IPhone 4s dock connector functionality after iOS 7 upgrade

I recently decided to upgrade my Apple iPhone 4s 64gb CDMA model to iOS 7, prior to the upgrade I had no problems at all. The upgrade was successful but after the reboot the device was no longer being recognized by iTunes on my Macbook Pro. The phone would charge without a problem just not readable any longer by iTunes. Thinking something was wrong with iTunes on my Macbook I tried attaching it to my Mac Mini that previously worked but the same thing occured so I tried swapping cables but no change in status. So I figured let's reboot the device to see if that fixed it, but it would no longer respond to holding in the power button, so I did the trick with holding in the home and power button to force a reboot which worked. However when it restarted it just keep rebooting, meaning it would show the apple logo at startup then restart and kept repeating this process in a loop. It seems that the device is stuck in a recovery mode and each time I try to connect it to iTunes it will briefly recognize the device but will reboot which produces an error message.
I tried a few third party software solutions that are known to force the device out of the recovery mode but none of them seem to work on it. Not sure where to go from here, my thought was to replace the dock connector but just not sure that is the problem given it was working perfectly before the iOS 7 upgrade.
Looking for sugguestions?

Hi 99mustang232,
If you are having issues connecting or restoring your iPhone after a recent update, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden

Similar Messages

TS3198 Will iphone continue to be unlocked after iOS upgrade?

I.e. if I unlocked it - is it always unlocked now? How about factory reset?

If it is factory unlocked, or unlocked by your cellular provider, it will remain unlocked. If it has been hacked to provide the unlock, it will most likely become locked again during an upgrade.
Stedman

I downloaded the new iOS 6 for my iphone 4. I have 2 iphones on my account and after the "upgrade" text messages go to both phones. When I send a text to my wife I recieve the same text and vise versa. How can I fix this?

I downloaded the new iOS 6 for my iphone 4. I have 2 iphones on my account and after the "upgrade" text messages go to both phones. When I send a text to my wife I recieve the same text and vise versa. How can I fix this?

"Sounds like you guys are using the same apple id for imessage. You will need to create a separate id for you wife. OR go to settings - message - receive&send and make sure your phone number is the default for both you and yoru wife.

My iphone 5 wont reboot again after i upgraded to ios8

My iPhone 5 wont work properly after i upgraded to ios8 all i can see on the screen is apple logo that made it looks like its starting but it wont start up since yesterday please I need help. It's all started after I upgraded to ios8 and after that I noticed that I couldn't send picture messaging to android then I also knew the message settings on my phone that has mms option is not on my phone anymore then I called apple to help me then the lady told me that my ios8 didn't probably install correctly that I should restart my network settings, I did that but it still wont work so I called again the other apple rep told me to reset all settings that everything will come back to normal and immediately I press the reset button my phone went off and turned on after booting for a while but it wont take me to home page but blank with apple logo on it since yesterdays afternoon, I'm really frustrated and ****** ...please kindly help me thanks.
Azeez

My wifes has started to do the same, the iphone 3Gs was mine, I updated it to ios 5.0.1 while still using it and it was fine. I did a backup restore of her old 3G phone and again it was find for awhile.
We noticed she doesnt have any data part of her package so we have switched off the data, since then we have this issue.
I had to install a new docking part of the phone as her mic was faulty, I did the sim out, switch on 3G and data and then sim back in. Switched the phone off and then back on. all good.
I stripped the phone down adn replaced the part. again all good. That I night my wife said Shall she turn the phone off in which I replied it should be fine. When she turned the phone on in the morning, the reboot problem was back.
I'm wondering if the problem is to do with the Data on and off. I've also noticed that when the phone is up beofre it reboots, you can pop out the sim and the signal stays the same.
When it does have a problem, she now does a quick reset from the phone which takes about 5 minutes and shes back up and running. its big pain!
Think I will get her on a data package and then try again

HT4623 My iPhone 4S keeps shutting down after I upgraded to iOS7

My iPhone 4S keeps shutting down after I upgraded to iOS7

This has happend twice to me in the past 12 hours since I just updated to iOS 7.0.2, but did not happen after I updated to iOS 7
Last night the operating system crashed to the Apple symbol (a reset) when browsing the settings menu.
Perhaps it's a bug with the movement tracking? Seems to be connected with sudden movements (I noticed it shut off when I quickly lifted the phone up to look at the screen) - perhaps the background parallax is glitching the system to a software reset? If my problem persists I may temproarily disable the parallax to see if that mitigates the resets.
To be clear, the update to iOS 7 didn't precipitate this problem, and I updated to iOS & on the day of its release (9/18).
This used to happen to me sporadically on my iphone 4s on iOS6, usually when my battery was anywhere at 40% to 5% - though I suspect that was because I was due to re-set the battery by completely draining it.
Is anyone else having this issue with their iPhone 4S?
I'm using a Verizon iPhone 4s 64 GB, still in excellent condition.

