IPhone 4s hasn't been backed up since February, when connected it runs for a while and then says, backup cannot be completed. Ideas?
iPhone 4s hasn't been backed up since February, when connected to wifi, it runs for awhile in icloud backup, then says, "cannot complete backup". any ideas? I bought additional storage in icloud, have 15 gig now.
Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Similar Messages
-
What is going on? I have never had this problem until I updated to OS 10.10.1. Now apple Tech Support wants to charge me to look into it. It crashes with no error message.
B,
Dag-nabbit! That's what I'm talking about. I installed AdwareMedic and I have every expectation that I'll see great results. I'll have to follow up with a donation. I'm not very savy and you guys have helped me with new confidence. Thank you from the bottom of my heart.
Now, any possibility someone can help me with backing-up with time machine?? My old external hard drive went south and I had to get a new one. Now I can't get it backed-up because it takes too long. There is to much to back-up for an initial try. My computer ends up shutting down/going to sleep and it can't finished a complete back-up. It seems to want to take about 18-20 hours as best as I can remember. I used to be so anal about my back-ups now I am completely disillusioned. -
Hi, can someone help please - my iPhone hasn't been backed up since early August, now I can't seem to get it to back up to iCloud. I have 9GB of space, I have left it plugged in etc for 11hrs, but keep getting the same message " iPhone backup could not be completed" -what dies that mean.?
Hi,
I was facing issues with both backup and FB integration after the iOs 6 upgrade. Before then I did not have any issues with the iCloud backup service, but after a few days, I noticed that it was continually stuck at the Estimating time for the backup and it never progressed.
As any good techie would, I tackled the most pressing issue first . . . FB integration of course.
I had read in a separate post about this solution so tried it . . .
I deleted the original FB app and hard booted the phone. I then went into settings and entered the data for FB integration. Seconds later, I received a text message to my phone - already listed and verified in FB with a 6 digit code to re-enter instead of my password. Seconds later I was verified and then prompted to download the FB app. All backup and integrated.
Then I went into the iCloud backup, turned it off . . . and deleted the last backup. I then re-enabled backup . . . and although I thought I was going to face the same issue, after a few minutes, it moved on from Estimating time . . . to actually backing up. It is now a small way through the backup and seems to estimate that it will take another two hours to complete.
A good nights work. Backup and integration all sewed up. Good luck.
Cheers
Ian -
I'm trying to back up my iphone 4s to my icloud. But I can because of my wifi on my phone don't work! what do i do? i keep getting notifications that my iphone hasn't been backed up since 3/15/12. But i just backed i up to my Mac Book. My Phone has like no storage since i cant back it up. its horrible.
My 4S stopped automatically backing up at night when I updated to the new OS. I cannot manually force it to either. Possibly an issue with the new OS??
-
I performed a software update and the system is installing an update but it has been running for over 24hrs and keeps saying "This may take a few minutes, don't shut down your computer" Can anyone help?
Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time. -
Trying to download photoshop but when I sign in it loads for a second and then says "You've been signed out".
You are no longer signed into your Creative Cloud applications
-
I have been unsuccessfully trying to extend the wifi of my Time 2T Capsule with an Airport Extreme 2nd Gen. It works for a while and then loses configuration. I have done everything possible, disconnected it, reset it but it keeps failing, what to do?
What model and firmware is the 2TB TC?
What firmware is the AE?
Does the AE get good signal from the TC in its current location?
Signal can only be extended that is received intact.
Is it extending on 5ghz? As I remember it a Gen2 AE is only single band, although you can choose either 2.4ghz or 5ghz.
I am fairly sure you are going to tell me your TC is AC model..
I would do a couple of things..
1. Fix the wireless name, make it short, no spaces and pure alphanumeric.
2. Fix the wireless channel for 2.4ghz so it is not going to jump around.
3. Get real results from the AE in its current location for signal strength.. this is really only possible on v5 utility. And that is a double pain with Mavericks because you cannot use it.
