Iphone 4S i0S6 software, screen going dark

After I updated my iPhone 4S to i0S6 my screen has being going dark randomly, but when you find your way to the brightness section and go to change it its already on the highest brightness setting. why is this happening?

Hello Hello Hello!!!!!!!!!!!!!!! I have same problem for all day after update (iphone 5), after I put id password or click skip, the device reboot for 3 seconds with apple logo then again Hello........

Similar Messages

Can I increase time before screen goes dark on iPhone 5?

Can I increase the time before screen goes dark (to sleep) on iPhone5?

iPhone User Guide (For iOS 6 Software)

On iPhone 4, the screen goes dark and freezes when I start Safari

All of a sudden, today I can't access the internet via Safari on my Verizon iPhone 4. If I click on a link in an email or start Safari, the screen goes dark and freezes. What's up with this and what the fix?

Hi
Try holding sleep/wake + power button for 10 seconds, until you see the Apple Logo.
See how that goes.
Taylor

Screen Goes Dark During iPhone Sync

This sounds strange and I can't seem to find a logical explanation for this. I noticed that I went I plug my iPhone via USB for iTunes to automatically synch, within seconds the screen goes dark. What I have been doing lately is to rest the phone on top of the MacBook Pro, just left of the trackpad. I have also noticed that if I just place the iPhone elsewhere, rather than laying directly on the MacBook Pro, the problem doesn't happen.

That's where the magnetic sensor for the lid is located. It causes the computer to think that it is closed! Now, an iPhone doesn't have a magnet, except in the speaker, so maybe that's what happens. Our your case has a magnet.
I hope this answers your question.

IPhone 3GS screen goes dark...no apparent fix for it

My iPhone 3GS has started having a problem where the screen goes dark. The phone is still active and if you have the right light and strain real hard you can barely see the icons. I have tried everything I know to fix this but nothing works. One thing that did work for about a day was a Reset All Settings, from the General Settings menu. Previous to doing that, I have tried: 1) turn it on and off, 2)hard reset, 3)restore from iTunes. None of these worked for more than a few minutes. I did restore firwmare from the computer but I have not tried putting the iPhone into DFU mode...is there a difference?
Any ideas appreciated.

All iPhones require a SIM for updating/activating.
The SIM does not need to be active, simply insert a SIM card and activate the device. Borrow a SIM from a friend if necessary.

Safari on iPhone 5S stops playback once screen goes dark

This is very annoying. Any time I try to play a track form a website the playback stops when I go to a different app or when screen goes dark or when I lock the screen. I have tried reseting all settings etc etc. Nothing seem to cure this. Is this a known bug? Anyone else has this problem? The same happens if I play an embeded track via Facebook, which basically launches safari and starts playback. Once the screen is dark the playback stops.

Hi
Try holding sleep/wake + power button for 10 seconds, until you see the Apple Logo.
See how that goes.
Taylor

Screen goes dark too quickly while on call

Hi- I am just learning to use my new iphone 4, already did software update. When i am on a call, the screen goes dark within a few seconds so that i cant easily get back to the keyboard, the screen that allows me to go on speakerphone etc. Is this normal? I adjusted the auto-lock in settings but i couldnt find any adjustment for the screen going to sleep while on the phone. Also, is there any way to adjust the number of rings before the call goes to voicemail? Thanks.

hey mehode,
correct me if im wrong..
laptop at maximum brightness or even if brightness level is set at half .. the backlight is off. ? And if you close the lid the backlight will suddenly switch on ?
curious to know as this had happen before you installed that BIOS 7FETC7WW 2.27-1.08 , when did it start to happen ? was any new software installed before it started to happen ?
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

MacBook Air Boots to OS, then screen goes dark.

I have recently been working on an older style (A1304) MacBook Air with the 128GB SSD. I've been working on Mac's for years, and have worked on hundreds, but this is the first time I've ever come across this particular issue.
Liquid damaged MacBook Air. Keyboard and Trackpad mainly took the brunt of the spill. Popped off the keys, cleaned it all up. Button for the trackpad no longer works, but everything else does. Entire computer was disassembled, no other liquid was found.
MacBook Air boots up normally, and I was using it for a few hours to make sure everything was working fine. Left it to charge. Came back two hours later, and the screen was dark (but the image was still visible, as if the backlight was not on). Could see the mouse pointer moving, but backlight won't come back on. Turned off computer, turned it back on. Backlight works just fine, and it boots to the OS. Within 10 seconds of booting to OS, the screen goes dark (screen goes completely black with no image). Couple seconds later, light on the front starts to "breathe" indicating it's sleeping. Wake it back up, and image appears on the screen, but no backlight. Then it "goes to sleep" again.
Boot computer to a Flash Drive with Snow Leopard Installer and once the blue screen comes on as if the installer is just about to pop up, it "goes to sleep" immediaetly. Though, the backlight and computer will stay on in the Apple Hardware Test for as long as I want. (ran it several times, "no trouble found". Also reset the PRAM, nothing helps.
I was wondering if anyone has ever come across this. Completely baffled on whether it's a software or hardware (or combination of the both) issue I'm having.

