Iphone 4S stuck during restore, waiting for iPhone message error 9

yesterday morning when I woke up to check my Emails on my iphone 4S, my phone was complete dead. I thought battery died so plugged into charger. but even after couple of hours it didnt turned up. So I started force starting by pressing power button several times but nothing happened.
Then I pressed both home and power button for several minutes, nothing.....
Finally I connected my iphone to itunes thru my Mac air and to my surprise it said my phone is in recovery mode and needs to be restored. I pressed ok, it extracted software and then said waiting for iphone. and I was happy to see apple logo on my phone with a progress bar. I waited for almost 12 hrs but nothing moved in the progress bar. seems like it frozen. I tried disconnecting and reconnecting to itunes but everytime same error. whenever i plugeed out my phone from itunes, it errored out no. 9.
Also it is not showing any s/n for my iphone in itunes. I am very confused and frustated, read many forums and also updated my itunes, updated my software and turned on the firewall too. NOTHING HELPED.
Does anyone have any solutions to share?
Thanks

http://support.apple.com/kb/TS3694#securitysoft

Similar Messages

  • Getting "waiting for connection" message in Lightroom 5.5 sync to mobile

    I have tried turning off and on the lightroom mobile sync and signing out and back in. Neither started the sync. What else can I try ?

    mdjcrook,
    I think your sync being stuck and the 'waiting for connection' message were two different issues and would advise you - if you get stuck again - or anyone else reading this thread that is stuck syncing and with the 'waiting for connection' to NOT use 'Delete All Data'
    If you are seeing the 'waiting for connection' message and sync is working, ignore it as that bug just prevents properly showing the sync status but not the actual sync activity.  We are working on trying to figure out why this gets stuck in this state - it appears to be network related - but we haven't found anything definitive yet.
    If you are seeing the 'waiting for connection' message and you sync is stuck then please generate a diagnostic log (Preferences -> Lightroom Mobile -> (Hold Alt/Option key) and click 'Generate Diagnostic Log' and then private message that file to me and we can hopefully determine the real cause of the stuck sync and a workaround that will prevent you having to use the 'Delete All Data' hammer.
    Matt

  • What should I do when my iPhone is in recovery mode, I'm trying to restore, and it's stuck at the "Waiting For iPhone" stage??

    I dropped my iPhone on the ground, and as I went to pick it up, I started to swear under my breath as I realized my iPhone was in recovery mode. I'm like "how would an iPhone be this sensitive -_-," and so as my iPhone's docked unto my laptop, and with relentless attempts to restore my iPhone, I always find iTunes stuck at the "Waiting For iPhone" stage and I honestly have no clue what to do at this point. What should I do to bypass this or fix this problem? Or do I just wait? -_-

    Nothing except that when I turn it on, there's a USB cable and an iTunes logo above it, indicating that it's in recovery mode.

  • My iphone 3g stuck at restoring point and giving an  error 1015

    my iphone 3g stuck at restoring point and giving an  error 1015

    and error code or the exact msg would help

  • My ipod touch wouldn't turn on because I dropped it, so I plugged it into the computer. It went into recovery mode and is now stuck on a waiting for ipod screen. The ipod shows the apple logo and an empty loading bar.

    My ipod touch wouln't turn on because I dropped it, so I plugged it into the computer. It went into recovery mode and is now stuck on a waiting for ipod screen. The ipod shows the apple logo and and an empty loading bar. Please help. Thank you.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • Wait for unread message on broadcast channel during import

    Hi All,
    I am trying to import a dump file on Oracle DB, Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi.
    My import hangs, below is the log.
    Import: Release 10.2.0.3.0 - 64bit Production on Tuesday, 03 April, 2012 21:09:20
    Copyright (c) 2003, 2005, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
    With the Partitioning and Data Mining options
    Master table "CIP_USER_PED1"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
    Starting "CIP_USER_PED1"."SYS_IMPORT_FULL_01": ****@** remap_schema=**** EXCLUDE=STATISTICS
    Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
    Processing object type SCHEMA_EXPORT/TABLE/TABLE
    Processing object type SCHEMA_EXPORT/VIEW/VIEW
    It doesn't proceed further.
    I am not seeing and sessions blocked or locked but I see session waits.
    SESSION_TYPE     STATUS     SECONDS_IN_WAIT     WAIT_CLASS     EVENT
    MASTER     ACTIVE     468     Idle     wait for unread message on broadcast channel
    WORKER     ACTIVE     467     User I/O     direct path read
    select d.session_type, status, seconds_in_wait, wait_class , event from v$session s ,DBA_DATAPUMP_SESSIONS d where username ='CIP_USER_PED1'
    and program like 'orac%'
    and s.saddr = D.SADDR;
    Below is the only message I see in alert log.
    Tue Apr 3 19:15:52 2012
    The value (30) of MAXTRANS parameter ignored.
    kupprdp: master process DM00 started with pid=22, OS id=23456
    to execute - SYS.KUPM$MCP.MAIN('SYS_IMPORT_FULL_01', 'CIP_USER_PED1', 'KUPC$C_1_20120403191552', 'KUPC$S_1_20120403191552', 0);
    kupprdp: worker process DW01 started with worker id=1, pid=23, OS id=23458
    to execute - SYS.KUPW$WORKER.MAIN('SYS_IMPORT_FULL_01', 'CIP_USER_PED1');
    I have googled but haven't been able to resolve the issue.
    Can anyone help me with this ?
    Many Thanks
    Kalai

    km1612 wrote:
    Hi All,
    I am trying to import a dump file on Oracle DB, Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi.
    My import hangs, below is the log.
    Import: Release 10.2.0.3.0 - 64bit Production on Tuesday, 03 April, 2012 21:09:20
    Copyright (c) 2003, 2005, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
    With the Partitioning and Data Mining options
    Master table "CIP_USER_PED1"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
    Starting "CIP_USER_PED1"."SYS_IMPORT_FULL_01": ****@** remap_schema=**** EXCLUDE=STATISTICS
    Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
    Processing object type SCHEMA_EXPORT/TABLE/TABLE
    Processing object type SCHEMA_EXPORT/VIEW/VIEW
    It doesn't proceed further.
    I am not seeing and sessions blocked or locked but I see session waits.
    SESSION_TYPE     STATUS     SECONDS_IN_WAIT     WAIT_CLASS     EVENT
    MASTER     ACTIVE     468     Idle     wait for unread message on broadcast channel
    WORKER     ACTIVE     467     User I/O     direct path read
    select d.session_type, status, seconds_in_wait, wait_class , event from v$session s ,DBA_DATAPUMP_SESSIONS d where username ='CIP_USER_PED1'
    and program like 'orac%'
    and s.saddr = D.SADDR;
    Below is the only message I see in alert log.
    Tue Apr 3 19:15:52 2012
    The value (30) of MAXTRANS parameter ignored.
    kupprdp: master process DM00 started with pid=22, OS id=23456
    to execute - SYS.KUPM$MCP.MAIN('SYS_IMPORT_FULL_01', 'CIP_USER_PED1', 'KUPC$C_1_20120403191552', 'KUPC$S_1_20120403191552', 0);
    kupprdp: worker process DW01 started with worker id=1, pid=23, OS id=23458
    to execute - SYS.KUPW$WORKER.MAIN('SYS_IMPORT_FULL_01', 'CIP_USER_PED1');
    I have googled but haven't been able to resolve the issue.
    Can anyone help me with this ?
    Many Thanks
    Kalaiproper invocation of procedure below will allow you to monitor progress
    by observing contents of resultant trace file
    DBMS_MONITOR.SESSION_TRACE_ENABLE(
        session_id   IN  BINARY_INTEGER DEFAULT NULL,
        serial_num   IN  BINARY_INTEGER DEFAULT NULL,
        waits        IN  BOOLEAN DEFAULT TRUE,
        binds        IN  BOOLEAN DEFAULT FALSE,
        plan_stat    IN  VARCHAR2 DEFAULT NULL);

  • MS2026 -anvna Wait for Acquisition Complete -ERROR

    Hi Everyone,
    I wrote a labview program (LV 7.1) with instrument MS2026A VNA (Anritsu) and it was working fine.
    However the original equipmet stopped working last week and we have received a loaner (until our is fixed), same model, but does not work with my labview program.  I even try running this equipment with the sample program provided by NI:  "anvna Acquire Trace Example" and it gives me an error -please refer to attached pictures.
    The error is in the "anvna Wait for Acquisition Complete.vi."  I think it has to do with timeout (256).  I have added delays all over but nothing helps.  I used to have this same problem on the first instrument but it disappear "mysteriously."
    Could somebody point me to way to fix this issue?   Thanks very much,
    Frank
    Attachments:
    anvna Wait for Acquisition Complete -ERROR.gif ‏10 KB
    anvna Wait for Acquisition Complete.gif ‏26 KB

    Hi Fvalenzu,
    I have a few questions about your application. 
    Is the replacement instrument the same revision of the instrument you sent to get repaired? 
    Is the device at the same address? 
    Are you able to successfully communicate with the instrument in max using GPIB commands?
    You might want to verify the program is calling the instrument by the correct alias or address and you are calling the device correctly.  Also, I would check and see if there is a newer version of the IVI driver for your instrument. IVI drivers can be found at the link below. 
    ni.com/idnet
    Regards
    Message Edited by Andy L on 08-17-2007 06:25 PM
    Andy L.
    Applications Engineer
    National Instruments

  • STREAMS apply coord waiting for slave message?

    1- Oracle version 9.2.0.1
    2-I have 3 database (bd1,bd2 in th same machine, bd3 in an other machine)
    3- I have configured streams in order to have bd1--->bd2 and bd1--->bd3 streams replication
    4- The streams between bd1--->bd2 is ok.
    5-The propagation between bd1--->bbd3 doesn't work.
    6- i have asked yhe view v$session_wait in :
    into bd1 :
    SID SEQ# EVENT
    15 1359 STREAMS apply coord waiting for slave message
    20 622 STREAMS apply slave waiting for coord message
    into bd3 :
    SID SEQ# EVENT
    17 11399 STREAMS apply coord waiting for slave message
    19 5698 STREAMS apply slave waiting for coord message
    What have i to do to fix it and my propagation will work.
    Thank you a lot dear memebers

    The events: STREAMS apply coord waiting for slave message" and "STREAMS apply slave waiting for coord message" are IDLE events - they indicate that the apply process is waiting for work.

  • UWL - Waiting for update message

    Hi,
    Can someone explain me what's the reason that UWL shows a 'Waiting for update' info message on top when opening UWL ? Until we press refresh-button the uwl seems to reload every 15 seconds. If we press Refresh button the 'waiting for update' message disappears ...
    What does the message mean ? For which update is the system waiting ? Why does it show up every time the UWL is called ?
    Regards,
    Igor

    When the UWL first appears it shows any entries in the UWL cache.  The waiting for update appears whilst it is trying to connect and retrieve items from the backend systems.
    As default it should then reload every 5 minutes.. unless someone has changed the configuration on your system.
    Paul

  • Err Session is waiting for a message

    Dear Experts,
    We have got the following error in our System Log.
    ERR: 37225: SAP-Basis System: Session is waiting for a message
    I have checked other logs and could not find the cause for the above error. If you know, please let me know.
    Thanks & Best Regards
    L Raghunahth

    Can you please explain how did you solve this? Im having the same problem

  • IPhone 4 stuck on upgrade "Waiting for iPhone..."

