Iphone 4s problems help please
recently i had a few problems lately i haven't been recieving any phone call but they say that they call me what to do
call your carrier and report the issue.
Similar Messages
-
Iphone 4
16GB
Ios Version 7.0+ (Can't Remember specific ios)
Last night i was using my iphone 4 before i fell asleep and i clearly remember the battery % being at 83% but when i woke up my iphone was off and would not turn on. My first thought was maybe it had died so i plugged it in and waited 4 hours but unfortunately that did nothing. I also tried to reset it multiple times by holding the home and power button at the same time still nothing. I decided to try DFU mode and i thought finally i had fixed it but after the recovery being stuck at Waiting for iphone for 10+ mins a error popped up it was called Error 4005.Please helphold home/power button for 20-30seconds until apple logo shows.. might not work first time try to do it 2nd time for sure it will turn on again .. make sure you hold home and power at same time for 20-30seconds
had this problem a lot ! returned iphone 4 im really happy using iphone 3gs again -
My Macbook Air does not pick up wifi from Airport but iMac, iPad and iPhone do. Help please.
My Macbook Air does not pick up wifi from Airport but iMac, iPad and iPhone do. Help please.
Are you testing in the same room as the TC?
Power cycle the TC.. does it show up now?
Has it ever showed up .. ie is this a problem that just started from an existing setup, or has never worked?
Is the TC new? If old how old?
If you continue to have issues.. setup the TC from iMac and preferably using ethernet.
Change the wireless names to SMB compatible ones, short no spaces, pure alphanumeric.
Use WPA2 Personal security only.
Then set the wireless channels manually.. try 11, 6, 1 for 2.4ghz and try 36 or 40 at 5ghz.
Tell us how that goes. -
Mail won't keep password saved on iPhone 4. Help please?!?
I am suddenly unable to retrieve email. iPhone 4 will not save my password in settings.
I am able to configure my email successfully on a different iPhone (3GS).
Help please!
Thank you!cutwright 93,
I have a 4s, and I've had that problem, too. I've tried every method mentioned on the boards. If Ellips's suggestion didn't work, try this, and please let me know if it worked:
(I did the following while the phone was connected to my pc...if that makes a difference.)
1. On the phone, go to Music.
2. Click "More."
3. Click "Shared."
4. My phone lists "iPhone" and my iTunes Libary. Try clicking the name of your music library.
5. Wait until the circle makes its loop.
The synch still failed to complete, but all of my music was on my iPhone, again. Whew. -
I am confused about Icloud. I have a 5 year old Macbook, a 2 year old macbook and a 5 year old mac mini. What exactly do I need to do to get all this connected via Icloud. I also have an Iphone 3G. Help please! Also, I still don't understand exactly what the benefits are. At the moment it seems a lot of hassle to change a system that's been working perfectly well and that I'm very happy with. I'm not at all sure whether the mac mini (1.66 GHz INtel Core Duo) can be brought up to the relevant spec to run ICloud. Any thoughts?
There are two aspects to iCloud. One is simply getting an account, or migrating a mobileme account to iCloud. The second part is using the various features of iCloud to sync contacts, calendars, use music match or photo sharing, and store iWorks documents.
First to get an iCloud account:
If you have a mobileme account, you can migrate by simply logging onto www.icloud.com (ignore any references to Lion and just click through to complete the migration). If you have OS X Lion or an iOS 5 mobile device, you can create an iCloud account on that device using any valid AppleID.
Once you have an account, you can use JUST the mail account if you wishi - it is a standard IMAP account so you would set it up like any other IMAP email account you have, in whatever client program you use to read email.
To use the OTHER feautes of iCloud, your computers will have to be running OS X Lion (10.7). Your iPhone 3G will never be able to use iCloud as it cannot run iOS 5 (you need a min. of an iPhone 3GS to run iOS 5).
The requirements for OS X Lion are here - http://www.apple.com/macosx/specs.html You need a min. of a Core 2 duo processor so you mini is not capable of running Lion.
