IPhone 4s issues after upgrading to IOS 8

Have few issues after upgrading to iOS 8
- Phone hangs every few hours, reboots automatically
- Bluetooth does not work properly (call does not get disconnected or even if disconnected on phone, the car bluetooth shows call is on)
- Searching for contacts is a problem
- Apps hang (especially facebook)
Any way to go back to iOS 7 ?
Any other tips / tricks appreciated..
Venkat

No way to come back to iOS 7 ...
But did you tried to reset all settings (general -> reset -> all settings) ?
For me iOS 8 was a mess on a 5S, especially car Bluetooth, and all works now fine after resetting the settings (all settings, not only network settings).

Similar Messages

  • I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. Please help, restoring setting even didn't helped.

    I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.

    Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
    1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
    2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
    3. Do a soft and hard reset.
    4. Reset network settings.
    5. Back your data up, erase all content from settings menu, restore from backup.
    6. Reinstall your software( put it in recovery mode).
    I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :)

  • Hello I am using iPhone 5s but after upgrading to iOS 8.0.1 I am unable to signin my iCloud account ?

    Hello
    i am using iPhone 5s, but after upgrading to iOS 8.0.1 I am unable to sigin my iCloud account
    whenever i try to signin it shows " verification failed" / " the password you entered in incorrect"
    i changed by Apple ID PASSWORD three times and tried to signin but it shows same as above - verification failed / password is incorrect
    please suggest
    regards
    karan deep singh

    I believe that all iPhones, purchased in Egypt, from official sources, are sold as carrier locked. So, your phone was hacked by someone so you could use it in Germany. Sorry, but that's what happens to hacked iPhones.
    No one here can help you, nor can/will Apple, and since none of the carriers in Egypt offer official unlocking, your choices are not good.

  • I have an iPhone 4s.  After upgrading to iOS 6 (and 6.0.1) my sound occasionally just stops working and I have to power off/on to get it back working again.  Anyone else having this issue?

    My sounds occasionally stops working after upgrading to iOS 6.  Is anyone else having sound issues with iOS 6 or greater?

    I am having this same issue on my iPhone 4. The most recent update to iOS 6.1 didn't fix it either. Has anyone found a fix for this problem? It doesn't happen often, maybe every third day or so but requires power off, power on to bring the sound back. 

  • WIFI intermittent connectivity issues after upgrading to iOS 8.0.2

    Hi,
    WIFI seems to be dropping a lot after upgrading to iOS 8.0.2. I even took the iPad back to Apple and they replaced it with a new one with iOS7, which was working fine, then the same problem resurfaced after upgrading to iOS 8.0.2. I can't use my iPad in the evening at all.
    My iPhone is fine after the upgrade though.
    Clearly an iOS8 software issuse on iPads?
    Thanks

    Similar thing happened to me..  Seems like the bug has not been solved.. I managed to restore to iOS 8 and this resolved the issue, at least for the time-being!
         Apple team, my sincere request to you:Please attend this bug asap. It really dissolves the purpose  of an iPhone..
    Keeping my fingres crossed till then!

  • Freeze/Battery issues after upgrade to iOS 8.0.2

    Since upgrading my 3rd Gen iPad WiFi to iOS 8.0.2 I have been experiencing freezes where nothing works. I can't open apps or do anything. If I hold the on/off button down eventually it comes back to life.  Second issue is battery life.  Last night I closed my smart cover and made sure the display was off.  Battery at the time was 62%. This morning I opened the iPad smart cover and the battery was down too 23%.  This has happened a number of time over the past week or so. I have Blue Tooth and Location Services off.
    Both of these issues are new after upgrading to iOS 8.0.2.  No problems whatsoever prior to that.
    Not sure if I'm putting this in the correct category or not.
    Is there a way to wipe the iPad clean and reinstall everything from scratch or is my iPad just shot?  Thanks in advance.