    Hi,
    i am trying to upgrade my iPhone 4, but it stuck on apple Logo with Progressbar, but no response from iPhone while iTunes show "Waiting for iPhone..." contineously.
    guide me how i can fix the problem, i am using iPhone3_1_6.1.3_10B329_Restore.ipsw and my iTunes Version: 11.0.2.26.
    complete updater log is given below:
    2013-04-10 20:03:45.327 [5612:2c8]: restore library built Dec 21 2012 at 16:17:03
    2013-04-10 20:03:45.327 [5612:2c8]: iTunes: iTunes 11.0.2.26
    2013-04-10 20:03:45.328 [5612:2c8]: iTunes: Software payload version: 10B329 (option key)
    2013-04-10 20:04:25.590 [5612:152c]: iTunes: Specifying UOI boot image
    2013-04-10 20:04:25.604 [5612:152c]: device software does not support nonce generation
    2013-04-10 20:04:25.614 [5612:152c]: requested restore behavior: Erase
    2013-04-10 20:04:25.614 [5612:152c]: requested variant: Erase
    2013-04-10 20:04:25.617 [5612:152c]: *** UUID 25C69700-C111-9C44-AFE2-793B8CA91FD8 ***
    2013-04-10 20:04:25.640 [5612:152c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
    2013-04-10 20:04:25.640 [5612:152c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
    2013-04-10 20:04:25.640 [5612:152c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
    2013-04-10 20:04:25.640 [5612:152c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreKernelCache" Digest = "<CFData 0641B718 [73B48078]>{length = 20, capacity = 20, bytes = 0xf9c7660c4c2994b9fd95cd826507cff3cb4f9105}"
    2013-04-10 20:04:25.640 [5612:152c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreRamDisk" Digest = "<CFData 0641B7B8 [73B48078]>{length = 20, capacity = 20, bytes = 0x9a46d40f4b54424c825f6c82670be22b86e03f0a}"
    2013-04-10 20:04:25.640 [5612:152c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBEC" Digest = "<CFData 0641B830 [73B48078]>{length = 20, capacity = 20, bytes = 0xdd4e78d11b416e9f81dc947a3e45125d726229de}"
    2013-04-10 20:04:25.640 [5612:152c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 0641B880 [73B48078]>{length = 20, capacity = 20, bytes = 0x165d7df43bd289b3e13d48f5c1e8b21cf2a0335e}"
    2013-04-10 20:04:25.641 [5612:152c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "KernelCache" Digest = "<CFData 0641AFE8 [73B48078]>{length = 20, capacity = 20, bytes = 0xf9c7660c4c2994b9fd95cd826507cff3cb4f9105}"
    2013-04-10 20:04:25.641 [5612:152c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
    2013-04-10 20:04:25.641 [5612:152c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
    2013-04-10 20:04:25.641 [5612:152c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 0641B218 [73B48078]>{length = 20, capacity = 20, bytes = 0x023683df4637e071c5a733d59cebe67d2fc1bfea}"
    2013-04-10 20:04:25.641 [5612:152c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
    2013-04-10 20:04:25.641 [5612:152c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
    2013-04-10 20:04:25.641 [5612:152c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
    2013-04-10 20:04:25.641 [5612:152c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging"
    2013-04-10 20:04:25.641 [5612:152c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
    2013-04-10 20:04:25.641 [5612:152c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
    2013-04-10 20:04:25.641 [5612:152c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
    2013-04-10 20:04:25.641 [5612:152c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
    2013-04-10 20:04:25.641 [5612:152c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
    2013-04-10 20:04:25.642 [5612:152c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 0641B920 [73B48078]>{length = 20, capacity = 20, bytes = 0x42cc389503004c4f8d52d0c4fb10bba845a9af0e}
    2013-04-10 20:04:25.642 [5612:152c]: amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
    2013-04-10 20:04:26.542 [5612:152c]: amai: tss_submit_job: HttpQueryInfo returned 200
    2013-04-10 20:04:27.162 [5612:152c]: amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
    2013-04-10 20:04:27.411 [5612:152c]: amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "KernelCache" has been previously personalized; skipping it
    2013-04-10 20:04:27.838 [5612:12e4]: device software does not support nonce generation
    2013-04-10 20:04:27.839 [5612:12e4]: <DFU Device 05B6B038>: production fused device
    2013-04-10 20:04:27.839 [5612:12e4]: unable to open device_map.txt: No such file or directory
    2013-04-10 20:04:27.840 [5612:12e4]: device software does not support nonce generation
    2013-04-10 20:04:27.841 [5612:12e4]: WinDFU::OpenDFUDevice: path: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#85fc20a6
    2013-04-10 20:04:27.841 [5612:12e4]: WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#85fc20a6
    2013-04-10 20:04:27.868 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 3
    2013-04-10 20:04:27.908 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 6
    2013-04-10 20:04:27.950 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 9
    2013-04-10 20:04:27.977 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 12
    2013-04-10 20:04:27.995 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 15
    2013-04-10 20:04:28.015 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 18
    2013-04-10 20:04:28.043 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 21
    2013-04-10 20:04:28.060 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 24
    2013-04-10 20:04:28.078 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 27
    2013-04-10 20:04:28.095 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 30
    2013-04-10 20:04:28.111 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 33
    2013-04-10 20:04:28.129 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 36
    2013-04-10 20:04:28.146 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 39
    2013-04-10 20:04:28.164 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 42
    2013-04-10 20:04:28.225 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 45
    2013-04-10 20:04:28.254 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 48
    2013-04-10 20:04:28.270 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 51
    2013-04-10 20:04:28.286 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 54
    2013-04-10 20:04:28.302 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 57
    2013-04-10 20:04:28.318 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 60
    2013-04-10 20:04:28.334 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 63
    2013-04-10 20:04:28.350 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 66
    2013-04-10 20:04:28.366 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 69
    2013-04-10 20:04:28.382 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 72
    2013-04-10 20:04:28.398 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 75
    2013-04-10 20:04:28.414 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 78
    2013-04-10 20:04:28.430 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 81
    2013-04-10 20:04:28.446 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 84
    2013-04-10 20:04:28.462 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 87
    2013-04-10 20:04:28.478 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 90
    2013-04-10 20:04:28.495 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 93
    2013-04-10 20:04:28.513 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 96
    2013-04-10 20:04:28.529 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 99
    2013-04-10 20:04:28.530 [5612:12e4]: WinDFU::UploadData: EOF, cbRead: 489
    2013-04-10 20:04:28.535 [5612:12e4]: <DFU Device 05B6B038>: operation 0 progress 100
    2013-04-10 20:04:28.536 [5612:12e4]: WinDFU::UploadData: ZLP
    2013-04-10 20:04:28.538 [5612:12e4]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
    2013-04-10 20:04:28.539 [5612:12e4]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
    2013-04-10 20:04:28.540 [5612:12e4]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
    2013-04-10 20:04:28.540 [5612:12e4]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
    2013-04-10 20:04:31.540 [5612:12e4]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
    2013-04-10 20:04:31.541 [5612:12e4]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
    2013-04-10 20:04:31.541 [5612:12e4]: WinDFU::ResetDevice: resetting...
    2013-04-10 20:04:31.607 [5612:12e4]: WinDFU::FinalizeDfuUpdate: success
    2013-04-10 20:04:31.607 [5612:12e4]: <DFU Device 05B6B038>: DFU succeeded
    2013-04-10 20:04:31.920 [5612:c1c]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#85fc20a6
    2013-04-10 20:04:31.927 [5612:c1c]: WinAMRestore::ProcessDevNodesChanges: device: 0x05c069c0, notify: 2, connected: 1
    2013-04-10 20:04:31.927 [5612:c1c]: AppleDevice::NotifyDisconnect: DFU \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#85fc20a6, inst: 0x5c069c0
    2013-04-10 20:04:31.929 [5612:c1c]: _AMDFUModeDeviceFinalize: 05B6B038
    2013-04-10 20:04:32.692 [5612:c1c]: WinAMRestore::OnInterfaceArrival: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#b187d9bd
    2013-04-10 20:04:32.692 [5612:c1c]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#b187d9bd
    2013-04-10 20:04:32.721 [5612:c1c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2013-04-10 20:04:32.744 [5612:c1c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2013-04-10 20:04:32.766 [5612:c1c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2013-04-10 20:04:32.775 [5612:c1c]: AppleDevice::SetNotification: CONNECT, interface type: 1, id: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#b187d9bd, inst: 0x5a4e728
    2013-04-10 20:04:32.775 [5612:c1c]: WinAMRestore::AddAppleDeviceToDeviceList, new device
    2013-04-10 20:04:32.775 [5612:c1c]: WinAMRestore::ProcessDevNodesChanges: device: 0x05c069c0, notify: 0, connected: 0
    2013-04-10 20:04:32.775 [5612:c1c]: WinAMRestore::ProcessDevNodesChanges: device: 0x05a4e728, notify: 1, connected: 0
    2013-04-10 20:04:32.775 [5612:c1c]: AppleDevice::NotifyConnect: Device type: 1, Interfaces total: 1, arrived: 1
    2013-04-10 20:04:32.775 [5612:c1c]: AppleDevice::NotifyConnect: DFU \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#b187d9bd, inst: 0x5a4e728
    2013-04-10 20:04:32.795 [5612:2c8]: AppleDevice::GetDeviceID: failed for iBoot
    2013-04-10 20:04:32.796 [5612:2c8]: AppleDevice::GetDeviceID: failed for iBoot
    2013-04-10 20:04:32.797 [5612:2c8]: AppleDevice::GetDeviceID: failed for iBoot
    2013-04-10 20:04:32.798 [5612:2c8]: iTunes: SCEP 2
    2013-04-10 20:04:32.844 [5612:92c]: AppleDevice::GetDeviceID: failed for iBoot
    2013-04-10 20:04:32.845 [5612:92c]: <DFU Device 05A507B0>: operation 44 progress -1
    2013-04-10 20:04:32.846 [5612:92c]: requested restore behavior: Erase
    2013-04-10 20:04:32.846 [5612:92c]: requested variant: Erase
    2013-04-10 20:04:32.862 [5612:92c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is True
    2013-04-10 20:04:32.862 [5612:92c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreLogo" Digest = "<CFData 0641C118 [73B48078]>{length = 20, capacity = 20, bytes = 0x91024670dc5047de33036c446b5ef53cc22db756}"
    2013-04-10 20:04:32.862 [5612:92c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreDeviceTree" Digest = "<CFData 0641C078 [73B48078]>{length = 20, capacity = 20, bytes = 0xec0295f90e86975ec27258b69b4fdd995fa9b307}"
    2013-04-10 20:04:32.862 [5612:92c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreKernelCache" Digest = "<CFData 0641C0A0 [73B48078]>{length = 20, capacity = 20, bytes = 0xf9c7660c4c2994b9fd95cd826507cff3cb4f9105}"
    2013-04-10 20:04:32.862 [5612:92c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreRamDisk" Digest = "<CFData 0641C140 [73B48078]>{length = 20, capacity = 20, bytes = 0x9a46d40f4b54424c825f6c82670be22b86e03f0a}"
    2013-04-10 20:04:32.862 [5612:92c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBEC" Digest = "<CFData 0641C1B8 [73B48078]>{length = 20, capacity = 20, bytes = 0xdd4e78d11b416e9f81dc947a3e45125d726229de}"
    2013-04-10 20:04:32.862 [5612:92c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 0641C208 [73B48078]>{length = 20, capacity = 20, bytes = 0x165d7df43bd289b3e13d48f5c1e8b21cf2a0335e}"
    2013-04-10 20:04:32.862 [5612:92c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "KernelCache" Digest = "<CFData 0641BF60 [73B48078]>{length = 20, capacity = 20, bytes = 0xf9c7660c4c2994b9fd95cd826507cff3cb4f9105}"
    2013-04-10 20:04:32.862 [5612:92c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow1" Digest = "<CFData 0641BBA0 [73B48078]>{length = 20, capacity = 20, bytes = 0x7c5b9e305d6713ca95a0bf52cfa9d74a76632165}"
    2013-04-10 20:04:32.863 [5612:92c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow0" Digest = "<CFData 0641BE48 [73B48078]>{length = 20, capacity = 20, bytes = 0x970dc6e48a164ce0c2fe50604fbc04ba00084b5b}"
    2013-04-10 20:04:32.863 [5612:92c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 0641BEE8 [73B48078]>{length = 20, capacity = 20, bytes = 0x023683df4637e071c5a733d59cebe67d2fc1bfea}"
    2013-04-10 20:04:32.863 [5612:92c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBoot" Digest = "<CFData 0641C258 [73B48078]>{length = 20, capacity = 20, bytes = 0x4de4c1c53f24322a593c4e0819486491ccad687d}"
    2013-04-10 20:04:32.863 [5612:92c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "DeviceTree" Digest = "<CFData 0641BCE0 [73B48078]>{length = 20, capacity = 20, bytes = 0xec0295f90e86975ec27258b69b4fdd995fa9b307}"
    2013-04-10 20:04:32.863 [5612:92c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging1" Digest = "<CFData 0641BA60 [73B48078]>{length = 20, capacity = 20, bytes = 0xcc090e191df8c84c0190fc19d831b272ff8289a3}"
    2013-04-10 20:04:32.863 [5612:92c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging" Digest = "<CFData 0641B9E8 [73B48078]>{length = 20, capacity = 20, bytes = 0x95bad50919c4e28a2cde4b0d62a4a4044e044e6e}"
    2013-04-10 20:04:32.863 [5612:92c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "AppleLogo" Digest = "<CFData 0641B538 [73B48078]>{length = 20, capacity = 20, bytes = 0x91024670dc5047de33036c446b5ef53cc22db756}"
    2013-04-10 20:04:32.863 [5612:92c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryPlugin" Digest = "<CFData 0641B998 [73B48078]>{length = 20, capacity = 20, bytes = 0x9af17593f66dc089400eeb384c7294baadad60b6}"
    2013-04-10 20:04:32.863 [5612:92c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryFull" Digest = "<CFData 0641BAB0 [73B48078]>{length = 20, capacity = 20, bytes = 0x70b6a985e9999f7ebba8fe057883e71e46a11827}"
    2013-04-10 20:04:32.863 [5612:92c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging0" Digest = "<CFData 0641BA10 [73B48078]>{length = 20, capacity = 20, bytes = 0x0c65d77dce3418d0b9267136b8c9933bffda4cd7}"
    2013-04-10 20:04:32.863 [5612:92c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RecoveryMode" Digest = "<CFData 0641C028 [73B48078]>{length = 20, capacity = 20, bytes = 0x9172551efd8c236e1f3c042aee9ddcd4716cdf4d}"
    2013-04-10 20:04:32.863 [5612:92c]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 0641C2A8 [73B48078]>{length = 20, capacity = 20, bytes = 0x42cc389503004c4f8d52d0c4fb10bba845a9af0e}
    2013-04-10 20:04:32.864 [5612:92c]: amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
    2013-04-10 20:04:33.536 [5612:92c]: amai: tss_submit_job: HttpQueryInfo returned 200
    2013-04-10 20:04:34.057 [5612:92c]: amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
    2013-04-10 20:04:34.065 [5612:92c]: amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "RestoreKernelCache" has been previously personalized; skipping it
    2013-04-10 20:04:34.065 [5612:92c]: amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "RestoreRamDisk" has been previously personalized; skipping it
    2013-04-10 20:04:34.065 [5612:92c]: amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "iBEC" has been previously personalized; skipping it
    2013-04-10 20:04:34.065 [5612:92c]: amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "iBSS" has been previously personalized; skipping it
    2013-04-10 20:04:34.065 [5612:92c]: amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "KernelCache" has been previously personalized; skipping it
    2013-04-10 20:04:34.066 [5612:92c]: amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "LLB" has been previously personalized; skipping it
    2013-04-10 20:04:34.074 [5612:92c]: AppleDevice::GetDeviceID: failed for iBoot
    2013-04-10 20:04:34.075 [5612:92c]: <DFU Device 05A507B0>: production fused device
    2013-04-10 20:04:34.076 [5612:92c]: unable to open device_map.txt: No such file or directory
    2013-04-10 20:04:34.076 [5612:92c]: AppleDevice::GetDeviceID: failed for iBoot
    2013-04-10 20:04:34.080 [5612:92c]: WinDFU::OpenDFUDevice: path: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#b187d9bd
    2013-04-10 20:04:34.080 [5612:92c]: WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#b187d9bd
    2013-04-10 20:04:34.091 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 0
    2013-04-10 20:04:34.101 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 1
    2013-04-10 20:04:34.111 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 2
    2013-04-10 20:04:34.131 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 3
    2013-04-10 20:04:34.141 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 4
    2013-04-10 20:04:34.151 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 5
    2013-04-10 20:04:34.171 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 6
    2013-04-10 20:04:34.181 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 7
    2013-04-10 20:04:34.201 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 8
    2013-04-10 20:04:34.211 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 9
    2013-04-10 20:04:34.221 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 10
    2013-04-10 20:04:34.241 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 11
    2013-04-10 20:04:34.251 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 12
    2013-04-10 20:04:34.271 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 13
    2013-04-10 20:04:34.281 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 14
    2013-04-10 20:04:34.291 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 15
    2013-04-10 20:04:34.311 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 16
    2013-04-10 20:04:34.321 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 17
    2013-04-10 20:04:34.331 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 18
    2013-04-10 20:04:34.351 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 19
    2013-04-10 20:04:34.361 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 20
    2013-04-10 20:04:34.381 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 21
    2013-04-10 20:04:34.391 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 22
    2013-04-10 20:04:34.401 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 23
    2013-04-10 20:04:34.421 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 24
    2013-04-10 20:04:34.431 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 25
    2013-04-10 20:04:34.451 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 26
    2013-04-10 20:04:34.461 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 27
    2013-04-10 20:04:34.471 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 28
    2013-04-10 20:04:34.491 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 29
    2013-04-10 20:04:34.501 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 30
    2013-04-10 20:04:34.511 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 31
    2013-04-10 20:04:34.531 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 32
    2013-04-10 20:04:34.541 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 33
    2013-04-10 20:04:34.561 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 34
    2013-04-10 20:04:34.571 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 35
    2013-04-10 20:04:34.581 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 36
    2013-04-10 20:04:34.601 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 37
    2013-04-10 20:04:34.611 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 38
    2013-04-10 20:04:34.631 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 39
    2013-04-10 20:04:34.641 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 40
    2013-04-10 20:04:34.651 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 41
    2013-04-10 20:04:34.671 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 42
    2013-04-10 20:04:34.681 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 43
    2013-04-10 20:04:34.691 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 44
    2013-04-10 20:04:34.711 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 45
    2013-04-10 20:04:34.721 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 46
