IPhone 4S sound problem please help?!

I have a 4s and updated to ios7 when it came out. Today my phone has no audio apart from ringtone. The volume bar for example is not available in you tube. The buttons when pressed to adjust sound do not show no volume increase or decrease. The speakers work as I can adjust ringtone in settings and can hear it loud and clear. Is this a bug from the update?

Hello Leoner777,
I would be concerned too if the speaker on my iPhone was not working.  I found an article with some steps to take when you are experiencing issues like this:
iPhone: Can't hear through the receiver or speaker
http://support.apple.com/kb/TS1630
Thank you for using Apple Support Communities.
Best,
Sheila M.

Similar Messages

  • IPhone activation lock problem please help

    My friend has bougth an iPhone 5 with iOS 7 through OLX . OLX is a website like craiglist where people buy there products directly to sellers.
    iPhone 5 when he bougth was good and was in working condition. He bougth it yesterday.But suddenly in the nigth he got a maessage that "message from iPhone owner that your iPhone is lost " and the iPhone has been stuck in the activation lock and is asking for the apple id of the consumer and the owner of th phone from whome he has bougth has stopped responding.
    Please help him to get out of this problem .I have bougth ut by paying full price is there any way apple will help me in this issue or is there any way i can activate my iPhone.
    Please help. Thnak you.

    I also bought a used iPhone5 from the market here in Pakistan. The original user hasnt removed the device from his/her iCloud. I had to restore my phone because of some problem and now im stuck at the activation lock. I dont know the iCloud ID of the original user(that could be helpful in order to contact the user) and obviously I dont know the password aswell. So now my $855 worth device is useless. Ive been waiting for three months for some solution but all in vain. APPLE!!! PLEASE help me out here.

  • Sound problem, please help

    Hello,  An year or 2 ago, I bought this HP computer, a DX7200 Slim Tower. Due to it's poor performance, I decided to buy another GPU, an Asus R7240. I installed it, and then noticed the sound was not working anymore. To my understanding, it was because the sound card was no longer detected. Fastforward half an year. I just decided to play my games without sound. I then moved a considerable distance and had my computer shipped over in a truck. While in truck, my computer was probably shaken a bit and the graphics card was no longer properly "plugged" in the slot and thus didn't work. I started my computer without knowing this and then noticed that I could the sound was working. I also noticed a severe issue with my FPS on games so I figured that there must be a problem with the graphics card; I therefore opened my case, put the gpu back how it should be. And then I start my computer and notice that the sound is no longer working.  tl;dr GPU= No soundNo GPU= sound I really want to fix this now, please help me! This is a screenie of what I see wen I click on "playback devices"

    Satellite A105-S4384 
    Try reinstalling this driver.
       Realtek Audio Driver for Windows XP/2000
    -Jerry

  • IPhone 3Gs OS6 problem, please help.

    I woke up this morning and my iPhone screen said OS6 then "connect to iTunes". It had an image of a USB plug with an arrow pointing to an iTunes icon. It won't let me do anything. I am almost annoyed!!!! I did NOT request the update. All APPs were up to date before I went to sleep. I dragged out the computer, plugged in thw phone and WHAT does ITunes say? It tells me that my phone doesn't have the correct version of iTunes. I have no idea what version it has because I can't do anything with it. If I press the button at the bottom of the screen I get 3 options, Emergency call, Start Over, Cancel, none of which are even remotely helpful. Is there a fix?    

    Hi twainy88,
    It sounds like your iPhone may have placed itself in Recovery mode due to an issue with an update. The following article has more information and steps for how to restore from a backup:
    iOS: Unable to update or restore
    http://support.apple.com/kb/ht1808
    Notes:
    In certain situations, an iPhone, iPad, or iPod touch will automatically go into recovery mode after an update or restore issue. If your device is already in recovery mode, you can attempt to restore using iTunes.
    Regards,
    - Brenden

  • IPhone wifi-network problem- Please Help!

    I have a problem with my iPhone4. It could only connect to the internet for a couple of minute then it dropped off. But it is still connect to the wifi though and in my Mac the wifi seem to be working fine. Any ideas?

    first start here
    http://www.apple.com/support/iphone/wifi/
    If that doesn't help then
    Restore as new, if wifi  works add your backup and proceed .If after backup issue returns
    Then you have a corrupt backup
    If when restored as new no wifi then you probably have hardware issue and should take it to an Apple Store genius bar

  • IPhone Application Update Problem -- Please Help

    So I downloaded the application Aurora Feint. Synced it to my iPhone and all was well. Then apparently there was an update. Instead of logging onto iTunes and updating it that way, I decided to try out the Application Store update feature on the iPhone itself. The problem is that the feature won't work for programs later than 10MB. (Aurora Feint is 20+MB.) So now I'm left with an unusable Aurora Feint update icon on my screen that is just taking up space.
    I tried holding down the icons so I could just click the X to get rid of it. Problem is the update icon has no X. Then I tried syncing my phone via iTunes and telling it to remove the AF application. Supposedly it did. But when I disconnected the phone, the AF update icon is still there.
    Can someone please tell me how to get rid of the blood thing?

