Iphone 4S stuck on ringer

Hey,
My iphone 4S will not play from the external speaker from any app, music, you tube etc.  The only time I get sound externally is when it rings or voice memo playback! I can adjust ringer volume when I have an incoming call or during the call, but if I try and adjust in normal mode it just says ringer and displays the speaker icon.  Have tried restoring and backing up but no joy.  Even set up as new Iphone but exactly the same.  Any ideas?

Assuming your device has been backed up you could try putting it into DFU mode to restore.
Connect the device to your computer running iTunes
Press the power & home buttons until the device resets
Release power and contiune to hold the home button for 10 seconds
The device should be detected in "Recovery Mode".
tt2
Message was edited by: turingtest2 (after failing to embed a "how to" video)

Similar Messages

  • Hi Guys,  My iPhone is stuck in a mode where it thinks the headset is still plugged in.   I cant get any sounds through the speaker. Cant hear sms or emails arrive. If the phone rings i hear it but pple cant hear me or i cant hear them.  The phone works f

    Hi Guys,
    My iPhone is stuck in a mode where it thinks the headset is still plugged in.
    I cant get any sounds through the speaker. Cant hear sms or emails arrive. If the phone rings i hear it but pple cant hear me or i cant hear them.
    The phone works fine with the headphones plugged in.
    I have tried all the usual solutions, inserted and removed the headset (at least 50 times)
    Soft reboot
    full restore
    Nothing seems to work. I have searched on this and it seems to be a well know issue but there doesnt seem to be any firm solutions that i can find to fix the problem

    If no change after inserting and removing the headset at least 50 times, powering the iPhone off and on, an iPhone reset, and restoring the iPhone with iTunes as a new iPhone or not from the backup, the iPhone has a hardware problem.
    Make an appointment at an Apple Store if there is one nearby.

  • IPhone still stuck in headset mode? Try this.

    So your iPhone is stuck in headset mode. No sound from earhole speaker, no sound from external speaker unles you use speaker mode during a call. When you change volume, the volume icon says ringer(headphones) even though no headphones are plugged in. Every time you plug in your headphones, the ipod function starts playing songs, and stops when you unplug.
    You've tried cleaning the jack. You've looked at previous posts in this forum, and at the knowledgebase.
    http://discussions.apple.com/thread.jspa?messageID=6598659
    http://support.apple.com/kb/TS1205
    http://hackint0sh.org/forum/showthread.php?t=18044
    None of these suggestions have helped, and you don't want to hard reset your phone. This is what i think worked for me.
    1. Plug in headset when iPhone is locked.
    2. Hold down the power button so that the "slide to power off" bar appears.
    3. Remove the headphones.
    4. Push the "Cancel" button at the bottom of the screen.
    5. Go to the phonepad and see if pressing the buttons now produces sound.
    (It's possible that I've forgotten something that I did, so the next time my phone locks, I'll try the same method again and update this post. Unless someone else is having the problem and wants to verify.)
    ~ Matthew Lowe

    The root cause is either the presence of lint/dust in the switch or the inadequate resilience of the spring.
    Nod, that's the cause of a similar problem, and cleaning the jack tends to help. My problem is a software problem, though, so cleaning and repeatedly inserting the headphones won't help.
    With the problem I have, the iphone responds to the headphones being inserted or removed, so it knows they're there (or not there) but it fails to switch the speaker output.

  • Iphone 4 stuck in headphone mode

    Iphone is stuck in headphone mode

    Up & Down buttons on the side show "headphones" when it should say "ringer"
    iphone thinks headphones are in the jack (even though they aren't).  I just had this problem today and was able to fix it by putting my ear buds in several times and pulling them back out.  Then I used a can of compressed air to blow out the headphone jack.  Took a couple times, but it's back to allowing me to hear my callers. 

  • IPhone 5s doesn't ring and goes directly to voice mail. Do not disturb is disabled. Have reset network settings and did a hard reset.  What am I missing?

    iPhone 5s doesn't ring and goes directly to voice mail. Do not disturb is disabled. Have reset network settings and did a hard reset.  What am I missing?

    Call your phone carrier - that's a problem for them to resolve.

  • My Iphone 5s doesn't ring anymore (sms, whatsapp, phone call, reminder in the calendar, etc)

    My Iphone 5s doesn't ring anymore (sms, whatsapp, phone call, reminder in the calendar, etc) I can't find why.
    I trieds to go on Youtube and for that I have sound so it is just for the rings.
    Can somebody help me please?
    Thank you so much!
    Mary

    Have you checked your mute switch (right above the volume buttons)? If you see orange, it is muted and will affect the rings, but not the audio on YouTube.
    Just toggle the switch so you don't see the orange and check again.