    2013-04-10 20:04:34.741 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 47
    2013-04-10 20:04:34.751 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 48
    2013-04-10 20:04:34.761 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 49
    2013-04-10 20:04:34.781 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 50
    2013-04-10 20:04:34.791 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 51
    2013-04-10 20:04:34.811 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 52
    2013-04-10 20:04:34.821 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 53
    2013-04-10 20:04:34.831 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 54
    2013-04-10 20:04:34.851 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 55
    2013-04-10 20:04:34.861 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 56
    2013-04-10 20:04:34.881 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 57
    2013-04-10 20:04:34.891 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 58
    2013-04-10 20:04:34.901 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 59
    2013-04-10 20:04:34.921 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 60
    2013-04-10 20:04:34.931 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 61
    2013-04-10 20:04:34.941 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 62
    2013-04-10 20:04:34.961 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 63
    2013-04-10 20:04:34.971 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 64
    2013-04-10 20:04:34.991 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 65
    2013-04-10 20:04:35.001 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 66
    2013-04-10 20:04:35.011 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 67
    2013-04-10 20:04:35.031 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 68
    2013-04-10 20:04:35.041 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 69
    2013-04-10 20:04:35.061 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 70
    2013-04-10 20:04:35.071 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 71
    2013-04-10 20:04:35.081 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 72
    2013-04-10 20:04:35.101 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 73
    2013-04-10 20:04:35.111 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 74
    2013-04-10 20:04:35.121 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 75
    2013-04-10 20:04:35.141 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 76
    2013-04-10 20:04:35.151 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 77
    2013-04-10 20:04:35.171 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 78
    2013-04-10 20:04:35.181 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 79
    2013-04-10 20:04:35.191 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 80
    2013-04-10 20:04:35.211 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 81
    2013-04-10 20:04:35.221 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 82
    2013-04-10 20:04:35.241 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 83
    2013-04-10 20:04:35.251 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 84
    2013-04-10 20:04:35.261 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 85
    2013-04-10 20:04:35.281 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 86
    2013-04-10 20:04:35.291 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 87
    2013-04-10 20:04:35.301 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 88
    2013-04-10 20:04:35.321 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 89
    2013-04-10 20:04:35.331 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 90
    2013-04-10 20:04:35.351 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 91
    2013-04-10 20:04:35.361 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 92
    2013-04-10 20:04:35.371 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 93
    2013-04-10 20:04:35.391 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 94
    2013-04-10 20:04:35.401 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 95
    2013-04-10 20:04:35.421 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 96
    2013-04-10 20:04:35.431 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 97
    2013-04-10 20:04:35.441 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 98
    2013-04-10 20:04:35.461 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 99
    2013-04-10 20:04:35.461 [5612:92c]: WinDFU::UploadData: EOF, cbRead: 1257
    2013-04-10 20:04:35.468 [5612:92c]: <DFU Device 05A507B0>: operation 0 progress 100
    2013-04-10 20:04:35.468 [5612:92c]: WinDFU::UploadData: ZLP
    2013-04-10 20:04:35.470 [5612:92c]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
    2013-04-10 20:04:35.470 [5612:92c]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
    2013-04-10 20:04:35.471 [5612:92c]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
    2013-04-10 20:04:35.471 [5612:92c]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
    2013-04-10 20:04:38.471 [5612:92c]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
    2013-04-10 20:04:38.471 [5612:92c]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
    2013-04-10 20:04:38.471 [5612:92c]: WinDFU::ResetDevice: resetting...
    2013-04-10 20:04:38.537 [5612:92c]: WinDFU::FinalizeDfuUpdate: success
    2013-04-10 20:04:38.537 [5612:92c]: <DFU Device 05A507B0>: DFU succeeded
    2013-04-10 20:04:38.581 [5612:c1c]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#b187d9bd
    2013-04-10 20:04:38.582 [5612:c1c]: WinAMRestore::ProcessDevNodesChanges: device: 0x05c069c0, notify: 2, connected: 0
    2013-04-10 20:04:38.582 [5612:c1c]: WinAMRestore::ProcessDevNodesChanges: device: 0x05a4e728, notify: 2, connected: 1
    2013-04-10 20:04:38.582 [5612:c1c]: AppleDevice::NotifyDisconnect: DFU \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#b187d9bd, inst: 0x5a4e728
    2013-04-10 20:04:38.693 [5612:2c8]: _AMDFUModeDeviceFinalize: 05A507B0
    2013-04-10 20:04:41.936 [5612:c1c]: WinAMRestore::OnInterfaceArrival: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#b187d9b d
    2013-04-10 20:04:41.936 [5612:c1c]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#b187d9b d
    2013-04-10 20:04:41.961 [5612:c1c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2013-04-10 20:04:41.983 [5612:c1c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2013-04-10 20:04:42.005 [5612:c1c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2013-04-10 20:04:42.012 [5612:c1c]: AppleDevice::SetNotification: CONNECT, interface type: 1, id: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#b187d9b d, inst: 0x5a4ec28
    2013-04-10 20:04:42.012 [5612:c1c]: WinAMRestore::AddAppleDeviceToDeviceList, new device
    2013-04-10 20:04:42.012 [5612:c1c]: WinAMRestore::ProcessDevNodesChanges: device: 0x05c069c0, notify: 2, connected: 0
    2013-04-10 20:04:42.012 [5612:c1c]: WinAMRestore::ProcessDevNodesChanges: device: 0x05a4e728, notify: 0, connected: 0
    2013-04-10 20:04:42.012 [5612:c1c]: WinAMRestore::ProcessDevNodesChanges: device: 0x05a4ec28, notify: 1, connected: 0
    2013-04-10 20:04:42.012 [5612:c1c]: AppleDevice::NotifyConnect: Device type: 2, Interfaces total: 2, arrived: 1
    2013-04-10 20:04:42.012 [5612:c1c]: AppleDevice::NotifyConnect: Interfaces total != arrived, no notification
    2013-04-10 20:04:42.114 [5612:c1c]: WinAMRestore::OnInterfaceArrival: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#b187d9bd
    2013-04-10 20:04:42.115 [5612:c1c]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#b187d9bd
    2013-04-10 20:04:42.139 [5612:c1c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2013-04-10 20:04:42.161 [5612:c1c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2013-04-10 20:04:42.184 [5612:c1c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2013-04-10 20:04:42.191 [5612:c1c]: WinAMRestore::AddAppleDeviceToDeviceList, device already connected, new interface
    2013-04-10 20:04:42.191 [5612:c1c]: AppleDevice::SetDeviceID: AMD_INTERFACE_DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#b187d9bd, inst: 0x5a4ec28
    2013-04-10 20:04:42.191 [5612:c1c]: AppleDevice::SetNotification: CONNECT, interface type: 1, id: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#b187d9bd, inst: 0x5a4ec28
    2013-04-10 20:04:42.191 [5612:c1c]: WinAMRestore::ProcessDevNodesChanges: device: 0x05c069c0, notify: 2, connected: 0
    2013-04-10 20:04:42.191 [5612:c1c]: WinAMRestore::ProcessDevNodesChanges: device: 0x05a4e728, notify: 0, connected: 0
    2013-04-10 20:04:42.191 [5612:c1c]: WinAMRestore::ProcessDevNodesChanges: device: 0x05a4ec28, notify: 1, connected: 1
    2013-04-10 20:04:42.191 [5612:c1c]: AppleDevice::NotifyConnect: Device type: 2, Interfaces total: 2, arrived: 2
    2013-04-10 20:04:42.191 [5612:c1c]: AppleDevice::NotifyConnect: IBOOT, IBOOT \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#b187d9b d, inst: 0x5a4ec28
    2013-04-10 20:04:42.191 [5612:c1c]:                             IBOOT, DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#b187d9bd, inst: 0x5a4ec28
    2013-04-10 20:04:42.203 [5612:2c8]: iTunes: SCEP 2
    2013-04-10 20:04:42.205 [5612:16f0]: iBoot build-version = iBoot-1537.9.55
    2013-04-10 20:04:42.206 [5612:16f0]: iBoot build-style = RELEASE
    2013-04-10 20:04:42.206 [5612:16f0]: <Recovery Mode Device 00946370>: operation 44 progress -1
    2013-04-10 20:04:42.206 [5612:16f0]: requested restore behavior: Erase
    2013-04-10 20:04:42.206 [5612:16f0]: requested variant: Erase
    2013-04-10 20:04:42.210 [5612:16f0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
    2013-04-10 20:04:42.210 [5612:16f0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
    2013-04-10 20:04:42.210 [5612:16f0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
    2013-04-10 20:04:42.210 [5612:16f0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreKernelCache" has been previously personalized; skipping it
    2013-04-10 20:04:42.211 [5612:16f0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreRamDisk" has been previously personalized; skipping it
    2013-04-10 20:04:42.211 [5612:16f0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBEC" has been previously personalized; skipping it
    2013-04-10 20:04:42.211 [5612:16f0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
    2013-04-10 20:04:42.211 [5612:16f0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "KernelCache" has been previously personalized; skipping it
    2013-04-10 20:04:42.211 [5612:16f0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
    2013-04-10 20:04:42.211 [5612:16f0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
    2013-04-10 20:04:42.211 [5612:16f0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
    2013-04-10 20:04:42.211 [5612:16f0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
    2013-04-10 20:04:42.211 [5612:16f0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
    2013-04-10 20:04:42.211 [5612:16f0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
    2013-04-10 20:04:42.211 [5612:16f0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging"
    2013-04-10 20:04:42.211 [5612:16f0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
    2013-04-10 20:04:42.211 [5612:16f0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
    2013-04-10 20:04:42.211 [5612:16f0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
    2013-04-10 20:04:42.211 [5612:16f0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
    2013-04-10 20:04:42.211 [5612:16f0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
    2013-04-10 20:04:42.211 [5612:16f0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
    2013-04-10 20:04:42.213 [5612:16f0]: unable to open device_map.txt: No such file or directory
    2013-04-10 20:04:42.214 [5612:16f0]: found device map entry for 0x00008930 0x00000000. boardConfig=n90ap platform=s5l8930x
    2013-04-10 20:04:42.215 [5612:16f0]: _AMRestoreCreateCFDataWithContentsOfFile: CreateFileA failed: 2
    2013-04-10 20:04:42.215 [5612:16f0]: unable to create data from file: 17
    2013-04-10 20:04:42.215 [5612:16f0]: device_map.plist file not found
    2013-04-10 20:04:42.215 [5612:16f0]: AMDeviceIoControl: GetOverlappedResult failed
    2013-04-10 20:04:42.215 [5612:16f0]: AMDeviceIoControl: pipe stall
    2013-04-10 20:04:42.216 [5612:16f0]: USBControlTransfer: error 31, usbd status c0000004
    2013-04-10 20:04:42.216 [5612:16f0]: command device request for 'getenv radio-error' failed: 2008
    2013-04-10 20:04:42.216 [5612:16f0]: radio-error not set
    2013-04-10 20:04:42.216 [5612:16f0]: unable to open device_map.txt: No such file or directory
    2013-04-10 20:04:42.217 [5612:16f0]: <Recovery Mode Device 00946370>: production fused device
    2013-04-10 20:04:42.218 [5612:16f0]: interface has 1 endpoints, file pipe = 1
    2013-04-10 20:04:42.218 [5612:16f0]: <Recovery Mode Device 00946370>: operation 4 progress -1
    2013-04-10 20:04:42.226 [5612:16f0]: <Recovery Mode Device 00946370>: operation 42 progress -1
    2013-04-10 20:04:43.261 [5612:16f0]: <Recovery Mode Device 00946370>: operation 5 progress -1
    2013-04-10 20:04:43.630 [5612:16f0]: unable to open device_map.txt: No such file or directory
    2013-04-10 20:04:43.631 [5612:16f0]: found device map entry for 0x00008930 0x00000000. boardConfig=n90ap platform=s5l8930x
    2013-04-10 20:04:43.631 [5612:16f0]: _AMRestoreCreateCFDataWithContentsOfFile: CreateFileA failed: 2
    2013-04-10 20:04:43.632 [5612:16f0]: unable to create data from file: 17
    2013-04-10 20:04:43.632 [5612:16f0]: device_map.plist file not found
    2013-04-10 20:04:43.632 [5612:16f0]: AMDeviceIoControl: GetOverlappedResult failed
    2013-04-10 20:04:43.632 [5612:16f0]: AMDeviceIoControl: pipe stall
    2013-04-10 20:04:43.632 [5612:16f0]: USBControlTransfer: error 31, usbd status c0000004
    2013-04-10 20:04:43.632 [5612:16f0]: command device request for 'getenv ramdisk-delay' failed: 2008
    2013-04-10 20:04:45.668 [5612:16f0]: <Recovery Mode Device 00946370>: operation 6 progress -1
    2013-04-10 20:04:46.679 [5612:16f0]: <Recovery Mode Device 00946370>: operation 7 progress -1
    2013-04-10 20:04:46.955 [5612:16f0]: <Recovery Mode Device 00946370>: operation 8 progress -1
    2013-04-10 20:04:46.956 [5612:16f0]: unable to open device_map.txt: No such file or directory
    2013-04-10 20:04:46.957 [5612:16f0]: found device map entry for 0x00008930 0x00000000. boardConfig=n90ap platform=s5l8930x
    2013-04-10 20:04:46.957 [5612:16f0]: _AMRestoreCreateCFDataWithContentsOfFile: CreateFileA failed: 2
    2013-04-10 20:04:46.957 [5612:16f0]: unable to create data from file: 17
    2013-04-10 20:04:46.957 [5612:16f0]: device_map.plist file not found
    2013-04-10 20:04:46.958 [5612:16f0]: <Recovery Mode Device 00946370>: operation 9 progress -1
    2013-04-10 20:04:46.958 [5612:16f0]: <Recovery Mode Device 00946370>: Recovery mode succeeded
    2013-04-10 20:04:49.068 [5612:c1c]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#b187d9b d
    2013-04-10 20:04:49.070 [5612:c1c]: WinAMRestore::ProcessDevNodesChanges: device: 0x05c069c0, notify: 2, connected: 0
    2013-04-10 20:04:49.070 [5612:c1c]: WinAMRestore::ProcessDevNodesChanges: device: 0x05a4e728, notify: 2, connected: 0
    2013-04-10 20:04:49.070 [5612:c1c]: WinAMRestore::ProcessDevNodesChanges: device: 0x05a4ec28, notify: 2, connected: 1
    2013-04-10 20:04:49.070 [5612:c1c]: AppleDevice::NotifyDisconnect: IBOOT, IBOOT \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#b187d9b d, inst: 0x5a4ec28
    2013-04-10 20:04:49.070 [5612:c1c]:                                IBOOT, DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#b187d9bd, inst: 0x5a4ec28
    2013-04-10 20:04:49.071 [5612:c1c]: _AMRecoveryModeDeviceFinalize: 00946370
    2013-04-10 20:04:49.113 [5612:c1c]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#b187d9bd
    2013-04-10 20:04:49.114 [5612:c1c]: WinAMRestore::ProcessDevNodesChanges: device: 0x05c069c0, notify: 2, connected: 0
    2013-04-10 20:04:49.114 [5612:c1c]: WinAMRestore::ProcessDevNodesChanges: device: 0x05a4e728, notify: 2, connected: 0
    2013-04-10 20:04:49.114 [5612:c1c]: WinAMRestore::ProcessDevNodesChanges: device: 0x05a4ec28, notify: 2, connected: 0
    2013-04-10 20:04:53.659 [5612:3a4]: received kAMDeviceAttached action, device id CDF8C5CBA494A145 (05B0EB48), AFC error 0XE8000028
    2013-04-10 20:04:53.659 [5612:3a4]: iTunes: Restore-mode device appeared, device 05B0EB48
    2013-04-10 20:04:53.659 [5612:3a4]: iTunes: Creating restore mode device with usbMuxDeviceID 0X1
    2013-04-10 20:04:53.659 [5612:3a4]: <Restore Device 05B0EBB0>: operation 3 progress -1
    2013-04-10 20:04:53.663 [5612:3a4]: <Restore Device 05B0EBB0>: operation 4 progress -1
    2013-04-10 20:04:53.666 [5612:3a4]: Supports value queries: 1
    2013-04-10 20:04:53.749 [5612:16c0]: amai: AMAuthInstallBasebandPersonalizationRequired: failed to get fusing status
    2013-04-10 20:04:53.749 [5612:16c0]: requested restore behavior: Erase
    2013-04-10 20:04:53.769 [5612:16c0]: Getting baseband firmware from variant: Erase
    2013-04-10 20:04:53.769 [5612:16c0]: _AMRestoreModeDeviceConfigureAuthInstall: setting customBbfwPath
    2013-04-10 20:04:53.770 [5612:16c0]: <Restore Device 05B0EBB0>: operation 44 progress -1
    2013-04-10 20:04:53.770 [5612:16c0]: requested restore behavior: Erase
    2013-04-10 20:04:53.770 [5612:16c0]: requested variant: Erase
    2013-04-10 20:04:53.770 [5612:16c0]: custom baseband firmware specified
    2013-04-10 20:04:53.770 [5612:16c0]: amai: AMAuthInstallBundleOverrideEntry: overriding entry: BasebandFirmware
    2013-04-10 20:04:53.772 [5612:16c0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
    2013-04-10 20:04:53.772 [5612:16c0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
    2013-04-10 20:04:53.772 [5612:16c0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
    2013-04-10 20:04:53.772 [5612:16c0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreKernelCache" has been previously personalized; skipping it
    2013-04-10 20:04:53.772 [5612:16c0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreRamDisk" has been previously personalized; skipping it
    2013-04-10 20:04:53.772 [5612:16c0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBEC" has been previously personalized; skipping it
    2013-04-10 20:04:53.772 [5612:16c0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
    2013-04-10 20:04:53.773 [5612:16c0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "KernelCache" has been previously personalized; skipping it
    2013-04-10 20:04:53.773 [5612:16c0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
    2013-04-10 20:04:53.773 [5612:16c0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
    2013-04-10 20:04:53.773 [5612:16c0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
    2013-04-10 20:04:53.773 [5612:16c0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
    2013-04-10 20:04:53.773 [5612:16c0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
    2013-04-10 20:04:53.773 [5612:16c0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
    2013-04-10 20:04:53.773 [5612:16c0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging"
    2013-04-10 20:04:53.773 [5612:16c0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
    2013-04-10 20:04:53.773 [5612:16c0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
    2013-04-10 20:04:53.773 [5612:16c0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
    2013-04-10 20:04:53.773 [5612:16c0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
    2013-04-10 20:04:53.773 [5612:16c0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
    2013-04-10 20:04:53.773 [5612:16c0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
    2013-04-10 20:04:53.774 [5612:16c0]: fixed TcpWindowSize (64380) can cause restore failure if too large
    2013-04-10 20:04:53.780 [5612:16c0]: device did not return saved USB log
    2013-04-10 20:04:53.780 [5612:16c0]: device did not return saved panic log
    2013-04-10 20:04:53.786 [5612:16c0]: connected to service com.apple.mobile.restored
    2013-04-10 20:04:53.786 [5612:16c0]: using protocol version 12
    2013-04-10 20:04:53.794 [5612:16c0]: unable to open device_map.txt: No such file or directory
    2013-04-10 20:04:53.794 [5612:16c0]: board config = n90ap
    2013-04-10 20:04:53.800 [5612:16c0]: no value returned for BootArgs
    2013-04-10 20:04:53.800 [5612:16c0]: _copyDeviceProperty() failed for restore bootargs
    2013-04-10 20:04:53.807 [5612:16c0]: no value returned for MarketingPartNumber
    2013-04-10 20:04:53.807 [5612:16c0]: _copyDeviceProperty() failed for mpn
    2013-04-10 20:04:53.813 [5612:16c0]: value query for 'HardwareModel' returned 'N90AP'
    2013-04-10 20:04:53.828 [5612:16c0]: <Restore Device 05B0EBB0>: operation 28 progress -1

