IPhone 4S top of screen image appears at bottom of screen, there is flickering,
The screen on my iphone is showing the top part of the screen at the bottom of the screen. A system reboot hasn't helped - the power/lock combo. The images on the screen are flickering and jittery in some apps but perfect in others. Can someone help me to solve this? All help would be greatly appreciated. After a reboot thing there is a discoloured oval in the screen and the edges are faded.....
Hi Rrardo,
Welcome to Apple Support Communities.
It sounds like there is an issue with the video displayed on your iPhone. The article linked below should be able to help you resolve the issue either through troubleshooting or service.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Display image issues
This can include bright or dark pixels, lines in video, or sections of video missing.
Try turning iPhone off and then on again.
Verify the issue is not content related, by viewing different content.
If the image is too dark, adjust the brightness. In General Settings choose Brightness and Wallpaper and slide the slider.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
I hope this helps.
-Jason
Similar Messages
-
HDR Pro on CS 5 - Merged image appears but bottom with save buttons cut off??
When I select photos to merge, either via Bridge or within CS5 (Automate/Merge to HDR Pro), the Merged image appears over the CS5 screen. However, the bottom of the HDR screen with the photos selected for the merge along with the Cancel & Save buttons are cut off. The only way for me to exit HDR is to force quit.
My monitor resolution is 1440X900 which is better than the 1024x768 required for CS5.
I noticed the same problem in Terry White's video on Youtube describing workflow between Lightroom & CS5 HDR Pro (http://www.youtube.com/watch?v=rab25UTe6HY) as well as a couple of other users mentioning the problem to Zeno Bokor of Adobe (http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-78e5a.h tml).
Does anyone have a solution???
Thanks.I found the soluion - after spending over an hour with Adobe phone support (800-833-6687) - of which 45min was being on hold.
It turns out that for some computers, Photoshop CS5 doesn't automatically work as efficiently as it could with the monitor resolution, even if the resolution is > than the minimum 1024 X 768. This is more frequent in those that have had older versions of Photoshop in them. This causes part of the screen to be cut off when going into HDR Pro.
One has to "prime" CS5 to recognize one's computer monitor settings. How to do:
Close out of PS CS5
Go to system preferences and select hardware settings/display (For PC would have to go through Control Panel/Hardware/Display)
Change monitor setting to one recommended by Adobe: 1024 X 768 or 1280 X 800
Save changes. Monitor will look less clear if you have been using higher settings...it's ok for now.
Now open CS5 again and access HDR Pro all three ways available, i.e. via Bridge, Mini Bridge and through PS under File/Automate.
Verify that the entire screen is visible including all thumbnails and Save/Close buttons.
Close out of CS5.
Go back to System Preferences ( for PC, go through Control Panel) and change back to your preferred resolution.
Voila! When you open CS5 again you should be able to see the entire screen.
For example, I use a Macbook Pro with OS 10.6.7 and the monitor resolution was set to 1440 X 900. However, I still couldn't see the bottom of the screen with the Save/Close buttons so couldn't save any work (had to force quit or escape to exit HDR). After doing the above steps, I am now able to use HDR Pro w/o problem and access the Merge via all three modes.
Via Mini Bridge - Choose photos to merge--> Tools (above photos, last on right in Content bar) --> Photoshop --> Merge to HDR Pro
Via Bridge - Choose photos to merge--> Tools (Tool Bar beside "Adobe CS5 Bridge" at left top of screen; 3rd from end) --> Photoshop --> Merge to HDR
Via inside Photoshop - File --> Automate --> Merge to HDR
Since this seems to have affected several people and is a simple solution, I have asked the supervisor I spoke to, Laurie, to please have someone in Adobe post this solution.
Hope this helped.
MJC -
Iphone 6 top of screen goes black
I'm having an issue where the top fourth of my screen slides down and is blacked out at random times. I haven't noticed anything in particular that makes it happen. It's happened in the middle of filming a video and while playing games and while surfing safari. It goes away when I press the home key. It's not the search bar- just a big blacked out block. Any ideas?
