Iphone 4s only shows white apple
1 I reset my apple 4s to original factory settings.
2 I connected it to my itunes and updated the iphone for over 1 hour.
3 Now, it is still the same I cannot start the Iphone.
Glowing white apple and black background.
Please help me....
Thx
Hey RaniavS,
I'm sorry to hear you are having an issue with your iPhone showing only a white apple on the screen after resetting it. No doubt a frustrating experience.
The following article offers some help for your situation -
Apple logo with progress bar after updating or restoring iPhone, iPad, or iPod touch from backup - Apple Support
You seem to have done everything up to the last step so start with the section titled Get Help.
Thanks for using Apple Support Communities.
Be well,
Brett L
Similar Messages
-
My iphone screen only show the apple logo only
when i updated my iphone, suddently my usb no work now stop already. then it only show on my monitoe is the apple logo only.
cannot restart, cannot do anything. Please help me solve the problem. i scared.Did you try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again?
If this does not work, try to connect in recovery mode and restore again, explained in this article:
iOS: Unable to update or restore -
Why is my iPhone 4 only showing the apple logo?
I was using my phone to surf the web and next thing I know it shuts off. Now all it does is show me the apple logo which fades after about 40 seconds and than reappears. I've tried to reset it, turn it off, and hook it up to iTunes but absolutely nothing works. It just keeps fading in and out of the apple logo. It's not jailbroken or anything.
I would remove a song that has the button and reload it to see if it plays then. The songs may have gotten corrupted in the loading process.
-
My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?
I'm afraid you'll have to get the phone serviced, dropping the phone must have damaged additional parts inside the phone.
But Apple will not service the phone anymore, opening the phone and replacing the battery should only be done by authorized personal, not by users.
You'll have to look for a 3rd party repair shop and see if they can fix this, sorry. -
Tried to open an app and my iPad gen one froze. It only shows the apple on black screen and will show the operating wheel sometimes and while plugged in it will beep every few minutes. Will not load one show anything on screen but the small white apple.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my iphone no longer shows up on my computer, the iphone screen has gone blank only showing the Apple logo. I am unable to make and receive calls. Can someone help me with this problem please?
Your iphone is shown at the top of the page.
You can also simply click View>Show Sidebar and it will look about the same as it did before. -
can't locate the serial number the phone only shows the apple icon I charged it. I will only show the apple icon?
If you decide that you want to Restore the iPhone Firmware then. Open iTunes on computer, connect iPhone to computer with USB cable. Hold both home and power buttons for exactly 10 seconds, then release the Power button, keep holding the Home button for about another 20 seconds, until iTunes recognizes the iPhone in Recovery Mode. If the iPhone screen is black this is good. Restore the iPhone Firmware. If you get Recovery Mode but the iPhone shows the iTunes screen you can try to Restore, but if it fails, do the instructions again until you get Recovery Mode with black iPhone screen.
-
Hi, I can't restore my iphone 4. When he's about to finish the restoration, it stops. Don't let me turn on the iphone, and only show me the apple icon, or a "load itunes" icon. Someone can help me please? Thank you!
We are users like you and won't be able to extend your warranty. You will need to physically return the device to the USA for warranty service as you probably already know. Here is an article that deals with error #2001: Resolve iOS update and restore errors
-
after i upgrade to ios 7.0.4 my iphone didn't work, only show a apple logo then dissapare again, and it happed almost a hour.
Try a reset by pressing and holding the home and power buttons for 15-20 seconds.
If it still does not boot up properly, put the device in DFU mode (google it) and restore. -
What do i do if my iphone only shows the apple logo?
It only shows the apple logo noe and then. Help please
Restore it. This link will help: If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
-
Hi all,
i was upgrading my iphone to ios6.1.2; the upgrading had been completed and starting to install but suddenly the wi fi connection lost and the installation couldn't be completed. Now my phone is dead....it only shows the apple logo....can't do anything..help me out..Press the button at the top right and the home button together for 30 seconds, when you see the apple logo, let them go.
if you see a picture of the itunes symbol and a whitye usb chord then connect the device to a computer and perform a restore. -
Can anyone help me how to make my iphone 4 work I turned it off and now I turned it back on and it does not work it only shows the APPLE icon on the screen it has being like that for past 9 hours.... HELP PLEASE
Connect iPhone to Wall Charger and Reset, hold both Home and Power buttons until the iPhone begins to restart itself. Usually takes less than 15 seconds of holding both buttons.
If you decide your iPhone is not working properly, and you decide to Restore your iPhone Firmware then do this. Open iTunes on computer, then connect iPhone to computer, then hold both Home and Power buttons until iTunes recognizes iPhone in Recovery Mode. This usually takes about 20 seconds of holding both buttons. Restore the iPhone Firmware. -
my iphone 3g is not turn on after reboot only show me apple logo and then trun of auto . now its not get charging with my comp or adaptor. plz help me
I had the same problem i had to take to a shop to get a new battery so i did and now it is good so i suggest get a new battery hope this helped
-
I was looking through my pictures and when i tapped to see a specific one my ipod blacked out. Now the screen only shows the apple icon and I cant go anywhere. I tried preshing the on/off and home button but it won't work. I even pressed both at the same time for 10 seconds and still nothing... I connected it to my lap top and went to my itunes account but it tells me that the device that i just plugged in has an error. I already tried plugging it back in several times and it still won't work. I don't know what else to do. I havn't had it for a whole year yet so its still insured to the apple company right? at least thats what I heard
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I don't know what to do. It is only showing the apple icon. I've tried turning it on and off and it just stays on the icon. It also wont connect to my computer so I can;t restore it like I have been told to do. So should I take it into an apple store? Or is it a lost cause..??
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Soap Adapter not Picking up files from sender
Hello All, I have configured a SOAP Adapter and started it. When i place a file in the appropriate directory, it is not getting picked up. Are there any reasons this could happen ? I would really appreaciate it if someone can help me with this !!! Be
-
SAP ABAP/BOBJ Infoview initial password change
Hi all, We are using BOBJ Crystal Repors and BI for reporting. All authentication and data security is working great including user/role sync from ABAP stack. My problem is as follows - Say I reset the initial password in the ABAP side for a user id.
-
How to add prefix to standard PO sequence.
Hi all, Requirement is how to add prefix to Purchase order number auto generated sequence.
-
Dear Experts, I have created service tax ledgers as per different business place in same company code. Also this ledgers have been configured in the table J_1IT030k_V in SM30. When I check OB40 it shows me only one ledger for the same tax code. When
-
Two POAs on same server?
I need to segment some users away from our main POA. Can I run two post office agents on the same server? SLES11/OES11, GroupWise 2012 One server is currently running 1 each of MTA, POA, GWIA and WEBACC. We have about 130 email accounts total. We wan