IPhone 4S GSM full bar with 3G but not working!
Hello everyone.
Here is an issue I can't beat.
iPhone 4S, not locked to carrier. Suddenly I noticed that may people start to complain to me about my phone is switch off. But same time phone is on and has full GSM bar with 3G. Once I make an experiment, when my friend Skype me about my phone is off i tried to make a call, but call is won't connect, i even can't hear a beeps. I tried to reboot the phone and in a few hours story repeats. Then I tried to resent network settings. Won't help. I tryed to restore my iPhone with iTunes with latest firmware. Not luck. Last thing I did is replaced my SIM card with my carrier. No luck. I saw on internet, that there are a lot of people having same issue with no luck of fixing it. My phone is on warranty, but or local dialer won't replace it, because it's bug not consistently seen. Any suggestions?
Contact the carrier to rule out network/account issues.
Beyond that, basic troubleshooting is reset, restart, restore (first from backup then as new). If all of this has been tried and does not resolve the issue then the device has a hardware issue and will need to be replaced.
It is up to Apple or the Authorized Agent in your country to determine what qualifies for hardware replacement.
Similar Messages
-
My reminders are not syncing between my iPhone and iPad. The iPhone seem to be sync with iCloud, but not iPad
Hi TexasIllini,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iCloud: Troubleshooting iCloud Reminders and Tasks
http://support.apple.com/kb/ts4000
Cheers,
- Judy -
Ipad/iphone accepts browser proxy setting with IPSEC but not PC or Mac
I have two ASA5505's in failover and set up the the IPSEC client group policy for non-inherited browser proxy settings. I have a manual IP address and the typical port 8080 configured.
What is not working are Windows and Macbook laptop clients. iPads and iPhones accept the policy even though the built-in Cisco IPSEC client does not have a proxy setting on the ipad/iphone.
On a Mac, under Network Preferences, I can set the proxy manually for that VPN profile under any of the "Locations" and it will use the proxy settings. But, if I leave everything blank, even on a Windows 7 PC (Internet Options, Connections, LAN Settings), neither platform seem to accept or maybe it should be "receive" those settings.
I turned up the packet capture on the ASA and saw the ipad/iphone pointing all their browser traffic to the proxy:8080. But the Mac and PC (multiple hardware tested) are sending their packets to the actual host IP. So, the result is that the ASA sees a packet from the "outside" interface that is trying to go to the "outside" interface instead of the inside interface. In effect, it is trying to do a hairpin. I don't want to configure hairpin, I would rather solve this issue.
I know there are some other work arounds that I could do but I really need to figure out why the group policy for an IPSEC client vpn connection is not working.
Any thoughts? Did I miss something?Enable "Transparent Tunneling" and "Allow Local Accces", under Transport
-
The font bar with Underline, but not bold or italic.
Since upgrading to Mountain Lion, the Mail messages I write will not bold or italic. Apple Store has re loaded all software but the problem still exists.
So, Gap--
You're selecting (or highlighting) the copy you want bolder or italicize first, and then what happens when you click bold or italic? -
Wifi on Surface Pro - installed with ndiswrapper but not working
Hi there guys.
I have installed Arch on a Surface Pro and most things work well.
The biggest problem so far is wifi - it comes with a 88w8797 Marvell Avastar chipset. I managed to find the drivers and used ndiswrapper to install them.
$ ndiswrapper -l
mwlu97w8 : driver installed
device (1286:2043) present (alternate driver: mwifiex_usb)
The ndiswrapper help page says that one should get rid of alternate drivers before enabling ndiswrapper but I have no clue where to start - that seems to be a kernel loaded module (link) but it really doesn't do much apparently.
I did 'modprobe ndiswrapper' but as you can see below, nothing seems to be really happening
# iwconfig
enp0s20u2u3 no wireless extensions.
lo no wireless extensions.
dmesg returns this on ndiswrapper
$ dmesg | grep ndiswrapper
[ 2.996565] ndiswrapper version 1.58 loaded (smp=yes, preempt=yes)
[ 4.230024] usbcore: registered new interface driver ndiswrapper
The gnome network manager, just like iwconfig, shows no able wireless.
I'm at a loss on what to do, any help is greatly appreciatted
Last edited by OttoRobba (2013-02-21 10:26:50)The blacklisting was a good call as I had completely forgot to do so. Made a /etc/modprobe.d/blacklist.conf with 'install mwifiex_usb /bin/false' - nothing changed though, the wireless network still won't show.
# lsusb
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 003: ID 058f:6254 Alcor Micro Corp. USB Hub
Bus 003 Device 002: ID 1286:2043 Marvell Semiconductor, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 045e:0795 Microsoft Corp.
