Iphone 4s problems after 5.1.1 upgrade

Hi all,
I know this has been posted many previous times however having read through most of those I am confused as to what to do next...
I recently updated my Iphone 4s with the 5.1.1 OS. For the next few days following this the phone displayed 'invalid sim' pop up. I found that if i turned the phone off and on again I could resume normal service. However the message appeared more and more often until one time when I turned it back on it just displayed 'no service' and it has stayed like this now for 5 days. I have tried switching airplane mode on and off, 3g on and off, it still says 'no service' and occasionally 'searching'. There is no option under settings for 'carrier' and when I go to settings>phone it says my number is unknown.
I am with orange. Any advise on what to do or try, is this an orange problem or an apple one? Unfortunately I am a fair treck away from any Apple store or I would have gone there straight away.

Hi alls i can suggest is pop along to genius bar and show them hopefully they will either fix or replace for you.  Other than that just restore iphone
HTH

Similar Messages

  • Iphone 4 problems after 7.0.2 update--Especially with keyboard entries

    I am having serious iphone 4 problems after installing the 7.0.2 update.  Mostly it is with use of the keyboard.  Each key stroke takes about 8 seconds to show. It is truly disabling.  Apparently many others have had various problems.  The one thing the Apple Tech would tell me was that 7.0.2 cannot be uninstalled.  I have restarted & reset. Settings shows I have more that 20 free GB of space, though I don't know if that's important.
    Sure would appreciate help!  Thank you!

    settings - general - reset - reset network settings.
    also turn off automatic app updated...

  • Sound problems after iOS 4.2 upgrade

    Experiencing very poor sound quality after iOS 4.2 upgrade. Bad eq, left channel dropping out, sounds like heavy reverb. Exists with iPod and pandora apps. Tried adjusting eq in settings. Any one else having problems?

    Yep I just upgraded to new OS 4.2 on iPhone 4 and I get this static buzz sound when talking to people it's really annoying and sound quality is terrible. What happened? I went back to the shop and they said it's the upgrade and that there is an issue with it. They also said there is no point leaving the phone with them as they can't fix it that it's upto apple to release a patch for the problem. Can we get a fix for this soon before I damage my ears?

  • Dictation problems after ios 8.2 upgrade

    I rely heavily upon dictation.   2 problems occur (at minimum) after ios 8.2 upgrade to iphone 6. .
    1. I wasnt going to add this dictation bug (feature ;-)) b/c couldnt reproduce the seemingly safari bug when got home, but as I was dictating my first sentence for defect here, it happens in this text box on any line. :-(.
        1. Problem is as soon as dictation types in word Or words, when I hit done, it erases what was just dictated!  Happens on even just ine word. (So having to manually type all of this n I stink at typing ie, time consuming).
        2. I can paste characters from noteoad into here...so must be dictation relateD...it seems.
    2.  In the calendar textbox, when I dictate a new event (doesnt happen in location textbox) and the last character before it fills up the end of textbox (just before the "x"), it automatically does "done" for me (the beep sounds), it stops dictating, but more annoying is it will no longer allow me to continue dictating in that new event's top textbox.  That means I HAVE to type n I stink at that. To reproduce I simply:
    1. press the microphone.
      2. Type in only numerics 1 thru 17....it will dictate to look like this:  123 456-789-1011 1213 1415 1617
      3. "Beep/dong" noise because it hits the end of characters alowed it seems n decides it is "Done".
      4.  press the microphone
       5. "Beep/dong" noise because it wont let you dictate any more of anything said.
    I Couldnt find the entry where google shows someone with what looks like same issue/bug/defect/feature # 2, so entering this.
    I Have warranty but cant figure out how to get phone support for iphone (only mac ...last year).
    I don't seem to have this problem using i notepad in phone when he gets to having to wrap. :-)
    I Have not trieddictation on my mac...yet.
    CAn someone help on these issues please? Thanks!