Apple have removed all the useful diagnostics from the airport utility. There is next to nothing left. So you need to use the computer and its diagnostics to find signal levels in the location.
http://support.apple.com/kb/HT5606 -
I have been trying to rent movies on my atv they try to load and then says error try again later
I have been trying to rent movies on my atv they try to load and then says error try again
What is your actual internet speed? www.speedtest.net
-
I have iPhone 4, it was working just fine..no I have a problem: it keeps searching for the network and then says no network..it was open to clean from inside..how can I fix the problem
Tap Settings > General > Reset > Reset Network Settings
If that doesn't help, try here > iOS: Troubleshooting Wi-Fi networks and connections -
New W530 Owner - Can I move down to W7 for a while and then come back?
I have a full Windows 7 license and think I would prefer to move down to Windows 7 for a while and have the option to come back to 8 later. My understanding is that 8's key is in the bios.
If I move down to W7 will it install normally?
If I later want to move back to W8 can I install that from any Win 8 Pro install media and it will just recognize the key at that time?
Thanks!http://www.howtogeek.com/133168/how-to-downgrade-windows-8-pro-to-windows-7/
http://www.infoworld.com/t/microsoft-windows/how-downgrade-windows-7-210685
W520 4270CTO i7-2820QM Quadro2000M 1920x1080 Display 16GB RAM 2x240GB Intel 510 SSDs (RAID 0) - BIOS 1.42 - PCMark7:4,568
Samsung Series 9 15-inch NP900X4C-A03US - PCMark7: 4674 -
Periodically, when I have a page up for a while, the page will suddenly change to my google homepage. This has happened frequently and with multiple sites.
I can click the back key to the page I was on. It is not a slip of the mouse since most of the time I'm not touching it.
It is as if a home button has been clicked..it moves forward, not back a page.
Why does this happen? How do I stop it from happening?Bumping
-
I am a windows visa user. I am trying to add a couple of apps to my ipad, which can only be added when connecting to itunes store. I plug in my ipad and it immediately goes into sync mode. When it gets to backing up, this seems to take ages and then i get an error message saying the backup was not successful. What am I doing wrong? I use this computer for my ipod touch and iphone and don't have the same problem with them. This also means I can't update the new version, as the same thing happens. Any advice?
ThanksYour Settings app is crashing. Sometimes, the only way to fix this is by restoring the iOS software but hopefully it will not come to that.
1. Quit the app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
2. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
3. You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again. -
I have a iphone3GS. It could not be boot up. When i press the sleep/wake button, the apple logo appear and then disappear. The password login screen didnt' come on. When i tried to connect my phone to the itune on my laptop, there isnt this button that i can sync my phone with the laptop.
Sounds like your iPhones software may be corrupt. Try placing the iPhone into recovery mode. To do this, follow the steps in this article:
http://support.apple.com/kb/HT1808
Hope this helps
- Greg -
My ipod has been disabled and it says that i need to connect to itunes , however when i connect it it says that i cannot fix because i have a passcode on it please help, im almost bawiling my eyes ... please help
iOS: Unable to update or restore
-
Hi.
My iPad froze with a message "icloud backup" I clicked ok but it will not budge or unfreeze for me to do anything. I tried to power it off with no luck. Please someone help.You posted in the wrong forum, Snow Leopard. You need to post in the iPad forums. It's where the iPad users hang out at.
Maybe you are looking for
-
SQL Loader and Insert Into Performance Difference
Hello All, Im in a situation to measure performance difference between SQL Loader and Insert into. Say there 10000 records in a flat file and I want to load it into a staging table. I know that if I use PL/SQL UTL_FILE to do this job performance will
-
Need urgent help with CS4 please
i got a transferred reg key for CS4 premium volume, the proble is that i have installed and been working with it for ver 10 months now, everythink ok, but recently i had to erase my disk completly cause a virus and now i installed ir again, from the
-
APPLE MOUSE DOESN'T SCROLL IN MAIL?
Suddenly my Apple wireless mouse doesn't scroll (moving finger on top of mouse) in the Apple MAIL ap. It works fine in all other aps/activities.
-
How to find the Datasources for the given table names ?
Hi All, I have an urgent requirement where I ned to find the names of BW Datasources, created for the given table names. Both the tables and Datasources are in BW system only. I can see the table in SE11 but I am unable to find its associated Datasou
-
Alias account not receiving emails question
I setup an alias account under my outlook.com account. The alias account is a btinternet.com account. I sent an email to the btinternet.com account and expected that email would appear in the outlook.com inbox. Is there a "forwarding" step missing?