IPhone 4s Flash Does Work With OtterBox Cases

I found that the flash on the 4s would not work with many different cases. I can confirm that the flash does work OtterBox cases.

Did I mark it as a question, if so I'm sorry. It was only info for anyone interested in cases for the new iPad.

Similar Messages

IPhone 5s doesn't work with Mophie case on

I bought Mophie last week at Verizon store. I am a caretaker and thought it would be great however I had to take Mophie off as when I have gone to recharge twice the screen zooms out of proportion AND worse phone will not work so off it came and phone is fine. Phone is important and has to be dependable. I have 5s phone With 5s case. Any suggestions as for now I am keeping case off

Switch off zoom by double tapping with three fingers. Permanently disable it in Settings > General > Accessibility.

HT1665 I have the iPhone 4S and would like to purchase docking device6. I have the Otter Box Camo case and would like to know which dock will work with the case ON. Thank you.

I have the iPhone 4S and would like to purchase a docking device. I have the Otter Box Camo case and would like to know which dock will work with the
case ON. Thank you.

it might be better to contact otterbox to find out from them what they made it compatible with.

Iphone 4 the mike does not work when making a call. it does work with speaker phone and face time

Just activated new Iphone 4 and the mike does not work when making a call. it does work with speaker phone and face time. Any known fixes?

My wife's iphone 4 also has your same no ring problem as does my iphone 5 just less often. I called her iphone 4 at home from where I work 20 miles away on my iphone 5. With her phone in 3G mode ONE call went through and 9 went to voice mail in 10 tries. This is a 10% sucess rate!! I also could listen in real time from the wired work phone and the wired home phone. She turned off 3G mode and it went to "O" mode at the top left of the screen after the ATT. In this mode it rang on the first ring tone 5 times out of 5 tries which is 100% of the time. I have learned that the calling party will hear up to 4 ring tones when placing a call on the ATT network. If the ring tone changes volume slightly before the 4th ring then and only then will the cell phone start to ring. If the ring tone does not change after the 4th ring you get voice mail. If the calling party does not leave a voice message there is never a missed call displayed on the iphone. If the calling party does leave a voice message a few minutes later the iphone dings for arriving voice mail but still no missed call indication.
This appears to be related to the time of day and the ATT tower that the receiving caller is using. Tried other towers and it works in 3G mode 10 times out of 10 tries. Apple replaced the first iphone 4 with a new phone, no improvement. ATT replaced the SIM card and no improvement. ATT so far is clue less. This has been going on every since we got the new iphones which is 4 months. The ATT web site also describes this same problem from several years ago. Has anyone got better information?
Thanks

Need dock extender cable that works with bumpre case

Hi,
Putting a bumper case on an iPhone 4 completely resolves the antenna issue (at least it has for me). The problem is that third party dock connectors such as my car charger won't work with a bumper case because the bumper case is made to exactly fit an Apple manufactured dock cable and the dock housing on my charger is to big to fit. Does anyone know specific extender cables (manufacturer and part number) that will work when the phone is in a bumper case?
Thanks,
Rob

I Had the same problem , went on this site to purshase dock extenders and cables
http://gizmomix.com/shop/accessories/2-extension-dock-extender-adapter-for-iphon e-5-5s-ipad-lifeproof-otterbox-case/
http://gizmomix.com/shop/accessories/dock-extender-adapter-extension-cable-iphon e-5-5s-otterbox-lifeproof-case/

IPhone 4S doesn't work with car adapter

My wife and I upgraded our 3GS phones to 4S. We have an aftermarket iPhone adapter in our car, I don't recall the brand, but it worked fine with our Toyota Camry sound system. We could charge our phones and play music using the factory stock CD transport controls with the adapter. When we plugged in the 3GS phones, we would get a message "This accessory is not optimized for iPhone..." but once the message was dismissed it worked fine, even with iOS5. Howwever, my 4S phone does not work with the adapter. When I plug it in it charges, but I don't get the error message and the music function does not work at all. Strangely, my wife's 4S works fine. The only difference is that hers is 16 GB and mine is 32 GB. I tried removing apps and hard re-starting, to no avail. Is it possible that the hardware connector on my phone is defective and the contacts for music playback aren't functional? Any other suggestions?

To update my original post, I discovered that my 4S does work with my JVC car radio when I use the Apple USB cable that I use to sync with my PC. This happens to be the cable that came with my 3GS, but it works fine to sync the 4S. I don't know whether the short non-Apple cable I had in the car is broken, or whether something about the iPhone has changed to make it obsolete. In any case, I'm back in business!