    See this:
    iOS: Unable to update or restore
    If the steps in the article don't help, this phone either has hardware damage or was previosly hacked/jailbroken and is DOA. 

  • "Waiting for IPad" message & seems stuck during update.

    Hi. I am in the process of updating my IPad from software version 3.2.2 to the current version.  My computer took over an hour to download the update and now has been stuck for hours saying it's "waiting for IPad" and that ITunes is updating the software.  The IPad has the Apple icon and a download bar which has not progressed at all.  I am concerned the upgrade has got stuck and I don't know what to do next.  Any ideas of what to do will be gratefully appreciated please.

    Hi.  Thanks for your suggestion.  I have tried it but it hasn't worked.  It realises it's in recovery mode but when I go to restore it, it goes back to the original problem.

  • [SOLVED] Random kernel panics during boot (Waiting for UDev uevents..)

    Update 2012-03-31: Workaround confirmed to work, see tenthirteen's post.
    Update 2012-02-03: I've narrowed down the problem to the 3.x kernels. Downgrading to kernel26-2.6.38.5-1, with the other packages up-to-date (using nouveau instead of nvidia driver), solves the problem. Still, I still consider this a problem since it forces me to use an older kernel, so if anyone has any idea how to find the problem I would be very thankful!
    When I came back home after the summer vacations I did a huge upgrade with pacman -Syu (of course I read the announcements before). This included linux (3.0.3-1) from kernel26 (2.6.38.5-1) and udev (167-2 -> 173-3). After this point, the boot process randomly fails from time to time; today I had to restart more than 20 times before my machine would boot successfully.
    It always occurs during "Waiting for UDev uvents to be processed". Some of the errors are:
    1. The computer freezes when the message is shown (cursor stops to blink).
    2. Nothing happens for a long time, then Waiting for UDev uvents to be processed [ FAIL ]s.
    3. Short and long error messages that look similar to this guy's (except for the last line).
    I greped for some of the error messages in /var/log but they don't seem to be logged, so the examples below are from my handwritten notes and thus not very complete (there are a lot of other error messages except these lines). It's also possible that there are some mistakes. Note that they're from different boots.
    BUG: Soft lockup - CPU#1 stuck for 23 s! [modprobe:256]
    BUG: Unable to handle kernel
    --[End ...]--
    note: udevd[225] exited with preempt_count 2
    Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: c0147299
    BUG: Unable to handle kernel paging request at f8d20076
    Code: Bad EIP value.
    EIP: ...
    CRZ: ...
    --[End ...]--
    Kernel panic - not syncing: Attempted to kill the idle task!
    Lock: Bad EIP value
    Note: modprobe [296] exited with preempt_count 3
    WARNING: at kernel/watchdog.c:240 watchdog-overflow-callback+0xac/...
    BUG: Unable to handle kernel NULL pointer dereference at 00000286
    BUG: Unable to handle kernel NULL pointer dereference at (null)
    These errors are seemingly arbitrary which makes it very hard to find the problem. Sometimes it works without a single complaint, sometimes it says something about "No caching mode page present, Assuming drive cache: write through", and sometimes I get different errors (the examples above are only from today!). As you can imagine, it gets pretty annoying.
    So far I've tried to:
    * Use the fallback mode - nope.
    * Rerun mkinitcpio -p linux - nope.
    * Append noapic and nomodeset to the kernel in GRUB - nope.
    * Install and try kernel26-lts - seems to work, although I don't understand what other differences there are (e.g., it doesn't start X). At least this seems to suggest that it's not a hardware problem.
    * Unplug all USB devices before boot - sometimes works, sometimes not. Doesn't seem to be a direct connection.
    * Remove my custom settings in /etc/modprobe.d - nope.
    * A lot of other things I've forgotten.
    Edit: I forgot to mention, once it's booted, the system works perfectly fine. No kernel panics etc. That's the second reason why I suspect it's not a hardware failure.
    I've been thinking about trying to downgrade the kernel and udev, but with the renaming and all dependencies I'm not sure how to do that.
    Since I've run out of ideas how to troubleshoot this issue, I would appreciate if I could get some suggestions here. I've search around and found similar posts but no solution that works for me.
    Finally, here are some more information.
    uname -a:
    Linux archon 3.0-ARCH #1 SMP PREEMPT Tue Aug 30 07:32:23 UTC 2011 i686 Intel(R) Pentium(R) 4 CPU 2.60GHz GenuineIntel GNU/Linux
    The packages that I upgraded with pacman -Syu that day (removed most KDE packages from the list):
    [2011-08-26 15:14] Running 'pacman-color -Syu'
    [2011-08-26 15:14] synchronizing package lists
    [2011-08-26 15:18] Running 'pacman-color -Sy pacman'
    [2011-08-26 15:18] synchronizing package lists
    [2011-08-26 15:18] upgraded linux-api-headers (2.6.38.1-1 -> 3.0.1-1)
    [2011-08-26 15:19] warning: /etc/locale.gen installed as /etc/locale.gen.pacnew
    [2011-08-26 15:19] Generating locales...
    [2011-08-26 15:19] en_US.UTF-8... done
    [2011-08-26 15:19] en_US.ISO-8859-1... done
    [2011-08-26 15:19] sv_SE.UTF-8... done
    [2011-08-26 15:19] sv_SE.ISO-8859-1... done
    [2011-08-26 15:19] Generation complete.
    [2011-08-26 15:19] upgraded glibc (2.13-5 -> 2.14-5)
    [2011-08-26 15:19] upgraded pacman (3.5.3-1 -> 3.5.4-4)
    [2011-08-26 15:27] Running 'pacman-color -Syu'
    [2011-08-26 15:27] synchronizing package lists
    [2011-08-26 15:27] starting full system upgrade
    [2011-08-26 15:29] Running 'pacman-color -Syu'
    [2011-08-26 15:29] synchronizing package lists
    [2011-08-26 15:29] starting full system upgrade
    [2011-08-26 15:29] Running 'pacman-color -Rsn linuxwacom-bamboo-cth-ctl'
    [2011-08-26 15:29] removed linuxwacom-bamboo-cth-ctl (0.10.99.1-1)
    [2011-08-26 15:29] Running 'pacman-color -Syu'
    [2011-08-26 15:29] synchronizing package lists
    [2011-08-26 15:29] starting full system upgrade
    [2011-08-26 15:29] Running 'pacman-color -Syu'
    [2011-08-26 15:29] synchronizing package lists
    [2011-08-26 15:29] starting full system upgrade
    [2011-08-26 15:53] Running 'pacman-color -Syu'
    [2011-08-26 15:53] synchronizing package lists
    [2011-08-26 15:54] starting full system upgrade
    [2011-08-26 16:03] warning: /etc/krb5.conf saved as /etc/krb5.conf.pacsave
    [2011-08-26 16:03] removed heimdal (1.3.3-4)
    [2011-08-26 16:03] removed eigen (2.0.15-1)
    [2011-08-26 16:03] removed python2-qt (4.8.3-1)
    [2011-08-26 16:03] removed kernel26 (2.6.38.5-1)
    [2011-08-26 16:04] removed kernel26-headers (2.6.38.5-1)
    [2011-08-26 16:04] removed libreoffice (3.3.2-2)
    [2011-08-26 16:04] upgraded readline (6.2.001-1 -> 6.2.001-2)
    [2011-08-26 16:04] upgraded bash (4.2.008-1 -> 4.2.010-1)
    [2011-08-26 16:04] upgraded attr (2.4.44-3 -> 2.4.46-1)
    [2011-08-26 16:04] upgraded acl (2.2.49-2 -> 2.2.51-1)
    [2011-08-26 16:04] upgraded rsync (3.0.8-1 -> 3.0.8-2)
    [2011-08-26 16:04] upgraded abs (2.4.2-1 -> 2.4.3-1)
    [2011-08-26 16:04] upgraded gcc-libs (4.6.0-4 -> 4.6.1-3)
    [2011-08-26 16:04] upgraded zlib (1.2.5-3 -> 1.2.5-4)
    [2011-08-26 16:04] upgraded icu (4.6.1-1 -> 4.8.1-1)
    [2011-08-26 16:04] upgraded boost-libs (1.46.0-4 -> 1.47.0-1)
    [2011-08-26 16:04] upgraded libmysqlclient (5.5.11-1 -> 5.5.15-1)
    [2011-08-26 16:04] upgraded mysql-clients (5.5.11-1 -> 5.5.15-1)
    [2011-08-26 16:04] hostname and {,yp,nis}domainname has moved:
    [2011-08-26 16:04] ----------
    [2011-08-26 16:04] hostname is now in coreutils
    [2011-08-26 16:04] domainname is now in yp-tools
    [2011-08-26 16:04] their functionality might have changed slightly
    [2011-08-26 16:04]
    [2011-08-26 16:04] dnsdomainname remains in net-tools
    [2011-08-26 16:04] ----------
    [2011-08-26 16:04] upgraded net-tools (1.60-14 -> 1.60-18)
    [2011-08-26 16:04] warning: directory permissions differ on var/lib/mysql/
    filesystem: 755 package: 700
    [2011-08-26 16:04] upgraded mysql (5.5.11-1 -> 5.5.15-1)
    [2011-08-26 16:04] upgraded libpng (1.4.5-1 -> 1.4.8-1)
    [2011-08-26 16:04] upgraded sqlite3 (3.7.6.1-1 -> 3.7.7.1-1)
    [2011-08-26 16:04] upgraded run-parts (3.4.1-1 -> 3.4.4-1)
    [2011-08-26 16:04] upgraded db (5.1.25-1 -> 5.2.28-1)
    [2011-08-26 16:04] installed libgssglue (0.3-1)
    [2011-08-26 16:04] installed libtirpc (0.2.2-2)
    [2011-08-26 16:04] upgraded pam (1.1.3-1 -> 1.1.4-1)
    [2011-08-26 16:04] Fixing gshadow file ...
    [2011-08-26 16:04] upgraded shadow (4.1.4.3-1 -> 4.1.4.3-2)
    [2011-08-26 16:04] upgraded gmp (5.0.1-2 -> 5.0.2-3)
    [2011-08-26 16:04] upgraded libcap (2.20-1 -> 2.22-1)
    [2011-08-26 16:04] upgraded coreutils (8.12-1 -> 8.12-3)
    [2011-08-26 16:04] Updating certificates. This might take a while...
    [2011-08-26 16:04] upgraded ca-certificates (20090814+nmu2-1 -> 20110421-3)
    [2011-08-26 16:04] upgraded pcre (8.12-1 -> 8.13-2)
    [2011-08-26 16:04] upgraded glib2 (2.28.6-1 -> 2.28.8-1)
    [2011-08-26 16:04] upgraded iana-etc (2.30-1 -> 2.30-2)
    [2011-08-26 16:04] warning: /etc/fstab installed as /etc/fstab.pacnew
    [2011-08-26 16:04] warning: directory permissions differ on run/
    filesystem: 1777 package: 755
    [2011-08-26 16:04] upgraded filesystem (2011.04-1 -> 2011.08-1)
    [2011-08-26 16:04] upgraded dbus-core (1.4.1-1 -> 1.4.14-1)
    [2011-08-26 16:04] upgraded xproto (7.0.21-1 -> 7.0.22-1)
    [2011-08-26 16:04] upgraded libx11 (1.4.3-2 -> 1.4.4-1)
    [2011-08-26 16:05] upgraded dbus (1.4.1-1 -> 1.4.14-1)
    [2011-08-26 16:05] upgraded freetype2 (2.4.4-2 -> 2.4.6-1)
    [2011-08-26 16:05] upgraded libxfont (1.4.3-1 -> 1.4.4-1)
    [2011-08-26 16:05] upgraded util-linux (2.19-4 -> 2.19.1-3)
    [2011-08-26 16:05] upgraded module-init-tools (3.12-2 -> 3.16-1)
    [2011-08-26 16:05] ATTENTION UDEV:
    [2011-08-26 16:05] ----------
    [2011-08-26 16:05] Kernel 2.6.32 or newer is now required.