    Same sort of issues here on my ipad3. iOS 8 turned it from a nice slick device into a jerky, laggy pain. Tried all the reset options and it's still pretty crap.
    NIce one apple, I'm changing to a galaxy tab after you broke my iPad!

  • Sync issues after upgrading to ios 7

    After upgrading to iOS 7 on my iPad 3 with no problem at all, I lost all my music. When I try and sync with iTunes 11.1 (on Windows 7) it hangs on the last step "waiting to apply changes", and the little sync icon on the iPad disappears. I can't even add or remove apps. Any solutions out there?
    Thanks in advance.

    Try a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below. 
    http://www.apple.com/contact/

  • Cisco 7200 VSA issue after upgrade to IOS 15.2

    After upgrade to IOS 15.2(4), VSA module in 7206VXR (NPE-G2) is disabled and we cannot enable it.
    Show diag output:
    ------------------ show diag ------------------
    Slot 0:
    VSA IPsec Card Port adapter
    Port adapter is deactivated
    Port adapter insertion time unknown
    EEPROM contents at hardware discovery:
    PCB Serial Number        : JAF1309ADDT
    Hardware Revision        : 1.0
    Part Number              : 73-10220-05
    Board Revision           : B1
    RMA Test History         : 00
    RMA Number               : 0-0-0-0
    RMA History              : 00
    Deviation Number         : 0
    Product (FRU) Number     : C7200-VSA          
    Version Identifier       : V01
    Top Assy. Part Number    : 68-2578-05
    CLEI Code                : CNUCAFNAAA
    EEPROM format version 4
    EEPROM contents (hex):
      0x00: 04 FF C1 8B 4A 41 46 31 33 30 39 41 44 44 54 40
      0x10: 05 0D 41 01 00 82 49 27 EC 05 42 42 31 03 00 81
      0x20: 00 00 00 00 04 00 88 00 00 00 00 CB 94 43 37 32
      0x30: 30 30 2D 56 53 41 20 20 20 20 20 20 20 20 20 20
      0x40: 20 89 56 30 31 20 D9 03 C1 40 CB 87 44 0A 12 05
      0x50: C6 8A 43 4E 55 43 41 46 4E 41 41 41 FF FF FF FF
      0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    If we try to enable it manually from CLI we get the following message:
    Router(config)#crypto engine slot 0
    VSA will NOT come up until system power-cycle or reload
    Of course, after reload nothing happens.
    Is VSA incompatible with IOS 15.x? I'm asking because downgrade to 12.4 causes VSA to be active again.
    Regards,
    Igor

    Hi igor,
    1) FDP image
    Field-programmable devices (FPDs) are hardware devices implemented on router cards that support separate software upgrades. An FPD image package is used to upgrade FPD images
    The FPD image package must be compatible with the Cisco IOS software that is running on the router. If an incompatibility exists between an FPD image package and the Cisco IOS software release running the router, the device with the FPD will not operate properly until the incompatibility is resolved.
    The FPD automatic upgrade feature searches only for the FPD image package file that is the same version number as the Cisco IOS release being used by the system. For example, if the Cisco IOS release being used is Cisco IOS Release 12.4(5)T1, the system searches for the FPD image package file that supports the specific Cisco IOS release (c7200-fpd-pkg.124-5.T1.pkg).
    2) Steps to Upgrade:
    From the document below which I already sent you, please refer to the section “How to Upgrade Field-Programmable Devices”
    http://www.cisco.com/en/US/docs/routers/7200/configuration/feature_guides/fpd.html
    I would recommend you to follow the steps in the “Field-Programmable Device Quick Upgrade (Automatic FPD Upgrade Only)” as that is the recommended and the easiest way.
    Steps are:
    The command is present “upgrade fpd auto” in the running-config by default.
    Have the Cisco IOS image in disk2:
    Download the FPD image package to disk2: flash disk
    Reboot the router using the new Cisco IOS release.
    Hope this helps
    Thanks
    Syed

  • Yahoo mail sync issue after upgrade to iOS 5

    After i have upgraded to iOS 5 my emails from Yahoo are a month off.
    Only the emails from a month before are synchronized. As an example, today 10/24 I can see the emails from until 9/13.
    Any ideas on how to fix this?