    If all else fails, first remove the app from iTunes (delete it), then do a restore of the iPhone. It should be gone after the restore.
    Glor

  • IPhone 6 FaceTime problem, please help!

    Phone shows black screen from other person but their back camera works if they switch to it. I'm on iOS 8.1.2. If I FaceTime myself from my iPad it works but everyone else shows a black screen.

    Get help with hardware features on your iPhone, iPad, and iPod touch - Apple Support - look at the section blank/colored screen.
    iOS: Troubleshooting FaceTime - Apple Support

  • Iphone 5 Reboot problem please help?!!

    Last night i turned off my iphone 5 and when i woke up i tried to boot it up. It didn't work. I pressed the home button and power button mutiple times and just right when i got the charger and plug it in the usb without the other end in yet it turned on. Should i be worried?

    Double click the home button and find out what apps are running in the background. Then hold them down until they start to shake and click the minus sign until no apps are actively running. Also, turn push notifications off and see if that changes anything. I hope this helps!

  • IPhone 4S Wifi Problem (Please Help !!)

    The WiFi on my iPhone 4S has been working perfectly fine until today. It is now greyed out and dim as if disabled, so I can't even access it anymore.
    I have tried resetting network settings, toggling cellular data and airplane mode, hard reset, and restoring my phone, but it unfortunately does not do the trick.
    Any help and thoughts would be very appreciated. Thanks!

    tried it mate, now the thing is, my wifi button is not grayed but it can not find the wifi signal ! sometimes it can, and then it looses the signal ! so in my opinion, there should be some solution or patch for it coz if it has a hardware issue then it stays as grayed but now it's not ! so yea waiting to have some solution for it. Thanks though really appreciated !

  • IPhone 4s messaging problem please help!

    something really odd happened to me the past few days, sometimes whenever i get a text message and the phone is on standby (screen on sleep) as soon as i get the text the screen flashes once and only half of the ringtone plays, as soon as i hit the home button the ringtone finishes. is hard to explain but if anything ill try to explain it better if anyone is confused about what im talking about.
    anyone any suggestions????
    also my battery dies really quickly should i return the phone ? or what should i do? help please.
    thank you

    tried it mate, now the thing is, my wifi button is not grayed but it can not find the wifi signal ! sometimes it can, and then it looses the signal ! so in my opinion, there should be some solution or patch for it coz if it has a hardware issue then it stays as grayed but now it's not ! so yea waiting to have some solution for it. Thanks though really appreciated !

  • Flash layer problem and sound problem - PLEASE HELP

    http://www.alamofireworks.com/echo/flash.html
    I am having an issue with the pulldown menu is going behind
    the flash file. I have already tried the param wmode and z-index
    and can't figure it out.
    Also the when you hit stop sound and the video loops the
    sounds comes back and i am not sure how to control.
    Any help would be appreciated.

    http://www.alamofireworks.com/echo/flash.html
    I am having an issue with the pulldown menu is going behind
    the flash file. I have already tried the param wmode and z-index
    and can't figure it out.
    Also the when you hit stop sound and the video loops the
    sounds comes back and i am not sure how to control.
    Any help would be appreciated.

  • Curve 8330 Voice dialing and sound problems, Please help!

    I got this black berry curve 8330 from a friend on the weekend to replace my broken Pearl. He said it worked fine but it sometimes had a voice dialing problem. After wiping all the personal data and activating the phone the voice dialing went nuts. Every 6 to 9 sec the voice dialing would activate with no sound. meaning you don't hear the lady voice say, "say a command". After reading many forums posts I download memmax and removed all VAD files. But I will still left with no sound. I went and did a test on the hardware and the speaker and microphone both worked fine. Puzzled I tried playing a ringtone, , it plays maybe the first second of the file and then the sounds goes away but I am able to get it back by press the Speaker/$ key. I then tried making a phone call and the phone was working just fine. About an hour later I tired calling someone and the issue had raisin again. This time I was unable to get the sound back. (I tried resetting many times with no success.) I could still play media files, but was unable to get sound making or receiving calls (this includes the other party not being able to hear me as well.) I tired changing profiles with no success. I then did some more reading and tried updating the OS. Once that was done and voice dialing had been reinstalled and started acting up again. SO I removed it and basically everything happened all over again. So right now I have a phone that I can’t make calls on but I can still text and use the internet. Does anyone know a solution to this problem? Should I try wiping the OS and reinstall or is this phone toast?

