IPhone 4s stuck in silent mode?

My IPhone 4s is stuck in silent mode. The red dot is not showing; my volume is turned up all the way. But when I get calls or texts, my phone only vibrates, and I can't hear the keyboard clicks. I know my speaker still works because I can get Siri to talk and I can hear my music playing. I've restarted it and restored it. It's not stuck in headphone mode, because even with headphones in I can't hear alert sounds or keyboard clicks. Any help so I can avoid the Genius Bar?

I have the same problem with my iPhone. I believe the silent switch is broken. I found a little work around though. Go to Settings-General-Accessibility scroll to the very bottom and turn on AssistiveTouch. In the top left corner of your screen a black box with a circle will appear. Select it then select device. A menu will pop up and on the right will be a selection for Mute/Unmute. You can then go back and turn off AssistiveTouch and the setting will remain applied.
Hope this helps you out.

Similar Messages

  • Iphone 4 stuck in silent mode

    I have the button on the left in the correct position but it is staying in silent mode.

    In regards to the button I was making sure as sometime users get confused which toggle setting is which. It is also often helpful to toggle it back and forth because sometimes the software missteps and thinks it is in a different position that it is.
    In sounds, Silent will be at the top as it is the first menu item. This just allows you to change the vibration setting. If you can still hear a ringtone when adjusting the slider it means your speaker is working.
    At this point I would recommend you [restore the phone|http://support.apple.com/kb/ht1414] to factory settings and start over because something is clearly not right.
    -SM

  • My iphone 5 is stuck in silent mode

    My iphone 5 is stuck in silent mode (even that I'm turning off the silent mode by using the switch). I already restore it but it didn't help. Anyone can help?

    If you go to Settings > Sounds do you have the volume bar for ringer and alerts moved to the right so the volume is high enough to hear?

  • My iphone is stuck on silent! even though it is not on silent mode, even when i lock the screen it doesn't make the loking sound and the keys don't make sounds when i tye even though the settings are on for the sounds.

    my iphone is stuck on silents, the side switch flicks but nothing happens PLEASE HELP!

    hi iphone users i have had the same problem with the no sound issue i have a little tweek that will gain all sound back on any iphone it worked for me heres what to do if it works for you let me no because ino its a nightmare having a phone with no sound 1st thing go to settings general accessibility scroll down assistive touch click it on when you get the white dot click on it you will have 4icons click on the device 1 you will then see volume up and down and also have little bell make sure volume is up and the bell is not muted there you quick fix for sound also you dont have to keep the assistive on  you can then turn it off you will have all sounds incoming call the lot enjoy hope it helps

  • HT1414 My speaker works but the phone appears to be stuck in silent mode.  Already did a restore!

    I have an Iphone 4s that works fine the speaker is working but all incoming calls are silent.  Like it is stuck in silent mode.  I have already dont a restore but still the same.  Can anyone help me?

    You probably did a restore from backup. Do a restore but do not restore from backup. See if that works. if not - service

  • IPhone 3gs stuck in recovery mode, firmware iO 5

    My iPhone is stuck in recovery mode. I have a 3gs, firmware 5.0.
    Before I tried to restore it, my iPhone would randomly shut off, turn back on, and display a notification that said "Activation Required." Now, sometimes my phone would shut off again and return to it's previous working state. However, this time it did not. I put the phone into recovery mode and tried restoring it on my Acer Aspire 1 with Windows 7. iTunes put the phone through the various stages of restoration; Extracting Software, Preparing iPhone for Restore, Restoring Software, Verifying Restore, Restoring Firmware. After all of this, a nice little error message pops up that reads, "The iPhone 'iPhone' could not be restored. An unknown error has occured (1)."
    After this little mishap occured four more times, I decided to click "More Information," and was promptly brought to the help page set up here. I proceeded to troubleshoot by updating to the latest version of iTunes, updating my security, restarting my computer, and so forth until all the necessary precautions were performed. Now it was back to iTunes to try my luck at getting my life back.
    To my delight, I found that this time the restoration process took upwards of forty minutes to complete. However, to my despair, a nice little error message popped up that read, "The iPhone 'iPhone' could not be restored. An unknown error has occured (-1)." Ah, a different error message! i thought, feeling as if there was hope in fixing my phone. I clicked "More Information" and skimmed through the specific error messages, looking for that lucky -1. Nothing.
    I need help. I have attempted to restore my phone a dozen times since this occurence, and I'm growing tired of going through the same process over and over and getting the same result. My phone is stuck in recovery mode now. I've tried restoring the phone on 2 different computers, to find out if, in fact, the problem was my iPhone and not my computer.
    Some important information you may need to know in order to help me solve my problem:
    iPhone 3gs
    Running iOS 5.0
    Using iTunes 10.5
    On an Acer Aspire One Netbook
    Running Windows 7
    All security updates installed as of November 7, 2011
    Also iTunes 10.5 on Acer Aspire 57354774 laptop
    Running Windows 7
    Reply ASAP with a solution please!