    Hey Markwoody,
    Wow! That definitely sounds frustrating, but good job so far isolating and troubleshooting the issue. We have a few more steps that we can try in an attempt to resolve this issue:
    First, it sounds like you have tried restarting your phone. Let’s try a reset instead:
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    https://support.apple.com/en-us/ht201559
    How to reset
    - You should reset your device as a last resort and only if you can't restart it.
    - To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    If the issue persists, we’ll want to restore your device to factory settings and test once more. You can backup your device, but be sure to restore it as new first for isolation purposes, as restoring a backup can sometimes restore the same issues that you were experiencing before.
    Use iTunes to restore your iOS device to factory settings - Apple Support
    http://support.apple.com/en-us/HT201252
    Thanks,
    Matt M.

  • Timeouts and connection problems after 5.1(2) upgrade

    AIM/chat and some other programs are having timeout/connection problems after upgrade to 5.1(2). I am using S241 also. The connection problems stopped when the IPS was set to bypass. Rebuilt IPS and left sigs at default settings and problem is still happening. I am not seeing any of the IPs that are having the problem in the Event Viewer or on the Events in the IDM.
    Any known issues with the 5.1(2) that would cause this type of problem?

    I don't know specifically, but I did notice that 5.1(3) was released today.

  • Problems After Win 8.1 Upgrade - Two Additional Partitions Both With Same Volume Serial Number?

    An update from Win 8 Pro to Win 8.1 Pro has occurred automatically on one of my machines.
    Prior to the upgrade (from memory) the machine had an OEM Partition (40MB), EFI System Partition (500MB), Recovery Partition (8.17GB) and OS (C:) partition. Only the latter was visible in Computer.
    After the 8.1 upgrade there are two additional partitions, Recovery (500MB) and Recovery (450MB). All the partitions are now displayed in This PC as drives except the 40MB OEM Partition.
    When viewed in This PC both the two new drives (that appear to equate to the new partitions) show as 499MB each with the same amount of free space. In Disk Management the first new partition is shown as 500MB and the second as 450MB.
    I have SugarSync installed on this machine and since the upgrade it is displaying an error telling me it won't work because the two new drives have the same Volume Serial Numbers.
    Clearly something has gone wrong with the upgrade:
    Is there any way to resolve the Volume Serial Number conflict? 
    Is there any way to stop all these drives appearing in This PC?
    Do I need the two new partitions and if not how can I get rid of them?

    There is a fourth path to upgrading to Windows 8.1 provided by Microsoft. Microsoft have been displaying automated reminders from time to time on Windows 8 computers that Windows 8.1 update is available to download - from these reminders it is possible to
    choose either Install or Not Now.  Just recently these reminders have changed, they are instead notifying the user that the Windows 8.1 Update will be installed automatically or the user has options to postpone the installation for 1hr, 2hrs, etc. The
    user of this computer tells me she went away from the machine and Windows 8.1 update installed automatically from one of these prompts.
    I have seen these installation prompts on several of my customer's computers and they are not malware related (I deal with malware removal every day and would recognise this). However, I have scanned this computer with Bit Defender and MalwareBytes and there
    are no infections present.
    The only difference between this Windows 8.1 Update and the others that I have carried out is that it wasn't controlled and therefore I wasn't able to disable the security software (Bit Defender Internet Security 2015). This may be the cause of the problem.
    I've uploaded the two screenshots you asked for - the two new drives are W: and Z: and SugarSync is reporting that they have the same Volume Serial Numbers. Note: X: and Y: were not visible prior to the upgrade.
    There are two Windows Update logs at C:\Windows\ so I will upload both.

  • I have an iPhone 4 and after the 6.0 upgrade I don't have the 3D option in the map app and I don't have the panarama option on my camera.

    I have an iPhone 4 and after the iso 6.0 upgrade I don't have the 3D option in the map app and I don't have the panarama option on my camera. Some features are there but some are.

