IPhone 4S shows Bars and 3G, no connection

I just got my iPhone 4S, and have had my AT&T connection activated, I show plenty of bars, and the status bar reflects a 3G signal, but I am not able to connect to internet, make calls or use SIRI without WiFi.  Texting also does not work.  I have tried resetting network connection, replacing sim card, and have had no luck.  Am going to schedule a Genius Bar appointment but would be very happy if I can cancel it.  HELPP

Got e-mail from Apple stating that there were "features with my account that were incompatible with my new iPhone".  Lady was very nice, tried serveral things and at the end of about 1/2 hour, she said that my iPhone was now fully activated, though I was no better off, plus my 3GS now was nothing more than an iPod now.  She referred me to Technical Support (I already had a Genius Bar Appointment Scheduled).  Woke up this morning to give the phone another try, and lo and behold it WORKS!  I had read on MacRumors that there was some glitch with the network configurations centrally (at AT&T or Apple) and once it was sorted out it took about 24 hours for the changes to make it downstream to the user.  Maybe this is a ray of light for some.  Just glad I am no longer the holder of a 64Gig $400 brick.  Good Luck to all!

Similar Messages

  • My iphone 4 will no longer connect to my Itunes since 7.1.1 update itunes has latest update as well followed help which involved using mobile device properties no good re installed itunes still same problem iphone is showing up on pc as connected

    my iphone 4 will no longer connect to my Itunes since 7.1.1 update, itunes has latest update as well followed help which involved using mobile device properties no good re installed itunes still same problem iphone is showing up on pc as connected but itunes unable to see it
    any Ideas cheers

    Try holding the power and home button untill the apple symbol appears and let it reboot, if that does not work Try a DFU restore https://discussions.apple.com/thread/5269891

  • My iphone 4 is disabled and asking to connect to itunes..... but i resently restored my laptop by which i deleted itune.. so i dont have any back up. so now how can i unlock my phone without restoring it to factory settings... because i eant all my stuff

    my iphone 4 is disabled and asking to connect to itunes..... but i resently restored my laptop by which i deleted itune.. so i dont have any back up. so now how can i unlock my phone without restoring it to factory settings... because i eant all my stuff

    there should ba a way to undisable it without loosing all of your data

  • My iphone 4 is disable and it say connect to itunes and i did that but it still wont unlock what do i do now???

    my iphone 4 is disable and it says connect to iTunes so I connect it to iTunes and nothing happens I have done this a couple of times and it is really ******* me off and I need help

    when I connect the USB plug into the computer it tells me iphone is in recovery mode you need to unlock before connecting to iTunes then when it say restore and update it does it for like 10-15 min then it turns on the phone then I have to do it all over again

  • Hi, my iphone is disabled now and it says connect to itunes but there are some problems to fix it .

    Hi, my iphone is disabled now and it says connect to itunes but there are some problems to fix it .
    Firstly, i reset my computer few days ago and never used itunes after that .
    Secondly, the power button on the iphone is broken so i can't set the recovery mode on the phone.
    I Tried connect the itunes with the iphone but the all itunes says 'To allow access , please respond on your iphone' but there's nothing i can do,
    iphone doesn't respond at all .
    I need some help .... i tried everything i could do ..

    Hey jinyoung_20,
    Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, and express replacement service:
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
    Welcome to Apple Support Communities!
    Sincerely,
    Delgadoh

  • My iphone 5 require activation and i have connected with wifi but it is unable to activate

    my iphone 5 require activation and i have connected with wifi but it is unable to activate

    It needs a SIM card installed.

  • My iphone 3gs is disable and asked to connect with itunes

    my iphone 3gs is disable and asked to connect with itunes

    See this document
    iOS: Forgot passcode or device disabled

  • Why is my iphone 4s showing me 3G but not connecting (It did until now with no problems)?

    why is my iphone 4s showing me 3G but not connecting (It did until now with no problems)?

    Hello, Gadag. 
    Thank you for using Apple Support Communities.
    Here is a resource you may find helpful that will walk you through some troubleshooting steps for this issue.
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/TS3780
    Cheers,
    Jason H.

  • Iphone 6 shows blue and red screen and shut down

    since some days my iphone 6 shows blue and red screen and shut down, after some minutes it restarts, today its already down 30 minutes.
    What can I do ?

    Hello Oliver,
    Thank you for using Apple Support Communities. 
    The following article covers what you can do if your phone is restarting when you are using it. 
    If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
    Regards,
    Jeff D. 

  • IPhone 5, 3-bars and "LTE" but no internet connectivity in certain spot...

