IPhone 4s images show up as all black in iPhoto

I have tried downloading photos taken on the phone to my computer through the USB as well as enabled photostream to automatically download them but a number of my pictures show up as black boxes when in iPhoto. On the phone's camera roll they are there and viewable but blank black frames in iPhoto. I am not shooting with the HDR feature and some pictures do show up and others don't. I've deleted the photos from iPhoto and tried redownloading them a few times and nothing works , How can I resolve this?
Thanks,
W.

Select the library in iPhoto Library Manager and click the Options button on the right
Select "Read & Write" in the "Owner" pop-up menu and click the "Apply Permissions Now" button. This will make your library folder readable and writable. Then click "Done".
Note that if the library in question is owned by another user on the machine, you may not be able to successfully reset the permissions for the library. In that case, you'll need to log in as the user that owns the library and try again.
Open the library in iPhoto and see if it now can read your album data
If you have an iPhoto library that is corrupt and causing iPhoto to crash or otherwise be unusable, iPhoto Library Manager provides the ability to rebuild your library based on the information found in its AlbumData.xml file. Select the library you want to rebuild and choose the "Rebuild Library" command from the File menu. After choosing a location to store the rebuilt library, iPhoto Library Manager will proceed to try rebuilding the library as best as it can based on the available data.
There are some cases in which the data for the library is either damaged or incomplete that will cause a rebuild to fail.
hope it helps
angus cooney

Similar Messages

  • My iphone 3g is showing no service all of a sudden.. i am unable to make calls. please help...

    My iphone 3g is showing no service all of a sudden. i am unable to make calls. my iphone has turned out to a simple ipod. pls help. ...

    My iphone 3g is showing no service all of a sudden. i am unable to make calls. my iphone has turned out to a simple ipod. pls help. ...

  • Itunes showing up in all black

    when i open my itunes it comes up ALL BLACK!!!!
    i sign in and out but nothing works
    someone please help me
    thanks

    Go to Add/Remove progams, select QuickTime and select Repair.

  • I keep getting an error message when I plug my iPhone into my computer.  It says, "This iPhone cannot be used because the Apple Mobile Device has not been started." This has never happened before when I plugged it in - now the iPhone won't show up at all.

    Someone please help!  I do not know how to fix this.  It keeps saying my Mobile Device has not been started and I can't get my phone to show up in the iTunes window AT ALL. It will charge while plugged in, but it just won't come up in iTunes.

    Sorry, the error message should read, "...the Apple Mobile Device service has not been started."

  • Hi, having trouble playing mov files taken by a Fuji camera, image shows up but all in green and no playback any help welcome.

    H can anybody help with the above problem?

    When you have kernel panics, the pertinent information is in the panic report.
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.

  • My iPhone crashed .. And went all black and won't turn on . (My home button is not working)

    Please help

    Nothing we can do, especially if your home button is not working.  You'll need to bring your phone into Apple for evaluation

  • Why does the iPhone 3GS not show as a camera model in iPhoto

    I noticed on the extended photo info in iPhoto, the new iPhone 3GS doesnt have a camera model for photos taken with the iPhone 3GS.

    No it does NOT. Pictures taken with my old iPhone do, but not the new 3GS.

  • IPhote don't show pictures after upload from iPhone, they turned all black

    After uploaden all the pictures from my iPhone to my Mac the pictures turned all black in iPhoto.

    There are 9 different versions of iPhoto and they run on seven different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. What were you doing when the problem arose?
    - Did it ever work properly?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    Anything else you can think of that might allow someone else to understand your issue.

  • Placing an image in a tabbed panel content area, it shows up on all three panels

    This is crazy.  It should be so simple. But sometimes this happens to me. Like today.
    I have many pages that use a simple tabbed panel feature with three tabs.
    Each content area has a text frame and an image frame.
    Sometimes when I try to place an image into the content area of the first tab, the image shows up on all three content areas.  I have tried and tried placing the image, making very sure I am in the "content area" on not just on the page.  But nevertheless, the image seems to be "stuck" on the page, in front of the accordian feature, and therefore showing on all three tabs.
    How am I not targeting the placement of those images correctly? There just aren't that many options for me to screw up, it's a simple tabbed panel, that's all!
    Help please.
    Barbara

    Are you using the latest version of Muse/Air?
    The borders of the Content Area of a tab gets highlighted as soon as you drag over an element over it so it is very unlikely that something like this could happen. However, I believe it could be due to messed up Layers configuration as the only way I could reproduce this problem is through moving the image into a layer above a layer that contains the Tabbed panel or in case of just one layer, you might have the image at the very top.
    Thanks,
    Vinayak

  • Motion files exporting to all-black .Mov file...