    Those features aren't supported on the iPhone 4.  Take a look here http://techcrunch.com/2012/09/19/ios-6-is-now-available-heres-what-features-your -idevice-gets/

  • HT5037 problems after using iPhoto library upgrader

    i can't open iPhoto library after using iPhoto library upgrader for a disk with a few pictures from an old iPhoto library on it. please help

    did you execture the library upgrader (in the APplications folder ==> utilities double click on it)? What exact problem are you haveing?
    LN

  • Safari problems after 10.10.3 upgrade

    I am unable to search anything in Safari after 10.10.3 upgrade.

    1. Power off the router. Unplug it from the wall. Wait a while.
        Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
        Restart the computer.
        Start up in Safe Mode.
        http://support.apple.com/kb/PH14204
    2. Safari > Preferences > Extensions
        Turn off Extensions if any and launch Safari again to test.
        Turn on those one by one and test.

  • IPhone 5s problems after upgrading to iOS 7.1

    Hi
    I had problems with my iphone on 7.0.6 ( the apps were crashing and mail didnt work) so i thought that if I upgrade it to 7.1 it will help but it didnt.
    I restored my iphone and then it got stuck on the apple logo that loads the iphone after the restore.. its been a while and the iphone turned on but then when i tried to restore my backup the iphone crashed and i had a blue screen and it rebooted like every 10 seconds so i restored again in DFU but nothing seems to help it got stuck on the apple logo and like every hour or something it reebots and blue screen comes again.....
    please help meeeeee

    please i have the same problem when i update ios 7.1.2 my phone can not restart  and still on logo of iphone state do not work ... but i press on home and power till open >>> does this mean the software does not instal well ????
    second my phone when i open any application an press on the screen can not open any thing and i press on home still open and close same application many times how i can solve this problem please ??do you know what is best software i can install it and how ??
    thanks

  • Iphone 4s problem after upgrading to iso 5.01

    hello dears plz i need ur help...
    i have iphone 4s and i just upgraded the software to iso 5.01 through the iphone itself,,,
    after the ugrade <<<<itunes cannot find my iphone :::(((((((((>>> what i do?
    plz help me plzzzzzzzzzz

    No need to shout...
    See if these Links help with Your Issue...
    Device Not Recognised
    http://support.apple.com/kb/TS1538
    And Here
    iPhone, iPad, or iPod touch not appearing in iTunes

  • Clock problems after IOS 4.2 upgrade

    We have 2 Iphone 4 at home, each connected to a different computer ( 1 Mac, 1 PC ).
    After the upgrade to IOS 4.2 both have a problem with the clock. When the phone is put on "update clock automatically" ,the following happens (We live in Belgium)
    -Phone 1 switches to summer time as soon as a connection with the provider is made. If you go to fly mode, or put the clock on manual, the correct time is displayed. This occurs wherever you are so it is not linked to the information provided by the cell tower. After a hard reset and restore, this problem was solved.
    -Phone 2 is even stranger. I was in NYC a few weeks ago and set the clock manually on EST. Back in Belgium everything worked fine until after the upgrade. Now the clock will go to EST overnight, ie when I wake up in the morning at 7 AM, it is suddenly 2 AM in the morning. Here, if you go to manual setting of the clock, then switch back to automatic setting, it works fine again.... until the next morning ! And I don't switch off the phone at night
    I guess a hard reboot + restore will be needed as well.
    Anybody else came across this problem ?

    Since 2 days I have the same problem with my Iphone.
    I also live in Belgium and my phone was all of a sudden 1 hour ahead of our local time. I modified the clock settings to manual and then the time switched back correctly. Today somewhere between 8 and 11 AM I noticed the clock was 1 hour ahead again. I adjusted the clock settings to manual again and the clock is correct again. How come this is happening ?
    It all started since my upgrade to version 4.2.1.
    Can someone please take a look at this ? For the record I use the 3 GS 16 GB version. My provider is Proximus.
    Seems my favorite Apple is starting to look a lot like Microsoft since this is the second major time/clock bug in a few weeks.
    Message was edited by: Renny74

