IPhone 4s goes straight into ansaphone.

IPhone 4s goes straight into ansaphone when someone try's to call me.

TThanks I checked my do not disturb. and it was on my favorite not every call. Guess that's why it worked sometimes.

Similar Messages

Iphone rings goes straight to voicemail

iphone 5 to iphone 5 - rings goes straight to voicemail. This problem does not appear in our local service area. This issue has happened in AK and now in FL. I don't know if this is a Verizon issue or iphone issue. Also when texting my outgoing message shows in blue box, the receiver receives text in white box and the reverse occurs when responding to text message.

The call problem is a carrier issue. Contact Verizon.
There is no apparant problem with your iMessages as you describe. What do you think is wrong?

Can anyone explain why some of my mail goes straight into Archive and doesn't show up in my Mail Inbox?

I don't understand the Archive folder. My Mail Inbox receives mail for my Mac, Gmail & AOL accounts - but sometimes after I've read an email I then can't find it when I check back for it later. And then I discover it's in the Archive folder, though I haven't done anything to make it move to Archive. So it must be happening automatically, and seemingly at random. Can anyone explain how this could be and how I can prevent it continuing to happen? Thanks.

Andy, thanks for your reply. I was just going to post that I seem to have solved the problem.
What I ended up doing was to first back up the mail folder. Then I created some Saved Mail folders and did a search to find the e-mails that weren't displaying and put them into a saved mail folder. Then I went in and deleted the e-mail account that wasn't displaying mail. (It would show the number of new messages in the red circle, but didn't show any messages being in the inbox when you clicked on the account.) Anyway, after trying to backup everything and deleting the problem e-mail account, I rebuilt the inbox and then re-entered the information for that account to set it back up. After I did this, messages come into the account just fine and show up just like they should.
The file structure looked to be the same as what your finder image shows. When I did the search which let me find the messages, all I noted was that it would say they were either in the Inbox, Sent Mail, Trash, etc. But, once I had them showing in the search window, I could copy them to a saved mail folder and view them without a problem.
Since this wasn't my computer, I'm not sure if anyone tried to change account settings, but not as far as I know. They just said it happened about 2-3 weeks ago.
Thank you for your help. I guess it's going to be one of those computer things that you don't know why it happened, but at least I know what I did that seems to have fixed it.

Sent emails in Mac Mail going straight into Outbox - how can I fix this?

For several days now my emails sent from Apple Mail, which is certainly ( when working ) the best email service I've used, has failed to send emails and instead lodges them in my Outbox, where they remain, and the Mail Activity slot at the bottom datailing the progress of outgoing messages
tends to come to a halt halfway along the progress bar.
Very frustrating.
Any ideas?
Thanks / Jim Raff

Launch the Connection Doctor (Mail.app Window > Connection Doctor) and (if you see any red-dot warnings from the first pass of the tool, and you probably will) open the details drawer and re-run the connection tests. If you can't figure out the error from what details are generated by the tool, post the expurgated data — edit out any sensitive data — and post it here.
Also (though this probably won't help) repair your mailbox. Mail.app Mailbox > Repair.
See if you can access the target mail via the web app, and see if there are any issues with that server; if things are working "normally" via the web interface. (Details of the web interface vary.)
Also confirm the outbound mail message doesn't exceed some limit on the mail server, such as the total storage quota for the target mail server, or the size of the message being sent; something that might cause the message to be rejected by the mail server.
In the above, I'm going to assume you are not running OS X Server here, and are just running 10.6 client. If you are running OS X Server 10.6, then you'll want to have a look at the mail server log files at a start. OS X Server has its own mail server, and debugging that is somewhat more complex than debugging the Mail.app mail client in OS X software, and some other mail server.

Material goes straight into 'unrestricted' even after QI has been setup

hi SAP gurus,
QI has been setup for this material, in the PO and also MIGO goods receipt, stock type has been defaulted to "QI" as well.
however after the GR has been posted and i checked MMBE, the stock went straight to "unrestriced".
how to i know if there's any user exit or setup in the QM that causes this?
thank you very much.

Hi,
Were you able to get an inspection lot for this GR? Is the Q-info record maintained for the material?
This could be another reason besides the 'Post to Inspection stock' activation.
ntn

Just bought an apple tv and it wont stream music from my imac. when i click on the apple tv music icon it goes straight into the itunes store and so i can only access the music i have bought from itunes not the music i have stored in itunes on my computer

i just bought an apple tv and it wont stream music from my imac. when i click on the apple tv music icon it accesses the itunes store and brings up only that music i have purchased from apple instead of all the music i have stored in itunes on my imac.

The music icon will only access your purchased music. You need to go to the computer icon. It must be on and running iTunes, and home-sharing enabled in order for it to be accessible to Apple TV

Hi. Finally updated to 19 which continually crashes on start & goes straight into Crash Reporter. Also happens in safe mode. Running Mac OS 10.6.8.

Mac OS 10.6.8 / 2.2 GHz Intel Core 2 Duo / 1 GB 667 MHz DDR2 SDRAM
Crash ID: bp-da9d7cd5-96db-4310-91a1-aeb3a2130308

Please try step 5 from this [https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems#w_5-reinstall-firefox article].
Thanks!

BT Wholesale Tester now goes straight into the TAP...

...directly after the initial centred 3 line down/up/ping message, bypassing the first further diagnostics test with the wide red and green bands?
Could someone explain why this is now happening please?
(Incidently, for those who said my speed wouldn't increase after having my DLM reset Tuesday my DL speed has increased from 44Mbps then, to 46Mbps now!)
Solved!
Go to Solution.

