Iphone 4S error code 36

hi i upgraded my iphone 4S from IOS 7.0 to 7.0.2, it went on restart and didn't make the successfull loading. now when i connect it through itunes, it asks for the restore and when do so, it comes with Error Code 36, please anybody can help me, would be grateful.
Regards
Atif Shahid
+92-323-4476704

if you have tried ALL suggestions then your phone is obviously broken beyond reparing by user
but if you might not have then you can try reading these
https://discussions.apple.com/message/21571280#21571280
http://www.techisky.com/how-to/easy-fix-iphone-in-recovery-mode-upgrading-to-ios -6-2.html
more
restore iphone error 36

Similar Messages

TS3694 how can restore my iphone 3g error code 1015

how can i restore my iphone 3G error code 1015

Please see the More Like This section on the right

Iphone 4 error code 2001

The battery on my iphone went dead. Now i get the cable and itunes logo when connected to the cable. Phone switches off when not connected. I connect to Itunes and it says i must restore. When i click restore i get an error code 2001. Did a google search and all the things i found that people say works doesnt work for me. New cables, DFU, USB Hub/no hub etc
Any help will be appreciated
Use Mac pro
mac os x lion 10.7.2
itunes 10.5.1
Thanks

http://support.apple.com/kb/TS3694#error2001
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.

IPhone 3GS error code 26

Hi all, since I updated my iPhone 3GS 32g to iOS 5 it is dead, error code 26. I presented it at a local retailer where I bought it almost 2 years ago. After 2 weeks of waiting SBE company simply mailed me they won't repair it since it has a minor crack at the dock connector (iPhone still in guarantee). They suggest me to swap it for 339 euro for an 8 gig. Mine is 32 gig and was solid before the update! Is there anything I can do? Is error 26 unrepairable?
Thanks for your advise!

1. Perform USB isolation troubleshooting, including a different USB port directly on the computer.
2. Put a USB 2.0 hub between the device and the computer, or eliminate the hub if using one.
3. Try a different USB 30-pin dock connector cable.
4. Eliminate third-party security software conflicts by disabling all anti-virus & firewalls.
5. There may be third-party software installed that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your Registry. If your default packet size is set incorrectly it can cause this error. Contact the manufacturer of the software that installed the packet size modification for assistance.
6. Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
7. Try to restore from another known-good computer and network

Iphone 3GS Error code 14 after trying to update to ios4

Hi!
So i tried to upgrade my iPhone 3GS, which I just got back from apple, to iOS4.
After downloading iOS 4 via iTunes it started installing and then crashed right when it began installing. Bam Error Code 14.
Funny thing i upgraded my Girlfriends 3G two days earlier on the same book.
Well so I started trying everything:
Use an other USB Port
Use an other cable
Create new user on Mac and reinstall iTunes
Redownload ios 4 via iTunes
Redownload ios 4 via the Internet
Try in DFU Mode
Even tried downgrading to Os 3.1.3./3.1.2
Of course also tried an other pc and an other mac.
nothing works for me!
Kinda annoyed cauz I really need my Phone!!!
Anyone got an idea?

1. Perform USB isolation troubleshooting, including a different USB port directly on the computer.
2. Put a USB 2.0 hub between the device and the computer, or eliminate the hub if using one.
3. Try a different USB 30-pin dock connector cable.
4. Eliminate third-party security software conflicts by disabling all anti-virus & firewalls.
5. There may be third-party software installed that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your Registry. If your default packet size is set incorrectly it can cause this error. Contact the manufacturer of the software that installed the packet size modification for assistance.
6. Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
7. Try to restore from another known-good computer and network

TS3694 failure in restoring firmware of my iphone and error code is 1015

I have a failure in restoring the firmware of my iphone and it gives me an error code of 1015 even though I am connected to the internet.

This may not help your situation byt it explains the error code
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

IPhone 6 | error code 53

I tried to update my iPhone 6 to 8.2 and it is giving me error code 53 and is stuck in recovery mode !!!!HELP!!!! I don't know what to do and I need yall's help please.

Hey sdfgsdh,
I am sorry to hear that you are stuck trying to restore your iPhone. For most errors that you when trying to do that, the article below will typically resolve most issues. If it does not, there is a link in there for more advanced troubleshooting.
Resolve iOS update and restore errors in iTunes
https://support.apple.com/en-us/HT201210
Take care,
-Norm G.

Iphone 5s error code 4013

My iphone 5s is stuck on the itunes screen on bootup. I keep getting the error code 4013 when i try to restore it. Can anyone help me?

