008/Feb/msg00664.html

IPod not Charging, or Connecting to iTunes when Plugged into the Computer

I cracked the screen a few weeks ago. When I plug it into the computer, it does not charge, and it is not recognized. BUT, if I use the same USB cable, I can charge it using a wall charger.

You can try here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
However, if you have acces to aonther computer that is know to connect to iPods I would try the other computer first. The iPod damage may be causing the problem

IPhone 5 getting really really hot when plugged into MacBook Pro Retina?

Hi
I have had my Macbook for about 1 month and I recently discovered that my phone is getting extremely hot while charging through USB port.
I was not sure if it was my phone as I was having issues with volume buttons, so was not sure if I had some dodgy software or something. So I went to the apple store and it was replaced as it was actually a hardware issue.
But then with my new replacement iphone 5 I am still having the same issue of the phone becoming unbearable to touch because it is so hot!
Does anyone know if there is an issue with the Macbook Pro Retina's giving out too much power and whether I should go and see someone about the issue ? But in the mean time is it still okay for my phone to be charge this way?
Thanks
Elle

You said:
"So far so good on the iPhone but it does not appear to be charging when I have it plugged into my MacBook Pro."
My iPhone charges when connected to my MacBook.
"FYI...the Edge Network out here in Wichita (of all freaking places) Kansas is pretty darn fast. I was really, pleasantly surprised. It does not help my heartbreak over moving to this burg from Sausalito but it helps a little."
Even data is anxious to leave Wichita, it seems .. and wants to linger in Sausalito
Phil

IPhone says 'Connect To iTunes' but won't turn on when plugged into the computer.

Hi all.
Having a major problem with my iPhone today. This morning it slipped off my desk somehow and fell on the floor. When I picked it up it would not turn on or respond, so I plugged it into the charger, the apple logo appeared and then the lock screen came up - it said slide to unlock, so I did and then it just said 'connect to iTunes' and I could not use it at all. So I unplugged it from the charger and it immediately turned off and became unresponsive again. I plugged it into the computer and started up iTunes. The apple logo appeared on the phone but then disappeared after about 15s. Then a few moments later the logo appeared again. And then disappeared again. This happens every time I plug it into the computer and what I described with the charger happens every time I plug it in there. Unfortunatley I cant seem to put it into recovery mode, especially as my home button is almost completely unresponsive and I have no idea if its working when trying to put into recovery mode. Please help!

You could try to do a hard reset, sometimes resetting the phone helps. Hold down the sleep/wake button on the top and the home button until you see the apple logo, this make take a minute or two but this might help.

Does not work (does not synchronize photos) iCloud Photo Library on all devices

hi there.
Help, please.
between my iphone and ipad are not synced photos.
iCloud Photo Library is enabled on both devices.
lit bar showing the download and srarzu goes out.
music library on your PC will not boot.
thank you in advance for your help
(iphone 5s, ipad 4. 8.3 beta 3

If deleting a photo from any device deletes it from the iCloud Photo Library, "library" may not be the right word to describe its function. Surprised nobody else has commented on this. Am I the only one who got this wrong?
Your iCloud Photo Library is in iCloud, and the main purpose is to sync and update it across all your devices. Any change you do, including deleting, will sync across all devices syncing with iCloud Photo Library.
If you want to save space on your mobile devices use the "Optimize Storage" option. Then you will store only optimized thumbnails on your devices and keep the full resolution versions in iCloud.
http://www.apple.com/osx/photos/
Fill your library, not your device.
iCloud Photo Library can help you make the most of the space on your Mac. When you choose “Optimize Mac Storage,” all your full-resolution photos and videos are stored in iCloud in their original formats, with storage-saving versions kept on your Mac as space is needed. You can also optimize storage on your iPhone, iPad, and iPod touch, so you can access more photos and videos than ever before