Bus 002 Device 003: ID 045e:079c Microsoft Corp.
Bus 002 Device 004: ID 03eb:8209 Atmel Corp.
Bus 002 Device 005: ID 045e:0794 Microsoft Corp.
Bus 003 Device 006: ID 04e8:6863 Samsung Electronics Co., Ltd
# lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
It seems ndiswrapper is failing to load - I wonder if there is another module claiming the device?
#dmesg
[ 4.191249] ndiswrapper (import:232): unknown symbol: ntoskrnl.exe:'__chkstk'
[ 4.191274] ndiswrapper (import:232): unknown symbol: ntoskrnl.exe:'MmGetSystemRoutineAddress'
[ 4.191295] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisFreeIoWorkItem'
[ 4.191305] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisQueueIoWorkItem'
[ 4.191326] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisFreeMdl'
[ 4.191336] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisAllocateMdl'
[ 4.191346] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisAllocateNetBufferAndNetBufferList'
[ 4.191356] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisFreeNetBufferList'
[ 4.191366] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisFreeNetBufferListPool'
[ 4.191376] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisAllocateNetBufferListPool'
[ 4.191386] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisMAllocatePort'
[ 4.191403] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisMIdleNotificationComplete'
[ 4.191413] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisMIdleNotificationConfirm'
[ 4.191423] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisMFreePort'
[ 4.191432] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisMNetPnPEvent'
[ 4.191443] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisMIndicateReceiveNetBufferLists'
[ 4.191453] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisMSendNetBufferListsComplete'
[ 4.191463] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisMOidRequestComplete'
[ 4.191473] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisMIndicateStatusEx'
[ 4.191483] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisMSetMiniportAttributes'
[ 4.191493] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisSetOptionalHandlers'
[ 4.191504] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisAllocateMemoryWithTagPriority'
[ 4.191514] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisOpenConfigurationEx'
[ 4.191523] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisFreeTimerObject'
[ 4.191533] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisCancelTimerObject'
[ 4.191543] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisSetTimerObject'
[ 4.191599] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisAllocateIoWorkItem'
[ 4.191613] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisMRegisterMiniportDriver'
[ 4.191623] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisMDeregisterMiniportDriver'
[ 4.191648] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisAllocateTimerObject'
[ 4.191663] ndiswrapper (load_sys_files:199): couldn't prepare driver 'mwlu97w8'
[ 4.191827] ndiswrapper (load_wrap_driver:121): couldn't load driver 'mwlu97w8'
[ 4.191926] usbcore: registered new interface driver ndiswrapper -
Menu bar with rollover states not working properly
I have a menu bar that I want to have as a certain size. The
menu items that actually link somewhere are not showing up as the
designated size (150x50px) but the one link that is not linked to
somewhere else in the page looks fine (inventory).
Can someone look at the css and tell me if there is something
contradicting or if there is something I can do?
THank you
You can view the problem page at
http://thebradfordcreativegroup.com/abs/indexold.htmlSorry, I don't have the answers - but you need to see your
site in IE6. It
looks quite different - kind of bloated. Also, the "Quality"
link doesn't
have an arrow.
"Inventory" as you say sits up at the top. FF is fine. Sorry
I can't help
though.
Jo
"joshuataylordesign" <[email protected]>
wrote in message
news:fqia5f$anb$[email protected]..
>I have a menu bar that I want to have as a certain size.
The menu items
>that
> actually link somewhere are not showing up as the
designated size
> (150x50px)
> but the one link that is not linked to somewhere else in
the page looks
> fine
> (inventory).
> Can someone look at the css and tell me if there is
something
> contradicting or
> if there is something I can do?
> THank you
> You can view the problem page at
>
http://thebradfordcreativegroup.com/abs/indexold.html
> -
IPhoto updated to 9.6 to be used with Yosemite but not working.
I upgraded my macbook pro software to Yosemite, and upgraded all my apps, including I Photo, in order for them to be compatible with Yosemite. However when I go to open I Photo it has a no entry sign around it and says I must upgrade as it isn't compatible. It is the most up to date version available but when I go to 'get info' for the app, it says it's version is 9.5. Although as far as myself and the app store are aware it has been upgraded and is 9.6! all apps are fully up to date. So confused, I've googled it and done everything I can think of and no one else seems to have this problem, Please help!!!!
Move the iPhoto 9.5 application to the Trash, then restart the App Store and sign into the store with your apple ID. Open the "Purchased" tab.
What does the button besides "iPhoto" say? If you see "Install" , let it install again. If it says "Open", click "Open" to run.
