IPhone 4s does not trust iMac after upgrade to Snow Leopard. I am using my iPhone's hot spot for internet connection.

Can't sync iPhone and iMac since upgrading to Snow Leopard. Using iPhone for internet access. Help??

Hello Brad:
First, forget about a virus. There are NO documented viruses that affect a Mac running OS X - none.
Do you have about 10-15% of the HD free at all times?
Open activity monitor and see what is taking the processor capacity.
Barry

Similar Messages

  • Macbook does not start anymore after upgrade to Snow Leopard

    I successfully upgraded my MacbookAir to Snow Leopard, but my son's Macbook refuses to start after having been upgraded.
    Please help!

    Hello,
    my MacBook Pro (late 2008 unibody) just needs a main logicboard replacement, fortunatly still within warrenty, after updating to 10.6.0. I experienced the following: With an update from 10.5.6 to 10.5.7 the MBP freezed within 10min. after reboot, with every restart it freezed after a shorter period and finally freezed during the boot process. I've mounted the MBP as an external HD to my iMac, did an backup and deleted the internal MBP harddrive by overwriting it with zeros. I did the usual procedure of resetting SMC, P/V-RAM and reinstalled 10.5.6 - everything was fine again!
    When Snow Leopard came out, I updated again, hoping the issue has been repaired. BUT I experienced the same problems and with some system permission deleting I got SL running as long as I did not turn on AirPort. As soon airport is activated and an internet connection is established I could count the seconds until the mac freezes. And it will only come up again by deleting the system configuration preferences (via single user mode booting).
    Thereafter I was sure there is a hardware problem with the airport card or the logic board. The Apple Service Provider did not find any hardware failure and finally will change the logic board. Hopefully I got the Mac back next Tuesday. I let you know about the results.
    Best regards!
    PS: Obviously software could damage hardware or some hardware components used by Apple are not compatible with some of their software.

  • HT1688 My iphone 5 does not ring anymore after upgrading to ios 7.0.2

    My iphone 5 does not ring anymore after upgrading to ios 7.0.2.  It did not happen right away, but maybe 2 weeks ago.  I tried turning the "do not disturb" on and add allow everyone to call as well as turning it off but it only vibrates when calls come in.  I also turned my phone off and it still only vibrates when calls and messages come in.

    I found another feed and said there is a silent button next to volume bar.  That was the problem.

  • Time Capsule backup not working anymore after upgrade to Snow Leopard

    Hi,
    after I upgraded to Snow Leopard I started the backup process with the time capsule. Within several days I tried this about 5 times and the iMac crashed or froze after some time doing the backup - but it never completed.
    I then deleted the whole content of the time capsule and started a fresh backup. Now I receive a message after some gigabyte that there was a problem and I should try it again. Again the backup has not finished so far. I tried to reduce the amount of files to backup by excluding folders - no chance. Since the upgrade to snow I was not able to complete one single backup.
    Any ideas or similar experience?

    I have had a similar problem. I have the latest 1TB Time Capsule and backup worked fine in Leopard. I am backing up over my home wireless network. The backup starts, but at some point it freezes with the spinning pizza wheel if I click on anything. Everything freezes with no possibility of force quitting any application.
    I tried trashing the plist for Time Machine, but that didn't work. Tonight I'm going to try a backup with the computer connected to the Time Capsule by Ethernet.
    I can access my existing Time Machine backups on the Time Capsule.
    This is a frustrating situation. But for this, SL works great, but this problem is a critical one.

  • IPhone 4 does not catch signals after upgrading to iOS 7

    I am a iPhone 4 user. It does not catch proper signal strength in home after upgrading to iOS 7 whereas it does catch it on the outside. It worked perfectly with previous iOS versions. Please help me out.

    Does anyone have any solution???
    Reply ASAP...
    My iPhone has turned into an iPod since l upgraded...

  • Iphone 3gs does not sync music after upgrading to IOS 5

    I upgraded my Iphone 3GS to IOS 5.  This introduces Icloud. Since doing so, I have not been able to sync my music.  I get the error message "unable to sync - not enough free space (additional 8.4 GB required).  This is the same size as the music I want to load to my phone, which was fine before the upgrade.  Any help gladly received.  Thanks

    Does anyone have any solution???
    Reply ASAP...
    My iPhone has turned into an iPod since l upgraded...

  • Iphone not recognized in itunes after upgrade to snow leopard

    after upgrading to snow leopard, iPhone not recognized in iTunes & does not show up.
    Account OK in iTunes.
    Any idea how to resume normal sync ?

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • I have a big problem with Lion and PGP. After upgrading from snow leopard to lion I cannot access my PGP drive which was generated under snow leopard. PGP does not start but gives a notion that lion cannot work with my PGP version. Solution?

    After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this? 

    If you have this product,
    http://www.symantec.com/business/support/index?page=content&id=TECH165159
    you have to go back to Snow Leopard.
    To re-install SL, back up your home directory, format and re-install.