See this link about various tests. It is a few years old but I would imagine still relevant.
https://www.btwholesale.com/pages/downloads/Community/Broadband_Community/PT_Customer_handbook_v6.pd...

My iPhone 5 on EE 4G goes straight to voicemail when people call me and I'm connected to LTE? Is there a solution to this other than turning off 4G?

When I am connected to LTE (EE network) my iphone 5 goes straight to voicemail and I can't receive calls?! Anyone know a solution to this problem?

Hi
I have just spoken to EE about this very issue.
Apparently the sim is timing out the call before you even get it and passes it to voicemail.
I was given the following 2 codes by their support to "call" with the phone.
##002**89#
##002**11#
Then re-boot the phone.
This effectively turns off the automatic re-route to voicemail but standard voicemail when not reachable still works.
I still need to play with the voicemail settings a bit but it seems to work.
Second.
I was also getting an issue where I was simply loosing service at random times even though I was not moving.
THIS issue apple is woking on. The problem is cause when moving between 3G and 4G signals, sometimes the phone just looses the service.
A fix for that (Till apple comes up with one) is to simply go into settings and turn off LTE unless you really need it.

IPhone 5S, AT&T, goes straight to voice mail

My wife's iPhone 5S goes straight to voice mail .. no ring. Anyone else having this problem? Is it the phone or is it AT&T ?

razmee, you did the job! Thanks ... alex

Ipod says needs to be restored, but when plugged into pc, goes straight to disk mode

so this is my friend's ipod classic [[used to be mine]] and it dropped and hit the ground from like a few inches, apparently. when it's not plugged in and i turn it on, it gives the ipod needs to be restored screen. I plug it into my computer and it goes straight into disk mode. i can 'eject' the 'disk' and then it shows up in itunes, and i go through the motions to restore the device. only, once it starts restoring, i get error 1439 and it boots out. If I reset the ipof [[menu and center buttons]] it just goes back to disk mode.... help! i really wanna fix it....
i've tried: reseting ipod, plugging ipod into a different usb port, updating itunes....

I think that impact has jarred your Hardisk.
Do the iPod Disk Diagnostic as posted earlier by tt2, it wont fix you problem, but help in troubleshooting.

Logon with multiple users goes directly into user without password prompt?

I upgraded to Lion after Hard drive crashed and was replaced by apple even though I had Lion OSX they insisted that I upgraded which I eventually had to do.
The problem is as follows:
When PC is intially turned on the User selection screen does not appaer and the system goes straight into the first account created without password validation. All accounts setup have PW added to prevent my kids from accessing th PC. However if I loggoff the user screen appears and PW must be used. This does this on ever restart or turn on. Tried resetting & re adding the accounts but same issue occurs.
Any help on this issue will be appreciated.
Thanks

System Preferences -> Security -> General -> Disable automatic login

My "Themes" page does not appear when I play my DVD- it goes straight to playing the slideshow.

I have never been on this forum so I am not sure what I am doing exactly. I went to the Apple store today to learn how to use iDVD. We created a "Themes" page and when I view my slideshow in iDVD everything plays together but once I burned it to a DVD and played the DVD on my computer and DVD player at home the "Themes" page does show up- it just goes straight into playing the slideshow.

Check in the Map mode of your iDVD project to see if the slideshow has been dragged intoi the blue "Auto Play" bin. If that's the case then that's why the findished product begins playing automatically. Just drage it out of that bin, save as a disk image and play the disk image with DVD Player to see if the menu shows up as expected. If it does then you can burn the disk image to disk using Disk Utility as 4x or less.
Click to view full size
OT

How to stop iphone 5 going to voicemail?

When people try ringing me my iphone 5 goes straight to voicemail? But if I turn my phone off and on again it works okay for a little while.
Has anyone else had this happen and solved the problem?

it didn't work

TS3276 I can receive emails, but I cannot send emails. This just started happening. I have an iPhone and I can send emails from my phone fine. It's just not working on my Macbook. Every time I try to send an email it goes straight to my outbox. Can anyone

I can receive emails, but I cannot send emails. This just started happening. I have an iPhone and I can send emails from my phone fine. It's just not working on my Macbook. Every time I try to send an email it goes straight to my outbox. Can anyone help?

Thank you for heading me in the right direction. I reset my Mail account for Outgoing Mail Server to outbound.att.net:(customer ID)@att.net (instead of smtp.att.yahoo.com, per Apple's online troubleshooting information). I'm not sure what "(Offline)" means when it appears at the end of my Outgoing Mail Server (SMTP)?? In the Advanced box I clicked on "Use custom port: 465" and checked "Use Secure Sockets Layer." Authentication: Password; I have correct User Name and Password put in. After doing all this, when I try to send emails again today, they go directly to the Outbox and sit there.
What's curious is that my first sent email this morning did go out using the Outgoing Mail Server, smtp.att.yahoo.com: (customer ID)@att.net(Offline) but subsequent emails I tried to send with this server were rejected with the message: "Cannot send message using the server smtp.att.yahoo.com (etc.). The SMTP server doesn't support TLS(SSL) on port 587. Verify your account settings and try again." That's when I tried resetting my Outgoing Mail Server to outbound.att.net (etc.), as mentioned above, and was unsuccessful in sending out any further emails. I guess my next step is to contact my email service provider, AT&T, and see if they can help me. Thanks, again, for taking the time to respond and for giving me your input! Much appreciated!

IPhone 4s goes straight into ansaphone.

Similar Messages

Maybe you are looking for