So, in your case, the single reasons for iCloud would be if you have a mobileme account, then use the online www.icloud.com to migrate your account so you do not lose your @me.com email address. You can use iCloud email (without using any other iCloud features) by setting it up as IMAP mail with these settings - http://support.apple.com/kb/HT4864
If you want an iCloud account and do NOT already have a mobileme account, you will need to upgrade one machine at least to Lion in order to be able to create an iCloud account. -
My apps on my iTunes, on my computer will not sync onto my iPhone 4s. HELP PLEASE!
My apps on my iTunes, on my computer will not sync onto my iPhone 4s. HELP PLEASE!
Is your iPhone's name listed under DEVICES in iTunes?
-
I have an iPhone 6 and during the setup I must have did something wrong and now I have my old iCloud account on it that I no longer remember the password, security questions, and no longer have the email address to that account. I think I was hacked and my password and security questions changed. I want to log out of iCloud and start using my current iCloud account. I know these are security measures, but how can I get logged out??? My iPhone is having problems since the latest update and now I can't make a call or text. I can't call apple support without a working number HELP Please.
Hello shelbyrecords,
Oh no! That sounds really frustrating. Unfortunately, if iCloud Find my iPhone Activation Lock is enabled on the device we’ll need to gain access to your previous Apple ID account to disable it. Based on the information you have provided, it sounds like you may need a personalized support experience to recover your previous Apple ID:
If you forgot your Apple ID password - Apple Support
http://support.apple.com/en-us/HT201487
Make sure that you’re entering the correct Apple ID. In most cases, your Apple ID is also the primary email address of your Apple ID account. If these steps didn't help you change your password, contact Apple Support.
Thanks,
Matt M. -
I don't know why whenever i choose " check for updates " and download itunes 11.1 on my desktop , it never shows any downloads .. even when i tried downloading it from the website, and i need itunes 11.1 so i can restore my iphone again .. help please
When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
VIRUS PROBLEMS, HELP PLEASE???
I continue to have messages popping up saying my computer is infected. It wants me to cleanup and I have to register with Mac Shield 2.6. Pronograhic websites keep popping up. Anyone having this problem? Did not have this problem yesterday, but it's here today! There is also a Red Sheild on the top of the toolbar where it shows the time, battery life, etc. Right clicking on the sheild drops down Scan Now, Cleanup, Control Center, Scan, System Info, Settings, About, and Register. A pron site just popped up again! Need help Please!!
Fuony wrote:
The Mac Shield malware can come through Firefox too if you allow it to and you click on it!
Your exactly right, it is possible that if you visit a site and need the scripts to run for something that the malware that uses Javascript is on that site, then your going to be presented with it.
The thing is with the Firefox + NoScript combination defeats alot of the web side trickery the malware authors are using to get the malware to appear in the first place.
Also this "MacDefender" isn't the only malware making the rounds. There are some serious Flash vulnerabilities being hosted on hostile/adult websites that are running scripts for no apparent reason other than to try to infect your machine.
By running all scripts all the time, your computer is in a state as if you tried running across a busy highway blindfolded.
As a lifelong "MacHead" I can understand Apple loyalty, but if Apple isn't cutting the mustard on their browser security, rather place their users security at serious risk for the sake of convenience, then I have to think about using and recommending to others something else that is more secure.
As a example, I surf thousands of web pages a day, some on really nasty sites, yet I haven't seen this "MacDefender" appear on my computer. Even when I purposely visited links that people have submitted that had the malware. (I maintain a couple of bootable clones of my boot drive just in case) -
Soundtrack problems - help please
Help please. I tried doing a send to multi-track project from FCP with the base layer video option and kept getting the 'error sending selection to Soundtrack Pro' message. I did a search and the suggestion is that I have no disk space but I have over 600GB!
Then I tried a send with the full video and the file saved okay. However when I try to open the .stmp file, Soundtrack Pro starts and then freezes. I've tried opening in various ways.