IPhone 4S doesn't work with car stereo

For about 2 years I've been using my iPhone 3GS connected to the USB input of my JVC car stereo. I just upgraded to the 4S and the stereo doesn't recognize the phone at all. Is this a bug of some kind?
Thanks!
Randy

To update my original post, I discovered that my 4S does work with my JVC car radio when I use the Apple USB cable that I use to sync with my PC. This happens to be the cable that came with my 3GS, but it works fine to sync the 4S. I don't know whether the short non-Apple cable I had in the car is broken, or whether something about the iPhone has changed to make it obsolete. In any case, I'm back in business!

IPhone original doesn't work with Belkin TuneBase FM after 2.0.1 update

iPhone original doesn't work with Belkin TuneBase FM after 2.0.1 update

Firstly, XE 10.2.0.1 isn't the same as 10gR2 10.2.0.1
It was released a bit later and had some fixes that were in later 10.2.0.x patchsets (and also had some different security settings). Maybe they should have gone with 10.2.1.1.
Second, the embedded PL/SQL gateway was okay for XE, but isn't supported for Apex on the Standard/Enterprise Edition until 11g. It doesn't mean it never works, but it does mean that you shouldn't rely on it.
That said, there are other issues with 10.2.0.1 so I'd recommend going for the latest patchset anyway.
Thirdly, if you get the XDB login dialog box, something has gone wrong. For the embedded PL/SQL gateway, XDB is acting as a virtual webserver. Generally what should happen is you connect to the webserver (XDB) and request a page (the APEX login page) and XDB should give it to you, no questions asked.
If it asks you to login then the XDB webserver is running but is trying to get authorisation before it gives you the page. [By the way, if it does prompt for a username/password, it is expecting a database username/password, not an apex one or an O/S one] I'd suspect something is wrong with the setup.
What happens if you ask for a simple image like
http://URAN:8080/i/bottom_left.gif

My iPhone 4S is not working with my yahoo mail

my iPhone 4S is not working with my yahoo mail i can receive but can't send out. what should i do? i just change it for a new 4S n still doing the same

post in the iPhone forum. This is the OS X 10.7 forum.

I m in from bangladesh 7days ago I bought an iphone 4 but not work with sim card. no service.

7days ago I bought an iphone4 from my friend Mithu who come from Singapore.
He told me he that after 7days he come dhaka and open my iphone by using sim. but 4days ago he died on road accident.
He didn't give me any documents & I also knocking his family for that but said they didn't know about iphone. but i cut a sim & insert it in my iphone but showing no service, some time no sim.
How can I work with my iphone,
plz plz plz advise me. I hv not enough money to buy another one,
Plz help me remembering steve jobs.
Version------- 4.2.1(8C148).
Carrier Lab 9.0
Model MC603B.
Serial---8602613MA4S

The iPhone 4 may not work with a cut down SIM. Get a microSIM from your carrier when you set up service.

HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

Flash player work with Safari, but not with Internet Explorer

My flash player had a problem so I uninstalled it. I had a problem downloading the player with Internet Explorer, so I successfully download it with Safari. The player works fine with Safari, but I cannot get it to work with Internet Explorer 8.
I used to have the Flash Player 10 Active X (10.1.85.3), which I had uninstalled.
I now have the Flash Player 10 Plugin (10.1.85/3)
The problem I had downloading the player with IE was that the "allow Active X" information bar never appeared and I was unable to see any download at all.
How do I get flash to work with my Internet Explorer 8 (8.0.7600.16385)?

This adobe web site worked easily for me, when I needed to install adobe flash JUST for IE8.
http://get.adobe.com/flashplayer/otherversions/
All you need to do is choose your OS in the top window, then in the bottom window choose "Adobe Flash Player 10.1 for Windows Internet Explorer", and voila, that is what adobe installs!! Give it a go. I had problems too, before I foud this. Diligent

Iphone 6 doesn't work with Uconnect

My iPhone 6 won't work with Uconnect. I can connect the phone, but as soon as I make a call it doesn't come through the speakers. I have tried a number of things suggested including deleting the blue-tooth connection both on the phone and the car. I have reset the network on the phone. I have done a hard restart on the phone. My Uconnect has the latest software upgrade. Please, please help!

i should have stayed with android as it worked with uconnect....it even allowed my jeep to read the text messages to me and I could respond...now iphone 6 and software not working ... Apple aweful at support ...

Iphone 4S won't work with bose dock

Iphone 4S won't work with Bose Dock Speaker

I have this same problem newly purchased iPhone 4s will plug into my Bose Dock. It will still charge and connect as if to play music but no sound will come out

IPhone 5 doesn't work with Mac OS 10.5.8 - do I need to ugrade to 10.6 and then upgrade to Mountain Lion or can I just upgrade to Mtn Lion right away?

iPhone 5 doesn't work with Mac OS 10.5.8 - do I need to ugrade to 10.6 and then upgrade to Mountain Lion or can I just upgrade to Mtn Lion right away?

At least to 10.6.8. You must do this to upgrade to Mountain Lion.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

IPhone 4s Flash Does Work With OtterBox Cases

Similar Messages

Maybe you are looking for