The keyboard and trackpad reside on top of the motherboard and all the components of the computer. The keyboard and trackpad are not liquid proof. It is VERY likely that the liquid made its way to the motherboard and has affected those components. If EVER there is liquid spilled on a computer, the last thing you want to do is A. Turn it on to make sure it is working.. and B. Plug it in and charge it. Do the EXACT opposite. Unplug and turn off all power, and, if possible, remove the battery from it. The liquid itself doesnt do the damage...the damage is done when the liquid comes in contact with the circuits and shorts out the contacts and components. You could try to connect to an external monitor, if you have the means to do so, to see if it makes a difference, but it probably will not. I seems that the motherboard is not functioning correctly.

When the screen goes dark my audible book stops

I am having trouble with my iphone 5.
When I listen to a book on Audble, it has stopped playing when the screen goes dark
This is with earphones and when on speaker phone...
Suggestions?

It only does this on Audible, not on my music

700P Sprint Update 1.10 - Screen goes dark after sync

I updated my Sprint 700P yesterday to V1.10 Palm software. All seemed to go well with the update, until I tried to restore my data with a HotSync.
The sync seems to go normally, but at the end, it says a "reset is necessary"...after the reset, the screen goes dark right after the Palm logo appears. The phone seems to be still working.....just no visible screen.
I spent hours on this yesterday....now have no working phone.....very frustrated.
Warren C.
Post relates to: Treo 700p (Sprint)

Yes
i just replaced my 700p due to this issue and return home to find that nothing has been resolved.
It turns out that the update is rather seriously flawed. There is no way to revert the update so, Verizon (after checking with Palm) replaced my Treo and suggested that I not run the update again.
Now the sync issue that you describe.
There appears to be files associated with your treo on the Palm software on your desktop that are set for installation. This was due to the update i believe. These files: specifically those associated with AudibleAir.pdb are creating havoc during the sync.
The Work-around that Palm suggested to me which appears to work (on the new phone with the original ROM) is as follows:
1) Hard Reset the Treo
2) Re-sync the treo
!> When it asks you to choose the correct id, DO NOT DO SO!!!
3) Create a new ID for the treo and continue the sync.
This way these bad files are no longer set for installation because you are not using the same account as when you ran the update utility.
I would be interested to know if this works with a Treo 700p with the new ROMs installed.
My method requires the old ROMS and Palm in its infinite wisdom has not created any means of rolling back to the old ones. Thus a catastrophic update.

Curve screen goes dark while navigating

While using Verizon Navigator, Curve 8330 screen goes dark unless I continue to hit the rollerball every few seconds. The security option allows for a 2-minute window but, at times, I will need hours of screen light. How do I correct this?

dl54
I'm sorry to hear you're having some problems with your device and the new software. Software updates are designed to enhance features and function overall, we don't want this to take away from it. Not to worry, we can help fix this. All you have to do is go to Settings>Display>Screen timeout>change to desired setting.
AdaS_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Computer screen goes dark (stops)after latest update.

After my latest update,computer crashes,screen goes dark,using wireless mouse;difficult to restart.
Is it 6.3 or the mouse?

First, Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
You could have some directory corruption. Let us know what errors Disk Utility reports and if DU was able to repair them. Disk Utility's Disk Repair is not perfect and may not find or repair all directory issues. A stronger utility may be required to finish the job.
After that Repair Permissions.
No need to report Permissions errors....we all get them.
Then, download the 10.6.3 Combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try.
You can install it right over what you already have.
DALE

Screen goes dark while typing password.

Since recent Samsung upgrade, screen goes dark so quickly that it's difficult to get the password entered in time to unlock phone. Any ideas?

dl54
I'm sorry to hear you're having some problems with your device and the new software. Software updates are designed to enhance features and function overall, we don't want this to take away from it. Not to worry, we can help fix this. All you have to do is go to Settings>Display>Screen timeout>change to desired setting.
AdaS_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

My i-phone screen goes dark really quickly

My i-phone screen goes dark really quickly. How do I change the setting?

Hey there Snow Falls,
It sounds like you would like to change the amount of time it takes for your phone to automatically lock. This function is located in your Settings on the phone:
Set the amount of time before iPhone locks
Choose General > Auto-Lock and choose a time.
From: iPhone: About General Settings
http://support.apple.com/kb/ta38641
Thank you for using Apple Support Communities.
All the very best,
Sterling

I have a "white screen " ,tried to hold the two buttons down and it still won't work.The screen goes dark, then comes back white.

I have a "white screen",tried to hold the two buttons down and it still won't work.The screen goes dark, then comes back white.

Morning Clementine Lin,
For more information this, please see this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Take a look at the Will not turn on, will not turn on unless connected to power, or unexpected power off section.
Have a nice day,
Mario

Iphone 4S i0S6 software, screen going dark

Similar Messages

Maybe you are looking for