    I took a layered .PSD  and animated the layers using standard keyframes over a stationary white background layer. I have done many projects like this, and for some reason this one will not export. Keeps showing up as all black... and when i try to play through it, it will not play at the normal speed but plays
    1 frame = 1 second...   Any thoughts on what the setting could be that i messed up?

    These .f4v options are both in fact videos, which you can use in video player / editors directly.
    If you want to convert this video to MP4, you can do it with Adobe Media Encoder which is installed free with Captivate 5. Inside the Adobe Media Encoder, you need to select H.264 as the format. The select one of the suitable preset to get MP4 output.
    -Sony

  • My Iphone 4 will not turn on all it will do is show the iTunes logo and and arrow point to it with an image of the connector to power cord. Ive tried to turn it off, taken out sim but nothing

    My Iphone 4 will not turn on all it will do is show the iTunes logo and and arrow point to it with an image of the connector to power cord. Ive tried to turn it off, taken out sim but nothing

    Hello there, FrancesCech.
    The following iPhone Troubleshooting Assistant should help with what to do with your situation:
    Apple - Support - iPhone - Restore Troubleshooting Assistant
    http://www.apple.com/support/iphone/assistant/restore/
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • My iphone has a problem, it simply does not work, the screen is all black with a few colorful scribbles and images blend, I used it only took 6 days and returned to service when operated only 7 more days and it happened again the same thing, what do I do?

    My iphone has a problem, it simply does not work, the screen is all black with a few colorful scribbles and images blend, I used it only took 6 days and returned to service when operated only 7 more days and it happened again the same thing, what do I do?

    Reset the PRAM
    Reinstall the operating system from the dvd (you will not loose your data)

  • I've a brookstone projector for iPhone 4. But this isn't working on my iPhone 4s running ios 7. It's working with the videos but the projected image shows a lot of white and black pixels. The image projected is soo noisy. What should I do ?

    What should I do ? The image projected is full of black n white grains/pixels

    To delete, tap "Edit" (tap to enlarge image)

  • The default wallpapers are not showing up. All I see is a black screen. How do I get back default wallpapers?

    Hello,
    I have a problem with my iPhone. The default wallpapers are not showing up. All I see is a black screen. Can someone tell me what has to be done?

    Go to the Home screen with one press of the home button. Then double press the Home button. When the Dock raises, tap and hold one of the app icons untill they all start jiggling and a red X appears. Tap the red X on the video app to quit the app.

  • Audio but NO images show - black screen -up in the canvas viewer window????

    Hi all,
    I'm a newbie having problems with a file in FCP where the audio plays and but no image shows up in the Canvas window. I imported the audio from my camera and had some kind of a problem in the browser window where the sequence didn't show up with the actual length of time...it read 00:00:00. I reimported the quicktime file into FCP Express, and then it showed up fine. When I reopened it in FC Pro, this time, the sequence shows the full amount of time of the file, but I'm still getting all black in the canvas window. I'm at a loss to explain this. I have a feeling I did something wrong during the initial import, and so the actual source file is somehow corrupted. But when I open the source file in quicktime, it plays fine. It's only within FCP that it's all dark.
    Help!!!!!
    Thanks in advance
    Message was edited by: Gary King3

    sounds like you do not have a source file that FCP recognizes.
    What camera and what codec does it shoot? did you convert to a prores or standard QT format before or after ingesting?
    bogiesan

Maybe you are looking for

  • Time delay between 2 waveforms

    Hi, Please bear with me while I explain what I'm trying to do :-)   Basically, in the attached LabView file ("flow vis + trigger-m.vi"), I am generating 2 signals: a sinusoidal waveform (used to drive an actuator) and a square waveform (used as a TTL

  • How to add the property file..ie(default.properties) to a webdynpro project

    Hi All, How to add the property file..ie(default.properties) to a webdynpro project. I urgently require the solution. Kindly get it for me. Regards DK

  • File-IDOC scenario in ALE

    Hi,     I want to upload vendor master from a FTP file location to SAP using ALE IDOCs. We don't have XI middleware in our system.  Could anybody suggest how to do it in detail? I want to upload data from the file in FTP when a master file is placed

  • Having problem implementin javabeans in JSP

    here is my code: <html> <body> <%@ page language="java" import="dbBean"\%> <jsp:useBean id="dbBean" scope="request" class="dbBean" /> <% dbBean.setUserID(request.getParameter("id")); dbBean.setUserPass(request.getParameter("pass")); dbBean.setFirstNa

  • Milestone billing to one delivery

    Hello, I've got following problem. To an SD-order position there is only one delivery, which should be billed within more invoices. These values should come into the COPA through the invoice - recort type F. So with the first invoice, also the costs