Iphone 4s fails to restart after installing ios 5.1 & then restoring from backup ?

                                        I have restored My Iphone 4s to Os 5.1 Yesterday ... every thing went fine ..... at the time of restoring it from my previous backup ........ iphone fails to restart ..... it is in continous loop of apple logo and busy icon thereafter .. can anybody help ????

In that case, if everything else has failed, you can restore your iPhone by putting it in to DFU mode.
Follow the steps precisely.
1) Connect your phone to computer. Open iTunes (if it doesn't open automatically).
2) Turn your phone off. Turn off the device by holding down the sleep/power button in the top right corner and Home button at the same time. A red slider will appear. Slide it to the right to turn off the device. Alternatively, keep holding both buttons even after the slider appears and the device will turn off. Let go of the buttons when the device powers down.
3) Put iPhone into DFU mode. Hold down both the top (sleep/wake) and home buttons for exactly 10 seconds, then release the top (sleep/wake) button but keep holding the home button until iTunes displays a message stating that a phone in recovery mode has been discovered. Let go of the Home button.
4) Device screen is Black. If your device's screen is black, you are in DFU Mode. It may appear that the device is turned off, but it's not. If your phone displays anything, you are not in DFU mode.
5) Restore. Press the restore button and allow the phone to complete the restoration data. After it is done, select setup as a new phone. (Preferable)
Restore your backup (optional). Next, you can restore the phone again in the normal fashion (not DFU mode) using the most recent backup rather than setting up as a new phone. However, this may cause the original problem to return in some cases. If the problem returns, follow steps 1-5 again and setup as new. Do not restore from your backup afterwards.

Similar Messages

  • Iphone 4 won't open after installing ios 7.1

    Please help. My iphone 4 won't open after installing ios 7.1.. I already connected it to my pc but still didn't open. I waited for a long time, press the on/off, home buttons but still didn't work. Thanks Jah bless all..

    Honsetly I do not know if they will charge you, however apple products usually have a one year warranty, such as your charging cable, might. But if you tried to use another charging cable then you will want to make an appointment with Apple. good luck

  • HT1414 My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to all upon and need the r

    My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to call upon and need the restore to retrieve info onto my phone, I am a real novice to this...... please help, !!!!

    If anyone else is looking for a solution to this same problem, I was able to get it working looking through several older discussions.
    The solution was to use the password that I had on my iTunes account the very first time I set up the iPhone about a year ago.  I changed my iTunes password about 10 months ago;  but apparently, the backups continue to use the password that existed when the phone was first set up.
    A couple of troubling things with this are that 1) I didn't apply a password when I did the backup this afternoon so I don't understand why it was required when I did the restore a few hours later. and 2) it makes zero sense why iTunes would not be smart enough to use the current accout password when requiring the password to restore from a backup made with no password. 
    I thought iTunes and Apple were smarter than that.  With so many posts stating exactly the same problem, it is clear that this is bug in the software. 
    Best,
    Craig

  • Just bought new Mac pro  when I sync my iPhone 4 i lost all my contacts on the phone .tried restoring from backup  no luck .is there any way I can retrieve my contacts

    Just bought new Mac pro  when I sync my iPhone 4 i lost all my contacts on the phone .tried restoring from backup  no luck .is there any way I can retrieve my contacts

    Why don't you just restore the to your pc from your most recent backup? You'll get the warning about erasing the media on the phone, but since you'll have all of your media and apps restored from backup, you shouldn't have much of a problem.

  • I have an iphone 3GS and I tried to upgrade the software, After it finished I tried to restore from backup and even though the itunes says there was a backup, After trying it comes up with error there was no backup to retrieve from. Can I get it back

    After updating my iphone 3GS I tried to restore from backup and after choosing the backup and syncing, it keeps coming up with error there wasn't any backup to restore from. Can I get it back or have I lost all my info ?

    See if these Articles help resolve your issue,
    Troubleshooting Backup Issues
    http://support.apple.com/kb/ts2529
    http://support.apple.com/kb/HT4946

  • After ios 5 update and restore from backup my passcode doesn't work, what happened?

    yesterday iupdated my ipod touch 4g to ios5 and i selected to backup from an itunes backup i made yesterday morning, but after doing so, my ipod went to sleep, and when i tried to unlock it, it told me ipod disabled wait 1 minute, after a minute i tried again but then  it said wait 5 minutes, why isn't my passcode working?