    I have an iPhone5 with Verizon LTE and I get GREAT service all over San Francisco EXCEPT at my garage! I can't understand it, everywhere in the city: at home, at work (in the basement of a concrete building), all over the place I get full LTE service but for some reason in this ONE spot on a residential street two blocks from my house I'm having some problem. It's a garage I rent and in there, I have bars and it says "LTE" but the connection ALWAYS times out. Not just inside the garage, but just outside as well. Location is 23rd at San jose in San Francisco. I even typed the *3001#12345#* thing to see the exact numbers and they are -84 at the garage but around -100 at home and at work where I get great service. For some reason in this one spot, it will say I have service, but it can't connect.
    Why does this happen??

        @akpasta,
    Thanks for keep us posted!
    I show great coverage in that area and no reported issues with data. Has it always been this way in the garage? Please keep in mind that we cannot guarantee service indoors, as there are many factors out of our control that can interfere with the signal. For issues while indoors we recommend our network extender http://vz.to/1b3bWa7. This is a great accessory and definitely worth the investment.
    One thing you can try is resetting the network settings http://vz.to/1g5YUtN and removing the SIM card for a minute and retesting.
    Keep us posted if you need further assistance.
    JohnB_VZW
    Follow us on Twitter @VZWSupport
    Let's try

  • Exchange - iPhone still shows deleted and cancelled appointments / meetings

    I have an iPhone set up to correctly sync with Microsoft Exchange, and email and contacts appear to work correctly. The calendar, however, keeps showing appointments and meetings which were deleted, cancelled, or moved in the past. These are typically repeating meetings originally scheduled in Exchange by another person, where I accepted the meeting invite and then the meeting cancellation a while ago.
    I am thinking of deleting the entire calendar and starting over, but somehow I'm not sure this will resolve the issue. Any advice?
    (I have the iPhone set to sync mail, calendar, and contacts to my company's Exchange server).

    Interesting; the turning sync off then back on approach seemed to work. Sort of. I did the following, and it seems to have worked -- for now:
    1. In Microsoft Outlook on my Windows machine, I went and straightened up my schedule, declining any leftover meeting invitations (but not sending a reply) to all the items I wanted off of my schedule.
    2. On my iPhone, went to Settings, then Mail, Contacts, Calendar, then the Exchange account. Calendars was set to "On" and I switched it off". Tapped on "Stop Syncing", and then I confirmed the calendar was erased from my iPhone.
    3. Went back into Settings for the Exchange account, then switched Calendars back to "On". Made sure I had a WiFi/high speed connection active, since I'm on an original iPhone and re-loading my whole calendar over EDGE didn't seem like a good idea.
    Also, not that it makes a difference, I also have my "Mail days to sync" set as far back as it'll go (1 Month).

  • Iphone not showing up in itunes & not connecting to computer

    Rite...
    When i plug my iphone into my computer (WinXP, SP2) via the dock and straight from the USB cable, it does not show up in iTunes, Windows does not recognise it as a USB device and the camera pop doesnt show up. Basically Windows isn't recognising it at all.
    I've tried:
    restarting my computer.
    reinstalling itunes.
    creating a new account on my pc, installing itunes and seeing if it connects; it did and worked fine, i logged out and and back onto my own profile, my iphone showed up and synched fine. I then restarted and the same problem occurred.
    I've tried it in all my USB ports, and none want to read it. I have also tried other USB devices, which also don't want to be recognised. This wasn't the case a couple of days ago.
    Also my iphone docked and synched fine after the upgrade both to itunes and the iphone.
    Anyone else having this problem? I think it's a general USB problem with my PC, anyone have any ideas.
    Argh it's annoying!!

    I tried this:
    "The problem seems to be that the install process treats everything PC like a Vista machine. If you go to C:\WINDOWS\system32\DRVSTORE you'll find an oddly named directory inside it like usbaapl_A65621D65F5B7507DD7B22331826547BDD2D206B.
    Go into it. You'll find USBAAPL.CAT, usbaapl.inf and usbaapl.sys.
    What I did was right click on the .inf file and pick install (don't know for sure if it needed that, but I'm not going to omit any steps just in case).
    Open up C:\WINDOWS\system32\drivers and copy the usbaapl.sys file there.
    Open up C:\WINDOWS\inf and copy usbaapl.inf there.
    Again I right clicked on the .inf file copy in the C:\WINDOWS\inf directory and hit install. It then created the corresponding usbaapl.PNF in that directory.
    I unplugged the pod from the usb port, rebooted the system, plugged the pod in again and voila, there it was. It found it and installed correctly"
    Which didn't work.
    - My iphone appears in the Services under 'Apple Mobile Device Service'
    - I can't verify the iphones driver because nothing is showing up in device drivers/managment
    -I have USB 2.0