Help please, I just cannot figure this out! What am I doing wrong?Not sure how much help this is, but since you're having problems with the layout, did you try deleting the layout file? MacintoshHD/users/username/Library/Application Support/Soundtrack Pro/Layouts
BTW, I found a BKiLifeConfiguration.plist in the following path:
MacintoshHD > Library > Application Support > ProApps > Internal Plug-ins > BrowserKit > iLife.bkplugin > Contents > Resources
Do you find it there? -
SQL INSERT problem - help please
Hello,
I'm having a problem with INSERT statement.
There is a "ShowFinal.jsp" page, which is a list of candidates who selected from the second
interview. The user picked some candidates from the list and conduct the 3rd interview. After
he check suitable candidates(who are selected from the 3rd interview) from the list , enter
basic salary for every selected candidate, enter date of interview and finally submit the form.
These data should be save into these tables.
FinalSelect(nicNo,date)
EmpSalary(nicNo,basicSal)
In this "ShowFinal.jsp" page, it validates the following conditions using JavaScript.
1) If the user submit the form without checking at least one checkbox, then the system should be
display an alert message ("Please select at least one candidate").
2) If the user submit the form without entering the basic salary of that candidate which was
checked, then the system should be display an alert message ("Please enter basic salary").
These are working well. But my problem is how to wrote the "AddNewFinal.jsp" page to save these
data into the db.
Here is my code which I have wrote. But it points an error.
"AddNewFinal.jsp"
String interviewDate = request.getParameter("date");
String[] value = request.getParameterValues("ChkNicno");
String[] bs = request.getParameterValues("basicSal");
String sql ="INSERT INTO finalselect (nicNo,date) VALUES(?,?)";
String sql2 ="INSERT INTO EmpSalary (nicNo,basicSal) VALUES(?,?)";
for(int i=0; i < value.length; i++){
String temp = value;
for(int x=0; x < bs.length; x++){
String basic = bs[x];
pstmt2 = connection.prepareStatement(sql2);
pstmt2.setString(1, temp);
pstmt2.setString(2, basic);
int RowCount1= pstmt2.executeUpdate();
pstmt1 = connection.prepareStatement(sql);
pstmt1.setString(1, temp);
pstmt1.setString(2, interviewDate);
int RowCount= pstmt1.executeUpdate();
Here is the code for "ShowFinal.jsp".
<form name="ShowFinal" method="POST" action="AddNewFinal.jsp" onsubmit="return checkEmpty() &&
ValidateDate();">
<%-- Loop through the list and print each item --%>
<%
int iCounter = 0; //counter for incremental value
while (igroups.hasNext()) {
Selection s = (Selection) igroups.next();
iCounter+=1; //increment
%>
<tr>
<td style="background-color:ivory" noWrap width="20">
<input type="checkbox" name="<%= "ChkNicno" + iCounter %>"
value="<%=s.getNicno()%>"></td>
<td style="background-color:ivory" noWrap width="39">
<%= s.getNicno() %> </td>
<td style="background-color:ivory" noWrap width="174">
<input type="text" name="<%= "basicSal" + iCounter %>" size="10"> </td>
</tr>
<%
%>
Date of interview<input type="text" name="date" size="17"></td>
<input type="submit" value="APPROVE CANDIDATE" name="B1" style="border: 1px solid #0000FF">
</form>........................................................
Here is the error generated by TOMCAT.
root cause
java.lang.NullPointerException
at org.apache.jsp.AddNewFinal_jsp._jspService(AddNewFinal_jsp.java:70)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:137)
I have goto the file "AddNewFinal_jsp.java". The line 70 points to the following line.
for(int i=0; i < value.length; i++){ [/b]
Please can someone help me to solve this problem? Please help me to do this task.
Thanks.Hi Casabianca ,
It is clearly that your problem is not on the database end, more like a servlet/jsp issue.