    [2011-08-26 16:05] --
    [2011-08-26 16:05] OSS emulation modules are not loaded by default, add to rc.conf if needed.
    [2011-08-26 16:05] --
    [2011-08-26 16:05] Arch specific cd symlinks are now no longer created.
    [2011-08-26 16:05] --
    [2011-08-26 16:05] cd and net persistent rules will no longer be autogenerated,
    [2011-08-26 16:05] see <https://wiki.archlinux.org/index.php/Udev> for details.
    [2011-08-26 16:05] --
    [2011-08-26 16:05] Errors are now logged (possibly to the console) by default.
    [2011-08-26 16:05] --
    [2011-08-26 16:05] Arch's custom blacklisting logic has been removed. MOD_AUTOLOAD and
    [2011-08-26 16:05] blacklisting in MODULES no longer works.
    [2011-08-26 16:05] See 'man modprobe.conf' for a replacement to blacklisting.
    [2011-08-26 16:05] To disable a module mod1 on the kernel command line, use
    [2011-08-26 16:05] mod1.disable=1
    [2011-08-26 16:05] or
    [2011-08-26 16:05] modprobe.blacklist=mod1
    [2011-08-26 16:05] --
    [2011-08-26 16:05] The following modules are no longer unconditionally loaded:
    [2011-08-26 16:05] pcspkr irtty-sir analog lp ppdev ide-generic
    [2011-08-26 16:05] Add them to MODULES in rc.conf if you need them.
    [2011-08-26 16:05] --
    [2011-08-26 16:05] Support for non-devtmpfs self-compiled kernels have been moved to udev-compat.
    [2011-08-26 16:05] --
    [2011-08-26 16:05] Blacklisting of framebuffer devices has moved from /etc/modprobe.d to
    [2011-08-26 16:05] /lib/modprobe.d. Any customizations shoud be done to the file in /etc, as it
    [2011-08-26 16:05] takes precedence.
    [2011-08-26 16:05] --
    [2011-08-26 16:05] kbd and rtc devices are no longer world readable.
    [2011-08-26 16:05] --
    [2011-08-26 16:05] rtc is no longer in the audio group and fb devices are no longer in
    [2011-08-26 16:05] the video group, as permissions and ownership of fb devices are controlled
    [2011-08-26 16:05] by X.
    [2011-08-26 16:05] ---------------
    [2011-08-26 16:05] upgraded udev (167-2 -> 173-3)
    [2011-08-26 16:05] upgraded libdrm (2.4.25-1 -> 2.4.26-1)
    [2011-08-26 16:05] upgraded pixman (0.20.2-1 -> 0.22.2-1)
    [2011-08-26 16:05] upgraded libgpg-error (1.9-3 -> 1.10-1)
    [2011-08-26 16:05] upgraded libgcrypt (1.4.6-3 -> 1.5.0-1)
    [2011-08-26 16:05] upgraded xorg-xkbcomp (1.2.1-2 -> 1.2.3-1)
    [2011-08-26 16:05] upgraded xorg-server-common (1.10.1-1 -> 1.10.3.901-1)
    [2011-08-26 16:05] upgraded xorg-server (1.10.1-1 -> 1.10.3.901-1)
    [2011-08-26 16:05] upgraded nvidia-173xx-utils (173.14.30-1 -> 173.14.31-1)
    [2011-08-26 16:05] upgraded libxext (1.2.0-1 -> 1.3.0-1)
    [2011-08-26 16:05] upgraded libxrandr (1.3.1-1 -> 1.3.2-1)
    [2011-08-26 16:05] upgraded inputproto (2.0.1-1 -> 2.0.2-1)
    [2011-08-26 16:05] upgraded libxi (1.4.2-1 -> 1.4.3-1)
    [2011-08-26 16:05] upgraded xorg-xset (1.2.1-2 -> 1.2.2-1)
    [2011-08-26 16:05] upgraded xdg-utils (1.1.0rc1-2 -> 1.1.0rc1-3)
    [2011-08-26 16:05] upgraded qt (4.7.2-6 -> 4.7.3-3)
    [2011-08-26 16:05] installed libssh2 (1.2.9-1)
    [2011-08-26 16:05] upgraded curl (7.21.6-1 -> 7.21.7-1)
    [2011-08-26 16:05] upgraded raptor (2.0.2-1 -> 2.0.4-1)
    [2011-08-26 16:05] upgraded mpfr (3.0.1-1 -> 3.0.1.p4-2)
    [2011-08-26 16:05] upgraded rasqal (1:0.9.21-1 -> 1:0.9.27-1)
    [2011-08-26 16:05] upgraded binutils (2.21-7 -> 2.21.1-2)
    [2011-08-26 16:05] upgraded libmpc (0.9-1 -> 0.9-2)
    [2011-08-26 16:05] upgraded isl (0.06-1 -> 0.06-2)
    [2011-08-26 16:05] upgraded cloog (0.16.2-1 -> 0.16.2-2)
    [2011-08-26 16:05] upgraded ppl (0.11.2-1 -> 0.11.2-2)
    [2011-08-26 16:05] upgraded gcc (4.6.0-4 -> 4.6.1-3)
    [2011-08-26 16:05] upgraded libtool (2.4-3 -> 2.4-4)
    [2011-08-26 16:05] upgraded redland (1:1.0.12-1 -> 1:1.0.14-1)
    [2011-08-26 16:05] upgraded redland-storage-virtuoso (1:1.0.12-1 -> 1:1.0.14-1)
    [2011-08-26 16:05] upgraded soprano (2.6.0-5 -> 2.7.0-1)
    [2011-08-26 16:05] upgraded akonadi (1.5.2-1 -> 1.6.0-2)
    [2011-08-26 16:05] upgraded dialog (1.1_20110302-1 -> 1.1_20110707-1)
    [2011-08-26 16:05] upgraded psmisc (22.13-1 -> 22.14-1)
    [2011-08-26 16:05] upgraded alsa-utils (1.0.24.2-1 -> 1.0.24.2-3)
    [2011-08-26 16:06] upgraded exiv2 (0.21.1-1 -> 0.21.1-2)
    [2011-08-26 16:06] upgraded strigi (git20110405-1 -> 0.7.5-4)
    [2011-08-26 16:06] upgraded xz (5.0.2-1 -> 5.0.3-1)
    [2011-08-26 16:06] upgraded libsasl (2.1.23-5 -> 2.1.23-7)
    [2011-08-26 16:06] upgraded libldap (2.4.24-1 -> 2.4.26-3)
    [2011-08-26 16:06] upgraded keyutils (1.4-1 -> 1.5.2-1)
    [2011-08-26 16:06] installed krb5 (1.9.1-3)
    [2011-08-26 16:06] upgraded shared-desktop-ontologies (0.6.0-1 -> 0.7.1-1)
    [2011-08-26 16:06] upgraded libdbusmenu-qt (0.8.2-1 -> 0.8.3-1)
    [2011-08-26 16:06] upgraded grantlee (0.1.8-1 -> 0.1.9-1)
    [2011-08-26 16:06] upgraded aspell (0.60.6-5 -> 0.60.6.1-1)
    [2011-08-26 16:06] upgraded dbus-glib (0.92-1 -> 0.94-2)
    [2011-08-26 16:06] upgraded hunspell (1.2.15-1 -> 1.3.2-1)
    [2011-08-26 16:06] upgraded enchant (1.6.0-1 -> 1.6.0-3)
    [2011-08-26 16:06] upgraded libogg (1.2.2-1 -> 1.3.0-1)
    [2011-08-26 16:06] upgraded flac (1.2.1-2 -> 1.2.1-3)
    [2011-08-26 16:06] upgraded libsndfile (1.0.24-1 -> 1.0.25-1)
    [2011-08-26 16:06] upgraded libpulse (0.9.22-2 -> 0.9.23-1)
    [2011-08-26 16:06] installed libqzeitgeist (0.7.0-1)
    [2011-08-26 16:06] upgraded pango (1.28.4-2 -> 1.28.4-3)
    [2011-08-26 16:06] upgraded gstreamer0.10 (0.10.32-1 -> 0.10.35-1)
    [2011-08-26 16:06] upgraded gstreamer0.10-base (0.10.32-4 -> 0.10.35-1)
    [2011-08-26 16:06] upgraded gstreamer0.10-base-plugins (0.10.32-4 -> 0.10.35-1)
    [2011-08-26 16:06] upgraded phonon-gstreamer (4.5.0-1 -> 4.5.1-1)
    [2011-08-26 16:06] upgraded sdl (1.2.14-6 -> 1.2.14-7)
    [2011-08-26 16:06] upgraded xvidcore (1.3.1-1 -> 1.3.2-1)
    [2011-08-26 16:06] upgraded x264 (20110327-1 -> 20110617-1)
    [2011-08-26 16:06] upgraded libvpx (0.9.6-2 -> 0.9.7.p1-1)
    [2011-08-26 16:06] upgraded libva (1.0.12-1 -> 1.0.14-1)
    [2011-08-26 16:06] installed rtmpdump (2.4-1)
    [2011-08-26 16:06] upgraded ffmpeg (20110330-1 -> 20110724-1)
    [2011-08-26 16:06] upgraded cifs-utils (4.9-2 -> 4.9-3)
    [2011-08-26 16:06] upgraded smbclient (3.5.8-2 -> 3.6.0-4)
    [2011-08-26 16:06] upgraded mesa (7.10.2-2 -> 7.11-1)
    [2011-08-26 16:06] upgraded libsamplerate (0.1.7-1 -> 0.1.8-1)
    [2011-08-26 16:06] upgraded jack (0.120.1-1 -> 0.121.2-2)
    [2011-08-26 16:06] upgraded fluidsynth (1.1.3-2 -> 1.1.4-1)
    [2011-08-26 16:06] upgraded libass (0.9.11-1 -> 0.9.13-1)
    [2011-08-26 16:06] upgraded libproxy (0.4.6-6 -> 0.4.7-1)
    [2011-08-26 16:06] upgraded libjpeg-turbo (1.1.0-1 -> 1.1.1-3)
    [2011-08-26 16:06] upgraded v4l-utils (0.8.3-1 -> 0.8.5-1)
    [2011-08-26 16:06] upgraded taglib (1.7-1 -> 1.7-3)
    [2011-08-26 16:06] upgraded libdvbpsi (0.1.7-1 -> 0.2.0-1)
    [2011-08-26 16:06] upgraded libebml (1.2.0-1 -> 1.2.1-1)
    [2011-08-26 16:06] upgraded libmatroska (1.1.0-1 -> 1.2.0-1)
    [2011-08-26 16:06] upgraded libmodplug (0.8.8.1-1 -> 0.8.8.3-1)
    [2011-08-26 16:06] upgraded libmpeg2 (0.5.1-1 -> 0.5.1-3)
    [2011-08-26 16:06] upgraded libmtp (1.0.2-2 -> 1.1.0-1)
    [2011-08-26 16:06] installed libupnp (1.6.13-1)
    [2011-08-26 16:06] upgraded vlc (1.1.9-1 -> 1.1.11-4)
    [2011-08-26 16:06] upgraded phonon-vlc (0.4.0-1 -> 0.4.1-1)
    [2011-08-26 16:06] upgraded phonon (4.5.0-1 -> 4.5.55-1)
    [2011-08-26 16:06] upgraded upower (0.9.10-1 -> 0.9.12-1)
    [2011-08-26 16:07] upgraded device-mapper (2.02.84-1 -> 2.02.88-1)
    [2011-08-26 16:07] upgraded parted (2.3-1 -> 3.0-3)
    [2011-08-26 16:07] upgraded lvm2 (2.02.84-1 -> 2.02.88-1)
    [2011-08-26 16:07] upgraded eject (2.1.5-5 -> 2.1.5-7)
    [2011-08-26 16:07] upgraded udisks (1.0.3-2 -> 1.0.3-6)
    [2011-08-26 16:07] upgraded libxcursor (1.1.11-1 -> 1.1.12-1)
    [2011-08-26 16:07] upgraded ntrack (1:13-1 -> 1:13-2)
    [2011-08-26 16:07] upgraded libssh (0.4.8-1 -> 0.5.1-1)
    [2011-08-26 16:07] upgraded oxygen-icons (4.6.2-1 -> 4.7.0-1)
    [2011-08-26 16:07] upgraded xorg-xauth (1.0.5-2 -> 1.0.6-1)
    [2011-08-26 16:07] installed qjson (0.7.1-1)
    [2011-08-26 16:08] upgraded amarok (2.4.0-4 -> 2.4.3-1)
    [2011-08-26 16:08] upgraded apr (1.4.2-1 -> 1.4.5-1)
    [2011-08-26 16:08] upgraded apr-util (1.3.10-2 -> 1.3.12-2)
    [2011-08-26 16:08] upgraded atk (2.0.0-1 -> 2.0.1-1)
    [2011-08-26 16:08] upgraded avahi (0.6.30-2 -> 0.6.30-4)
    [2011-08-26 16:08] installed eigen2 (2.0.16-1)
    [2011-08-26 16:08] upgraded libffi (3.0.9-1 -> 3.0.10-1)
    [2011-08-26 16:08] upgraded python (3.2-2 -> 3.2.1-1)
    [2011-08-26 16:08] installed sip (4.12.4-1)
    [2011-08-26 16:08] installed pyqt (4.8.5-1)
    [2011-08-26 16:08] upgraded python2 (2.7.1-9 -> 2.7.2-2)
    [2011-08-26 16:08] upgraded python2-sip (4.12.1-1 -> 4.12.4-1)
    [2011-08-26 16:08] upgraded dbus-python (0.83.1-2 -> 0.84.0-1)
    [2011-08-26 16:08] installed python2-pyqt (4.8.5-1)
    [2011-08-26 16:08] upgraded glew (1.5.8-1 -> 1.6.0-1)
    [2011-08-26 16:08] upgraded blas (3.3.0-2 -> 3.3.1-2)
    [2011-08-26 16:08] upgraded lapack (3.3.0-2 -> 3.3.1-2)
    [2011-08-26 16:08] upgraded python2-numpy (1.5.1-2 -> 1.6.0-1)
    [2011-08-26 16:08] upgraded avogadro (1.0.3-1 -> 1.0.3-3)
    [2011-08-26 16:08] upgraded bison (2.4.3-1 -> 2.5-1)
    [2011-08-26 16:08] upgraded bluez (4.93-1 -> 4.96-1)
    [2011-08-26 16:08] upgraded boost (1.46.0-4 -> 1.47.0-1)
    [2011-08-26 16:08] upgraded cabextract (1.3-1 -> 1.4-1)
    [2011-08-26 16:08] upgraded libsigc++ (2.2.9-1 -> 2.2.10-1)
    [2011-08-26 16:08] upgraded cairomm (1.9.8-1 -> 1.10.0-1)
    [2011-08-26 16:08] upgraded chmlib (0.40-1 -> 0.40-2)
    [2011-08-26 16:08] installed nettle (2.2-1)
    [2011-08-26 16:08] upgraded gnutls (2.12.3-1 -> 3.0.1-1)
    [2011-08-26 16:08] upgraded libcups (1.4.6-1 -> 1.4.8-2)
    [2011-08-26 16:08] upgraded gdk-pixbuf2 (2.23.3-1 -> 2.23.5-1)
    [2011-08-26 16:08] upgraded gtk-update-icon-cache (2.24.4-1 -> 2.24.5-3)
    [2011-08-26 16:08] upgraded gtk2 (2.24.4-1 -> 2.24.5-3)
    [2011-08-26 16:09] upgraded nspr (4.8.7-1 -> 4.8.9-1)
    [2011-08-26 16:09] upgraded nss (3.12.9-1 -> 3.12.11-1)