  • IPhone 4S showing MNC and MCC

    Hi,
    I'm currently in South Africa, carrying an iPhone4S which I bought in Singapore about 2 years ago. I bought a card from 8.ta, which is one of the Mobile Operator in South Africa. The MicroSIM was inserted into my iPhone 4S and the Network name shown 655-02, which is the MCC and MNC for 8.ta. However, it stays like that without changing it to normal. While I put the same card into my iPad, it displayed 8.ta normally.
    For the past two weeks I keep changing the same card from iPad to iPhone and vice versa, iPhone keeps showing 655-02 and the iPad keeps showing 8.ta. May I know how is these display names, which are corresponding to the MCC and MNC, are stored in the phone memory? How can I refresh the memory so that I can get my iPhone showing the right Operator name as usual?
    In what condition the iPhone will try to refresh the PLMN and Service Provider Name? As far as I know the phone should read the Service Provider Name from the SIM card and displayed accordingly everytime they get the content from the SIM card, however iPhone looks like working another way round in achieving this, may I know how it is done?
    Best regards,
    Sean

    I actually worked it out - I deleted it and started it back up again - not sure why it did it in the first place, but I did find others who had the problem and explained how to fix it:
    https://discussions.apple.com/thread/3376904?start=15&tstart=0

  • IPhone 5 full bars and LTE but no internet (Verizon)

    Good Evening,
    I have an iPhone5 with Verizon LTE and I get GREAT service all over San Francisco EXCEPT at my garage! I can't understand it, everywhere in the city: at home, at work (in a basement), all over the place I get full LTE service but for some reason in this ONE spot on a residential street two blocks from my house I'm having some problem. It's a garage I rent and in there, I have bars and it says "LTE" but the connection ALWAYS times out. Not just inside the garage, but just outside as well. Location is 23rd at San jose in San Francisco. I even typed the *3001#12345#* to see the exact numbers and they are -84 at the garage but around -100 at home and at work, but I get great service at these places. For some reason in this one spot, it will say I have service, but it can't connect.
    Why does this happen??

    No, I'm really not sure if this is a hardware or carrier issue since the weird thing where it says I have service but the phone won't actually connect to any data.

  • Lightening cable iphone 5 shows peeling and the service provider says not covered under guarantee.I can see this is a clear case manufacturing defect.What is the remedy

    I find the lightening cable that came with the iphone 5 showing peeling of rubber .
    I had taken it to the local support (service point) who says it is not covered under warranty.
    As an engineer I can vouch that this is a clear case of material defect.
    What is my remedy
    T.Srinivasan.
    Chennai India

    I had taken the Iphone 5 with lightening cable under warranty to the service supporter here in Chennai India and after logging in the complaint the support engineer had informed me that the same claim was rejected.
    This happened a couple of months ago and now I find almost the entire cable has peeled off (Insulation).
    Initially I thought there perhaps was a chance for handling (carrying etc in your laptop bag) that could have caused the same.Now I am convinced that the material defect is the problem.
    Is there a way to bring this to the attention of Apple by email probably with a photo for them to appreciate my problem as the service support engineer authorised is unable to appreciate the problem.
    Thanks for your reply
    T.Srinivasan Chennai,India

Maybe you are looking for

  • How to create a z-tcode for a report in FSI3 transaction

    hi friends,           i want to create a z tcode for a report in FSI3 transaction, i have copied the program of the report and created a tcode in se93, but some more tabs are getting displayed in selection screen when im executing my Z Tcode, and rep

  • Quicktime Pro 7.3.0 and iMovie 6.0.3

    I am using iMovie HD 6.03 for a DVD project and after the Quicktime update to 7.3.0. - I suddenly have problems with the video clips. After starting up the iMovie program, I can only click on the few two or three clips in the clip viewer and play the

  • Masked EPS rasters shift!

    I'm noticing that every time I mask an EPS raster in Illustrator (13.0.1), the resulting PDF file always has the raster shifted ever so slighty (like a point). It doesn't happen with any other raster format. Nor does it happen if I embed the EPS befo

  • Will resetting allow reregeristing of the unit to someone else?

    I am new to the site. I use the Ipod as a remote only and no longer need it so I wish to pass it on to my child.  Hence the need to get reset to "out of the box" specs.  Any help is appreciated.

  • Trouble with audio devices

    I wrote a simple Java application to record audio on some mixer and then play it back. With my headphones / microphone connected, I got the following list of mixers: 1. Primary Sound Driver : Direct Audio Device: DirectSound Playback 2. Microsoft Lif