    The msi nforce package 2.29 fixes the NVMCP.SYS error and turns it into a very rare system freeze. 8o
    Very rare!
    been waiting almost 9 months for this fix so i could pull the damm soundblaster out! :O

  • Iphone 4s battery problems PLEASE HELP

    I got my 4s about a week ago. The first couple of days i noticed the battery would go down pretty quick. So i looked online and seen all these different ways to save battery life by switching the settings around. I did all of the recommended changes ( location, brightness, etc.) i had already charged the phone the same way i would charge any phone before i read the full discharge full recharge. I did that two nights in a row and since then i let it get to atleast 2% before i charge it. Last night i put it on the charger around 20% maybe a little more and it definatley overcharged for an hour or two before i took it off. When i go to work i leave it in my locker and go on it during breaks. Normally it would never change the % while on standby and it would go down 1 maybe 2% while i use it. Today by the time it was lunch break it was down to 80%. As i type this my battery is at 64% with 2 hours and 31 minutes usage and 16 hours, 5 minutes of standby.
    What happened to it? It bothers me so much cause i love the phone and it was doing good until today.
    I JUST NOTICED that there is a new software update iOS 5.1.1. Could this sudden battery problem have occured because i am running older software??!!

    You've probabaly just installed and left running more applications. Applications dont entirely close when you hit the home screen. You've probabaly notice when you turn on your phone you have to wait through the loading screen for many applications. After that they sit on the memory of the phone, and the phone uses some battery retaining the state of each application. In Stand-By and still when powered down, your battery will slowly drain (less so when powered down).
    You may want to start force closing apps or occasionally powering down your iPhone. Additionally, the battery is not a NiCad battery where you can't charge it when it's at 80% or you'll risk causing the "battery memory" to max at 80%. The iPhone batteries are fine to be charged when they're at 95%. That said, Apple does recommend dispersing the battery to 0% atleast once a month. These batteries do have a battery charge cycle, ie: after so many charges the drain will begin to occur, but it's alot better than say your R/C car battery, or your typical rechargable triple 'A' battery.
    On another note, I do recommend you run the latest updates, if there ever is a battery issue and they know about it, they'll try to address the issue.

  • IPhone 3G, updating problem - please help!

    i have installed the latest iphone software onto my 3G but when i download apps it says I haven't got the latest iphone software.. what shall i do?!
    Also can I get ios 5?

    The last version of iOS to be supported is 4.2.1. If apps require something higher, you will not be able to use them. The only way around this is to buy a new phone. You can NOT install iOS 5 on an iPhone 3G.

  • Please help iPhone 5 sound problems

    iPhone 5 sound problem: my iPhone 5 noise is only coming out thru the ear speaker and will not come out of any of the other speakers on my phone i say again it will ONLY come out my ear speaker it does it in games and in videos in music in everything! Ive reset the phone and went thru all the settings and everything to try to fix with no luck at all please help me!

    fdisk formated and reinstaled windows 3 times. fresh install each time i installed a sound card. so I dont think lingering drivers is the problem which also means dx9 has been installed fresh each time.also I have been dealing with this for nearly a month and I am at a loss.

Maybe you are looking for

  • HELP! Adobe Muse encountered an unexpected error and will have to be terminated. BD/getColorBoundsRe

    I keep getthing message when my file loads in the program "This document contains 3 links to assets being unsampled. You should resize smaller or right-mouse click on the assets in the Assets panel to see additional options." and then I click okay. I

  • Radeon 9800 AIW pro compatability?

    Anybody know of any compatability issues w/ATI/radeon 9800 AIW pro and 865PE NEO-2 FIS2R mobo's during POST???   See my other thread, I'm having a hell of a time getting my new system to pass  POST and get to bios screen, monitor stays in standby, am

  • Prob in retaining spaces in Combo Box, PLEASE HELP ASAP!!

    Hi In the application that I am working on, I have developed a screen wherein I populate the names of some schemes from the database, in a combo box (<Select><option></option></Select>). A particular scheme in the database has a multiple-word name wi

  • Vendor master user exit for copying  NAME1 - NAME3

    Hi Gurus, I am looking for a user exit in Vendor master for FK01. User enters data in NAME1 and NAME2 field. When the user saves the data, the data from Name1 field should be copied to NAME3 and data from NAME2 field should be copied to NAME4. Please

  • Configuration of redirects from Zend Framework

    Hi, I have to use a PHP project which are develop based on Zend Framework. I use SJWS 7u4 and have to implement mod_rewrite rules form Zend Framework (stndard rules). I have to make rewrite url from http://some-name/some-dir/some-dir2 into http://som