    [2011-08-26 16:09] upgraded libevent (2.0.10-1 -> 2.0.12-1)
    [2011-08-26 16:09] upgraded xorg-mkfontscale (1.0.8-1 -> 1.0.9-1)
    [2011-08-26 16:10] upgraded ttf-dejavu (2.32-2 -> 2.33-1)
    [2011-08-26 16:10] upgraded chromium (11.0.696.57-1 -> 13.0.782.215-1)
    [2011-08-26 16:10] upgraded cln (1.3.1-1 -> 1.3.2-1)
    [2011-08-26 16:10] upgraded clucene (0.9.21b-1 -> 2.3.3.4-1)
    [2011-08-26 16:11] upgraded cmake (2.8.4-1 -> 2.8.5-1)
    [2011-08-26 16:11] upgraded consolekit (0.4.4-1 -> 0.4.5-1)
    [2011-08-26 16:11] upgraded cryptsetup (1.2.0-1 -> 1.3.1-2)
    [2011-08-26 16:11] upgraded poppler (0.16.4-1 -> 0.16.7-1)
    [2011-08-26 16:11] daemon script has been renamed to /etc/rc.d/cupsd
    [2011-08-26 16:11] change your entry in /etc/rc.conf
    [2011-08-26 16:11] upgraded cups (1.4.6-1 -> 1.4.8-2)
    [2011-08-26 16:11] upgraded cvs (1.11.23-6 -> 1.11.23-7)
    [2011-08-26 16:11] upgraded dash (0.5.6.1-2 -> 0.5.7-2)
    [2011-08-26 16:11] upgraded dconf (0.7.3-2 -> 0.8.0-1)
    [2011-08-26 16:11] upgraded dcron (4.4-2 -> 4.5-2)
    [2011-08-26 16:11] upgraded diffutils (3.0-2 -> 3.1-1)
    [2011-08-26 16:11] upgraded libksba (1.0.8-1 -> 1.2.0-1)
    [2011-08-26 16:11] upgraded libassuan (2.0.1-1 -> 2.0.2-1)
    [2011-08-26 16:11] upgraded dirmngr (1.1.0-1 -> 1.1.0-3)
    [2011-08-26 16:11] upgraded dri2proto (2.3-1 -> 2.6-1)
    [2011-08-26 16:11] upgraded fakeroot (1.15.1-1 -> 1.17-1)
    [2011-08-26 16:11] upgraded file (5.06-1 -> 5.08-1)
    [2011-08-26 16:11] upgraded startup-notification (0.10-2 -> 0.12-1)
    [2011-08-26 16:11] upgraded mime-types (1.0-3 -> 8-1)
    [2011-08-26 16:11] upgraded libnotify (0.7.2-1 -> 0.7.3-1)
    [2011-08-26 16:11] upgraded firefox (4.0.1-1 -> 6.0-1)
    [2011-08-26 16:11] upgraded flashplugin (10.2.159.1-2 -> 10.3.183.7-1)
    [2011-08-26 16:11] - The directories /usr/lib/perl5/current, /usr/lib/perl5/site_perl/current,
    [2011-08-26 16:11] /usr/lib/perl5/site_perl/5.10.1, and /usr/share/perl5/site_perl/5.10.1
    [2011-08-26 16:11] have been removed from @INC.
    [2011-08-26 16:11] - The script/binary directories are now /usr/bin/*_perl instead of
    [2011-08-26 16:11] /usr/lib/perl5/*_perl/bin which will be eventually removed.
    [2011-08-26 16:11] upgraded perl (5.12.3-1 -> 5.14.1-3)
    [2011-08-26 16:11] upgraded foomatic-db (4.0.6_20101215-1 -> 1:4.0.7_20110707-1)
    [2011-08-26 16:11] upgraded foomatic-filters (4.0.6_20101215-1 -> 1:4.0.7_20110707-1)
    [2011-08-26 16:11] upgraded foomatic-db-engine (4.0.6_20101215-1 -> 1:4.0.7_20110707-1)
    [2011-08-26 16:11] upgraded fortune-mod (1.99.1-4 -> 1.99.1-5)
    [2011-08-26 16:12] upgraded fpc (2.4.2-1 -> 2.4.4-3)
    [2011-08-26 16:12] upgraded gawk (3.1.8-2 -> 4.0.0-1)
    [2011-08-26 16:12] upgraded gc (7.1-1 -> 7.1-3)
    [2011-08-26 16:12] upgraded gcc-fortran (4.6.0-4 -> 4.6.1-3)
    [2011-08-26 16:12] upgraded gdb (7.2-2 -> 7.3-2)
    [2011-08-26 16:12] upgraded libftdi (0.18-2 -> 0.19-1)
    [2011-08-26 16:12] upgraded lirc-utils (1:0.9.0-2 -> 1:0.9.0-6)
    [2011-08-26 16:12] installed mpg123 (1.13.3-2)
    [2011-08-26 16:12] upgraded mplayer (33159-1 -> 34007-1)
    [2011-08-26 16:12] upgraded gnome-mplayer (1.0.3-1 -> 1.0.4-1)
    [2011-08-26 16:12] upgraded gecko-mediaplayer (1.0.3-1 -> 1.0.4-1)
    [2011-08-26 16:12] upgraded libggz (0.0.14.1-1 -> 0.0.14.1-2)
    [2011-08-26 16:12] upgraded ggz-client-libs (0.0.14.1-1 -> 0.0.14.1-2)
    [2011-08-26 16:12] upgraded ghostscript (9.02-1 -> 9.04-5)
    [2011-08-26 16:12] upgraded pygobject-devel (2.28.4-1 -> 2.28.6-1)
    [2011-08-26 16:12] upgraded pygobject (2.28.4-1 -> 2.28.6-1)
    [2011-08-26 16:12] upgraded pygtk (2.24.0-1 -> 2.24.0-2)
    [2011-08-26 16:12] upgraded gimp (2.6.11-5 -> 2.6.11-6)
    [2011-08-26 16:12] upgraded git (1.7.5-1 -> 1.7.6.1-1)
    [2011-08-26 16:12] upgraded glibmm (2.28.0-1 -> 2.28.2-1)
    [2011-08-26 16:12] upgraded glib-networking (2.28.6.1-2 -> 2.28.7-4)
    [2011-08-26 16:12] upgraded glproto (1.4.12-1 -> 1.4.14-1)
    [2011-08-26 16:12] upgraded gnugo (3.8-1 -> 3.8-2)
    [2011-08-26 16:12] upgraded gnupg (1.4.11-2 -> 1.4.11-3)
    [2011-08-26 16:12] upgraded pinentry (0.8.1-1 -> 0.8.1-3)
    [2011-08-26 16:12] upgraded gnupg2 (2.0.17-1 -> 2.0.18-1)
    [2011-08-26 16:12] upgraded wxgtk (2.8.12-1 -> 2.8.12.1-1)
    [2011-08-26 16:12] ==> To add the gnuplot mode in Emacs, add the content of /usr/share/emacs/site-lisp/dotemacs to your ~/.emacs file.
    [2011-08-26 16:12] Updating TeX tree...
    [2011-08-26 16:12] mktexlsr: Updating /etc/texmf/ls-R...
    [2011-08-26 16:12] mktexlsr: Updating /usr/share/texmf/ls-R...
    [2011-08-26 16:12] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
    [2011-08-26 16:13] mktexlsr: Updating /var/lib/texmf/ls-R...
    [2011-08-26 16:13] mktexlsr: Done.
    [2011-08-26 16:13] upgraded gnuplot (4.4.2-2 -> 4.4.3-1)
    [2011-08-26 16:13] upgraded gtkmm (2.24.0-1 -> 2.24.2-1)
    [2011-08-26 16:13] upgraded gparted (0.8.0-2 -> 0.9.0-3)
    [2011-08-26 16:13] upgraded gpgme (1.3.0-1 -> 1.3.1-1)
    [2011-08-26 16:13] upgraded gpsd (2.96-1 -> 3.0-3)
    [2011-08-26 16:13] upgraded graphicsmagick (1.3.12-1 -> 1.3.12-2)
    [2011-08-26 16:13] upgraded grep (2.7-1 -> 2.9-1)
    [2011-08-26 16:13] warning: /boot/grub/menu.lst installed as /boot/grub/menu.lst.pacnew
    [2011-08-26 16:13] upgraded grub (0.97-17 -> 0.97-20)
    [2011-08-26 16:13] upgraded gsl (1.14-1 -> 1.15-1)
    [2011-08-26 16:13] upgraded vim-runtime (7.3.138-1 -> 7.3.266-1)
    [2011-08-26 16:13] upgraded ruby (1.9.2_p180-1 -> 1.9.2_p290-1)
    [2011-08-26 16:13] Updating desktop and mime database...done.
    [2011-08-26 16:13] upgraded gvim (7.3.138-1 -> 7.3.266-1)
    [2011-08-26 16:13] upgraded hdf5 (1.8.6-1 -> 1.8.7-1)
    [2011-08-26 16:13] upgraded heirloom-mailx (12.5-1 -> 12.5-2)
    [2011-08-26 16:13] upgraded htop (0.9-1 -> 0.9-2)
    [2011-08-26 16:13] installed lcms2 (2.2-1)
    [2011-08-26 16:13] upgraded imagemagick (6.6.9.4-1 -> 6.7.1.6-1)
    [2011-08-26 16:13] installed iproute2 (2.6.39-1)
    [2011-08-26 16:13] upgraded kbd (1.15.2-1 -> 1.15.3-1)
    [2011-08-26 16:13] warning: /etc/inittab installed as /etc/inittab.pacnew
    [2011-08-26 16:13] warning: /etc/rc.conf installed as /etc/rc.conf.pacnew
    [2011-08-26 16:13] Blacklisting of modules is no longer supported in rc.conf,
    [2011-08-26 16:13] please add blacklist entries to /etc/modprobe.d/ instead.
    [2011-08-26 16:13] VERBOSE= in rc.conf no longer has any effect.
    [2011-08-26 16:13] Please append 'quiet' to your kernel command line.
    [2011-08-26 16:13] upgraded initscripts (2011.04.1-2 -> 2011.07.3-1)
    [2011-08-26 16:13] upgraded poppler-glib (0.16.4-1 -> 0.16.7-1)
    [2011-08-26 16:13] upgraded inkscape (0.48.1-2 -> 0.48.2-1)
    [2011-08-26 16:13] upgraded irssi (0.8.15-4 -> 0.8.15-5)
    [2011-08-26 16:13] upgraded jfsutils (1.1.14-2 -> 1.1.15-2)
    [2011-08-26 16:14] upgraded jre (6u25-1 -> 7-3)
    [2011-08-26 16:14] upgraded libdmtx (0.7.2-2 -> 0.7.4-1)
    [2011-08-26 16:14] installed qrencode (3.1.1-2)
    [2011-08-26 16:14] installed prison (1.0-1)
    [2011-08-26 16:14] upgraded libedit (20110227_3.0-1 -> 20110802_3.0-1)
    [2011-08-26 16:14] upgraded openssh (5.8p2-1 -> 5.8p2-9)
    [2011-08-26 16:14] upgraded lm_sensors (3.3.0-1 -> 3.3.1-2)
    [2011-08-26 16:14] upgraded xorg-xprop (1.2.0-2 -> 1.2.1-1)
    [2011-08-26 16:14] warning: /usr/share/config/kdm/kdmrc installed as /usr/share/config/kdm/kdmrc.pacnew
    [2011-08-26 16:14] installed libkexiv2 (4.7.0-2)
    [2011-08-26 16:15] upgraded qscintilla (2.5.1-1 -> 2.5.1-2)
    [2011-08-26 16:15] installed ocaml (3.12.1-1)
    [2011-08-26 16:15] installed libkipi (4.7.0-2)
    [2011-08-26 16:16] upgraded sane (1.0.22-1 -> 1.0.22-2)
    [2011-08-26 16:16] installed libksane (4.7.0-2)
    [2011-08-26 16:16] installed libkdcraw (4.7.0-2)
    [2011-08-26 16:16] upgraded poppler-qt (0.16.4-1 -> 0.16.7-1)
    [2011-08-26 16:16] upgraded libidn (1.21-1 -> 1.22-1)
    [2011-08-26 16:16] upgraded qt3 (3.3.8-19 -> 3.3.8-20)
    [2011-08-26 16:16] upgraded libktorrent (1.1.1-1 -> 1.1.2-1)
    [2011-08-26 16:16] installed libmms (0.6.2-1)
    [2011-08-26 16:16] upgraded libgadu (1.10.1-1 -> 1.11.0-1)
    [2011-08-26 16:16] installed ortp (0.16.5-1)
    [2011-08-26 16:16] installed mediastreamer (2.7.3-3)
    [2011-08-26 16:17] upgraded qwt (5.2.1-1 -> 6.0.0-1)
    [2011-08-26 16:17] upgraded neon (0.29.3-2 -> 0.29.6-2)
    [2011-08-26 16:17] upgraded subversion (1.6.15-1 -> 1.6.17-6)
    [2011-08-26 16:17] upgraded linux-firmware (20110227-1 -> 20110727-1)
    [2011-08-26 16:17] upgraded mkinitcpio-busybox (1.18.2-1 -> 1.18.5-1)
    [2011-08-26 16:17] upgraded mkinitcpio (0.6.11-1 -> 0.7.2-1)
    [2011-08-26 16:18] >>> Updating module dependencies. Please wait ...
    [2011-08-26 16:18] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2011-08-26 16:18] ==> Building image from preset: 'default'
    [2011-08-26 16:18] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2011-08-26 16:18] ==> Starting build: 3.0-ARCH
    [2011-08-26 16:18] -> Parsing hook: [base]
    [2011-08-26 16:18] -> Parsing hook: [udev]
    [2011-08-26 16:18] -> Parsing hook: [autodetect]
    [2011-08-26 16:18] -> Parsing hook: [pata]
    [2011-08-26 16:18] -> Parsing hook: [scsi]
    [2011-08-26 16:18] -> Parsing hook: [sata]
    [2011-08-26 16:18] -> Parsing hook: [filesystems]
    [2011-08-26 16:18] -> Parsing hook: [usbinput]
    [2011-08-26 16:18] ==> Generating module dependencies
    [2011-08-26 16:18] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2011-08-26 16:18] 7278 blocks
    [2011-08-26 16:18] ==> Image generation successful
    [2011-08-26 16:18] ==> Building image from preset: 'fallback'
    [2011-08-26 16:18] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2011-08-26 16:18] ==> Starting build: 3.0-ARCH
    [2011-08-26 16:18] -> Parsing hook: [base]
    [2011-08-26 16:18] -> Parsing hook: [udev]
    [2011-08-26 16:18] -> Parsing hook: [pata]
    [2011-08-26 16:18] -> Parsing hook: [scsi]
    [2011-08-26 16:18] -> Parsing hook: [sata]
    [2011-08-26 16:18] -> Parsing hook: [filesystems]
    [2011-08-26 16:18] -> Parsing hook: [usbinput]
    [2011-08-26 16:18] ==> Generating module dependencies