  • FireWire 400&800 (IMAC Core2) NOT WORKING after Upgrading to SNOW LEOPARD!

    My FireWire 400&800 (iMAC Core2) are *NOT WORKING* after Upgrading to SNOW LEOPARD!
    Any Solutions?
    Thanks!
    --Frank Strallents
    www.SHOCKPROOFX.com

    I'll try your suggestions....Thanks!
    Recently, I try to Re-install Snow Leopard, unfortunately, still unsuccessful.
    The Mybook Icon only appears if it is connected via USB.
    After using Firewire and getting used to the speed...USB 2.0 is like a Corvette racing a Veyron...lol
    I am not upset on these issues, it is normal for new OS to have these problems...unfortunately, even OSX is not invincible.
    I'm sure Apple/Steve is on every Programers A*s for a solution.
    I still think APPLE'S OSX will still be the future of Operating system!
    For now, still waiting for the patch and hopefully soon.
    Suggestions are still Welcome for a Solutions:-)
    Frank
    SHOCKPROOFX.COM

  • Not able to install anything fully after upgrade to Snow Leopard

    I haven't been able to install anything after upgrading to Snow Leopard yesterday. Anything program i do try to install just bouces on the dock

    Try installing the update again from here
    http://support.apple.com/kb/DL1048
    This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
    Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
    -mj

  • TS2998 After upgrading to Snow Leopard, Mail will not let me archive any mail. All archived messages re-appear in my inbox (I have tried archiving and placing in the trash bin).

    After upgrading to Snow Leopard, Mail will not let me archive any mail. All archived messages re-appear in my inbox (I have tried archiving and placing in the trash bin). How do i regain control of my inbox?

    The main differences that can cause a problem are scripting additions (64-bit vs 32-bit and security reasons) and the usage of dates (it is not as forgiving). AppleScript itself is basically the same, so if empty paragraphs are what caused your problems the update would have just been a coincidence.

  • After upgrading to snow leopard my HP C5180 printer will not allow me to scan to the computer, it only works as a copier?

    Hello,
    My hardrive crashed, replaced and reinstalled. However after upgrading to Snow Leopard v.10.6.8, my HP C5180 printer will not give me an option to scan an image to the computer. It only functions as a copier. Any suggestions are greatly appreciated!
    Thanks

    If your driver is up to date (you didn't say) then you can try Image Capture in your Applications folder or take a look at VueScan http://www.hamrick.com/

  • After upgrading to Snow Leopard, I can not log into the computer. What Can I do?

    after upgrading to Snow Leopard, I can not log into the computer. What Can I do?

    SqueezeAce wrote:
    after upgrading to Snow Leopard, I can not log into the computer. What Can I do?
    Stick the 10.6 disk into the machine and reboot holding the option/alt key down on a wired/built in keyboard.
    On the second screen, under the Utilities menu is a Password Reset, use it.
    Step by Step to fix your Mac
    What this will do is reset the password and the user account permissions in the process.
    You might have problems with Keychain afterwards, to fix that.
    https://support.apple.com/kb/HT1631  https://support.apple.com/kb/TS1544
    If your still having trouble, look through these User Tips
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/?p er_page=50

  • Titles and Transitions doe not work after upgrading to Snow Leopard

    I can not get my Titles or transitions to work in iMovie any more after upgrading to Snow Leopard.
    Everything goes to a black screen. I am having problems with final cut express also. Anyone have an idea when there will be a patch to fix this? I would hate to have to down grade.

    Holy *&$^, no kidding. I mean this is bad. I can't really do anything on iMovie at all. I really hope there is a simple solution to this, b/c if this really is part of a bad release, Apple will not hear the end of it.

  • After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution

    After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution?

    Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]]

Maybe you are looking for

  • How can I move apps from one computer to the other?

    How can I move apps from one computer to the other? (preferably without iCloud)

  • Characteristics wise stock report

    dear friends How can we see the report on the basis of material charactersctics report for viewing stocks at a particular plant, if so help me with transaction th anks

  • It's official....iDVD *****...I give up

    I'm not a newbie. I'm a photographer that likes to give clients slideshow DVD's. I tell you, I cannot get make a simple slideshow with iDVD for over one year now. I make the show in iPhoto and send it to iDVD. This takes FOREVER. Finally after waitin

  • Novatel Wireless Merlin X950D not working with Snow Leopard

    I've just upgraded my MacBook Pro to Snow Leopard and my Merlin X950D 3G broadband card has stopped working. When I insert the card sometimes it's detected but won't connect, sometimes it's detected but only after being inserted for some time (5 mins

  • Why can't i update any of my apps?

    i use my parents Apple ID and it works for them but not for me. They changed the password and I put in the password to update and it stop after I submit the password. it goes back to update. I tried my own Apple ID and it still doesn't work.