    Restore from Backup once more. Passcodes are not restored in backups, so you should be able to get on the iPod without a passcode, then go into Settings and set up a new one (or the old one if you want).

  • How to update new iPod to iOS 5.1 then restore from previous iPod's backup

    If I want to restore my 'new' (refurbished) iPod from a back up of my old one, I need to get iOS5.1 on this one.
    I can't restore it right now because I don't have the computer it's synced with, and I was planning on getting iOS 5.1.1 on my old one before it broke.
    This is what I think I should do (when I have the right computer):
    Update software to iOS 5.1
    Restore from backup.
    Update software to iOS 5.1.1
    right?
    The only thing is, I will have to set up my new iPod 'as new iPod' to update the software because the option isnt there until your iPod is set up in iTunes (keep in mind, I'm not using the computer with the iTunes I will be syncing it with for the rest of its life). Will this change anything?
    And should I wait to do all this until I'm on the computer with the normal iTunes I'll be using, or does it not matter because I was planning on restoring it anyways?
    Pleaaasee hellppp!

    I don't have my old iPod, just the refurbished one, but I backed up my previous one beforehand when it was connected to my computer.
    On my new one, I need to update it to iOS 5.1 to to be able to restore it from a backup of my old iPod because that's they system the old one was using, and I also want to update it to iOS 5.1.1, which I can't do right away or I still won't be able to restore it. I figured I would have to:
    1. Update Software of new iPod to iOS 5.1
    2. Restore new iPod from backup of old one.
    3. Update software to iOS 5.1.1
    Am I right?

  • Iphone 4s doesn't vibrate after installing IOS 8.1

    My Iphone 4s, 32GB lately doesn't seem to vibrate and i suppose it is after the recent update of IOS 8.1 . It does vibrate when i do certain tasks like keying in a wrong password or when i go into Settings>Sound to ensure that vibrate is on for both 'ring' and and on silent. I have restarted(power off and on) it twice and it hasn't helped. i have also just toggled the On/off on the vibrate option, none of which worked. Iam unsure whether this problem had crept while installing IOS 8 itself, since wasn't discernible until lately as i have been getting more calls than normal due to a frenetic time at office. Kindly help with any suggestions or let me know if it is a problem specific to my phone or a software problem which will get rectified in eventual update releases. Other details : It has approx 5GB of space left. All other functions work as desired.

    Did you also try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting.
    If this does not work, and to rule out a software issue, set it up as new device, explained here:
    How to erase your iOS device and then set it up as a new device or restore it from backups
    You may try without using the latest backup first, in case it contained damaged data, causing this problem. If it works after that, use the backup to restore from.

  • My iphone doesn't turn on after installing ios 7.0

    After installing the IOS update automatically this morning my iphone 4 32 g is hanging on the apple startup.. Here is my predicament. My laptop crashed last week and i had to reinstall it..no itunes yet!   One other thing is that my standby button on top doesn't always work so shutting it off is a problem!  HELP!!! What can I do?? 

    try resetting the phone, hold down the powerbutton and the home button untill you see an apple logo, this will reset the phone (you will not loose any data by doing this).

  • '09 MacBook Pro won't start up after installing new hard drive and restoring from an external hard drive.

    I am in the process of replacing my hard drive and have run into a problem. I reinstalled OSX 10.6.3 using a DVD I bought off Amazon. That went well and I then restored my hard drive using an external and Time Machine.
    After that, things still looked good but I couldn't log in to my user (and access my MacBook) because my password wasn't working even though my hint was correct. Yes, I am POSITIVE my password was correct; I even tried a couple other passwords to humor myself. I then gave up and decided to restart the computer.
    Now my MacBook won't start up at all. It goes o a gray screen with a still loading symbol for a couple minutes and then goes to a solid light blue screen. I've tried starting up while holding command+R and I tied holding just command and neither worked.
    Did I install the wrong OSX because I didn't use the same DVD that came with the laptop? Is there something wrong with my hard drive already?
    Please help =[

    You probably bought the wrong RAM that has different pin assignments, so it won't fit in the slot. Return it.
    I bought 4GB Memory online for my MacBook, so I could get it to run twice as fast.
    Doubling the memory does not make your computer run twice as fast.