    Ok, thanks everyone's experience sharing with each other. after I try so many time with my bro for this issue, finally we got solution to solve this issue.
    I'm using iPhone 4 and my bro is using iPod touch 4th Generation, we both upgrade to iOS 5,
    then I was thinking that when I do Facetime setting, there is a selection that you can use your Apple ID as your Facetime account, so I changed my Facetime account with Apple ID, the default setting is using your phone number. then its works!!  now I can use Facetime with my bro in airplane mode.
    I guess before I upgrade iOS 5, iOS 4 allow Facetime auto detect to use phone number(if airplane mode is off) or use Apple ID, which your email address to connect to another user, but iOS 5 not allow it or disable auto detect, (I just guess). 
    anyway now I only use Apple ID as my Facetime account, then I can use Facetime under airplane mode. hope it help you guys.

  • Ipad 2 and Iphone 4 hybernates after upgrade to IOS 6

    Hi , After upgrading my iphone 4 and Ipad 2 to IOS 6 , both devices go in "hibernate" mode after being idle for a while. The only way to open them is by hard rebooting. Have you expirienced similar problems ? Is there any solution to fix it ? BR Robert

    Andrew is partially right.  With apps that are still running, they are running regardless of being suspended or not.  A restore should be her last option. as she will lose anything added since her last back up.  And there should be NO reduction in speed as the update was made compatible with all phones included in the update. 
    I recommend the following.
    1st, delete all apps on the phone that are not being used.  They take memory and speed since almost all apps run in the background checking for notifications.
    2nd, go disable all notifications you don't need.  This will help with speed AND battery life.
    3rd, location services....  Go adjust this... if you don't NEED it on, turn it off.  It will reduce usage on the phone, and again save ALOT of battery life.
    4th, organize apps into folders.  this will ruduce "pages" on the phone, and increase speed.
    5th, clear browsing history. 
    6th, delete emails, texts, contacts that are not needed.  ESPECIALLY Spam folders!!  some of us never clear spam, and there could be a large amount.
    7th,  Do a hard restart.  While the phone is powered on, hold the home button and power button down at the same time.  Keep holding while the phone suts down and keep them held down until the Apple logo reappears. 
    If this does not help, then she needs to take a record of all contacts shes added since her last back-up, email all photos taken since her last back up, so she can save them back to the phone,(DO NOT rely on photostream, because once the restore is done, those photos will be taken from the stream.)  She will need to do the restore off her computer and the update through iTunes.

  • IPhone 4s activation after upgrading to IOS 8.1.2

    I am being asked to activate my iPhone 4s again. I upgraded to IOS 8.1.2 several weeks ago from 7.x. The upgrade went smoothly and activation went smoothly. Now almost two weeks later the phone is asking me to activate my iPhone again . I am the original owner of the iPhone.
    I can receive calls on the phone and it shows full signal from my carrier (AT&T). However, I cannot log onto the phone until I go through the activation process. I get the message "Could not Activate iPhone".  I will try a restore later tonight and failing that take it to an AT&T store to check out the SIM card.
    My question is this: Has anyone encountered the same problem? What was the solution (other than buying a new phone)?

    Hi Restore  Back to Factory  Settings over your WiFi Go to Settings iCloud check last backup. Since ios 7 when you put your iPhone or charge it  Automatically backs up to iCloud After Restore just use same Apple ID  Then you will get your Apps & data back. Cheers Brian

  • I'm using iphone 4s and after upgrading to ios 6, my facebook app seems to have lsot the 'share' button altogether, which means i cant share anything on my news feed. I cant change my profile or cover pic on fb which i could before the upgrade. Help Pls

    I'm using an iphone 4S with IOS 6. Before the upgrade I was able to share thigns from my news feed on facebook and change pictures (profile, cover) from my phone. After upgrading I cannot share or change pictures or articles. I've tried resetting my phone, deleting and re-installing fb app, but no success. Would appreciate any help, suggestions...Cheers

    I've never been able to share FaceBook posts nor seen the option using the iOS FaceBook app regardless the FaceBook app and iOS version. I can Like and I can Comment, and if I select a link or video to view under iOS 6, I can use the Share option for the link or video, but not for a post.

