IPhone 4S signal loss after upgrade to iOS6

Does anyone has experimented a remarkable issue on the signal strength after upgrading the iPhone 4s to iOS 6? I'm having a lot of problems with the reception of my phone; most of the time I only can see 3 bars, and as soon as I grip my phone (with my left hand) the signal goes away totally and the "No Service" label appears; a side effect of this is battery life is much less as the phone is alway searching for signal (in the backgroun as I don't see the searching label).
Do we really have the "Deathgrip" issue again?
Please let me know if you've seen a similar behavor on your phone and if you fixed it, thanks.

Hi folks,
I've experienced the same symptom  - cell bars dropping away then 'Searching' message - after I installed IOS 6 on my iphone 4.  The only twist is that I only experienced the symptom when I had a location service-based app open like Apple Maps, Google Maps, Waze, or Scout.  I found a fix though!  After I reset my Network Settings the problem is gone.  Go to General --> Reset --> Reset Network Settings and activate it.  The only caveat is that you'll have to reconnect to your wifi-based network (if you have one) and type in your wifi password again.  Hope this helps.
dcz

Similar Messages

  • 3G Signal Loss after upgrading to ios 4.0.1 ?

    Hello Everyone,
    I don't think that I am the only one with a 3GS that is having this problem. I have the iphone 3GS, I was very excited to upgrade to ios 4.0. Once the upgrade was complete everything was just fine. Then came along ios 4.0.1, I figured why not. Isn't that what you are supposed to do to keep you phone up to date. Well, ever since I upgraded to ios 4.0.1 I have lost my 3G signal. My wife's phone is the exact same model, purchased at the exact same time. She is still running ios 4.0 and not having any problems. I spoke with Apple Care today and they said that ios 4.0.1 was in no way going to affect the 3G signal strength. Now, if I take my phone and my wife's phone and hold them side by side. She will have full signal and I might have one bar. Then when I go to safari and try to load a web page. Her phone,(with 5 bars) will download twice as fast as mine.
    Is there any way for me to go back to ios 4.0?
    Thanks Apple for fixing all of the iphone4 problems and creating one on the 3GS and then not acknowledging it.
    Any help would be greatly appreciated.
    Thanks,
    Demi

    THERE IS A GROWING AND VERY STRONG DISTASTE AT THE LACK OF SUPPORT AND INTERVENTION BY APPLE IN HELPING THE MANY THOUSANDS OF PAYING CUSTOMERS WHO HAVE PURCHASED IPHONES AND FIND THEY ARE NOT FIT FOR PURPOSE.
    I AM HAPPY TO INVOLVE THE BBC IN THE UK AND OTHER MEDIA SOURCES TO HAVE APPLE SIT UP AND TAKE NOTICE OF THE NUMBER OF DISSATISFIED CUSTOMERS WHO HAVE PAID LARGE SUMS OF HARD EARNED MONEY FOR A PHONE CAPABILITY THAT IS DISGRACEFULLY BAD. LIKE MANY OTHERS THE IPHONE CAN BE PLACED ALONGSIDE OTHER COMPETITOR'S DEVICES WHO HAVE CONTINUALLY GOOD AND CONSTANT SIGNAL STRENGTH WHILST THE IPHONE SHOWS NONE.
    ON A PERSONAL BASIS THIS PHONE HAS CAUSED ME TO LOSE OUT ON A NUMBER OF SIGNIFICANT PHONE CALLS, SOME INVOLVING THE DEMISE OF A RELATIVE - MATTERS THAT CAN NEVER BE REPLACED. AND YET THE ISSUES REMAIN.
    PLEASE, ANYONE, FEEL FREE TO EMAIL ME ON [email protected] WITH CONSTRUCTIVE COMMENTS ABOUT THE POOR QUALITY OF THE PRODUCT (IPHONE 4 OR 3GS) AND THE EXTENT TO WHICH THIS MATTER HAS BEEN OCCURRING AND THE IMPACT IT HAS HAD ON YOU EITHER DOMESTICALLY OR IN BUSINESS. I AM LEAD TO BELIEVE THAT THE FAULT DOES NOT LIE WITH THE NETWORK BEARERS, BUT IN THE APPLE IPHONE DEVICES THEMSELVES
    I CANNOT PROMISE TO DO ANYTHING OTHER THAN COLLATE THE EVIDENCE THAT IS COMING IN FROM SO MANY SOURCES AND PROVIDE IT TO THE MEDIA GIANTS THAT MAY CAUSE APPLE TO DO SOMETHING. FRANKLY I THINK ALL THE DEVICES SHOULD BE REPLACED WITH ONES THAT ARE FIT FOR PURPOSE OR REFUNDS GIVEN. PLEASE GIVE ME YOUR VIEW ON THIS IF WRITING TO ME. THANKS,
    THANK YOU FOR READING THUS FAR. JDMCB

  • Iphone 4 - signal issues after upgrading to latest ios 6

    I upgraded to ios 6, as suggested by itunes on my iPhone 4 and that's last day i was able to make a peaceful call.
    My signal just goes for a toss once i make a call. I see the 3g Symbol vanishing and the other person is not able to hear me but i am able to hear them.
    Once i disconnect the call, the signal changes to E and then goes to 3G. Tried the below solutions as suggested in forums, but no luck
    Please help..I am missing my iphone terribly.
    1) Shift + Restore using itunes - Didnt work
    2) Reset to Factory setting - Didn't work
    PLEASE HELP !!!!