  • I updated my iMac to Mountain Lion. All the files were deleted. I have Time Machine backups. When I restart the mac pressing Command R to restore from backup it shows the previous OS X (Leopard) beside the date of the backup. Will it go back if I restore?

    I updated my iMac to Mountain Lion. All the files were deleted. I have Time Machine backups. When I restart the mac pressing Command R to restore it from the backup it shows the previous OS X (Leopard) beside the date of the backup that I want to select. Will it go back to Leopard if I restore it from the backup?

    No, it won't revert to the prior OS X but you you may have third party apps installed that were compatible with Lion that may not be compatible with Mountain Lion.
    App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS
    After you restore from TM, check HD > Incompatible Software

  • IWeb wont work after MAC OS X upgrade, and restore from backup

    I upgrading to Mac OS X 10.5.2, and reinstalling iWeb 08, and restoring my website from backup, iWeb does not recognize my existing website. When I opened iWeb for the first time, it had the option for creating a new website, not recognizing my existing website. I could not see an option to "open" or "import". How can I get it to recognize my existing iWeb website?
    We website is located in my <user home directory> Root directory. I have also tried placing it in the <user home>\Sites directory and relaunching iWeb with no success.

    I made a full backup of the hard drive before I repartitioned it for MAC OS X. I Once the install completed, I copied over the <user>\Domain-Name. I wasn't aware of the one in >library>application support. I went and looked on my backup and could not see anything resembling my domain name or iweb under >library>application support. Can you give me a little more information on this or where it could possibly be? I'm sure that I'm really close to getting this figured out.
    Thanks!

  • Iphone 4S won't restart after downloading ios 8

    I tried holding the home button and on/off buttons simultaneously; that didn't work.

    Try and conect IPhone to computer via usb ITunes and restore IPhone Bsydd uk

  • My gmail calender and  iPhone calender no longer synch after installing ios 5

    kann mir jemand helfen, meine kalender syncronisieren nicht mehr.
    can anaybody help me, gmail and iphine calender doenst synch any more

    problem solved

  • IPhone 5 Restore from Backup apps won't sync

    I had to reinstall IOS 8 and then restore from backup.  The restore works fine.  When the phone is syncing, at step 5 it says "Syncing apps".  It gets stuck at number 2.  No errors, just sits there.  I have let it sit for 10 hours.  This happens if I restore from a local backup or from iCloud.  My phone is working now, but has no apps, no content, etc.

    I had this exact problem when setting up my new iPhone 6. My solution wasn't pretty as I went through and clicked off install for all the apps, got a successful sync without apps then clicked them all back to install and synced again. I got all my apps installed, but lost all my folders and had to redo organizing over 350 apps into folders.

Maybe you are looking for

  • Problem printing files to Adobe PDF printer using VBA

    I have an Excel project. Part of the code prints the active sheet range as a PDF file. Later code then sends the PDF file as an e-mail attachment. The Code was originally written using the free application PDFCreator and works as intended. However th

  • IDK for Lotus Notes/Domino

    A customer has asked us if we can build an IDK for Lotus Notes/Domino in Lotus Script. We've validated that it's technically possible and now it's time to figure out how to approach the problem from the business side, i.e. do we do it as a consulting

  • Setting up OEM

    Hi I'm trying the setup OEM for managing all the databases from console. We are running oracle 9.2.0.7 on SunOS 5.10 Generic_118833-20 sun4u sparc SUNW,Sun-Fire-V490. when i do agentctl start agent DBSNMP for Solaris: Version 9.2.0.7.0 - Production o

  • BI 7 Upgrades Components

    What are the components/steps that form part of a BI 7 upgrade?  For example do you need to carry out a PI upgrade etc? Thanks

  • Don't have privileges to delete files...

    i installed crossover and i accidentally used the win98 bottle. i am using crossover for steam to play counter-strike. anyways, i deleted the win98 bottle and i am still finding Steam files on my HD. when i try to delete them, i get an error message