    [2011-08-26 16:18] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2011-08-26 16:18] 23389 blocks
    [2011-08-26 16:18] ==> Image generation successful
    [2011-08-26 16:18] installed linux (3.0.3-1)
    [2011-08-26 16:18] installed linux-headers (3.0.3-1)
    [2011-08-26 16:18] upgraded koffice-servicetypes (2.3.3-3 -> 2.3.3-5)
    [2011-08-26 16:18] upgraded koffice-libs (2.3.3-3 -> 2.3.3-5)
    [2011-08-26 16:18] upgraded koffice-templates (2.3.3-3 -> 2.3.3-5)
    [2011-08-26 16:18] upgraded koffice-plugins (2.3.3-3 -> 2.3.3-5)
    [2011-08-26 16:19] upgraded koffice-krita (2.3.3-3 -> 2.3.3-5)
    [2011-08-26 16:19] upgraded ktorrent (4.1.1-1 -> 4.1.2-1)
    [2011-08-26 16:19] upgraded kwebkitpart (1.1-1 -> 1.1.1-1)
    [2011-08-26 16:19] upgraded less (443-1 -> 444-1)
    [2011-08-26 16:19] upgraded usbmuxd (1.0.6-2 -> 1.0.7-2)
    [2011-08-26 16:19] upgraded libimobiledevice (1.1.0-1 -> 1.1.1-2)
    [2011-08-26 16:19] upgraded libgpod (0.8.0-2 -> 0.8.2-2)
    [2011-08-26 16:19] upgraded libgsf (1.14.20-1 -> 1.14.21-1)
    [2011-08-26 16:19] upgraded liblqr (0.4.1-1 -> 0.4.1-2)
    [2011-08-26 16:19] installed libreoffice-en-US (3.4.2-2)
    [2011-08-26 16:19] installed libtextcat (2.2-8)
    [2011-08-26 16:19] * see https://wiki.archlinux.org/index.php/LibreOffice
    [2011-08-26 16:19] -------------------------------------------------------------------
    [2011-08-26 16:19] LibreOffice has been split into several packages:
    [2011-08-26 16:19] - libreoffice-common
    [2011-08-26 16:19] - libreoffice-{base,calc,draw,impress,math,writer} - frontend applications
    [2011-08-26 16:19] - libreoffice-{gnome,kde4} - desktop integration plugins
    [2011-08-26 16:19] - libreoffice-{sdk,sdk-doc} - add-on and doc for programming using
    [2011-08-26 16:19]  the LibreOffice APIs and for creating
    [2011-08-26 16:19] extensions (UNO components).
    [2011-08-26 16:19] -------------------------------------------------------------------
    [2011-08-26 16:19] * you need to install at least one libreoffice-langpack
    [2011-08-26 16:19] * you may want to pacman -Ss libreoffice-extensions
    [2011-08-26 16:19] to see what additional extensions are prepared to install
    [2011-08-26 16:19] * it's recommended to install {hunspell,mythes,hyphen}-xx pkg
    [2011-08-26 16:19] for spell checking
    [2011-08-26 16:19] * make sure you have installed some ttf font (ttf-dejavu recommended)
    [2011-08-26 16:19] installed libreoffice-common (3.4.2-2)
    [2011-08-26 16:19] installed libreoffice-base (3.4.2-2)
    [2011-08-26 16:19] installed libreoffice-calc (3.4.2-2)
    [2011-08-26 16:19] installed libreoffice-draw (3.4.2-2)
    [2011-08-26 16:19] installed libreoffice-impress (3.4.2-2)
    [2011-08-26 16:19] installed libreoffice-math (3.4.2-2)
    [2011-08-26 16:19] upgraded libwpd (0.9.1-1 -> 0.9.2-1)
    [2011-08-26 16:19] installed libwps (0.2.2-1)
    [2011-08-26 16:19] installed libreoffice-writer (3.4.2-2)
    [2011-08-26 16:19] upgraded libreoffice-extension-ct2n (3.3.2-2 -> 3.4.2-2)
    [2011-08-26 16:20] The jdk package is licensed software.
    [2011-08-26 16:20] You MUST read and agree to the license stored in
    [2011-08-26 16:20] /usr/share/licenses/jdk/LICENSE before using it.
    [2011-08-26 16:20] Please relogin to include jdk in your PATH
    [2011-08-26 16:20] installed jdk (7-3)
    [2011-08-26 16:20] upgraded libreoffice-extension-diagram (3.3.2-2 -> 3.4.2-2)
    [2011-08-26 16:20] upgraded libreoffice-extension-hunart (3.3.2-2 -> 3.4.2-2)
    [2011-08-26 16:20] upgraded libreoffice-extension-nlpsolver (3.3.2-2 -> 3.4.2-2)
    [2011-08-26 16:20] upgraded libreoffice-extension-numbertext (3.3.2-2 -> 3.4.2-2)
    [2011-08-26 16:20] upgraded libreoffice-extension-oooblogger (3.3.2-2 -> 3.4.2-2)
    [2011-08-26 16:20] upgraded libreoffice-extension-pdfimport (3.3.2-2 -> 3.4.2-2)
    [2011-08-26 16:20] upgraded libreoffice-extension-presentation-minimizer (3.3.2-2 -> 3.4.2-2)
    [2011-08-26 16:20] upgraded libreoffice-extension-presenter-screen (3.3.2-2 -> 3.4.2-2)
    [2011-08-26 16:20] upgraded libreoffice-extension-report-builder (3.3.2-2 -> 3.4.2-2)
    [2011-08-26 16:20] upgraded libreoffice-extension-typo (3.3.2-2 -> 3.4.2-2)
    [2011-08-26 16:20] upgraded libreoffice-extension-watch-window (3.3.2-2 -> 3.4.2-2)
    [2011-08-26 16:20] upgraded libreoffice-extension-wiki-publisher (3.3.2-2 -> 3.4.2-2)
    [2011-08-26 16:20] upgraded make (3.81-5 -> 3.82-3)
    [2011-08-26 16:20] upgraded libreoffice-sdk (3.3.2-2 -> 3.4.2-2)
    [2011-08-26 16:20] upgraded libsoup (2.34.1-1 -> 2.34.3-1)
    [2011-08-26 16:20] upgraded libwebkit (1.4.0-1 -> 1.4.2-1)
    [2011-08-26 16:20] upgraded links (2.3pre1-1 -> 2.3-1)
    [2011-08-26 16:20] upgraded logrotate (3.7.9-1 -> 3.8.0-1)
    [2011-08-26 16:20] upgraded luasocket (2.0.2-4 -> 2.0.2-5)
    [2011-08-26 16:20] upgraded lzo2 (2.04-1 -> 2.05-1)
    [2011-08-26 16:20] upgraded man-db (2.6.0.2-1 -> 2.6.0.2-2)
    [2011-08-26 16:20] upgraded mdadm (3.2.1-3 -> 3.2.2-3)
    [2011-08-26 16:20] upgraded mercurial (1.8.3-1 -> 1.9.1-1)
    [2011-08-26 16:21] ERROR: Module nvidia is in use
    [2011-08-26 16:21] In order to use the new nvidia module, exit Xserver and unload it manually.
    [2011-08-26 16:21] upgraded nvidia-173xx (173.14.30-1 -> 173.14.31-2)
    [2011-08-26 16:21] upgraded octave (3.4.0-2 -> 3.4.2-2)
    [2011-08-26 16:21] upgraded openal (1.13-1 -> 1.13-2)
    [2011-08-26 16:21] upgraded openbox (3.4.11.2-2 -> 3.5.0-3)
    [2011-08-26 16:21] upgraded xine-lib (1.1.19-2 -> 1.1.19-3)
    [2011-08-26 16:21] ==> Documentation and samples are in separate packages:
    [2011-08-26 16:21]
    [2011-08-26 16:21] * opencv-docs
    [2011-08-26 16:21] * opencv-samples
    [2011-08-26 16:21] upgraded opencv (2.2.0-5 -> 2.3.0-1)
    [2011-08-26 16:21] upgraded oxygen-gtk (1.0.4-1 -> 1.1.2-1)
    [2011-08-26 16:22] upgraded oxygen-icons-svg (4.6.2-1 -> 4.7.0-1)
    [2011-08-26 16:22] upgraded p7zip (9.20.1-1 -> 9.20.1-4)
    [2011-08-26 16:22] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
    [2011-08-26 16:22] upgraded pacman-mirrorlist (20110324-1 -> 20110816-1)
    [2011-08-26 16:22] upgraded pcmciautils (017-2 -> 018-1)
    [2011-08-26 16:22] upgraded perl-text-iconv (1.7-5 -> 1.7-6)
    [2011-08-26 16:22] upgraded perl-xml-parser (2.40-2 -> 2.41-1)
    [2011-08-26 16:22] upgraded pkg-config (0.25-3 -> 0.26-1)
    [2011-08-26 16:22] upgraded postgresql-libs (9.0.4-3 -> 9.0.4-4)
    [2011-08-26 16:22] upgraded procps (3.2.8-3 -> 3.2.8-4)
    [2011-08-26 16:22] upgraded python2-distribute (0.6.16-1 -> 0.6.19-1)
    [2011-08-26 16:22] upgraded qtcurve-gtk2 (1.8.8-1 -> 1.8.9-1)
    [2011-08-26 16:22] upgraded qtcurve-kde4 (1.8.7-1 -> 1.8.8-1)
    [2011-08-26 16:24] upgraded qt-doc (4.7.2-1 -> 4.7.3-1)
    [2011-08-26 16:24] >>> The kernel-mode plugin has a new place.
    [2011-08-26 16:24] >>> It's now located under /usr/lib/rp-pppoe/rp-pppoe.so
    [2011-08-26 16:24] >>> Change LINUX_PLUGIN to the new path in your /etc/ppp/pppoe.conf
    [2011-08-26 16:24] upgraded rp-pppoe (3.10-6 -> 3.10-7)
    [2011-08-26 16:24] upgraded rrdtool (1.4.5-1 -> 1.4.5-4)
    [2011-08-26 16:24] updating gtk.immodules... done.
    [2011-08-26 16:24] upgraded scim (1.4.9-2 -> 1.4.11-1)
    [2011-08-26 16:24] upgraded screen (4.0.3-11 -> 4.0.3-12)
    [2011-08-26 16:24] upgraded skype (2.2.0.25-1 -> 2.2.0.35-1)
    [2011-08-26 16:24] upgraded soundtouch (1.5.0-1 -> 1.6.0-1)
    [2011-08-26 16:24] upgraded sudo (1.8.1.p1-1 -> 1.8.2-1)
    [2011-08-26 16:24] upgraded syslog-ng (3.2.2-2 -> 3.2.4-3)
    [2011-08-26 16:25] upgraded tcl (8.5.9-1 -> 8.5.10-1)
    [2011-08-26 16:26] Updating font cache... done.
    [2011-08-26 16:26] Note: terminus-font is in /usr/share/fonts/local/
    [2011-08-26 16:26] upgraded terminus-font (4.32-1 -> 4.36-1)
    [2011-08-26 16:26] upgraded tk (8.5.9-1 -> 8.5.10-1)
    [2011-08-26 16:27] Updating font cache... done.
    [2011-08-26 16:27] upgraded ttf-liberation (1.06.0.20100721-1 -> 1.07.0-1)
    [2011-08-26 16:27] upgraded tzdata (2011g-1 -> 2011h-1)
    [2011-08-26 16:27] upgraded usbutils (002-2 -> 004-1)
    [2011-08-26 16:27] upgraded vi (050325-4 -> 1:050325-1)
    [2011-08-26 16:27] Updating vim help tags...done.
    [2011-08-26 16:27] upgraded vim-supertab (1.5-1 -> 1.6-1)
    [2011-08-26 16:27] Updating vim help tags...done.
    [2011-08-26 16:27] upgraded vim-vcscommand (1.99.42-1 -> 1.99.43-1)
    [2011-08-26 16:27] upgraded wget (1.12-5 -> 1.13.1-1)
    [2011-08-26 16:27] upgraded wine (1.3.19-2 -> 1.3.26-1)
    [2011-08-26 16:27] upgraded winetricks (20110429-1 -> 20110629-1)
    [2011-08-26 16:27] upgraded xcursor-themes (1.0.2-1 -> 1.0.3-1)
    [2011-08-26 16:27] upgraded xorg-iceauth (1.0.4-2 -> 1.0.5-1)
    [2011-08-26 16:27] upgraded xorg-util-macros (1.13.0-1 -> 1.15.0-1)
    [2011-08-26 16:27] upgraded xorg-server-devel (1.10.1-1 -> 1.10.3.901-1)
    [2011-08-26 16:27] upgraded xorg-twm (1.0.6-2 -> 1.0.7-1)
    [2011-08-26 16:27] upgraded xorg-x11perf (1.5.3-2 -> 1.5.4-1)
    [2011-08-26 16:27] upgraded xorg-xlsclients (1.1.1-2 -> 1.1.2-1)
    [2011-08-26 16:28] upgraded xorg-xrandr (1.3.4-2 -> 1.3.5-1)
    [2011-08-26 16:28] upgraded xorg-xwininfo (1.1.1-2 -> 1.1.2-1)
    [2011-08-26 16:28] upgraded xpdf (3.02_pl6-1 -> 3.03-1)
    [2011-08-26 16:28] upgraded xscreensaver (5.12-2 -> 5.14-1)
    [2011-08-26 16:28] upgraded xterm (269-1 -> 271-1)
    [2011-08-26 16:28] upgraded xulrunner (2.0.1-1 -> 6.0-2)
    [2011-08-26 16:28] upgraded zsnes (1.51-7 -> 1.51-9)
    /etc/rc.conf without any comments:
    LOCALE="en_US.UTF-8"
    DAEMON_LOCALE="no"
    HARDWARECLOCK="UTC"
    TIMEZONE="Europe/Stockholm"
    KEYMAP="se-lat6"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    MODULES=()
    UDEV_TIMEOUT=30
    USEDMRAID="no"
    USEBTRFS="no"
    USELVM="no"
    HOSTNAME="archon"
    interface=eth0
    address=
    netmask=
    broadcast=
    gateway=
    NETWORK_PERSIST="no"
    DAEMONS=(syslog-ng @network dbus preload !netfs @crond @cups @sshd @startntpd)
    /etc/mkinitcpio.conf without any comments:
    MODULES=""
    BINARIES=""
    FILES=""
    HOOKS="base udev autodetect pata scsi sata filesystems"
    Please let me know if you need to know anything else.
    Last edited by Mogger (2012-03-30 23:33:38)

