IPhone 4S switches off at low battery levels
Hello everyone,
My iPhone 4S with less than 2 years is having problems. It powers off when it reaches (not so) low battery levels. It happened at as high as 16% of battery, and although it mostly happens when I try to open apps like Facebook or the Camera, it has happened also with stuff like the Phone app. It gets even worse, because although it still has more than 10% battery charge, the only way to power it up again is by pluging it to the transformer.
Could this be battery related or is this a know iOS issue? I have been really careful with the battery since day one, so I would expect not to have such problems. It's really annoying, because I now have 85% of battery usage, not 100%, and I never know when it's going to power off next.
Can anyone relate to this? Any suggestions about what I should try to fix it?
I'm on the latest update of iOS 7.
Thanks a lot!
The best way to test the battery and make sure the level being displayed is as correct as it can be is to let the battery die completely, then plug it in to charge to 100% without using it. After that, see when it powers off. You can also make an appointment at the Genius Bar at Apple or your Authorized Apple Service Provider and they can test your battery.
Similar Messages
-
HT201412 the iphone keep switching off even the battery is fully charged.
please can you help me solve this problem? My iphone keep switchs off. even the battery is fully charged.
some one should help....
-
My iphone 4 suddenly switched off on 70% battery and now it wont switch back on? my home button does not work either so i can not do the normal reset please help!!
Sophierose21 wrote:
my home button does not work
Then it looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required... Be sure to make an appointment first... -
my Iphoe is switched off and still viberates. how should i handle that problem?
Try to set it up as new device and don't use the backup afterwards:
How to back up your data and set up as a new device -
my iphone is switched off suddenly n then it wont b started it continously shows the apple logo then again switched off automatically and when i charge it so it was switched on and after a long time then it shows battery low and then its also show 4% battery what would i do im very tensed please help ...
Hello s0ha1b
If all you get is the Apple logo and it powering off, then the next step is to put your iPhone into recovery mode and then use iTunes to restore it. If you have a back up, then you can put that on there to once the restore is complete.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Regards,
-Norm G. -
iPhone 5 switches off saying battery low when it shows 42% battery remaining , if I leave it ten mins it turns back on and I's fine ? Had anyone else had this problem?
Hi Dean,
Yep, there are others too...:
https://discussions.apple.com/thread/5311898
Cheers,
Jason -
my iphone get switched off between when i use camera or any internet appliaction, even though my battery is at 100% please help ....!!!
i use iphone 3gs model no A1303... AND SOME OF THE APPLICATION LIKE SAFARI & FACEBOOK AND WHATS APP GET CLOSED IN BETWEEN WHEN I AM USINGGo to itunes and restore your phone from backup, make sure you have a recent backup in itunes of your phone first.
-
My iphone 5s have problems with the battery to upgrade to IOS8, the problem is that low battery level quickly since I upgraded to IOS8.
recalibrate your battery.
-
IPhone 5 Switch off at about 30% battery. What can i do?
Right now i have still 15%, but Many Times i have around 30% and the iPhone is switching Off because Off the battery. What can i do? Is the Problem the battery?
Let's the next step would be to restore your IOS but make sure you backup first http://support.apple.com/kb/HT1414?viewlocale=en_US&locale=en_US
if that doesn't help then restore your phone as new and see if your battery still drains. -
IPhone 3G switches off automatically
My iphone 3G switches off automatically when the carrier GSM signal is very low. Has anybody faced this problem? If so please let me know about the possible solution. Thanks.
No, it never works no matter where I am, its stuck. I haven't had 3G no matter where I've been for over a month now. I am sitting right next to other iphone users whose phone is on 3G with good signal strength (same iphone 3g and sw I'm running). It's always gotten 3G at my house, now it never stays on. I'm running the most recent SW. In Network settings I can switch it on, but the second I leave the screen it switches off. So annoying because I get feedback from computers and tv and it's SLOW!
-
My 3 week old iPhone 4S switched off during a call and won't switch back on. Any suggestions??
Sounds like a dead battery. Try plugging it into a charger.
-
Iphone getting switched off..
My iphone 4s was mistakenly kept in freezer..
when i took it out of freezer it ws switched off so i used dryer to stable its temp.
since that day it gets switched off whenevr its battery reaches 80..
nd whn i try to switch it on it shws that its is not charged and as soon i connect the charger and my iphone gets on the battery shows 80% nd so..
So please give me some advice about what to do..am using it from 2 years..That could be a symptom of the battery going bad.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
My iphone is switching off and on by itself
my iphone is switching off and on by itself. just after i've downloaded a new ISO software and i've installed it.
this is happening to my phone, i changed the battery, i tryed the logic board in another phone and it worked fine, there dosnt seem to be much else in there, still cant get it going.
-
Iphone 4 switch off automatically
My iphone 4 switch off automatically & nowadays work only when its charging..and the power button is not working ..Is any one facing the same problem and whats the solution...its becoming waste for me.
Regards
SrinivasHardware problem.
-
my iphone 4 switches off when i insert the sim. dont know what to do??
Just want to inform you, that you are not alone. I wish to report the same problem. My brand new iPhone4 can not be switched on in the normal way. I have to press the on/off button and the home button for 10 sec. Phone restarts with the apple logo, than operates normally as long as i keep it awake. When i switch it off, it can be switched on for only 1 min. After 1 min it can not be switched on again, it has to be restarted by pressing the on/off button for 10 sec to restart it from scratch. This must be a serious hardware/software problem. Phone is not usable, I have to return it to the provider (T-Mobil Germany).
Maybe you are looking for
-
Pasted lightboxes do not show when uploaded but do on browser preview
I created the lightbox display on the first page and then as i worked from page to page i would paste the original lightbox to the new page and replace the images and the captions but when i upload the site it doesn't show the lightboxes on the pages
-
Hi, I develop a software in "Oracle database 11g express edition", now I want to change the environment to be the end user environment (for the database and the application together). 1. Please help me and tell me what I need to do 2. after this chan
-
Stock determnation for sales order stock
Hi all, for our SAP retail solution - we have requirements for moving Consignment stock to Sales order stock for home delivery . Then Sales order stock needs to be withdrawn for inter company 643 movement . The stock determination is maintained as K
-
I just upgraded to Leopard and miss one thing a lot from Tiger. For work, I used to compress PDFs with Tiger to send them by mail and now, that option has been removed from Leopard.... It's just impossible for me to send PDFs as big as 10mo by mail.
-
How to filter invalid XML character
I need to form an XML document in the program. There are some invalid characters like 0x8. How can I remove the invalid XML characters? Is there any existing tool (function) I can use to check whether the character is an invalid or valid XML characte