Hi abenson0420,
If you are having issues with your iPhone's screen going partially blank during use, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
iOS: Force an app to close
Next, I would try restarting the iPhone -
Turn your iOS device off and on (restart) and reset
If the issue is still present, you may want to restore the iPhone as a new device -
iOS: How to back up your data and set up your device as a new device
Thanks for using Apple Support Communities.
Best,
Brett L -
i have a symbol that has appeared on my iphone 4s top right just left off the bluetooth sign, it's an arrow on a circle with a padlock in the middle any idea where it came from and what it is
That's the portrait orientation lock (keeps the screen from rotating to landscape mode). To turn it off, double-tap the home button, swipe the list at the bottom to the right, then tap the left-most icon (to the left of the music controls).
-
I took my Iphone 4 to an Apple retail store. It had a cracked screen and I got and out warrantee replacement for $149. Everthing works but the display is subpar. The wallpaper and images appear muddy yellow and the colors appear washed out.
Can I exchange it for another one?SharmFarm wrote:
Good ev Ning Mario49 firstly I would like to say a great thank you for your attention to trying to help me,,,,, i have looked at the links and will try everything stated first thing…
Hi Mario,,,,
I tried everything in your reply,,, thank you again,, I had done that once before and all was working great,,
I have just now tried the Reinstall via iTunes, about 20 into the download, the iTunes logo on the phone disappeared, and the Apple Logo appeared again,,, I waited until the iTunes stated that the download had finished, and the install was in progress,,,
Nothing happened, still the Apple Logo was visual on the screen, iTunes never recognised the phone which it was on my iTunes account previously,,,
Still just a bunch of lines, maybe 5 or 6 so small writing,, I personally can not read what it is telling me, someone said it reads, incorrect shutdown,,,????????
Please advise,???
I am now at a loss,,, I really became excited when I saw the iTunes icon after putting the phone into restore,,,???
Thank you again
D -
Today for some reason my Ipad won't tether properly. The iphone says it's connected and on the Ipad next to Wi-Fi in settings shows I'm connected but at the top left of the screen there is no connection icon and I cannot load and display web pages. My Ipad is about three weeks old and I have never had this problem before. I have rebooted but this did not solve my problem.
Any ideas?iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I made a reverse radial gradient to look like "sunlight" and I would like to move it to the top of my image to appear like the light is coming from above, but it won't allow me to move the radial gradient anywhere. I have CS6. Help please
Assuming you did this with a Fill Layer, double-click the thumbnail in the Layers panel to bring up the Gradient Fill dialog, see to it that the [ ] Align with layer checkbox is set, and (while the Gradient Fill dialog is still up) try dragging the gradient to where you want it on the main display. Then [ OK ] out of the Gradient Fill dialog.
-Noel -
Why are some jpg images scrambled when they appear in my screen saver? The same images look fine in Preview and Finder. Some images appear scrambled in the screen saver 'preview' window and the actual screen saver. Other jpg images look fine.
The desktop image is fine, taken from the exact same pool of jpg photos. However, as soon as the slide show screen saver comes on, the images are scrambled. What is it about the apple screen saver algorithm that scrambles the pics?
-
Images appear in reverse on iMovie '08 video screen.
How do I reverse the video images appearing on the iMovie preview screen?
When using my iSight camera to import video directly into iMovie '08, objects appear in reverse. i.e. When I wave my right hand in front of the camera, it appears on the left side of the screen.
When I'm not using iMovie, the images appear correctly on the iSight Screen.Nope: optical illusion!
When you use your iSight camera with, for example, iChat or PhotoBooth, the images are reversed, so that you look the same to yourself as you do when you look in a mirror.
"..When I wave my right hand in front of the camera, it appears on the left side of the screen.." ..yes; that's how you look to other people in everyday life! ..When you look in a mirror and wave your right hand ..look carefully: your mirror image is waving his left hand!
When you look at your image as shot by your iSight, you'll see that if you shot yourself waving your right hand then it really is your right hand which is waving at you in iMovie!