    I've temporarily fixed the problem by doing the following:
    removed cryptsetup (1.3.1-2)
    removed lvm2 (2.02.88-1)
    removed mdadm (3.2.2-4)
    removed linux (3.0.6-2)
    upgraded mkinitcpio-busybox (1.18.5-1 -> 1.18.2-1)
    installed gen-init-cpio (2.6.36-1)
    upgraded udev (173-3 -> 167-2)
    upgraded mkinitcpio (0.7.3-1 -> 0.6.11-1)
    installed kernel26 (2.6.38.5-1)
    upgraded nvidia-173xx-utils (173.14.31-1 -> 173.14.30-1)
    upgraded nvidia-173xx (173.14.31-2 -> 173.14.30-1)
    upgraded initscripts (2011.07.3-1 -> 2011.04.1-2)
    upgraded net-tools (1.60.20110819cvs-1 -> 1.60-18)
    I also restored my old /etc/mkinitcpio.conf, /etc/inittab and /etc/rc.conf.
    I'm still interested in a solution to the original problem. Is it a problem with my configuration, the new kernel, the udev version or something else?
    The difference in inittab is just a -s option and the mkinitcpio.conf files are the same except for some comments. rc.conf has the biggest changes and is now (removed comments):
    LOCALE="en_US.UTF-8"
    DAEMON_LOCALE="no"
    HARDWARECLOCK="UTC"
    TIMEZONE="Europe/Stockholm"
    KEYMAP="se-lat6"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    VERBOSE="3"
    MOD_AUTOLOAD="yes"
    MODULES=(!usblp !pcspkr)
    UDEV_TIMEOUT=30
    USEDMRAID="no"
    USEBTRFS="no"
    USELVM="no"
    HOSTNAME="archon"
    eth0="dhcp"
    INTERFACES=(eth0)
    ROUTES=(!gateway)
    NETWORK_PERSIST="no"
    DAEMONS=(syslog-ng @network dbus preload !netfs !wicd @crond @cups @sshd @startntpd)
    Last edited by Mogger (2011-10-11 14:04:20)

  • Ipod touch restore waiting for ipod

    I want to restore my touch to the factory settings.  It will no longer do anything.
    If I connect to iTunes, it recognizes it and says it is in the process of recovery.
    When I continue, It begins extracting files and then goes into "waiting for ipod" mode where it remains without proceeding - even after leaving it for a day.
    Anyone now how I can proceed to get things to progress.
    Thanks for any help you can provide

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • HT201412 My itouch 4th gen 32 GB is stuck on restore logo for 3 hrs already.

    and since my home button no longer functions i have to use the accesibilty option, but anyways on the problem i restored it without using itunes and now its been on the restoring logo for 3 hrs going on 4 and its irritating me, what is the best option is to drain the battery and restore it again? advice needed

    Try:
    iOS: Not responding or does not turn on
    - Of not successful and you can't fully turn the iPod off let the battery fully drain. After charging for at least an hour try again
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    When the link says place the iPod in recovery mode, use this program instead.
    RecBoot: Easy Way to Put iPhone into Recovery Mode

Maybe you are looking for