    Hello,
    I have an iPhone 3GS which I updated with the last firmware (iOS 5) 2 weeks ago. Everything goes ok.
    And suddenly, while the phone was recharching. It asked me to activate it but I was unable to do it as it was rebooting constantly every time I connected it to iTunes.
    I tried both 2 restore modes (Restore and DFU) but since I can't achieve a restore with the last Apple iOS 5 firmware. I got the error code 1.
    I I tried on 3 different computers but same error. I really don't know what to do next...
    I already called Apple Customer Care and I'm still waiting for an answer. I let you know.
    And you, did you manage to get your iPhone back alive ?

  • How do i fix my iphone 5 stuck in recovery mode and wont let me restore it just says unknown error 1603 has occured

    how do i fix my iphone 5 stuck in recovery mode and wont let me restore it just says unknown error 1603 has occured

    http://support.apple.com/kb/TS3694#error1603
    Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
    http://support.apple.com/kb/TS3694#error1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.

  • IPhone 3GS stuck in recovery mode while updating to iOS 6.1

    Hello there, I was updating my iPhone 3GS(New Bootrom) from iOS6.0 to iOS 6.1. While it was updating, iTunes suddenly ends up saying error and now my iPhone is stuck in recovery mode loop. I've tried DFU mode on my iPhone and try to kick it out by using TinyUmbrella but the computer doesn't reconize it. And when it was on recovery, iTunes doesn't reconize too, a window pops up and says i have to install 'Apple Mobile Device'. I've re-install and install iTunes a couple of times and nothing is working. Switching on and off the iPhone doesn't work too. Please, someone help me with this problem! I really do not know what to do! Please reply this As Soon As Possible!

    Ok. I have spent the last 8 hours researching this problem and have the absolute 110% answer to everyone's problem with this issue.
    Error 13 and 14 : Are checksum problems with the firmware image that is in the update package.
    The update package is a .ipsw (IPod or IPhone SoftWare). This file is actually just a .zip renamed .ipsw.
    The error is caused by a failure to download a crc-free version of the file. Not really sure why there are so many crc problems with the iphone updates, but Apple does not check the integrity of the update package before wiping your current version of IPhone software and that is why all IPhones that start an update with a bad update package end up in recovery mode. These errors are NOT related to the iTunes installation, antivirus software, or firewalls.
    Recommendation : use a program like "Object Fix" (Freeware) to verify the integrity of the file prior to commencing with any new updates. You will have to keep trying to download it until you get a error free file. Once you have a CRC error free file this problem will go away. (I thought TCP/IP helped get rid of CRC errors.)
    I had another problem and that was...
    Error 1603 and 1604 : These are USB driver connectivity problems.
    Recommendation : FULLY uninstall and re-install itunes software as stated in the Apple support documentation. Be sure to reboot between each step and these problems should clear themselves up. In addition, firewalls and anti-virus software may cause these errors as well.
    Finally, shame on apple for not properly documenting their software so that end users do not have to decrypt their error messages with no true support to solve the issues. These are problems that enough people have had that there should be specific documentation on these problems.

  • After attempting to update to ios 7, my iphone is stuck in recovery mode and will not connect to the itunes software server.

    After attempting to update to ios 7, my iphone is stuck in recovery mode and will not connect to the itunes software server.  I have already tried the resetting with power swich and home button and plugging into computer but it says the "iPhone software update server cannot be contacted."  I am locked out of my phone.  Does anyone have any idea how to resolve this issue and get the phone working again.  I will add that I am now trying to restore it on a different computer with a lower version of itunes, but the computer that it initially happened on had the updated itunes and gave me the same result ... nothing.  Thanks for your help in advance.

    Try going to recovery mode as described here.  You may have to try this more than once to succeed.
    Use the original iTunes that the iPhone synced with.
    http://support.apple.com/kb/HT1808

  • My iPhone is stuck in headphone mode. I've tried inserting and removing headphone jacks, blowing compress air into jack opening, using warm air from hair dryer, but

    My iPhone is stuck in headphone mode. I've tried inserting and removing headphone jacks, blowing compress air into jack opening, using warm air from hair dryer, and a number of setting changes, but the iphone is still in headphone mode.

    it's a hardware issue
    https://discussions.apple.com/thread/1343532?start=315&tstart=0

  • My iphone is stuck in recovery mode and wont recover in itunes

    hi all, my iphone is stuck in recovery mode, have tried holding down buttons and reconnecting to itunes, it still is frozen,,,what do i do????

    I'm having the same problem!!! My iphone worked perfectly until all of a sudden it says i can't receive or make calls and that i need to restore it? So i try but then right in the middle of restoring it, my iphone just disconnects by itself?

  • My iphone is stuck in restore mode.  I plugged into macbook and ran a restore and it is still stuck

    iphone is stuck in restore mode when i did a rebook.  I hooked up to my macbook and ran a restore.   Itunes ran through the restore and now it is still stuck in restore mode.