Before You Start
http://www.igeeksblog.com/how-to-fix-itunes-error-4014-4013/
As always:
Use the latest version of iTunes
Make sure iPhone has enough space to bring in a new update. A gig or more is recommended.
Also make sure the iPhone is not low on battery.
The Real Problem
Error 4014 (or 4013) is usually associated with a hardware problem – a faulty cable, a faulty port etc. On the surface, your iPhone connects to the computer, iTunes recognizes the device but somewhere down the line, iTunes thinks that the cable is not really that good. Or may be the port isn’t.The first thing you try should be change the USB port to which you connect the iPhone. Next up, change the cable that you use. Arguably, this has worked not for everyone but for a few people.
As an extreme measure, you can also try updating from some other computer which has the latest iTunes installed.
Backing Up and Going Into Recovery ModeIf you are trying to update the firmware without doing a clean restore but running into this error (even after changing the cables), it’s time to cut the chase. This method is usually recommended as the last-thing-to-try but I think it’s easier to get this done with right away.
Connect your iPhone to the computer. Fire up iTunes.
Backup your iPhone.
Now disconnect the iPhone, quit iTunes.
Put the iPhone in recovery mode. The short version goes like this: press and hold power and home buttons till the screen goes blank.
Open iTunes on PC.
Connect the iPhone. iTunes should indicate (through a dialog box) that an iPhone is detected in recovery mode.
Now go ahead and restore the device as new. This will erase everything but you will have the backup to restore from.
Some Notes
Occasionally, the error seems to vanish when people update to the last iOS 6.x version and then update to iOS 7. (This applies when you are on iOS 6.0, 6.1).
Clear out apps and app memory to free up space on your iPhone. Although this sounds very unrelated to this error, it has helped.

I have recently installed the new software on my iphone 4s - Error code 1600

Please does anybody know....
I have just installed the new software update on my iphone 4s soon after it my phone kept turning itself off then it wouldnt come on at all so i connected it to my mac it said my iphone was in recovery mode so needed to install new software.... i waited for 10 mins roughley then at the very end it said cannot install update then it came up with - unknown error code 1600.
Does anyone know if i can fix this from home or do i need to take it into the shop?
Many thanks.

You can use the iPhone version of YouTube or Jasmine
http://itunes.apple.com/sg/app/youtube/id544007664?mt=8
https://itunes.apple.com/sg/app/jasmine-youtube-client/id554937050?mt=8

Programm not installed on the iPhone, unknown error Code 0xE8000001

i tried to synch my iphone after installing OS4 on my iPhone and get the above error code by some applications. Other applications are installed without any problems.
I have had the some problem with syncing the apps we the new iPad. Also there i get the above error code for some apps. But also there some are installed without any problems.
If i install the apps trough the App Store once again, it's working.
Has somebody any idea to solve the problem?
Thanks

I experienced a similar problem as it occured to Edgar. After a painful update of my iPhone to OS 4.0 none of my apps was installed on my phone. I tried to sync my iPhone via iTunes and everythng seemed to by right.
But at the end of the sync I was told that some of my apps (to be honest: not one) could not be installed because of "an unknown error ocurred: (0xE8003FFE)"
Even after reboot of my iPhone, an update of iTunes and a second try could not avoid this error.
I think that this is a severe problem, because I'm using some apps for my buiness.
I'm also looking for a solution for this problem. Is there anybody who can help?
Regards and thanks in advance

Iphone 5 error code (3)

I finally decided to upgrade to ios7 but I go stuck in recovery mode. Then when i tried to restore my phone, I kept getting this message. I've googled and searched the forum for what this error means but I've yet to find an answer. Can anyone help me here?

Anyone knows what this error code even means? Apple doesn't even have it in it's listing of error codes.

Iphone syncing error code:

After installing LION and ios 5 update i now keep getting this error code (0xE8000065) when i try to sync - also my photos are not syncing? does this have anythin

Do you have Parental Controls enabled?

IPhone 5 error code 21 or 3194 please help!

I have got iPhone 5 I am trying to restore keep getting error 21 or 3194, i tired different laptop still the same problem. Antivirus is ok or itune is update to. so please help.

Hi there abz1234,
You may find the troubleshooting steps in the article below helpful.
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
Error 1015 might happen after making unauthorized modifications to iOS, also called "jailbreaking."
Resolve communication issues
Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
-Griff W.

Iphone syncing Error code 1156

I sync my iphone every other day or so and have never had a problem. But today I am getting an error message. What happened?
New iPhone 4s

Do you have Parental Controls enabled?

TS3694 I TRIED TO RESTORE MY IPHONE AND ERROR CODE 1015 SHOWS WHAT DO I DO

i tried to restore my iphone 3g but error message 1015 shows up,what do i do

From the article that the question was posted from:
Errors related to downgrading iOS
The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

Iphone 4S error code 36

Similar Messages

Maybe you are looking for