  • Iphone 4 overheats after upgrading to ios 5.1

    I have an iphone 4 and made un upgrade to ios 5.1 yesterday, and so far that was a big mistake. My phone started to overheat terribly - when I am using or charging it, and also the battery drains way too fast and it takes ages to charge it. I have tried restoring and hard reset, but nothing changes. I have searched the forum, but most people are having problems with battery drain, not the overheating.. I don't know what could be the cause of that and what do I do to get my normal phone back! Please help

    And now me too.
    I updated to IOS 5.1 today.
    Under normal conditions, with the phone under no load, or stress, and away from sunlight indoors, my iPhone 4 is giving the "Temperature" warning. It has NEVER done this before, its been completely issue free.
    IOS 5.1 is CLEARLY to blame Apple...... Good to see a response from the company that have done this to our phones lol.
    Want some answers and a solution please Apple!
    PS: The phone had actually gotten so hot I couldn't touch it at all, as it burnt my fingers. This happened in my house with windows open, plenty of breeze blowing through the room......  It has NEVER done anything like this before, until 5.1 was installed. Within 25 minutes of the update this happened....

  • IPhone 5 Freezes after upgrading to IOS 8

    I have been experiencing performance issues on my iPhone 5 since upgrading to IOS 5. I searched the internet and performed all the recovery suggestions offered by other users. The problem seems to persist regardless of various reboots, restores and other recovery methods used. I am positive that the issue is not caused by a hardware defect and is directly linked to the new software.
    As a loyal Apple User, I want to know what is being done to resolve this issue? When can we expect a new software release to fix the performance degradation as a result of the IOS 8 build? This is completely unacceptable, we need a prompt response from Apple on the matter, there are tons of people with the same issue and I feel that not enough is being done to address it.

    I have no issues.  There is no Apple in this user to user technical forum.
    Why not schedule an appointment with the genius bar and take your phone to Apple if you want to speak to someone from Apple.

  • I have an iPhone 5 and after upgrading to iOS 7 my chase and PayPal apps won't work.

    Ever since I did the upgrade I haven't been able to log in to chase and paypal. I have remove them and add them again but still can't log in. I try log in thru my wife's iPhone and I'm able to log in.  Please help!!! N

    Is your wife's iPhone using the same version of iOS?
    Sounds to me like it is more an issue with the app than something to do with iOS. Have you contacted the developers (via app support page)?

Maybe you are looking for

  • Possible bug in GDM with new user

    Hi, I created a user in the system settings app in gnome and I set the password to be set at first login, but now logging out of the current user and trying to login to the new user without the password on gdm I just get nothing where 'create new UNI

  • Old photos don't load on new iphone, but do display as gray squares

    I'm trying to help my mom with a new iphone she got.  A couple of months ago my mom bout a new iphone at a sprint store and had the store guy sync all her data from her old iphone.  The photos didn't seem to transfer properly though.  When you pull u

  • Cutover strategy for Cash Management

    Hi Gurus, Please tell me about the cutover strategy for Cash Management?? We are implementing Cash Management in mid year, so how can we take the data in effect which is already posted in the system?? Please revert asap. Thank You

  • Opening .docx files

    Does anyone know how to open .docx files? I am running 10.4.11 and use Microsoft Office for Mac for word processing. Generally it is no problem for me to use Word to open .doc files that are emailed to me, but I can't seem to open .docx files. I've t

  • Parameter dialog

    im working on a vb.net app in VS.net2005 with crystal reports XI. i would like to disable the parameter dialog if at all possible? if not i would like to be able to get the parameter dynamic values added in the report to show in the dialog..?