  • My iphone 5 won't ring, only vibrate

    My iphone 5 won't ring, it only vibrates

    Reset all settings.
    Settings>General>Reset>Reset all settings
    If this doesn't work then I would try restoring the device.
    Make sure you make a valid back up of your device before hand.
    After the restore, set the device up as new. If it doesn't work after that, then your device may need serviced.

  • My iPhone 5 won't ring at all.  Phone calls, texts etc. are all vibration only even though under Sounds everything is correct.  What am I doing wrong?

    My iPhone 5 won't ring .  It only vibrates for calls, texts, etc.  what am I doing wrong?

    Hi, Mylenium,
    Thanks for your prompt reply, I'm afraid it hasn't helped. I don't see anything wrong in my device manager.
    I have also gone and updated every driver, especially the motherboard chipset and the Sata Intel Rapid Storage Technology driver.
    Unfortunately, this hasn't made any difference.
    Any other suggestions?
    Many thanks in advance!
    Hugo

  • My iphone is stuck,  it says connect to itunes, and when I aconnect it to my pc, my pc says restore data but everything will be erased and I don't wanna lose everything. please help me

    my iphone is stuck,  it says connect to itunes, and when I aconnect it to my pc, my pc says restore data but everything will be erased and I don't wanna lose everything. please help me

    If you have a graphic of iTunes and a cable displayed on your iDevice then it is in Recovery mode.
    Check this to try an "exit"
    http://osxdaily.com/2011/01/08/iphone-recovery-mode/

  • I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer.

    Hi everyone! I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer, so I can't put it in recovery mode or someting like that... What can I do?? I tried everything they tell me to do in the apple support but nothing seems to work. Thank you!

    No problem, glad to help!
    Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

  • My 5s iPhone is stuck on Itunes icon and a cable. I tried to do a restore but the iPhone isn't updated. All the labs that i send it to, couldn't fix it, what I can to? help! thanks.

    My 5s iPhone is stuck on Itunes icon and a cable. I tried to do a restore but the iPhone isn't updated. All the labs that i send it to, couldn't fix it, what I can to? help! thanks.

    Sounds like a 'stuck' Shift key. You could try to take the key off and put it back on yourself (should be some info on that from ifixit) or just take it to your local Apple Store and have them fix it.
    Clinton

  • IPhone 3gs stuck in recovery mode, firmware iO 5

    My iPhone is stuck in recovery mode. I have a 3gs, firmware 5.0.
    Before I tried to restore it, my iPhone would randomly shut off, turn back on, and display a notification that said "Activation Required." Now, sometimes my phone would shut off again and return to it's previous working state. However, this time it did not. I put the phone into recovery mode and tried restoring it on my Acer Aspire 1 with Windows 7. iTunes put the phone through the various stages of restoration; Extracting Software, Preparing iPhone for Restore, Restoring Software, Verifying Restore, Restoring Firmware. After all of this, a nice little error message pops up that reads, "The iPhone 'iPhone' could not be restored. An unknown error has occured (1)."
    After this little mishap occured four more times, I decided to click "More Information," and was promptly brought to the help page set up here. I proceeded to troubleshoot by updating to the latest version of iTunes, updating my security, restarting my computer, and so forth until all the necessary precautions were performed. Now it was back to iTunes to try my luck at getting my life back.
    To my delight, I found that this time the restoration process took upwards of forty minutes to complete. However, to my despair, a nice little error message popped up that read, "The iPhone 'iPhone' could not be restored. An unknown error has occured (-1)." Ah, a different error message! i thought, feeling as if there was hope in fixing my phone. I clicked "More Information" and skimmed through the specific error messages, looking for that lucky -1. Nothing.
    I need help. I have attempted to restore my phone a dozen times since this occurence, and I'm growing tired of going through the same process over and over and getting the same result. My phone is stuck in recovery mode now. I've tried restoring the phone on 2 different computers, to find out if, in fact, the problem was my iPhone and not my computer.
    Some important information you may need to know in order to help me solve my problem:
    iPhone 3gs
    Running iOS 5.0
    Using iTunes 10.5
    On an Acer Aspire One Netbook
    Running Windows 7
    All security updates installed as of November 7, 2011
    Also iTunes 10.5 on Acer Aspire 57354774 laptop
    Running Windows 7
    Reply ASAP with a solution please!

    Hello,
    I have an iPhone 3GS which I updated with the last firmware (iOS 5) 2 weeks ago. Everything goes ok.
    And suddenly, while the phone was recharching. It asked me to activate it but I was unable to do it as it was rebooting constantly every time I connected it to iTunes.
    I tried both 2 restore modes (Restore and DFU) but since I can't achieve a restore with the last Apple iOS 5 firmware. I got the error code 1.
    I I tried on 3 different computers but same error. I really don't know what to do next...
    I already called Apple Customer Care and I'm still waiting for an answer. I let you know.
    And you, did you manage to get your iPhone back alive ?