    I have taken it out of the case - I figured it would obstruct the sensor (also have no screen protector).
    Only thing I haven't tried from the Basic troubleshooting steps you mentioned was to "restore as new".
    That I did try it tonight (succesffully restored), BUT my problem still exists.
    You mentioned to go in the MAC store > Would they replace it (for free) if they reach the conclusion it's some sort of manufacturer faulty wiring even if it's a 3Gs (as an old model)?
    Would they still if phone had water damage (this I'm just curious - the phone didn't)?

  • HT4061 im not able to activate my iphone 3gs after upgrading to ios6, saying server not available, what i can do

    im not able to activate my iphone 3gs after upgrading to ios6, saying server not available try later. im not able to make my phone work, not able to bring serial # im in guatemala what i can do?

    Activation issues are almost always the result of a device that has been hacked or jailbroken.
    If this is the case, no support can be provided here.

  • HT1414 how can i activate my iphone 3gs after upgrading to ios6? it could not activate....

    how can i activate my iphone 3gs after upgrading to ios6? it could not activate....

    If your phone was previously hacked to unlock it, when you updated the hack was removed and it's re-locked to the original carrier.  The phone will now activate and operate only with that original carrier.

  • HT204380 my facetime apps on my iphone 4S dissappeared after upgrading to iOS6 ... please help me find ??

    Help.... can anyone advise why my facetime apps on my iphone 4S dissappeared
    after upgrading to iOS6 ....... ????

    Yea, there is no standalone app for facetime. Select a contact, and at the bottom is an option to facetime call
    There is an app that is free called facedial for facetime
    By the way, there is a free IOS 6 book available for download in the Apple bookstore.

  • After upgrading to ios6 my iphone will not open .xls files in emails with the default viewer. Is there a fix for this? The same emailed .xls files still open on my ipad using ios5 while viewing email like they did on my iphone prior to upgrading.

    After upgrading to ios6 my iphone will not open .xls files in emails with the default viewer. Is there a fix for this? The same emailed .xls files still open on my ipad using ios5 while viewing email like they did on my iphone prior to upgrading. I have no special software like numbers or anything else installed on either device. Just using the default viewer provided by apple for viewing email.

    The attachment is an .xls excel 97-2003 spreadsheet. I viewed the file in the email and did not edit it with any software. I can forward the file to anyone that is may want to check it out to see if they can help me. I was wondering if there was some way of forcing another ios6 install on my phone and maybe that would solve it.
    Is there anyone out there that is viewing .xls files in email using ios6 w/o any other software installed like numbers or any other add ons? I am not upgrading my ipad from ios5 to ios6 so I can still continue to view the emails on my ipad. Is there an email viewer .xls plug-in that will be availablle in the next ios6 update?

  • Iphone not recognized by itunes after upgrading to IOS6

    After upgrading ti IOS6 my Iphoe opende and says "configure" and then tells me to connect to Itunes. Problem is that when I start Itunes and connect the Iphone to my computer via USBport is is not recognised by Itunes and not found as a unit. What do I do? The phone will not open and doesn´t funcion.... Anyone knows how ta handle this?

    Hi there Karin01,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    -Griff W. 

  • I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. Please help, restoring setting even didn't helped.

    I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.

    Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
    1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
    2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
    3. Do a soft and hard reset.
    4. Reset network settings.
    5. Back your data up, erase all content from settings menu, restore from backup.
    6. Reinstall your software( put it in recovery mode).
    I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :)

  • The search function in App Store, is not working in my iPhone 4, after upgrading to ios6

    The search function in App Store, is not working in my iPhone 4, after upgrading to ios6. Does anyone have a solution for this problem?

    Having the same problem.  No response from Apple as I tried all the suggestions.  Had to perform a system restore.  Currently iy's working.  Make sure you backup everything to your computer.  IOS6 is still glitchy in other areas.

  • I lost my contacts after upgrading to IOS6 on iPhone 4

    I lost my contacts after upgrading to IOS6 on iPhone 4

    At the most inconveient time possible(vaca) after downloading ICloud, All my phone contacts disappeared :( Wishing I knew how to uninstall to the way my phone was before.I leave in 4days.

  • Unlocked iPhone became locked after upgrade to iOS6 - what should I do?

    I bought an unlocked iPhone at the Montreal Apple store two years ago whie I was on student exchange there.
    Since about a year ago I've been using it in Israel with Israeli carrier. Didn't need to jailbreak it or anything, since it was bought unlocked.
    However, after upgrade to iOS6 this morning, it became locked and I can't use it again.
    Any ideas what to do? Did this happen to anyone else?