Is anybody else having a problem with Bluetooth functionality after iOS 7? I have lg tone Bluetooth headset that I use while working out, cutting the grass, etc. Before the update I could press the "next track", but anymore.... Help?! Please!!!!!!

Is anybody else having a problem with Bluetooth functionality after iOS 7? I have lg tone Bluetooth headset that I use while working out, cutting the grass, etc. Before the update I could press the "next track", but anymore.... Help?! Please!!!!!!

Tell Apple about it: http://www.apple.com/feedback/iphone.html
Be sure to give as much detail as possible.
I would also check LG's site.

Apple iPad 3. BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Can anyone help me please.

BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Apple iPad 3. Can anyone help me please.

All resolved at last
Deleted the SMTP setting
Recreated the SMTP using the same settings
Able to send emails now
No logic - as usual - just a bug!

I bought a Sandisk Connect Media Drive, downloaded the app from iTunes. Before iOS 8, movies played fine. After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive. Anyone else have a similar issue?

I bought a Sandisk Connect Media Drive, downloaded the app from iTunes. Before iOS 8, movies played fine. After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive. Anyone else have a similar issue?

I checked with SanDisk's own online support and they indicate that they have notified Apple of the issue.
According to SanDisk, the problem lies with Apple not having the iOS 8 version of the Safari browser having DRM decoding enabled that the Media Drive relies upon to decode and play iTunes DRM titles. Non DRM encoded videos will play in the browser.
DRM audio is not effected as this is handled by the native iOS music app.
As of the date of this post SanDisk have not been given a timeframe by Apple for this issue to be resolved.
I hope that Apple resolves this issue quickly as I have a large collection of DRM video titles on a 128Mb memory card installed in the Media Drive that I am unable to view.

IPAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore

PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore. Just get an Apple Logo then a flashing blue screen as if it is caught booting up. This has happened twice before and iTunes restore fixed it. But this time device not appearing in iTunes.
Running iTunes for PC. But as stated restore has worked before! Any help greatly appreciated!!

Place the device in DFU mode and let iTunes restore the device to factory condition.

Placing, and receiving calls through the iPhone's dock connector.

Can calls be placed and received through the iPhone's dock connector?
For example, assume you have a device, with two connectors, an iPhone dock, and a telephone jack. The device would allow you to connect a standard phone, cordless phone base station, fax machine, etc, and make calls using your iPhone cell service instead of you landline.

No, that can not be done.

3G icon in the status bar got disappear after ios upgrade 8.1

3G icon in the status bar got disappear after ios upgrade 8.1

Nginear48 wrote:
Thanks for your quick response. I've tried everything you suggested and get only temporary fixes. Sometimes for a day or two, sometimes only until I use Safari for the first time. It's annoying and probably effects battery life between charges.
You would think that it must have some effect on the battery, but oddly enough, the update to iOS 8 actually helped my battery life, in spite of all of these hinky little issues that are taking place. In my experience, the activity icon is not affecting the battery in a negative way.
Another issue with IOS 8.1 that you may have seen is the loss of icon pictures on home pages. Again it seems to be Safari related, since app icons found in the App Store are not affected, only web based icons you personally put on home pages. I get what I call a test screen similar to what you used to get on old tv sets on every one of my personal icons.
I know exactly what you mean. I got that as well. On a few of them, when I opened the websites using the generic test screen icons and then closed them, they changed back to the way that they should look. For the ones that did not change, I recreated the home screen shortcuts and deleted the generic looking ones - the test screen icons.
And don't get me started on iBooks.
For the very limited use that I make of the iBooks app, i haven't noticed any problems, but I rarely use the app. I don't read books on the iPad other than a few user guides and if they are pdf guides, they reside in more reliable and feature rich pdf apps on my iOS device.
I wish that I had the fix for the spinning activity icon, but everything that I try, is temporary at best. IMO, this is the buggiest iOS update that I have seen, and I have been using iOS devices since iOS 3 on my first iPad. I realize that there are plenty of people that are not experiencing issues, but I have seen a number of weird things that I wish I could fix. None of my problems are major, but they are annoying.