  • How do i fix my iphone 5 stuck in recovery mode and wont let me restore it just says unknown error 1603 has occured

    how do i fix my iphone 5 stuck in recovery mode and wont let me restore it just says unknown error 1603 has occured

    http://support.apple.com/kb/TS3694#error1603
    Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
    http://support.apple.com/kb/TS3694#error1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.

  • IPhone 3GS stuck in recovery mode while updating to iOS 6.1

    Hello there, I was updating my iPhone 3GS(New Bootrom) from iOS6.0 to iOS 6.1. While it was updating, iTunes suddenly ends up saying error and now my iPhone is stuck in recovery mode loop. I've tried DFU mode on my iPhone and try to kick it out by using TinyUmbrella but the computer doesn't reconize it. And when it was on recovery, iTunes doesn't reconize too, a window pops up and says i have to install 'Apple Mobile Device'. I've re-install and install iTunes a couple of times and nothing is working. Switching on and off the iPhone doesn't work too. Please, someone help me with this problem! I really do not know what to do! Please reply this As Soon As Possible!

    Ok. I have spent the last 8 hours researching this problem and have the absolute 110% answer to everyone's problem with this issue.
    Error 13 and 14 : Are checksum problems with the firmware image that is in the update package.
    The update package is a .ipsw (IPod or IPhone SoftWare). This file is actually just a .zip renamed .ipsw.
    The error is caused by a failure to download a crc-free version of the file. Not really sure why there are so many crc problems with the iphone updates, but Apple does not check the integrity of the update package before wiping your current version of IPhone software and that is why all IPhones that start an update with a bad update package end up in recovery mode. These errors are NOT related to the iTunes installation, antivirus software, or firewalls.
    Recommendation : use a program like "Object Fix" (Freeware) to verify the integrity of the file prior to commencing with any new updates. You will have to keep trying to download it until you get a error free file. Once you have a CRC error free file this problem will go away. (I thought TCP/IP helped get rid of CRC errors.)
    I had another problem and that was...
    Error 1603 and 1604 : These are USB driver connectivity problems.
    Recommendation : FULLY uninstall and re-install itunes software as stated in the Apple support documentation. Be sure to reboot between each step and these problems should clear themselves up. In addition, firewalls and anti-virus software may cause these errors as well.
    Finally, shame on apple for not properly documenting their software so that end users do not have to decrypt their error messages with no true support to solve the issues. These are problems that enough people have had that there should be specific documentation on these problems.

  • IPhone 5 stuck in recovery mode. Not recognized in iTunes for Windows

    Hi,
    My iphone 5 stuck during update to 8.2. It is now frozen in recovery mode, showing a 'connect to itunes' screen. The problem I have is that (the recently upgraded to 12.0.1) itunes is not recognizing my device. I have tried all of the suggestions here: iPhone, iPad, or iPod touch not recognized in iTunes for Windows, to no avail. I have not removed iTunes and reinstalled to test that, as I am concerned this will destroy the backups of my phone - which I will now desperately need once the phone is recovered.
    Has anyone got any suggestions?
    Cheers

    Hi AmberX92,
    If you receive an error 3194 when attempting to restore your iPhone, I would suggest that you troubleshoot using the steps in this article - 
    Error 3194, Error 17, or "This device isn't eligible for the requested build"
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

Maybe you are looking for

  • Why is the ITunes Store in South Africa so limited

    why is the ITunes Store in South Africa so limited

  • Warehouse movement Roport

    Dear all, Few days ago a material is shown in Storage Type suppose 916 and xxxxx Storage bin.But now it does not shows any stock.That means some warehouse movement can happen.So I want to know a report from where I can find out what is the ware house

  • AQ DEQUEUE Stops working in 10.1.2 after restart

    We have many BPEL processes in 10.1.2 thats get kicked off by reading a message from Queue. Whenever we restart server from maintenance or anyother reason. All the enqueued messages are not getting picked up by BPEL. The only workaround for this is t

  • Can someone Help me regarding Apps Transfer Purchase

    I really can't sync my application in my Itunes even though my computer was already authorized. Everytime I'm going to transfer purchase, it kept on saying Can't copy my Ipod and there's this "Worldwide" thingy because my computer is not authorized..

  • After loading grocery.ldif, LDAP won't start up

    I loaded OID 3.0.1 on an existing Oracle 9i rel 1 patch 3 DB, W2K machine. I setup Oracle Context and imported tnsnames into OID and was able to log in with sqlplus using LDAP instead of tnsnames. I ran grocery.sql from sqlplus to load tables. When I