I will not comment on the javascript portion, but rather the 2 jsps.
a simple way to trace what's go wrong is to check the final result (the html code) of the first jsp (showFinal.jsp), and compare against what is expected by the 2nd jsp (AddNewFinal.jsp). Most browser do provide "view source" on the page visited.
the following code
<input type="checkbox" name="<%= "ChkNicno" + iCounter %>" value="<%=s.getNicno() %>">
<input type="text" name="<%= "basicSal" + iCounter %>"
would likely to be "translated" to html code something as follow:
<input type="checkbox" name=""ChkNicno0" value="nicNo>">
<input type="text" name="basicSal0">
the original code in "AddNewFinal.jsp" using
request.getParameterValues("ChkNicno");
which looking for a none exist http request parameter (sent as "ChkNicno0",etc but look for "ChkNicno"), which has explained before.
the second attempt to use String[] value = request.getParameterValues("ChkNicno" + iCounter); give Cannot resolove symbol :iCounter. because iCounter never defined in the 2nd jsp!
Most of the error message do give clue to cause of error... : )
not too sure on your intension, assume you wish to update only those selected (checked) row to db.
some suggestions:
1) <input type="text" name="ChkNicno" size="10"> </td>...
<input type="text" name="basicSal" size="10"> instead.
then use javascript to based on checked element index (refer to javascript spec for more details), for those index not checked, clear off the correspond index "basicSal" field value.
e.g. ChkNicno[1] is not checked, empty basicSal[1] value before submission.
This will give us only selected rows values.
2) retain the code
String[] value = request.getParameterValues("ChkNicno");
String[] bs = request.getParameterValues("basicSal");at 2nd jsp, as now the http request will pass parameters using "ChkNicno" and "basicSal".
3) some change to the code for optimization
for(int i=0; i < value.length; i++){
String temp = value;
for(int x=0; x < bs.length; x++){
String basic = bs[x];
pstmt2 = connection.prepareStatement(sql2);
pstmt2.setString(1, temp);
pstmt2.setString(2, basic);
int RowCount1= pstmt2.executeUpdate();
pstmt1 = connection.prepareStatement(sql);
pstmt1.setString(1, temp);
pstmt1.setString(2, interviewDate);
int RowCount= pstmt1.executeUpdate();
to
pstmt1 = connection.prepareStatement(sql);
pstmt2 = connection.prepareStatement(sql2);
for(int i=0; i < value.length; i++){
String temp = value;
for(int x=0; x < bs.length; x++){
String basic = bs[x];
pstmt2.setString(1, temp);
pstmt2.setString(2, basic);
int RowCount1= pstmt2.executeUpdate();
pstmt1.setString(1, temp);
pstmt1.setString(2, interviewDate);
int RowCount= pstmt1.executeUpdate();
preparestatement created once should be sufficient as we do not change the sql statement throughout the loop.
there are better solutions out there, this just some ideas and suggestions.Do try out if you wish.
Hope it helps. : ) -
Multiselect problem Help please!!
Hi all,
I am currently using Application Express 3.1.2.00.02 I have developed an online questionnaire with a multiselect list for one of the questions. The problem i am having is that i need each choice to be totaled up separately on the report generated.
My table of answers looks like this:
Column name e.g. (Question 9)
Answer "Dog" "Cat" "Mouse" "Snake" (underneath column name Question 9 depending on what is selected).
The reporting page would look like below:
*(Column Question 9)* Count
Dog 1
Mouse 1
Snake 1
and for the question you could have another respondent who chooses similar of items on the multiselect, so their answer looks like this:
Answer
"Question 9" Dog
"Question 9" Snake
This would then start a new row on the reporting page like below which is not what i want:
*(Column Question 9)* Count
Dog 1
Mouse 1
Snake 1
Dog: Snake 1
But the report should look like this:
*(Column Question 9)* Count
Dog 2
Mouse 1
Snake 2
The current SQLquery i am using is below:
select "QUESTION 9",
count(*) c
from "P1 DQUESTIONNAIRE"
group by "QUESTION 9"
Thanks for your help and suggestions,
'S'How to make sure your forum post will never be answered:
1) Make sure your subject line is completely meaningless (i.e. HELP PLEASE!) and describes no part of your actual problem
2) State that you are having "a few problems" but make sure to offer no details whatsoever what those problems are or what the symptoms are.