Customer exit is not functioning after ECC upgrade/support package

It seems our customer exit is not functioning after ECC upgrade/support package. I tried to activate the project again, no use. please help. Thanks! (see below for the enhancement info)
COZF0002 Change purchase req. for externally procured component
EXIT_SAPLCOZF_002
INCLUDE ZXCOZU02
*& Include           ZXCOZU02
CONSTANTS: lcc_eban(25)   TYPE c VALUE '(SAPLCOBC)EBAN'.
FIELD-SYMBOLS: <fs_eban>   TYPE eban.
DATA: l_fkstl TYPE prps-fkstl.
Move values from the LUW to the Internal Table
ASSIGN (lcc_eban) TO <fs_eban>.
If the field symbol is "NOT' empty then proceed
IF ( <fs_eban> IS ASSIGNED ).
if WBS work order, get cost center from PRPS
IF ( caufvd_imp-auart = 'ZM05' ).
    SELECT SINGLE fkstl INTO l_fkstl FROM prps
      WHERE pspnr = caufvd_imp-pspel.
    IF ( sy-subrc = 0 ).
      WRITE l_fkstl TO <fs_eban>-zzfistl.
    ENDIF.
if not WBS WO, move cost center minus leading zeros to funds center
ELSE.
    WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
ENDIF.
ENDIF.

Did you mean set a break point in the follow code?(Include ZXCOZU02), I tried set a break point in this code, but It didn't stop .
*& Include ZXCOZU02
CONSTANTS: lcc_eban(25) TYPE c VALUE '(SAPLCOBC)EBAN'.
FIELD-SYMBOLS: <fs_eban> TYPE eban.
DATA: l_fkstl TYPE prps-fkstl.
Move values from the LUW to the Internal Table
ASSIGN (lcc_eban) TO <fs_eban>.
If the field symbol is "NOT' empty then proceed
IF ( <fs_eban> IS ASSIGNED ).
if WBS work order, get cost center from PRPS
IF ( caufvd_imp-auart = 'ZM05' ).
SELECT SINGLE fkstl INTO l_fkstl FROM prps
WHERE pspnr = caufvd_imp-pspel.
IF ( sy-subrc = 0 ).
WRITE l_fkstl TO <fs_eban>-zzfistl.
ENDIF.
if not WBS WO, move cost center minus leading zeros to funds center
ELSE.
WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
ENDIF.
ENDIF.

IPhone 3GS Audio Volume Decrease After iOS 5 Update

The Audio/Volume on my iPhone 3GS has Decrease SIGNIFICANTLY After iOS 5 Update. Oddly, the volume of the ring is fine, and as lout as it used to be, and as loud as all other audio should be, but when using any 3rd party applications, the volume output is significantly less (about 40% less) than it used to be.
I am NOT the only person to experience this problem. Apparently, the issue has been around since this past summer, when iOS was still being developed / tested. There is a post about someone experiencing the same issue, here:
http://modmyi.com/forums/general-iphone-chat/768919-ios-5-low-volume.html
And before you ask .. I did a language change and reset, and I am still experiencing the SAME issue.
Any help or advice with this problem would be greatly appreciated.
In advance, thank you.

I have a similar or related problem with iOS5/3GS and volume:
https://discussions.apple.com/message/16413964#16413964
In my case I can hear nothing from the internal speakers although I can use headphones. The volume slider bar is unavailable unless I plug in headphones.

I cannot sync contacts between my iPhone 4s and MacBook Pro after I upgraded the Mac with the latest operating system software upgrade. Even the Mac Store couldn't help...

I cannot sync contacts between my iPhone 4s and MacBook Pro after I upgraded the Mac with the latest operating system software upgrade. Even the Mac Store couldn't help...

That is because that sync ability (for contacts and calendars) has been removed. Use iCloud instead.

No valid license found after IOS upgrade on C3750x switch

HI,
Two switches below are working fine as a stack with IOS c3750e-universalk9-mz.122-55.SE5.bin & ipbase license.
Switch#1 (Master, WS-C3750X-24P-S)
Switch#2 (Member, WS-C3750X-24P-S)
After IOS Upgrade to c3750e-universalk9-mz.150-2.SE7.bin, The stack was broken. Switch#2 didn’t recognise valid ipbase license with new IOS and came up with lanbase license instead. Therefore stack cannot be composed due to license mismatch between Switch#1 (ipbase) and switch#2(lanbase).
I’m wondering why Switch#2 didn’t recognise ipbase license with new IOS even though IPASE is running well with previous IOS.
Here is excerpt from “show version” with 15.x image on Switch#2.
License Level: lanbase
License Type: Default. No valid license found.
Next reload license Level: lanbase
Here is excerpt from “show version” with 12.x image on Switch Stack.
License Level: ipbase
License Type: Permanent
Next reload license Level: ipbase
Thanks
Jeong

Thanks guys,
I have fixed the issue by configuring 'license boot level ipbase' on the member switch#2. The switch recognised IPBASE license well and joined the stack successfully.

IPhone 4s dock connector functionality after iOS 7 upgrade

Similar Messages

Maybe you are looking for