  • 8350i Sprint-Nextel problems after OS 5.0 upgrade

    1. Keyboard lock icon gone.  Function now works via "MUTE" key.
    2. Some application shortcuts no longer work ("protocol not supported - type in a different url" is the message). Unresolved - no solution found.
    3. No matter what notifier or downloaded song I pick as the SMS or MMS message alert, alert rings as "notifier-crystal" even though something else appears on the ring tone line.  Unresolved - no solution found.
    4. Text message problem (before and after upgrade) - MMS/SMS messages not being received (intermittent).  Only way I know its happening is if I try to send a text and get a red "x" or friends call me and ask why I haven't responded to their texts.  Simple solution - turn unit off then on (battery pull not needed).  Then text messages start pouring in.  Work OK for a while then they stop again.  Tech assistance did some over-the-air resets and made me change/verify some settings.  Did not work.  I find myself turning phone off and on several times daily as a band-aid solution.  Sometimes occurs with emails too.  Very annoying.

    Welcome to the forums
    OS 5.0 isn't official yet so you may face bugs/issues with it. Other than that, I can suggest a battery pull and resending your service books from the BIS site.
    Cheers,
    Kijana
    Please remember to:
    1. Mark Accept as Solution on the appropriate post once your issue has been resolved
    2. Give Kudos to helpful posts (click the star next to the post)
    Thanks

  • Problems after iOS 4.2 upgrade.

    Hello everyone, hope you are all well.
    Could use some help to restore my 2G Touch after upgrading it to 4.2 the other day. During the upgrade, all it`s music and all the app`s were lost, but after re-synching only the music and the original factory app`s returned. None of my downloaded app`s ( paid for and free )returned.
    Several e-mails to Apple support and trying their fixes have not solved the problem.
    Any idea`s?. Cheers, Pete.

    After you re-download any App, you probably need to turn the check-mark (for Syncing) back on for each of those Apps.
    Connect iPod and while it is Syncing, look on Device/Apps and after making sure *Sync Apps* is ticked on, look at each individual app on the list below the *Sync Apps* box and make sure they all have a tick in their box.
    By the time you've made any changes here, the Sync may have gone past Apps or even finished completely, so you need to Sync or Apply after your change.
    Phil
    Message was edited by: the fiend

  • Start up problems after 10.6.2 upgrade

    After upgrading to 10.6.2 my computer restarted and hung up on a circle with a line through it. I restarted, the same. i reinstalled Snow Leopard and can now run normally. I ran Disk Utility and it said everything was fine.
    I want to keep my iBook Pro running up to date software, but I want to solve this first. According to a document on the support website, the circle with a slash through it means, "could not load boot.efi, or some other issue" and I have no idea what that means or what to do about it.
    Thoughts?

    That's a little helpful. Thanks. I did use Disk Warrior a couple of years ago but stopped when it stopped launching, giving me some error code I couldn't decipher.
    Now what do I need to do about? Will the problem reoccur if I try to upgrade again?

Maybe you are looking for

  • Spellchecker in Mail how do i exit it ?

    Hi all, while using Mail on my MacBookPro i compose a new message and click SEND and it Checks the spelling and lets me correct it and then the Email gets sent. Quite often i am looking at the email while the spellchecker is on the screen doing its s

  • FDM - russian locale?

    Hi All, I'm interested if Russian localization is planned for FDM? Is it possible to customize/translate UI in FDM? Any documentation on this? Thanks. Alex

  • Downloading movie - error 5060 - anyone experienced?

    Downloading a movie on Mac/iTunes - 2.01 GB of 2.01 GB complete - then "stopped" with error msg "We could not complete your iTunes Store request. An unknown error occurred (5060)". Any ideas? I have purchased music/films regularly from iTunes Store -

  • Lumia 620 and Class 10 SDcard.

    Hi guys, I am new to this forum. I am planning to buy a SDcard for my lumia 620. I am getting vague reviews about class 10 support with 620. Its working for some and not working for few. Kindly help me out. I know class 6 is prefered for my kind of d

  • Problem in Purchase info Record

    Hi All, When i try to put price in the inforecrd, it gives the Error that "Not possible to determine a condition type for the price" What does it mean... I have used P000 condition type in my Pricing for gross price... is this affecting this? And als