    If it won't restore in the regular restore mode, you may want to try putting it in DFU mode if you haven't already. Instructions for this are linked below.
    http://www.iclarified.com/entry/index.php?enid=1034
    Put it in this mode, then do a restore again through your computer.
    Hope this helps you out!

  • My iphone is stuck in recovery mode and itunes will not recognize my phone. I've tried pretty much every trick i can and i still do not know what to do. Someone please help me

    My iphone is stuck in recovery mode and itunes will not recognize my phone. I've tried pretty much every trick i can and i still do not know what to do. Someone please help me

    I've done all of these, even trying a different USB port, and still, nothing. This is really confusing. Windows 8.1 said something to do with USB malfunction or something and nothing works. I need to restore my iPhone quickly and nothing has happened. My cable is not genuine Apple product. iTunes makes the noise that it makes when I connect the device, but it doesn't say 'iPhone is in recovery mode' or even say 'iPhone' in the corner. I am really fed up and would really appreciate a response.
    Thanks,
    Nathan.

  • Iphone 3g stuck in recovery mode(error 14) after failed 3.2.1 update

    My Iphone is stuck in recovery mode after it failed to update to operating system 3.2.1 . When I press restore in itunes, the process stops at around the 20% mark and come up with error 14. I have already manually deleted and redownloaded the update 4 times, reinstalled itunes twice and created a new user on my pc and downloaded and update through this new user and disabled all security but I still keep getting the same error message. My pc is only six months old. I successfully updated the phone to operating system 3.1 a few months ago with no problems. Has anyone found a way to fix this?? This is ridiculous!!

    This is the only way to make sure you've uninstalled itunes completely:
    1. Restart your computer.
    2. After the computer restarts, open Local Disk (C:) located in Computer or whichever hard disk your programs are installed on.
    3. Open the Program Files folder.
    4. Right-click the iTunes folder, choose Delete, and choose Yes when asked to confirm the deletion. Note: This folder may have already been deleted if iTunes was successfully removed.
    5. Right-click the iPod folder, choose Delete, and choose Yes when asked to confirm the deletion. Click Continue if Windows needs confirmation or permission to continue.
    6. Right-click the QuickTime folder (if it exists), choose Delete, and choose Yes when asked to confirm the deletion. Click Continue if Windows needs confirmation or permission to continue.
    7. Right-click the Bonjour folder (if it exists), choose Delete, and choose Yes when asked to confirm the deletion. Click Continue if Windows needs confirmation or permission to continue.
    8. Open the Common Files folder.
    9. Right-click the Apple folder (if it exists), choose Delete, and choose Yes when asked to confirm the deletion. Click Continue if Windows needs confirmation or permission to continue.
    10. Open Local Disk (C:) located in Computer or whichever hard disk your operating system is installed on.
    11. Open the Windows folder.
    12. Open the System32 folder.
    13. Right-click the QuickTime file (if it exists), choose Delete, and choose Yes when asked to confirm the deletion. Click Continue if Windows needs confirmation or permission to continue.
    14. Right-click the QuickTimeVR file (if it exists), choose Delete, and choose Yes when asked to confirm the deletion. Click Continue if Windows needs confirmation or permission to continue.
    15. Right-click the Recycle Bin and choose Empty Recycle Bin.

  • My iphone is stuck in recovery mode. it is about 70 percent done and won't move anymore. This has been going on for the past 2 days. itunes is stuck on the restoring iphone software. Please Help

    My iphone is stuck in recovery mode. The apple logo is up and proceeded about 70percent of the way then it just stops moving. I have looked all over the internet and I am out of warranty. On itunes it reads restoring iphone software. My software was 4.3.2 but it was in the process of being upgraded to 4.3.3 so i dont know if it is being restored to 4.3.2 or 4.3.3... Please help

    I still have the Same Problem. 

Maybe you are looking for

  • Help, My iPod just turns on and off...my PC doesn't even get to "see" it.

    I just got the 5G 60 Gig iPod. I was charging it for the first time. And of course windows wanted to jump on in. iTunes started up and wanted to transfer music, the unit wanted it's initial setup, but iTunes switched it over to th Do Not Disconnect m

  • Select multiple groups of contiguous images in Grid view

    In Windows, the following conventions should be followed when selecting images in the Library module or Filmstrip. 1. select an image by left mouse click 2. extend the contiguous selection by Shift+left mouse click on the last image in group 3. add t

  • Subvi access label of input wire

    Hi is there a way to access the name/label of an input wire connected to a vi (or an XControl for that matter)? as an example: I would like to have an vi that takes a double as input and returns a string with "The wire with the label %s has the value

  • Database table Analyze

    <p> {color:#339966}Hi, I have a very basic question. I want to know what exactly happens in the Database architecture when a table analyze is done by gathering the stats. How does this analyze helps in performance of queries. Thanks Mns{color} </p>

  • Excise entries

    Hi expert I had done excise po for consumable material, but the  RG23 part 1 & Part 2 entries i have got of capital good..i have check the Po account assigment its not a assets.i have also check in J1ID material is define as Consumable. Please give m