3) Post large volumes of code instead of distilling the problem down to a compact snippet
4) For extra points, make the code hard to read by refusing to make use of the "code" tag. -
K8N Neo2-fx Ram problem Help please
I have three ram(2x512MB single sided , 1x1GB double sided). Is there any way I can put them all on the motherboard? When I place them all the computer is not starting and it`s making a "beep" every 2-3 seconds. If i connect the 1GB double sided on the Dimm1(green) and the one 512MB single sided on the Dimm3(green) it`s working properly. Is there any way I can use all my ram at the same time. I`m desperate. Help please... thank you
Quote from: wodahS on 09-November-06, 05:55:17
How can I put my computer facts under any post I am posting? I should make it my signature?
That's the rule mate which you need to gives all your component in details including your PSU and Bios revision so that others can help you! Like what BOSSKILLER say it won't works with 3 DIMMS unless you purhased another 1 GB of RAM then it can solve your problem with 4 DIMMS or else with 2*512MB RAM. Make sure that you've lowered your HT to <=800Mhz as default is 1000Mhz. GD luck. -
Wifi connection problems for iphone 4S. Help please!
I just got the iphone 4S the other day and was able to connect to my wifi and now 3 days later it won't let me connect to it? It asks me to put in the password and I KNOW I'm putting in the correct password. Any idea what could be causing me to not be connected now. It is frustrating because it won't let me get on itunes, download apps or do facetime which is what I really wanted to try to do.
Hi jenjenjab19
The problems you have described are very frustrating. I would be glad to look into this with you.
Have you tried resetting your home Wifi? Please try a soft reset on the iPhone and retest. Here's how to reset the device: http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=47670
Please let me know if this helps.
Thank you
JoeL_VZW
Please follow us on twitter @vzwsupport -
Rom UK to South IPhone 3GS Synching Problems - HELP PLEASE
Hey, I need help.
Every time I connect my iphone to my HP laptop, it says it can't read the iphone and wants to restore the software.
I go through this route, and it sometimes allows me to synch my contacts, but I have no joy with apps or music. This iPhone has worked perfectly with this PC previously.
I am now running the latest iTunes software and also iOS4 on my iPhone and still no success.
I get a message saying that an iPhone has previously been synched with this PC, which is true, as it is my one and only iPhone.
As an aside, but may be related, I recently moved from UK to South Africa, and had my iPhone unlocked by o2 in the UK and now work from a Vodacom sim card.
I've taken my iPhone and laptop into a local Apple store, and whilst it appeared to work in the shop, as these things always do, when I got home, reconnected, I got the same problem and has to restore my iPhone completely.
Can anyone possibly help.
I feel I need to get my iTunes to recognise that this is the iPhone thats been synched with it in the past.
Other random error messages I get are things like, "cannot sync as item is a folder rather than a file"
HELPWelcome to the club. This is a problem that has surfaced with OS 3.0.1 and continues into 3.1. All 3rd party apps crash at startup on iPhone 3g and 3gs. OS 3.0 didn't behave this way and Apple apparently has no comment to make on the matter.
Maybe you are looking for
-
Hi there, I am using a thorlabs fw102B filterwheel. It's connected via USB (simulating COM port, that's what it says in MAX). The second device is a camera, also connected via USB. The application is running 24/7, at least that's what it's supposed t
-
Exactly what is input power for DAQPad-6015?
If we include the DAQPad-6015 in our system, what power do we connect it to? Using what type of cable or connector?
-
I have successfully merged two projects in order to add new photos for my book. The library available to the book which has 26 completed pages accesses only the original project library. Has anyone else had this problem ? It is frustrating to see
-
Non-Admin not being shown update button on XP
Non-Admin users on XP are not being shown the option to trigger an update. The mozilla update service is installed but as normal users aren't able to start the update process it never gets as far as starting it. When a new update is available a link
-
Import problem SQL Developer 1.51 Build 5440
importing data using XLS file, the import wizard did not move to next step after selecting the required XLS file where as importing the same XLS data after converting into CSV format, it completes the process. although it is mentioned in the HELP tha