    You need to contact the Apple retail store in Montreal where the iPhone was purchased.
    If you still have the receipt, the receipt should indicate unlocked. 

  • My iphone 4s was stopped working after upgrading to IOS6.

    My iphone 4s was stopped working 2 days after upgrading to IOS6. Apple replaced it however same issue after upgrade. The new phone keeps reseting it self and turns it self off. Sometimes can not turn it on for hours, drains the battery really really quick. Anybody with same issues?

    It is probably still worth while taking it to an Apple store for a possible OOW replacement and let them make the decision, as it was broken before the OP took the back off.
    See note below...

  • Loss of AP signal strength after upgrading to Clean Air on 5508's.

    After upgrading three 5508's (which support 150 AP's) from WLC/WCS version  6.0.182.0 to version 7.0.98.0, our users complained about low signal strength.  Our pre-upgrade RSSI benchmarks confirmed a decrease of -10dB to -20dB signal strength across all AP's, effectively causing wireless networking to be unusable in key areas.
    After confirming our Global signal strength settings in WCS and WLC's were still at the same settings they were at prior to upgrading, we contacted our VAR for advice.
    He suggested that perhaps the upgrade caused all AP's to run at a lower signal strength.  He was right.
    At his recommendation, we reconfigured the WCS to set two AP's to use Individual mode instead of Global mode.  This is found in Radios/802.11b/g/n/Tx Power Level Assignment.  Setting them to level 2 resulted in an average -15dB increase of RSSI, solving our problems in the test environment.  In one case we saw an increase of -30 dB for one AP.
    The signal strength loss due to the upgrade was not expected, based on the upgrade documentation.  Now we must change the settings manually on the remaining 148 AP's.
    I'd like to hear from anyone else who has experienced a decrease in signal strength after upgrading to Clean Air 7.  If you have information from Cisco that documents this problem, I'd REALLY like to read it.
    Hoping this may help you,
    RS

    Hi Rick,
    this is not "expected" or "on purpose". It just happens that improving the RRM algorithm makes things better for 90% of the people but maybe worse for 10% of the people.
    This is why you can set the Tx power treshold on the RRM or set the overal RRM algorithm sensitivity.
    If you put the Tx power treshold to a louder number (=closer to 0) then the APs will reduce less their power level.
    Hope this helps.
    Nicolas
    ===
    Don't forget to rate answers that you find useful

  • Syncing Reminders on iPad 2 after upgrade to iOS6

    I can't seem to get the reminders on my iPad to sync with my desktop and iPhone after upgrading to iOS6.  I've tried the suggestions on the support community but they do not address the problem.  The iPhone and desktop are synced but the iPad is not.

    Thanks for your reply.  The "No SIM" icon appeared right after I upgraded to iOS7.  I followed the instructions about resetting the iPad, turning airplane mode on and off, resetting the SIM card.  None of this helped, so I went to the Apple store, where they tried all of the above, and even installed a new SIM card. They decided it was a bad SIM card slot.  I contacted the Apple hot line and talked with the for an hour and fifteen minutes.  After resetting the iPad back to its original factory settings and bringing back up, they cam to the same conclusion: bad so card slot. 
    Pardon my cynicism, but it seems strange that so many early iPad and iPhone owners would have the same hard ware problem right after upgrading o iOS7. 
    Does anyone know if Apple is working on a software fix, or is this a plot to get us to buy new iPads?

Maybe you are looking for

  • How to delete records from MTL_SYSTEM_ITEMS table

    Hello Experts, BANNER ======= Oracle8i Enterprise Edition Release 8.1.7.4.0 - Production PL/SQL Release 8.1.7.4.0 - Production CORE     8.1.7.0.0     Production TNS for IBM/AIX RISC System/6000: Version 8.1.7.4.0 - Production NLSRTL Version 3.4.1.0.0

  • "This item is currently being modified. Please try again later."

    I pre-ordered x by Ed Sheeran and it won't let me complete the album with the rest of the songs that were released at midnight.  It gives me the option to buy 6 more songs separately, and I tried buying one and it worked.  The problem is I don't want

  • Extensions option not available in Dreamweaver CC 2014 Windows menu

    This seems pretty low level but it is causing a lot of frustration right now, and combined with other issues is not casting a favourable light on the extensions management workflow. Has the option been removed? Should I have installed it as an extens

  • Average of Averages before aggregation

    HI, I have an issue calculating the averages of a score in the query, we are on BI 7. Here is the example Emp ID............Q1 Score.....Q2 Score..... Average of Q1&Q2 12345............. 66.67 .........100...............83.34 24689............. 66.67

  • Advice needed on specific SIT requirement

    Hi all, there is a specific requirement for an SIT in SSHR. The requirement is: Whenever an employee enters SIT(contains 7 segments) information from SSHR, he should be allowed to enter only 5 segments. When it goes to his supervisor for approval, th