Calculator does not work, does not add weekly, monthly or yearly correctly

Hi I am making a calculator where the user inputs his/her income (wages, loans, other) and spending (rent, food, other). I am an if else statement to add up the input fields as the user can input the numbers according to weekly, monthly or yearly. It allos me to run the code but when I input 10 pounds in each of the 3 fields the result is 30 but it should have calculated as 10 * 4.3333333 for each of the three fields.
The if else statement is below;
double totalIncome = num1 + num2 + num3;
double totalSpending = num4 + num5 + num6;
double result = 0;
if (op1.equals("Weekly"))
result = num1 * 4.3333333;
else if (op1.equals("Monthly"))
result = num1;
else if (op1.equals("Yearly"))
result = num1 / 12;
else if
(op2.equals("Weekly"))
result = num2 * 4.3333333;
else if (op2.equals("Monthly"))
result = num2;
else if (op2.equals("Yearly"))
result = num2 / 12;
else if
(op3.equals("Weekly"))
result = num3 * 4.3333333;
else if (op3.equals("Monthly"))
result = num3;
else if (op3.equals("Yearly"))
result = num3 / 12;
TotalIncomeField.setText( "" + totalIncome);
THE WHOLE STATEMENT LOOKS LIKE;
try {
double num1 = Double.parseDouble(LoansField.getText());
double num2 = Double.parseDouble(WagesField.getText());
double num3 = Double.parseDouble(OtherField.getText());
double num4 = Double.parseDouble(RentField.getText());
double num5 = Double.parseDouble(FoodField.getText());
double num6 = Double.parseDouble(OtherField2.getText());
String op1 = (String)LoanComboBox.getSelectedItem();
String op2 = (String)WagesComboBox.getSelectedItem();
String op3 = (String)OtherComboBox.getSelectedItem();
String op4 = (String)RentComboBox.getSelectedItem();
String op5 = (String)FoodComboBox.getSelectedItem();
String op6 = (String)Other2ComboBox.getSelectedItem();
double totalIncome = num1 + num2 + num3;
double totalSpending = num4 + num5 + num6;
double result = 0;
if (op1.equals("Weekly"))
result = num1 * 4.3333333;
else if (op1.equals("Monthly"))
result = num1;
else if (op1.equals("Yearly"))
result = num1 / 12;
else if
(op2.equals("Weekly"))
result = num2 * 4.3333333;
else if (op2.equals("Monthly"))
result = num2;
else if (op2.equals("Yearly"))
result = num2 / 12;
else if
(op3.equals("Weekly"))
result = num3 * 4.3333333;
else if (op3.equals("Monthly"))
result = num3;
else if (op3.equals("Yearly"))
result = num3 / 12;
TotalIncomeField.setText( "" + totalIncome);
if
(op4.equals("Weekly"))
result = num4 * 4.3333333;
else if (op4.equals("Monthly"))
result = num4;
else if (op4.equals("Yearly"))
result = num4 / 12;
else if
(op5.equals("Weekly"))
result = num5 * 4.3333333;
else if (op5.equals("Monthly"))
result = num5;
else if (op5.equals("Yearly"))
result = num5 / 12;
else if
(op6.equals("Weekly"))
result = num6 * 4.3333333;
else if (op6.equals("Monthly"))
result = num6;
else if (op6.equals("Yearly"))
result = num6 / 12;
TotalSpendingField.setText( "" + totalSpending);
} catch (NumberFormatException ex) {
}

First of all, you are calculating 'result', but you don't use it anywhere. Instead you use 'totalIncome' and 'totalSpending', which are calculated without the daily/yearly corrections.
Also, there are some 'else' keywords that should not be there. If (op1.equals("Weekly")) will be true, no other part of the if block for num1, num2, num3 will execute. It should look like this:
     if (op1.equals("Weekly")) {
          num1 *= 4.3333333;
     } else if (op1.equals("Yearly")) {
          num1 /= 12;
     if (op2.equals("Weekly")) {
          num2 *= 4.3333333;
     } else if (op2.equals("Yearly")) {
          num2 /= 12;
     if (op3.equals("Weekly")) {
          num3 *= 4.3333333;
     } else if (op3.equals("Yearly")) {
          num3 /= 12;
     double totalIncome = num1 + num2 + num3;
     TotalIncomeField.setText( "" + totalIncome);Similarly for the spending.

Can I get a refund for an app that did not work (does not open) ?

I bought an app to record lectures for my classes. When I tried to open the application it wouldnt open at all.

Did you buy the app from App Store? Did you check if your machine is capable of running this app?
You should first set up a dialogue with the developer to try to determine what may have caused the problem. Most developers co-operate with their clients, not least because it is in their interests to do so.
Sales from Apple are final and refunds are not the rule. However, if you raise the issue against the receipt, (there is a note on the bottom inviting you to raise any issues you may have) exceptions have been made if the circumstances justify it.
But developer first.

Multicast WDS Imaging Not Working - Doesn't show up when booted via PXE..?

I have a lab environment setup specifically for imaging laptops via WDS. I have a stand alone Windows 2012 server connected directly to an 8-Port Cisco SG-220 8 Port switch. Nothing else is connected to this server and it is not being
used for anything else. The server is running DHCP and WDS. I can boot laptops via PXE and connect to the WDS server to deploy the images through standard WDS imaging. However, I have not been able to get Multicasting to work. I
have never used Multicasting before and have read through the documentation but must be missing something. This is what I've done:
1. In the WDS server I right click on my deployment image and select 'create multicast image' then go through the prompts to create an auto-cast image.
2. The Multicast image is created and shown as 'waiting' on the WDS server.
3. The Cisco router is brand new out of the box, the only configuration I did was to enable IGMP snooping. I did not make any other changes to the setup of the switch.
4. I boot a target machine via PXE using the same Boot Image that I always use. It loads to the screen where I can select the image I want to deploy but it never shows the multicast image as an option. I only see the regular image I had previously
been using.
I'm not sure what else I'm missing in order to get the target machine to connect and image using the multicast image.
Here are a few screen shots of what I have setup:
Here is the multicast image created on the server
Here is the Cisco Router configuration:
Here is the NIC card configuration on the server:
This is the target laptop booted via PXE but it never shows the multicast image as an option.
/>

Hi AdamNYC31,
The multicast feature used by WDS uses Internet Group Management Protocol (IGMP) version 3. Your network switches will need to support this, and you’ll need to configure them
for multicast. Please refer the following similar thread check each step Aaron Tyler and Ron St and Ankit Oberoi offered solution.
Multicast issue: Always "Waiting"
https://social.technet.microsoft.com/Forums/windowsserver/en-US/18122b39-e707-455d-b22f-956ebfb95e40/multicast-issue-always-waiting?forum=winserversetup
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Iphone 4s data will not work + does not show up when plugged into macbook.

Similar Messages

Maybe you are looking for