The Apple people purposely switched the image in iChat AV (..and maybe other iSight applications..) so that you would look - to yourself - as you do when you look in a mirror, because that image looks familiar to you. (The image which is shown on someone else's screen when you're using iChat AV, however, shows you the correct way round, and not as reversed and seen in a mirror.)
So you're seeing yourself the correct way round in iMovie .,as everyone else sees you ..a bit unnerving at first! -
I'm having trouble with something in firefox, it's quite minor but still bugs me. Last night suddenly when I right-click-view-images in firefox, they appear centered and against a black background. It's usually meant to be a white background and the image appearing at top left. I can't remember what I did to change this if it's my fault; if someone knows how to revert it I'd be thankful.
cor-el : thanks for the pointers! I wish the solution isn't an add-on every time ... if such long-standing behaviour is going to change, the least that could be done is put in an about:config option to get back the old behaviour.
-
HT4865 My iPhone 5c keeps signing recording at the top off screen how do u turn it off
My iPhone 5c keeps signing recording at the top off screen how do u turn it off
http://support.apple.com/kb/ts3805
-
Please make changes for contact image for for full screen... I bought Iphone Only for full screen contact image so please make changes for full screen contact image...
I bought Iphone Only for full screen contact image
Is that so? So you don't use ANY of the other features of the iPhone? You don't use the internet, apps, play games, make calls, take pictures, or ANYTHING else at all? You just wanted full-screen contact image?
I don't believe you...
Please make changes for contact image for for full screen
Tell Apple: http://www.apple.com/feedback/ -
while synchronizing my iPhone 4G with just freshly actualized Apps in the small window at the top of iTunes site appeared the word "aerogram", which is not an App. is it spyware ot what else?
I was curious when this popped up as an app that I could not synch because the computer I was using was not authorized. I had just set up my Iphone and had only installed five app. After a web search I believe the Aerogram is actually part of the id for the Yahoo Mail app as it was the only app that was not listed of the five installed. On another site I found the following info.
App Name: Yahoo! Mail
Bundle ID: com.yahoo.Aerogram
iTunes ID: 577586159 -
As per attached wireless design I have two outdoor access points connected to cisco 5508 controller, everything is working fine only problem is that when I connected iPhone 4,5 and 6 it's showing connected and working! only not showing wireless icon on top of screen (see the attached icon), but when I connected to Android like Samsung it's showing connected and showing icon as well top of screen.
Advanced thanks and highly appreciateI have an iPhone 4, 5 & 6 and when successfully connected to the controller all does have the wireless icon on the top left. I don't think they are connected to the wireless... Might be associated, but not authenticated. Look at the client on the controller and see if they are in the policy state: RUN If they are not in the RUN state, then they are not connected.
-Scott -
Why does my iphone says its blocked and nothing appears on the screen
why does my iphone says its blocked and nothing appears on the screen
Its completly black on the screen and there is a voice saying the screen is blocked nothing seems to work to put the screen on it asks for a code but i cant see any numbers on the screen
Maybe you are looking for
-
Open items switch on for a GL(FS00)
Hi Experts, I have a GL a/c which need to be changed to be open item(Now it is line item management and have approx 100 line items posting) I have opened a new GL having open items(for transfering the amount from old GL) I have blocked the old GL fo
-
Sony HDR-XR520, cant import into FCE 4.1 on my iMac
Can anyone help? I have just bought this new AVCHD camera and when I open FCE log and transfer wont work. Doesnt recognise the camera at all. I have also copied over the folder of the camera but the files appear dimmed out and cant import that way ei
-
I have the Droid Incredible 2 and just recently had to go to Verizon and have a factory reset. I now can't find my purchased ringtones nor ringbacks. Where do I find them? Last time this happened Verizon said I would have to repurchase the music.
-
How to store multiple values associated to one key
hello all In my program I need to store "multiple values associated to one key". for example : key would be ="T" Values are = 2,4,5,1,2Plz tell me which data structure I can use for this purpose. I have tried Hashtable for
-
WLS threads - how to retrieve individual operations?
Hello everybody, can anyone tell me if is there a way to find out which WLS thread is performing each individual operation - for instance, compiling or executing a specific JSP? TIA Paola R.