If you can get iPhoto to run this way, ctrl-click the Dock icon and click "options > Show in Finder", to see, where it is installed. -
Js working with FF but not working with IE
Dear All,
I have created a text field P5_NO1 and in the
Post Element Text
<span style="color:#0000ff;font: normal 1.2em "Lucida Sans Unicode",sans- serif;font-size:12px;"> <select id="unit" onchange="TankUnit();" >
<option> -S-</option>
<option> ml</option>
<option> kg </option>
</select> Units
</span>
the js TankUnit() works fine in FF not in IE
I have an sample in apex.oracle.com
http://apex.oracle.com/pls/otn/f?p=4000:4150:4089089633206316::NO:::
can anyone help me to solve the problem?
bye
SrikaviHi Peter and John,
FF is so... tolerant to accept the value of the option as the same as it is displayed in the select list.
where IE is so... prudence, that we have to explictly tell it
ie Post Element Text in IE should be like this
<select id="unit" onchange="TankUnit();" >
<option> -S-</option>
<option value="ml"> ml</option>
<option value="kg"> kg </option>
</select> Units
bye
Srikavi -
I have the problem of calls getting failed.. Black Iphone 4S 16gb IOS 6.1.3. O2 Network - Airtel India.
I have full bars of signal but cannot make calls. Goes to "No service" then to "searching".
I constantly get "Call Failed" when making calls.
What could be done to solve the problem?Try settings/general/reset/reset network settings. If that does not do it then contact your carrier
-
My iPhone 4S will charge on a laptop but not from a wall plug. I have tried different boxes and different USB cords from the wall but none work. These boxes and USB cords work for other family members with iPhones and a USB cord that works from the laptop won't work from 3 or 4 different wall boxes that work for others. I'm stumped :/
Update: It seems as though the phone will charge if I plug it in and then turn it off. It will not charge while the phone is on. Also iTunes will not recognize it, so I can't sync or anything. I read somewhere that it could be a fuse somewhere?? Or maybe the dock connector. Where is the best place to get this repaired?
-
How do I get my old contacts onto my iPhone 5? Have tried with iCloud, but no luck.
How do I get my old contacts onto my iPhone 5? Have tried with iCloud, but no luck.
I backed up my old iPhone on iCloud, ensuring that contacts was 'on' and then backed up my new iPhone 5. I have surely missed a vital step, but I can't figure it out.
I'd really appreciate any help.
Thanks!
LauraI have also realised that my contacts are not in iCloud. I have backed up my old iPhone several times (today!) and they are simly not getting there. Any ideas?
-
trying to download an instal ios 7 on my iphone 4s, after half an hour into the download it came up with a message saying failed and everytime i try again the download doesnt start. tried downloading from itunes aswel but not working. anyone know why?
The servers are overloaded. There are a hundred million people all trying to download iOS 7 at one time. Try again later
-
Hi there
I ha
Hi there I have a iPhone 3G and it was with O2 but needed to go onto 3 network so someone on my local market unlocked it and the phone was working fine until I tried to update it through iTunes and it always now stops loading towards the end with an error is there a way to get the phone working again please.Shame you had the iPhone hacked as O2 usually unlock their customers iPhones happily.
We cannot discuss your problem as it is in breach of the Ts&Cs you agreed to on registering
However hint ....you have probably trashed it -
My iPhone is requesting to sync with icloud, but it is using on old ID and password. How do I delete the old ID and password?
To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
my phone is iphone 4 (GSM)-american type with IOS5.011 , i have problem with sim card failer (korek type)
Sounds like your iPhone is locked to AT&T. Contact them to see
if you qualify for unlocking.
This link may provide some assistance:
unlocking AT&T iPhones (thanks to wjosten for the link)
http://www.att.com/esupport/article.jsp?sid=KB414532#fbid=Ont7guWFCdY
Maybe you are looking for
-
the problme what i am getting is that. we have fetch data from database which are Questions. now the problme is that when a user click on a question they will get a new page with that particular question with a input ANS field. so for that we are mak
-
I can't download Firefox 9. Any ideas?
I get sent to the download page and it either just pinwheels or brings me to a blank screen. I have tried many different sites that have the download on them and all do the same thing.
-
Win 7 64bit desktop. Set tools --> options --> tabs OPEN new windows in new TAB instead checked. apply/save .. tried from there, tried exiting firefox. tried clearing cache. what else???
-
My account is blocked and its hampering our busine...
Hello, I am really upset and disgusted as I have just recharged my account and my entire account is now blocked. I am not able to use it to contact my customers and its really hampering my business. I would like a refund of my entire money as I wis
-
Compressor creates pulsing blurry images on some clips!!
Rendering from ProRes HD to DVD m2v compressor creates pulsing blurry images on some clips every 15 frames! i had had this happen twice on 2 different clip since the last update to 6.0.3 most of the movie is fine but when I get to a certain clip in t